The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Atomic Layer Etching at the Tipping Point: An Overview
Open accessAbstract
The ability to achieve near-atomic precision in etching different materials when transferring lithographically defined templates is a requirement of increasing importance for nanoscale structure fabrication in the semiconductor and related industries. The use of ultra-thin gate dielectrics, ultra thin channels, and sub-20 nm film thicknesses in field effect transistors and other devices requires near-atomic scale etching control and selectivity. There is an emerging consensus that as critical dimensions approach the sub-10 nm scale, the need for an etching method corresponding to Atomic Layer Deposition (ALD), i.e. Atomic Layer Etching (ALE), has become essential, and that the more than 30-year quest to complement/replace continuous directional plasma etching (PE) methods for critical applications by a sequence of individual, self-limited surface reaction steps has reached a crucial stage. A key advantage of this approach relative to continuous PE is that it enables optimization of the individual steps with regard to reactant adsorption, self-limited etching, selectivity relative to other materials, and damage of critical surface layers. In this overview we present basic approaches to ALE of materials, discuss similarities/crucial differences relative to thermal and plasma-enhanced ALD, and then review selected results on ALE of materials aimed at pattern transfer. The overview concludes with a discussion of opportunities and challenges ahead.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
Greenwood, N. N., & Earnshaw, A. (1984) · Cited by 5,489
Schwierz, F. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.89 · Cited by 5,267
Narrow graphene nanoribbons from carbon nanotubes
Jiao, L., Zhang, L., Wang, X., Diankov, G., & Dai, H. (2009) · Nature · doi:10.1038/nature07919 · Cited by 2,441
Two-dimensional flexible nanoelectronics
Akinwande, D., Petrone, N., & Hone, J. (2014) · Nature Communications · doi:10.1038/ncomms6678 · Cited by 1,910
Low-Temperature Al2O3 Atomic Layer Deposition
Groner, M. D., Fabreguette, F. H., Elam, J. W., & George, S. M. (2004) · Chemistry of Materials · doi:10.1021/cm0304546 · Cited by 1,403
Atomic layer deposition (ALD): from precursors to thin film structures
Leskelä, M., & Ritala, M. (2002) · Thin Solid Films · doi:10.1016/s0040-6090(02)00117-7 · Cited by 1,314
Atomic Layer Deposition Chemistry: Recent Developments and Future Challenges
Leskelä, M., & Ritala, M. (2003) · Angewandte Chemie International Edition · doi:10.1002/anie.200301652 · Cited by 1,109
Plasma-Assisted Atomic Layer Deposition: Basics, Opportunities, and Challenges
Profijt, H. B., Potts, S. E., van de Sanden, M. C. M., & Kessels, W. M. M. (2011) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.3609974 · Cited by 907
Plasma etching: Yesterday, today, and tomorrow
Donnelly, V. M., & Kornblit, A. (2013) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.4819316 · Cited by 880
Energy dependence of the ion-induced sputtering yields of monatomic solids
Matsunami, N., Yamamura, Y., Itikawa, Y., Itoh, N., Kazumata, Y., Miyagawa, S., Morita, K., Shimizu, R., & Tawara, H. (1984) · Atomic Data and Nuclear Data Tables · doi:10.1016/0092-640x(84)90016-0 · Cited by 805
ENERGY DEPENDENCE OF ION-INDUCED SPUTTERING YIELDS FROM MONATOMIC SOLIDS AT NORMAL INCIDENCE
YAMAMURA, Y., & TAWARA, H. (1996) · Atomic Data and Nuclear Data Tables · doi:10.1006/adnd.1996.0005 · Cited by 771
Groner, M. D., Elam, J. W., Fabreguette, F. H., & George, S. M. (2002) · Thin Solid Films · doi:10.1016/s0040-6090(02)00438-8 · Cited by 758
Surface Chemistry for Atomic Layer Growth
George, S. M., Ott, A. W., & Klaus, J. W. (1996) · The Journal of Physical Chemistry · doi:10.1021/jp9536763 · Cited by 680
Samukawa, S., Hori, M., Rauf, S., Tachibana, K., Bruggeman, P., Kroesen, G., Whitehead, J. C., Murphy, A. B., Gutsol, A. F., Starikovskaia, S., et al. (2012) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/45/25/253001 · Cited by 657
Al3O3 thin film growth on Si(100) using binary reaction sequence chemistry
Ott, A. W., Klaus, J. W., Johnson, J. M., & George, S. M. (1997) · Thin Solid Films · doi:10.1016/s0040-6090(96)08934-1 · Cited by 517
Surface science aspects of etching reactions
Winters, H. F., & Coburn, J. W. (1992) · Surface Science Reports · doi:10.1016/0167-5729(92)90009-z · Cited by 502
Hybrid modelling of low temperature plasmas for fundamental investigations and equipment design
Kushner, M. J. (2009) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/42/19/194013 · Cited by 396
Two-dimensional modeling of high plasma density inductively coupled sources for materials processing
Ventzek, P. L. G., Hoekstra, R. J., & Kushner, M. J. (1994) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.587101 · Cited by 342
