The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Requirements for Safe Robots: Measurements, Analysis and New Insights
Open accessAbstract
Physical human—robot interaction and cooperation has become a topic of increasing importance and of major focus in robotics research. An essential requirement of a robot designed for high mobility and direct interaction with human users or uncertain environments is that it must in no case pose a threat to the human. Until recently, quite a few attempts were made to investigate real-world threats via collision tests and use the outcome to considerably improve safety during physical human—robot interaction. In this paper, we give an overview of our systematic evaluation of safety in human—robot interaction, covering various aspects of the most significant injury mechanisms. In order to quantify the potential injury risk emanating from such a manipulator, impact tests with the DLR-Lightweight Robot III were carried out using standard automobile crash test facilities at the German Automobile Club (ADAC). Based on these tests, several industrial robots of different weight have been evaluated and the influence of the robot mass and velocity have been investigated. The evaluated non-constrained impacts would only partially capture the nature of human—robot safety. A possibly constrained environment and its effect on the resulting human injuries are discussed and evaluated from different perspectives. As well as such impact tests and simulations, we have analyzed the problem of the quasi-static constrained impact, which could pose a serious threat to the human even for low-inertia robots under certain circumstances. Finally, possible injuries relevant in robotics are summarized and systematically classified.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Croat, T. B., & Kinslow, P. (2007) · Cited by 1,111
Albu-Schäffer, A., Ott, C., & Hirzinger, G. (2007) · The International Journal of Robotics Research · doi:10.1177/0278364907073776 · Cited by 815
Self-citationCollision Detection and Safe Reaction with the DLR-III Lightweight Manipulator Arm
De Luca, A., Albu-Schaffer, A., Haddadin, S., & Hirzinger, G. (2006) · 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems · doi:10.1109/iros.2006.282053 · Cited by 779
Self-citationBicchi, A., & Tonietti, G. (2004) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2004.1310939 · Cited by 654
The DLR lightweight robot: design and control concepts for robots in human environments
Albu‐Schäffer, A., Haddadin, S., Ott, C., Stemmer, A., Wimböck, T., & Hirzinger, G. (2007) · Industrial Robot: An International Journal · doi:10.1108/01439910710774386 · Cited by 623
Self-citationA Review of the Severity Index
Versace, J. (1971) · SAE Technical Paper Series · doi:10.4271/710881 · Cited by 587
Collision Detection and Reaction: A Contribution to Safe Physical Human-Robot Interaction
Haddadin, S., Albu-Schaffer, A., De Luca, A., & Hirzinger, G. (2008) · 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems · doi:10.1109/iros.2008.4650764 · Cited by 562
Self-citationA New Actuation Approach for Human Friendly Robot Design
Zinn, M., Roth, B., Khatib, O., & Salisbury, J. K. (2004) · The International Journal of Robotics Research · doi:10.1177/0278364904042193 · Cited by 441
Safety Evaluation Method of Design and Control for Human-Care Robots
Ikuta, K., Ishii, H., & Nokata, M. (2003) · The International Journal of Robotics Research · doi:10.1177/027836403128965079 · Cited by 239
Quantitative Safety Guarantees for Physical Human-Robot Interaction
Heinzmann, J., & Zelinsky, A. (2003) · The International Journal of Robotics Research · doi:10.1177/027836403128965231 · Cited by 234
Safety Evaluation of Physical Human-Robot Interaction via Crash-Testing
Haddadin, S., Albu-Schaeffer, A., & Hirzinger, G. (2007) · Robotics: Science and Systems III · doi:10.15607/rss.2007.iii.028 · Cited by 231
Self-citation2023 IEEE International Conference on Robotics and Automation (ICRA)
(2023) · doi:10.1109/icra48891.2023 · Cited by 205
Pre-collision safety strategies for human-robot interaction
Kulić, D., & Croft, E. (2007) · Autonomous Robots · doi:10.1007/s10514-006-9009-4 · Cited by 200
Haddadin, S., Albu-Schaffer, A., & Hirzinger, G. (2008) · 2008 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.2008.4543388 · Cited by 184
Self-citationFacial Impact Response — A Comparison of the Hybrid III Dummy and Human Cadaver
Allsop, D. “., Warner, C. Y., Wille, M. G., Schneider, D. C., & Nahum, A. M. (1988) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/881719 · Cited by 134
Lim, H., & Tanie, K. (2000) · The International Journal of Robotics Research · doi:10.1177/02783640022066888 · Cited by 77
Physical human-robot interaction: Dependability, safety, and performance
Bicchi, A., Bavaro, M., Boccadamo, G., Carli, D. D., Filippini, R., Grioli, G., Piccigallo, M., Rosi, A., Schiavi, R., Sen, S., et al. (2008) · IEEE International Workshop on Advanced Motion Control (AMC) · doi:10.1109/amc.2008.4516033 · Cited by 73
Robot-Dummy Crash Tests for Robot Safety Assessment
Oberer-Treitz, S., & Schraft, R. D. (2007) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/robot.2007.363917 · Cited by 71
Cited by
Reach and grasp by people with tetraplegia using a neurally controlled robotic arm
Hochberg, L. R., Bacher, D., Jarosiewicz, B., Masse, N. Y., Simeral, J. D., Vogel, J., Haddadin, S., Liu, J., Cash, S. S., van der Smagt, P., et al. (2012) · Nature · doi:10.1038/nature11076 · Cited by 2,719
Self-citationProgress and prospects of the human–robot collaboration
Ajoudani, A., Zanchettin, A. M., Ivaldi, S., Albu-Schäffer, A., Kosuge, K., & Khatib, O. (2018) · Autonomous Robots · doi:10.1007/s10514-017-9677-2 · Cited by 832
Self-citationWorking Together: A Review on Safe Human-Robot Collaboration in Industrial Environments
Robla-Gomez, S., Becerra, V. M., Llata, J. R., Gonzalez-Sarabia, E., Torre-Ferrero, C., & Perez-Oria, J. (2017) · IEEE Access · doi:10.1109/access.2017.2773127 · Cited by 589
“in [23], [36], and [38].”
Collaborative manufacturing with physical human–robot interaction
Cherubini, A., Passama, R., Crosnier, A., Lasnier, A., & Fraisse, P. (2016) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.12.007 · Cited by 589
Symbiotic human-robot collaborative assembly
Wang, L., Gao, R., Váncza, J., Krüger, J., Wang, X. V., Makris, S., & Chryssolouris, G. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.05.002 · Cited by 565
Metadata
- Authors
- Haddadin, S., Albu-Schäffer, A., & Hirzinger, G.
- Venue
- The International Journal of Robotics Research
- Publisher
- SAGE Publications
- Published
- 2009-08-20
- Volume
- 28
- Issue
- 11-12
- Pages
- 1507-1527
- ISSN
- 0278-3649 (ISSN-L)
- 1741-3176
- OpenAlex
- W2116139612
- Cited by
- 444
- References
- 19
- FWCI
- 35.11
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.