The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
“Electrochemical Shock” of Intercalation Electrodes: A Fracture Mechanics Analysis
Open accessAbstract
Fracture of electrode particles due to diffusion-induced stress has been implicated as a possible mechanism for capacity fade and impedance growth in lithium-ion batteries. In brittle materials, including many lithium intercalation materials, knowledge of the stress profile is necessary but insufficient to predict fracture events. We derive a fracture mechanics failure criterion for individual electrode particles and demonstrate its utility with a model system, galvanostatic charging of . Fracture mechanics predicts a critical C-rate above which active particles fracture; this critical C-rate decreases with increasing particle size. We produce an electrochemical shock map, a graphical tool that shows regimes of failure depending on C-rate, particle size, and the material's inherent fracture toughness . Fracture dynamics are sensitive to the gradient of diffusion-induced stresses at the crack tip; as a consequence, small initial flaws grow unstably and are therefore potentially more damaging than larger initial flaws, which grow stably.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Timoshenko, S. P., & Goodier, J. N. (1934) · Virtual Defense Library (Ministerio de Defensa) · Cited by 13,717
Lawn, B. (1993) · Cambridge University Press eBooks · doi:10.1017/cbo9780511623127 · Cited by 4,759
Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage Material
Idota, Y., Kubota, T., Matsufuji, A., Maekawa, Y., & Miyasaka, T. (1997) · Science · doi:10.1126/science.276.5317.1395 · Cited by 2,578
An empirical stress-intensity factor equation for the surface crack
Newman, J. C., & Raju, I. S. (1981) · Engineering Fracture Mechanics · doi:10.1016/0013-7944(81)90116-8 · Cited by 1,899
Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408
Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics
HASSELMAN, D. P. H. (1969) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1969.tb15848.x · Cited by 1,101
Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles
Zhang, X., Shyy, W., & Marie Sastry, A. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2759840 · Cited by 893
Stress generation and fracture in lithium insertion materials
Christensen, J., & Newman, J. (2006) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-006-0095-1 · Cited by 727
A Mathematical Model of Stress Generation and Fracture in Lithium Manganese Oxide
Christensen, J., & Newman, J. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2185287 · Cited by 485
Cheng, Y.-T., & Verbrugge, M. W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.01.021 · Cited by 469
Carbon-Metal Fluoride Nanocomposites
Badway, F., Pereira, N., Cosandey, F., & Amatucci, G. G. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1596162 · Cited by 428
Microstructural Modeling and Design of Rechargeable Lithium-Ion Batteries
Garcı́a, R. E., Chiang, Y.-M., Craig Carter, W., Limthongkul, P., & Bishop, C. M. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1836132 · Cited by 341
Self-citationIntercalation-Induced Stress and Heat Generation within Single Lithium-Ion Battery Cathode Particles
Zhang, X., Sastry, A. M., & Shyy, W. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2926617 · Cited by 334
The influence of surface mechanics on diffusion induced stresses within spherical nanoparticles
Cheng, Y.-T., & Verbrugge, M. W. (2008) · Journal of Applied Physics · doi:10.1063/1.3000442 · Cited by 302
Huggins, R. A., & Nix, W. D. (2000) · Ionics · doi:10.1007/bf02375547 · Cited by 282
Theoretical Analysis of Stresses in a Lithium Ion Cell
Renganathan, S., Sikha, G., Santhanagopalan, S., & White, R. E. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3261809 · Cited by 237
Modeling Diffusion-Induced Stress in Li-Ion Cells with Porous Electrodes
Christensen, J. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3269995 · Cited by 233
Modeling Lithium Intercalation of a Single Spinel Particle under Potentiodynamic Control
Zhang, D., Popov, B. N., & White, R. E. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393279 · Cited by 230
Cheng, Y.-T., & Verbrugge, M. W. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3298892 · Cited by 220
Pressure derivatives of elastic constants of single crystal MgO and MgAl2O4.
Yoneda, A. (1990) · Journal of Physics of the Earth · doi:10.4294/jpe1952.38.19 · Cited by 215
Bhandakkar, T. K., & Gao, H. (2010) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2010.02.001 · Cited by 202
Averting cracks caused by insertion reaction in lithium–ion batteries
Hu, Y., Zhao, X., & Suo, Z. (2010) · Journal of Materials Research · doi:10.1557/jmr.2010.0142 · Cited by 182
TEM Study of Fracturing in Spherical and Plate-like LiFePO[sub 4] Particles
Gabrisch, H., Wilcox, J. D., & Doeff, M. M. (2008) · Electrochemical and Solid-State Letters · doi:10.1149/1.2826746 · Cited by 153
Thermal-shock crack patterns explained by single and multiple crack propagation
Bahr, H. ‐., Fischer, G., & Weiß, H.-J. (1986) · Journal of Materials Science · doi:10.1007/bf00551478 · Cited by 152
Numerical modeling of electrochemical–mechanical interactions in lithium polymer batteries
Golmon, S., Maute, K. K., & Dunn, M. L. (2009) · Computers & Structures · doi:10.1016/j.compstruc.2009.08.005 · Cited by 143
Monitoring of Particle Fracture by Acoustic Emission during Charge and Discharge of Li / MnO2 Cells
Ohzuku, T., Tomura, H., & Sawai, K. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1838039 · Cited by 112
Cited by
McDowell, M. T., Lee, S. W., Nix, W. D., & Cui, Y. (2013) · Advanced Materials · doi:10.1002/adma.201301795 · Cited by 1,670
Lithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
Interconnected Silicon Hollow Nanospheres for Lithium-Ion Battery Anodes with Long Cycle Life
Yao, Y., McDowell, M. T., Ryu, I., Wu, H., Liu, N., Hu, L., Nix, W. D., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl201470j · Cited by 1,456
Yan, P., Zheng, J., Gu, M., Xiao, J., Zhang, J.-G., & Wang, C.-M. (2017) · Nature Communications · doi:10.1038/ncomms14101 · Cited by 1,010
Yang, X.-G., Leng, Y., Zhang, G., Ge, S., & Wang, C.-Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.110 · Cited by 948
Metadata
- Authors
- Woodford, W. H., Chiang, Y.-M., & Carter, W. C.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2010
- Volume
- 157
- Issue
- 10
- Pages
- A1052
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1988518692
- Cited by
- 323
- References
- 26
- FWCI
- 13.21
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.