The Role of Material Efficiency in Environmental Stewardship
Open accessThe DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
Materials production requires a large amount of energy use and is a significant source of greenhouse gas (GHG) emissions, producing approximately 25% of all anthropogenic CO 2 emissions. It produces large volumes of waste both in production and at end-of-life disposal. More efficient use of materials could play a key role in achieving multiple environmental and economic benefits. Material efficiency entails the pursuit of technical strategies, business models, consumer preferences, and policy instruments that would lead to a substantial reduction in the production of new materials required to deliver well-being. Although many opportunities exist, material efficiency is not realized in practice to its full potential. We evaluate the potential for material efficiency improvement, highlight the drivers to realize material efficiency, and anticipate ways forward to realize the potential of dematerializing our lives and the economy to limit the impacts of climate change and remain on a sustainable development path.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The rise and fall of the Environmental Kuznets Curve
Stern, D. I. (2004) · World Development · doi:10.1016/j.worlddev.2004.03.004 · Cited by 4,013
Kummu, M., de Moel, H., Porkka, M., Siebert, S., Varis, O., & Ward, P. J. (2012) · Science of The Total Environment · doi:10.1016/j.scitotenv.2012.08.092 · Cited by 1,300
Material efficiency: A white paper
Allwood, J. M., Ashby, M. F., Gutowski, T. G., & Worrell, E. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.11.002 · Cited by 927 · cited 3×
“(12) more recently reintroduced material efficiency as a climate change mitigation strategy, which has”
BackgroundInfluentialSelf-citationProducts that go round: exploring product life extension through design
Bakker, C., Wang, F., Huisman, J., & den Hollander, M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.01.028 · Cited by 721 · cited 2×
“, refrigerators (53) and washing machines (56).”
BackgroundOpen-loop recycling: A LCA case study of PET bottle-to-fibre recycling
Shen, L., Worrell, E., & Patel, M. K. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.06.014 · Cited by 514
Self-citationThe Environmental Impacts of Reuse: A Review
Cooper, D. R., & Gutowski, T. G. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12388 · Cited by 337 · cited 1×
“In general, reused products displace some primary production but they tend to expand the lower end of the market, thereby providing more product services, but also limiting the expected reduction in demand for new material production (64).”
BackgroundSelf-citationMapping the Global Flow of Aluminum: From Liquid Aluminum to End-Use Goods
Cullen, J. M., & Allwood, J. M. (2013) · Environmental Science & Technology · doi:10.1021/es304256s · Cited by 296
Self-citationCarbon dioxide capture and storage: issues and prospects
de Coninck, H., & Benson, S. M. (2014) · Annual Review of Environment and Resources · doi:10.1146/annurev-environ-032112-095222 · Cited by 268 · cited 1×
“Other options such as carbon capture and storage (16) are difficult to implement due to high costs, high energy use, and the lack of a CO2 infrastructure.”
BackgroundMapping the global flow of steel: From steelmaking to end-use goods
Cullen, J. M., Allwood, J. M., & Bambach, M. D. (2012) · Environmental Science & Technology · doi:10.1021/es302433p · Cited by 268 · cited 1×
“As a result, 50% of all sheet metal made in the world is scrapped during manufacturing (60, 81) and never enters a product, and steel-framed commercial buildings in the United Kingdom are built with double the mass of steel required to meet safety codes (50).”
BackgroundSelf-citationRemanufacturing and Energy Savings
Gutowski, T. G., Sahni, S., Boustani, A., & Graves, S. C. (2011) · Environmental Science & Technology · doi:10.1021/es102598b · Cited by 260 · cited 3×
“In some cases, the remanufactured product may function less well (52), but we lack data on the conditions of this loss in performance and the impacts.”
BackgroundSelf-citation
Cited by
Hertwich, E. G., Ali, S., Ciacci, L., Fishman, T., Heeren, N., Masanet, E., Asghari, F. N., Olivetti, E., Pauliuk, S., Tu, Q., et al. (2019) · Environmental Research Letters · doi:10.1088/1748-9326/ab0fe3 · Cited by 477
Sustainability of reusable packaging–Current situation and trends
Coelho, P. M., Corona, B., ten Klooster, R., & Worrell, E. (2020) · Resources, Conservation & Recycling: X · doi:10.1016/j.rcrx.2020.100037 · Cited by 381
Self-citationIncreased carbon footprint of materials production driven by rise in investments
(2021) · doi:10.1038/s41561-021-00690-8 · Cited by 355
Pauliuk, S., Heeren, N., Berrill, P., Fishman, T., Nistad, A., Tu, Q., Wolfram, P., & Hertwich, E. G. (2021) · Nature Communications · doi:10.1038/s41467-021-25300-4 · Cited by 352
Advances Toward a Net-Zero Global Building Sector
Ürge-Vorsatz, D., Khosla, R., Bernhardt, R., Chan, Y. C., Vérez, D., Hu, S., & Cabeza, L. F. (2020) · Annual Review of Environment and Resources · doi:10.1146/annurev-environ-012420-045843 · Cited by 250
Metadata
- Authors
- Worrell, E., Allwood, J., & Gutowski, T.
- Venue
- Annual Review of Environment and Resources
- Publisher
- Annual Reviews
- Published
- 2016-11-01
- Volume
- 41
- Issue
- 1
- Pages
- 575-598
- ISSN
- 1543-5938 (ISSN-L)
- 1545-2050
- OpenAlex
- W2305697843
- Cited by
- 126
- References
- 15
- FWCI
- 0.73
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The Role of Material Efficiency in Environmental Stewardship. https://app.cochat.ai/papers/10.1146/annurev-environ-110615-085737
- The paper
- Worrell, E., Allwood, J., & Gutowski, T. (2016). The Role of Material Efficiency in Environmental Stewardship. Annual Review of Environment and Resources. https://doi.org/10.1146/annurev-environ-110615-085737
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.