The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
A Transmission Electron Microscopy Study of the Reactivity Mechanism of Tailor-Made CuO Particles toward Lithium
Abstract
The electrochemical reactivity of tailor-made CuO powders prepared according to a new low-temperature synthesis method was studied by a combination of transmission electron microscopy (TEM) and electrochemical techniques. All the processes involved during cycling were successfully identified. We show that the reduction mechanism of CuO by lithium involves the formation of a solid solution of Cu 1 − x II Cu x I O 1 − x / 2 0 ⩽ x ⩽ 0.4 , a phase transition into Cu 2 O , then the formation of Cu nanograins dispersed into a lithia matrix ( Li 2 O ) followed by the growth of an organic-type coating. This one is responsible for the extra capacity observed on the voltage vs. composition curve. During the subsequent charge, the organic layer vanishes first, and then the Cu grains are partially or fully oxidized with a concomitant decomposition of Li 2 O . The formation of Li 2 O and Cu nanograins and then the one of Cu, CuO, and Cu 2 O nanograins on the first discharge and subsequent charge, respectively, were identified by high-resolution TEM studies. These results enabled a better understanding of the processes governing the reactivity of 3d metal oxides vs. lithium down to 0.02 V. © 2001 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
Self-citationParticle Size Effects on the Electrochemical Performance of Copper Oxides toward Lithium
Grugeon, S., Laruelle, S., Herrera-Urbina, R., Dupont, L., Poizot, P., & Tarascon, J.-M. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1353566 · Cited by 693
Self-citationLi Metal‐Free Rechargeable LiMn2 O 4 / Carbon Cells: Their Understanding and Optimization
Guyomard, D., & Tarascon, J. M. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2069372 · Cited by 586
Self-citationCuO: X-ray single-crystal structure determination at 196 K and room temperature
Åsbrink, S., & Waskowska, A. (1991) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/3/42/012 · Cited by 155
CuO cathode in lithium cells—II. Reduction mechanism of CuO
Novák, P. (1985) · Electrochimica Acta · doi:10.1016/0013-4686(85)87015-8 · Cited by 70
Salting-out in intercalation compounds: Removing copper from Cu3Mo6S8 by intercalating lithium
McKinnon, W. R., & Dahn, J. R. (1984) · Solid State Communications · doi:10.1016/0038-1098(84)90817-2 · Cited by 48
Cathodic Performance of CuO Electrode in Propylene Carbonate
Matsuda, Y., TERAJI, K., & Takasu, Y. (1976) · Denki Kagaku oyobi Kogyo Butsuri Kagaku · doi:10.5796/kogyobutsurikagaku.44.363 · Cited by 15
Cited by
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Cabana, J., Monconduit, L., Larcher, D., & Palacín, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201000717 · Cited by 2,361
Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries
Ji, L., Lin, Z., Alcoutlabi, M., & Zhang, X. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00699h · Cited by 2,240
Research on Advanced Materials for Li‐ion Batteries
Li, H., Wang, Z., Chen, L., & Huang, X. (2009) · Advanced Materials · doi:10.1002/adma.200901710 · Cited by 1,803
Li-alloy based anode materials for Li secondary batteries
Park, C.-M., Kim, J.-H., Kim, H., & Sohn, H.-J. (2010) · Chemical Society Reviews · doi:10.1039/b919877f · Cited by 1,703
Zhang, Q., Zhang, K., Xu, D., Yang, G., Huang, H., Nie, F., Liu, C., & Yang, S. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.09.003 · Cited by 1,404
Carbon Coated Fe3O4 Nanospindles as a Superior Anode Material for Lithium‐Ion Batteries
Zhang, W., Wu, X., Hu, J., Guo, Y., & Wan, L. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200801386 · Cited by 1,209
Nitta, N., & Yushin, G. (2014) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201300231 · Cited by 724
