The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Influence of NCM Particle Cracking on Kinetics of Lithium-Ion Batteries with Liquid or Solid Electrolyte
Open accessAbstract
In liquid electrolyte-type lithium-ion batteries, Nickel-rich NCM (Li 1+x (Ni 1−y−z Co y Mn z)1−x O 2) as cathode active material allows for high discharge capacities and good material utilization, while solid-state batteries perform worse despite the past efforts in improving solid electrolyte conductivity and stability. In this work, we identify major reasons for this discrepancy by investigating the lithium transport kinetics in NCM-811 as typical Ni-rich material. During the first charge of battery half-cells, cracks form and are filled by the liquid electrolyte distributing inside the secondary particles of NCM. This drastically improves both the lithium chemical diffusion and charge transfer kinetics by increasing the electrochemically active surface area and reducing the effective particle size. Solid-state batteries are not affected by these cracks because of the mechanical rigidity of solid electrolytes. Hence, secondary particle cracking improves the initial charge and discharge kinetics of NCM in liquid electrolytes, while it degrades the corresponding kinetics in solid electrolytes. Accounting for these kinetic limitations by combining galvanostatic and potentiostatic discharge, we show that Coulombic efficiencies of about 89% at discharge capacities of about 173 mAh g NCM −1 can be reached in solid-state battery half-cells with LiNi 0.8 Co 0.1 Mn 0.1 O 2 as cathode active material and Li 6 PS 5 Cl as solid electrolyte.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citationHigh-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Weppner, W., & Huggins, R. A. (1977) · Journal of The Electrochemical Society · doi:10.1149/1.2133112 · Cited by 1,980
Ryu, H.-H., Park, K.-J., Yoon, C. S., & Sun, Y.-K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b05269 · Cited by 1,629
Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
Application of A‐C Techniques to the Study of Lithium Diffusion in Tungsten Trioxide Thin Films
Ho, C., Raistrick, I. D., & Huggins, R. A. (1980) · Journal of The Electrochemical Society · doi:10.1149/1.2129668 · Cited by 1,241
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
Self-citationThermodynamic and Mass Transport Properties of “ LiAl ”
Wen, C. J., Boukamp, B. A., Huggins, R. A., & Weppner, W. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128939 · Cited by 888
Koerver, R., Zhang, W., de Biasi, L., Schweidler, S., Kondrakov, A. O., Kolling, S., Brezesinski, T., Hartmann, P., Zeier, W. G., & Janek, J. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00907d · Cited by 872
Self-citationKondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
Self-citationRadin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
Levi, M. D., Salitra, G., Markovsky, B., Teller, H., Aurbach, D., Heider, U., & Heider, L. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391759 · Cited by 644
Auvergniot, J., Cassel, A., Ledeuil, J.-B., Viallet, V., Seznec, V., & Dedryvère, R. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04990 · Cited by 644
Analysis of the chemical diffusion coefficient of lithium ions in Li3V2(PO4)3 cathode material
Rui, X. H., Ding, N., Liu, J., Li, C., & Chen, C. H. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2009.11.096 · Cited by 641
Levi, M. D., & Aurbach, D. (1997) · The Journal of Physical Chemistry B · doi:10.1021/jp9701909 · Cited by 558
Zhang, W., Weber, D. A., Weigand, H., Arlt, T., Manke, I., Schröder, D., Koerver, R., Leichtweiss, T., Hartmann, P., Zeier, W. G., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01137 · Cited by 538
Self-citationWatanabe, S., Kinoshita, M., Hosokawa, T., Morigaki, K., & Nakura, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.018 · Cited by 465