Schaepkens, M., Standaert, T. E. F. M., Rueger, N. R., Sebel, P. G. M., Oehrlein, G. S., & Cook, J. M. (1999) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.582108 · Cited by 319
Self-citationStandaert, T. E. F. M., Hedlund, C., Joseph, E. A., Oehrlein, G. S., & Dalton, T. J. (2003) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.1626642 · Cited by 309
Self-citationBangsaruntip, S., Cohen, G. M., Majumdar, A., Zhang, Y., Engelmann, S. U., Fuller, N. C. M., Gignac, L. M., Mittal, S., Newbury, J. S., Guillorn, M., et al. (2009) · 2009 IEEE International Electron Devices Meeting (IEDM) · doi:10.1109/iedm.2009.5424364 · Cited by 297
Standaert, T. E. F. M., Schaepkens, M., Rueger, N. R., Sebel, P. G. M., Oehrlein, G. S., & Cook, J. M. (1998) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.580978 · Cited by 271
Self-citationRueger, N. R., Beulens, J., Schaepkens, M., Doemling, M. F., Mirza, J. M., Standaert, T. E. F. M., & Oehrlein, G. S. (1997) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.580655 · Cited by 261
Self-citation2005 IEEE International Electron Devices Meeting
(2005) · Journal of Lightwave Technology · doi:10.1109/jlt.2005.853686 · Cited by 258
Pulsed plasma etching for semiconductor manufacturing
Economou, D. J. (2014) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/47/30/303001 · Cited by 226
Pulsed high-density plasmas for advanced dry etching processes
Banna, S., Agarwal, A., Cunge, G., Darnon, M., Pargon, E., & Joubert, O. (2012) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.4716176 · Cited by 206
Oehrlein, G. S., Phaneuf, R. J., & Graves, D. B. (2011) · Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena · doi:10.1116/1.3532949 · Cited by 203
Self-citationAerobic exercise training reduces epicardial fat in obese men
Kim, M.-K., Tomita, T., Kim, M.-J., Sasai, H., Maeda, S., & Tanaka, K. (2009) · Journal of Applied Physiology · doi:10.1152/japplphysiol.90756.2008 · Cited by 185
The grand challenges of plasma etching: a manufacturing perspective
Lee, C. G. N., Kanarik, K. J., & Gottscho, R. A. (2014) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/47/27/273001 · Cited by 182
Control of ion energy distribution at substrates during plasma processing
Wang, S.-B., & Wendt, A. E. (2000) · Journal of Applied Physics · doi:10.1063/1.373715 · Cited by 175
Silicon etching mechanisms in a CF4/H2 glow discharge
Oehrlein, G. S., & Williams, H. L. (1987) · Journal of Applied Physics · doi:10.1063/1.339766 · Cited by 160
Self-citationEnergy-enhanced atomic layer deposition for more process and precursor versatility
Potts, S. E., & Kessels, W. M. M. (2013) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2013.06.015 · Cited by 106
Sidewall surface chemistry in directional etching processes
Oehrlein, G. S., & Kurogi, Y. (1998) · Materials Science and Engineering R Reports · doi:10.1016/s0927-796x(98)00016-3 · Cited by 100
Self-citationKubota, N. A., Economou, D. J., & Plimpton, S. J. (1998) · Journal of Applied Physics · doi:10.1063/1.367225 · Cited by 86
Possémé, N., Pollet, O., & Barnola, S. (2014) · Applied Physics Letters · doi:10.1063/1.4892543 · Cited by 69
Critical review: Plasma-surface reactions and the spinning wall method
Donnelly, V. M., Guha, J., & Stafford, L. (2011) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.3517478 · Cited by 49
Min, K. S., Kang, C. Y., Park, C., Park, C. S., Park, B. J., Park, J. H., Hussain, M. M., Lee, J. C., Lee, B. H., Kirsch, P. D., et al. (2009) · Technical digest - International Electron Devices Meeting/Technical digest · doi:10.1109/iedm.2009.5424330 · Cited by 12
Ion energy control at substrates during plasma etching of patterned structures
Silapunt, R., Wendt, A. E., & Kirmse, K. H. R. (2007) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.2803723 · Cited by 11
Cited by
The 2017 Plasma Roadmap: Low temperature plasma science and technology
Adamovich, I., Baalrud, S. D., Bogaerts, A., Bruggeman, P. J., Cappelli, M., Colombo, V, Czarnetzki, U., Ebert, U., Eden, J. G., Favia, P., et al. (2017) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/aa76f5 · Cited by 967
Self-citationThe 2022 Plasma Roadmap: low temperature plasma science and technology
Adamovich, I., Agarwal, S., Ahedo, E., Alves, L. L., Baalrud, S., Babaeva, N., Bogaerts, A., Bourdon, A., Bruggeman, P. J., Canal, C., et al. (2022) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/ac5e1c · Cited by 536
Self-citation
Metadata
- Authors
- Oehrlein, G. S., Metzler, D., & Li, C.
- Venue
- ECS Journal of Solid State Science and Technology
- Publisher
- The Electrochemical Society
- Published
- 2015
- Volume
- 4
- Issue
- 6
- Pages
- N5041-N5053
- ISSN
- 2162-8769 (ISSN-L)
- 2162-8777
- OpenAlex
- W1876337511
- Cited by
- 295
- References
- 39
- FWCI
- 9.94
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.