Park, J. C., Kim, J., Kwon, H., & Song, H. (2009) · Advanced Materials · doi:10.1002/adma.200800596 · Cited by 652
Fabrication of NiO Nanowall Electrodes for High Performance Lithium Ion Battery
Varghese, B., Reddy, M. V., Yanwu, Z., Lit, C. S., Hoong, T. C., Subba Rao, G. V., Chowdari, B. V. R., Wee, A. T. S., Lim, C. T., & Sow, C.-H. (2008) · Chemistry of Materials · doi:10.1021/cm703512k · Cited by 643
Prospective materials and applications for Li secondary batteries
Jeong, G., Kim, Y.-U., Kim, H., Kim, Y.-J., & Sohn, H.-J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00831a · Cited by 616
Fully Reversible Homogeneous and Heterogeneous Li Storage in RuO2 with High Capacity
Balaya, P., Li, H., Kienle, L., & Maier, J. (2003) · Advanced Functional Materials · doi:10.1002/adfm.200304406 · Cited by 605
Li-Storage via Heterogeneous Reaction in Selected Binary Metal Fluorides and Oxides
Li, H., Balaya, P., & Maier, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1801451 · Cited by 590
Zhao, Y., Wang, L. P., Sougrati, M. T., Feng, Z., Leconte, Y., Fisher, A., Srinivasan, M., & Xu, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601424 · Cited by 586
Exploring Anomalous Charge Storage in Anode Materials for Next-Generation Li Rechargeable Batteries
Kim, H., Choi, W., Yoon, J., Um, J. H., Lee, W., Kim, J., Cabana, J., & Yoon, W.-S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00618 · Cited by 527
Electrode Materials, Electrolytes, and Challenges in Nonaqueous Lithium‐Ion Capacitors
Li, B., Zheng, J., Zhang, H., Jin, L., Yang, D., Lv, H., Shen, C., Shellikeri, A., Zheng, Y., Gong, R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705670 · Cited by 508
Research Progress on Negative Electrodes for Practical Li‐Ion Batteries: Beyond Carbonaceous Anodes
Aravindan, V., Lee, Y., & Madhavi, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402225 · Cited by 462
CuO/graphene composite as anode materials for lithium-ion batteries
Mai, Y. J., Wang, X. L., Xiang, J. Y., Qiao, Y. Q., Zhang, D., Gu, C. D., & Tu, J. P. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2010.11.036 · Cited by 404
Conversion reactions for sodium-ion batteries
Klein, F., Jache, B., Bhide, A., & Adelhelm, P. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52125g · Cited by 370
Li, H., Richter, G., & Maier, J. (2003) · Advanced Materials · doi:10.1002/adma.200304574 · Cited by 364
Carbon Coated ZnFe2O4 Nanoparticles for Advanced Lithium‐Ion Anodes
Bresser, D., Paillard, E., Kloepsch, R., Krueger, S., Fiedler, M., Schmitz, R., Baither, D., Winter, M., & Passerini, S. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200735 · Cited by 340
Beyond Insertion for Na‐Ion Batteries: Nanostructured Alloying and Conversion Anode Materials
Zhang, H., Hasa, I., & Passerini, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702582 · Cited by 316
Porous CuO nanowires as the anode of rechargeable Na-ion batteries
Wang, L., Zhang, K., Hu, Z., Duan, W., Cheng, F., & Chen, J. (2014) · Nano Research · doi:10.1007/s12274-013-0387-6 · Cited by 272
Lithium alloys and metal oxides as high-capacity anode materials for lithium-ion batteries
Liang, C., Gao, M., Pan, H., Liu, Y., & Yan, M. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.04.001 · Cited by 270
Banerjee, A., Singh, U., Aravindan, V., Srinivasan, M., & Ogale, S. (2013) · Nano Energy · doi:10.1016/j.nanoen.2013.04.008 · Cited by 270
Leveraging valuable synergies by combining alloying and conversion for lithium-ion anodes
Bresser, D., Passerini, S., & Scrosati, B. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02346k · Cited by 261
Metadata
- Authors
- Débart, A., Dupont, L., Poizot, P., Leriche, J.-B., & Tarascon, J. M.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2001
- Volume
- 148
- Issue
- 11
- Pages
- A1266
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2040024770
- Cited by
- 508
- References
- 8
- FWCI
- 8.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.