Harlow, J. E., Ma, X., Li, J., Logan, E., Liu, Y., Zhang, N., Ma, L., Glazier, S. L., Cormier, M. M. E., Genovese, M., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0981913jes · Cited by 445
Galvanostatic Intermittent Titration Technique for Phase-Transformation Electrodes
Zhu, Y., & Wang, C. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp9113333 · Cited by 421
Märker, K., Reeves, P. J., Xu, C., Griffith, K. J., & Grey, C. P. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00140 · Cited by 417
Kinetics Tuning of Li-Ion Diffusion in Layered Li(NixMnyCoz)O2
Wei, Y., Zheng, J., Cui, S., Song, X., Su, Y., Deng, W., Wu, Z., Wang, X., Wang, W., Rao, M., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04040 · Cited by 395
The Detrimental Effects of Carbon Additives in Li10GeP2S12-Based Solid-State Batteries
Zhang, W., Leichtweiß, T., Culver, S. P., Koerver, R., Das, D., Weber, D. A., Zeier, W. G., & Janek, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11530 · Cited by 392
Self-citationInterfacial modification for high-power solid-state lithium batteries
Takada, K., Ohta, N., Zhang, L., Fukuda, K., Sakaguchi, I., Ma, R., Osada, M., & Sasaki, T. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.02.017 · Cited by 376
de Biasi, L., Kondrakov, A. O., Geßwein, H., Brezesinski, T., Hartmann, P., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06363 · Cited by 374
Self-citationZhou, X., Huang, J., Pan, Z., & Ouyang, M. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.04.040 · Cited by 355
Santhosha, A. L., Medenbach, L., Buchheim, J. R., & Adelhelm, P. (2019) · Batteries & Supercaps · doi:10.1002/batt.201800149 · Cited by 346
Culver, S. P., Koerver, R., Zeier, W. G., & Janek, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900626 · Cited by 342
Self-citationImpact of Cathode Material Particle Size on the Capacity of Bulk-Type All-Solid-State Batteries
Strauss, F., Bartsch, T., de Biasi, L., Kim, A.-Y., Janek, J., Hartmann, P., & Brezesinski, T. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00275 · Cited by 334
Self-citationZhang, W., Richter, F. H., Culver, S. P., Leichtweiss, T., Lozano, J. G., Dietrich, C., Bruce, P. G., Zeier, W. G., & Janek, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05132 · Cited by 334
Self-citationTsai, P.-C., Wen, B., Wolfman, M., Choe, M.-J., Pan, M. S., Su, L., Thornton, K., Cabana, J., & Chiang, Y.-M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00001h · Cited by 325
Shen, Z. J., Cao, L., Rahn, C. D., et al. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.084310jes · Cited by 323
Lithium diffusion mechanisms in layered intercalation compounds
Van der Ven, A., & Ceder, G. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00638-3 · Cited by 312
Intrinsic Origins of Crack Generation in Ni-rich LiNi0.8Co0.1Mn0.1O2 Layered Oxide Cathode Material
Lim, J.-M., Hwang, T., Kim, D., Park, M.-S., Cho, K., & Cho, M. (2017) · Scientific Reports · doi:10.1038/srep39669 · Cited by 305
An Unavoidable Challenge for Ni-Rich Positive Electrode Materials for Lithium-Ion Batteries
Li, H., Liu, A., Zhang, N., Wang, Y., Yin, S., Wu, H., & Dahn, J. R. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b02372 · Cited by 304
Microstructural Modeling of Composite Cathodes for All-Solid-State Batteries
Bielefeld, A., Weber, D. A., & Janek, J. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b11043 · Cited by 278
Self-citationKim, A.-Y., Strauss, F., Bartsch, T., Teo, J. H., Hatsukade, T., Mazilkin, A., Janek, J., Hartmann, P., & Brezesinski, T. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b02947 · Cited by 266
Self-citationCui, S., Wei, Y., Liu, T., Deng, W., Hu, Z., Su, Y., Li, H., Li, M., Guo, H., Duan, Y., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501309 · Cited by 259
Jung, S. H., Kim, U., Kim, J., Jun, S., Yoon, C. S., Jung, Y. S., & Sun, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201903360 · Cited by 259
DOYLE, M., & NEWMAN, J. (1997) · Journal of Applied Electrochemistry · doi:10.1023/a:1018481030499 · Cited by 239
