The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Analysis of Electrochemical and Thermal Behavior of Li-Ion Cells
Abstract
This paper seeks to gain a better understanding of the thermal behavior of Li-ion cells using a previously developed two-dimensional, first principles-based thermal-electrochemical modeling approach. The model incorporates the reversible, irreversible, and ohmic heats in the matrix and solution phases, and the temperature dependence of the various transport, kinetic, and mass-transfer parameters based on Arrhenius expressions. Experimental data on the entropic contribution for the manganese oxide spinal and carbon electrodes, recently published in the literature, are also incorporated into the model in order to gauge the importance of this term in the overall heat generation. Simulations were used to estimate the thermal and electrical energy and the active material utilization at various rates in order to understand the effect of temperature on the electrochemistry and vice versa. In addition, the methodology of using experimental data, instead of an electrochemical model, to determine the heat-generation rate is examined by considering the differences between the local and lumped thermal models, and the assumption of using heat generation rate determined at a particular thermal environment under other conditions. Model simulations are used to gain insight into the appropriateness of various approximations in developing comprehensive thermal models for Li-ion cells. © 2002 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569
Thermal-Electrochemical Modeling of Battery Systems
Gu, W. B., & Wang, C. Y. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393625 · Cited by 746
Self-citationThermal Analysis of Lithium‐Ion Batteries
Chen, Y., & Evans, J. W. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1837095 · Cited by 545
Micro‐Macroscopic Coupled Modeling of Batteries and Fuel Cells: I. Model Development
Wang, C. Y., Gu, W. B., & Liaw, B. Y. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838820 · Cited by 363
Self-citationHeat‐Generation Rate and General Energy Balance for Insertion Battery Systems
Rao, L., & Newman, J. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837884 · Cited by 333
Thermal Modeling of the Lithium/Polymer Battery: I . Discharge Behavior of a Single Cell
Pals, C. R., & Newman, J. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2049974 · Cited by 315
Electrochemical-Thermal Model of Lithium Polymer Batteries
Song, L., & Evans, J. W. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393490 · Cited by 252
Cited by
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Challenges and opportunities towards fast-charging battery materials
Liu, Y., Zhu, Y., & Cui, Y. (2019) · Nature Energy · doi:10.1038/s41560-019-0405-3 · Cited by 1,781
A review of conduction phenomena in Li-ion batteries
Park, M., Zhang, X., Chung, M., Less, G. B., & Sastry, A. M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.060 · Cited by 1,627
Jaguemont, J., Boulon, L., & Dubé, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.034 · Cited by 1,188
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
Yang, X.-G., Leng, Y., Zhang, G., Ge, S., & Wang, C.-Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.110 · Cited by 948
Self-citationReciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles
Smith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.038 · Cited by 763
Self-citationWang, T., Tseng, K. J., Zhao, J., & Wei, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.013 · Cited by 713
A review on battery thermal management in electric vehicle application
Xia, G., Cao, L., & Bi, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.046 · Cited by 641
Li-Ion Cell Operation at Low Temperatures
Ji, Y., Zhang, Y., & Wang, C.-Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.047304jes · Cited by 640
Self-citationChen, C.-H., Brosa Planella, F., O’Regan, K., Gastol, D., Widanage, W. D., & Kendrick, E. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9050 · Cited by 610
Single-Particle Model for a Lithium-Ion Cell: Thermal Behavior
Guo, M., Sikha, G., & White, R. E. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3521314 · Cited by 567
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
Heating strategies for Li-ion batteries operated from subzero temperatures
Ji, Y., & Wang, C. Y. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.147 · Cited by 485
Self-citationMulti-Domain Modeling of Lithium-Ion Batteries Encompassing Multi-Physics in Varied Length Scales
Kim, G.-H., Smith, K., Lee, K.-J., Santhanagopalan, S., & Pesaran, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3597614 · Cited by 431
Online internal short circuit detection for a large format lithium ion battery
Feng, X., Weng, C., Ouyang, M., & Sun, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.019 · Cited by 383
Thermal Model for a Li-Ion Cell
Kumaresan, K., Sikha, G., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2817888 · Cited by 382
Efficient Macro-Micro Scale Coupled Modeling of Batteries
Subramanian, V. R., Diwakar, V. D., & Tapriyal, D. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.2032427 · Cited by 381
Thermal modeling of cylindrical lithium ion battery during discharge cycle
Jeon, D. H., & Baek, S. M. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.04.013 · Cited by 352
An Overview on Thermal Safety Issues of Lithium-ion Batteries for Electric Vehicle Application
Zhang, J., Zhang, L., Sun, F., & Wang, Z. (2018) · IEEE Access · doi:10.1109/access.2018.2824838 · Cited by 344
Zhao, R., Zhang, S., Liu, J., & Gu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.001 · Cited by 343
Enabling fast charging – Battery thermal considerations
Keyser, M., Pesaran, A., Li, Q., Santhanagopalan, S., Smith, K., Wood, E., Ahmed, S., Bloom, I., Dufek, E., Shirk, M., et al. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.009 · Cited by 326
A comprehensive review on heat pipe based battery thermal management systems
Weragoda, D. M., Tian, G., Burkitbayev, A., Lo, K.-H., & Zhang, T. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120070 · Cited by 330
Fang, W., Kwon, O. J., & Wang, C.-Y. (2010) · International Journal of Energy Research · doi:10.1002/er.1652 · Cited by 314
Self-citationZhao, C., Cao, W., Dong, T., & Jiang, F. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.083 · Cited by 311
Modeling for the scale-up of a lithium-ion polymer battery
Kim, U. S., Shin, C. B., & Kim, C.-S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.019 · Cited by 308
Effect of electrode configuration on the thermal behavior of a lithium-polymer battery
Kim, U. S., Shin, C. B., & Kim, C.-S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.09.054 · Cited by 292
Fleckenstein, M., Bohlen, O., Roscher, M. A., & Bäker, B. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.043 · Cited by 290
Electrochemical–thermal analysis of 18650 Lithium Iron Phosphate cell
Saw, L. H., Ye, Y., & Tay, A. A. O. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.040 · Cited by 275
Batteries for Electric and Hybrid-Electric Vehicles
Cairns, E. J., & Albertus, P. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100942 · Cited by 263
Wang, T., Tseng, K. J., & Zhao, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.033 · Cited by 259
Cai, L., & White, R. E. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3049347 · Cited by 259
Lithium Ion Battery Models and Parameter Identification Techniques
Barcellona, S., & Piegari, L. (2017) · Energies · doi:10.3390/en10122007 · Cited by 149
Electrothermal Modeling of Lithium-Ion Batteries for Electric Vehicles
Yang, Z., Patil, D., & Fahimi, B. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2880138 · Cited by 67
Metadata
- Authors
- Srinivasan, V., & Wang, C. Y.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2002-12-03
- Volume
- 150
- Issue
- 1
- Pages
- A98-A106
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2170032828
- Cited by
- 435
- References
- 19
- FWCI
- 7.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.