Dewald, G. F., Ohno, S., Kraft, M. A., Koerver, R., Till, P., Vargas-Barbosa, N. M., Janek, J., & Zeier, W. G. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01550 · Cited by 236
Self-citationAll-Solid-State Batteries with Thick Electrode Configurations
Kato, Y., Shiotani, S., Morita, K., Suzuki, K., Hirayama, M., & Kanno, R. (2018) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b02880 · Cited by 234
Electro–Chemo–Mechanical Issues at the Interfaces in Solid‐State Lithium Metal Batteries
Wang, P., Qu, W., Song, W., Chen, H., Chen, R., & Fang, D. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900950 · Cited by 223
Friedrich, F., Strehle, B., Freiberg, A. T. S., Kleiner, K., Day, S. J., Erk, C., Piana, M., & Gasteiger, H. A. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0821915jes · Cited by 217
Lee, H., Oh, P., Kim, J., Cha, H., Chae, S., Lee, S., & Cho, J. (2019) · Advanced Materials · doi:10.1002/adma.201900376 · Cited by 182
Landesfeind, J., Pritzl, D., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0131709jes · Cited by 176
Storage characteristics of cathodes for Li-ion batteries
Pistoia, G., Antonini, A., Rosati, R., & Zane, D. (1996) · Electrochimica Acta · doi:10.1016/0013-4686(96)00122-3 · Cited by 156
Fracture behavior in battery materials
Li, P., Zhao, Y., Shen, Y., & Bo, S. (2020) · Journal of Physics Energy · doi:10.1088/2515-7655/ab83e1 · Cited by 98
Yoshinari, T., Koerver, R., Hofmann, P., Uchimoto, Y., Zeier, W. G., & Janek, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b05995 · Cited by 92
Self-citationLiu, T., Zhang, Y., Chen, R., Zhao, S., Lin, Y., Nan, C., & Shen, Y. (2017) · Electrochemistry Communications · doi:10.1016/j.elecom.2017.03.016 · Cited by 76
Kasnatscheew, J., Evertz, M., Streipert, B., Wagner, R., Nowak, S., Cekić-Lasković, I., & Winter, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.092 · Cited by 76
Mendoza, I. O. S., Vázquez-Arenas, J. G., González, I., Ramos‐Sánchez, G., & Castillo-Araiza, C. O. (2018) · International Journal of Chemical Reactor Engineering · doi:10.1515/ijcre-2018-0095 · Cited by 28
Pang, M.-C., Hao, Y., Marinescu, M., Wang, H., Chen, M., & Offer, G. J. (2019) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp03886h · Cited by 22
Cited by
Fast Charging of Lithium‐Ion Batteries: A Review of Materials Aspects
Weiss, M., Ruess, R., Kasnatscheew, J., Levartovsky, Y., Levy, N. R., Minnmann, P., Stolz, L., Waldmann, T., Wohlfahrt‐Mehrens, M., Aurbach, D., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101126 · Cited by 1,055
Self-citationQuilty, C. D., Wu, D., Li, W., Bock, D. C., Wang, L., Housel, L. M., Abraham, A., Takeuchi, K. J., Marschilok, A. C., & Takeuchi, E. S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00214 · Cited by 388
Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation
Zhang, H., Liu, H., Piper, L. F. J., Whittingham, M. S., & Zhou, G. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00327 · Cited by 338
Mechanical properties of cathode materials for lithium-ion batteries
Stallard, J. C., Wheatcroft, L., Booth, S. G., Boston, R., Corr, S. A., De Volder, M. F. L., Inkson, B. J., & Fleck, N. A. (2022) · Joule · doi:10.1016/j.joule.2022.04.001 · Cited by 336
Designing Cathodes and Cathode Active Materials for Solid‐State Batteries
Minnmann, P., Strauss, F., Bielefeld, A., Ruess, R., Adelhelm, P., Burkhardt, S., Dreyer, S. L., Trevisanello, E., Ehrenberg, H., Brezesinski, T., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201425 · Cited by 277
Self-citation
Metadata
- Authors
- Ruess, R., Schweidler, S., Hemmelmann, H., Conforto, G., Bielefeld, A., Weber, D. A., Sann, J., Elm, M. T., & Janek, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2020-01-06
- Volume
- 167
- Issue
- 10
- Pages
- 100532
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W3035180715
- Cited by
- 271
- References
- 57
- FWCI
- 11.06
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.