CoChat

Laboratory Protocol and Pilot Results for Dynamic Interference Testing of Continuous Glucose Monitoring Sensors

Open access

The DOI matches its Crossref record, with a small difference in title or year; 16 of the 16 references it cites were found in a registry or an index.

Abstract

Background: Testing the potential influence of interfering substances on the measurement performance of needle sensors for continuous glucose monitoring (CGM) is a challenging task. For proper function, the sensors need an almost stable fluidic environment. Previously published in vitro interference experiments were measuring under static concentration conditons. Our experimental setup allows for interference testing with dynamic changes of the interferent concentrations. Methods: We designed a macrofluidic test stand that is fueled by several high-pressure liquid chromatography (HPLC) pumps generating programmable glucose and/or interferent gradients in phosphate-buffered saline (PBS). After optimizing experimental parameters (channel dimensions, temperature, flow rates, gradient slopes, buffer, pH etc.), we validated the setup using Dexcom G6 (G6) and Freestyle Libre 2 (L2) sensors with/without interferents, and using YSI 2300 Stat plus as the reference glucose device at room temperature. Results: Both sensors tracked the programmed glucose changes. After calibration, G6 results closely matched glucose reference readings, while L2 routinely showed ~50% to 60% lower readings, most likely because of the factory-based calibration and temperature compensation. Gradients of maltose, acetaminophen, and xylose were employed to further validate the setup. As expected, both sensors were not affected by maltose. We confirmed previous findings regarding susceptibility of G6 readings to acetaminophen and L2 readings to xylose. Signals from both sensors are influenced by temperature in a linear fashion. Conclusions: Our experimental in vitro setup and protocol may provide a useful method to dynamically test CGM sensors for interfering substances. This may help to improve the accuracy of future CGM sensor generations.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1177/19322968221095573

Cites

16 of 16 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1. Sketch of the design of the laboratory test stand for dynamic interference testing of continuous glucose monitoring needle sensors.
Figure 1. Sketch of the design of the laboratory test stand for dynamic interference testing of continuous glucose monitoring needle sensors.CC BY-NC · PubMed Central
Figure 2. Glucose gradient experiment (YSI: Yellow Springs Instruments Stat 2300 plus, glucose reference method, n = 3 for each sensor type).
Figure 2. Glucose gradient experiment (YSI: Yellow Springs Instruments Stat 2300 plus, glucose reference method, n = 3 for each sensor type).CC BY-NC · PubMed Central
Figure 3. Sensor response to a maltose gradient (0-480 mg/dL) at stable glucose concentrations of 200 mg/dL at room temperature. The Dexcom G6 sensor was calibrated to the baseline glucose level prior to the experiment, while the factory calibrated Libre 2 sensor does not provide this option and displayed 50% to 60% lower results (BOB = bias over baseline, n = 3 for each sensor type).
Figure 3. Sensor response to a maltose gradient (0-480 mg/dL) at stable glucose concentrations of 200 mg/dL at room temperature. The Dexcom G6 sensor was calibrated to the baseline glucose level prior to the experiment, while the factory calibrated Libre 2 sensor does not provide this option and displayed 50% to 60% lower results (BOB = bias over baseline, n = 3 for each sensor type).CC BY-NC · PubMed Central
Figure 4. Sensor response to a xylose gradient (0-600 mg/dL) at stable glucose concentrations of 200 mg/dL at room temperature. The Dexcom G6 sensor was calibrated to the baseline glucose level prior to the experiment, while the factory calibrated Libre 2 sensor does not provide this option and displayed 50% to 60 % lower results (BOB = bias over baseline, n = 3 for each sensor type).
Figure 4. Sensor response to a xylose gradient (0-600 mg/dL) at stable glucose concentrations of 200 mg/dL at room temperature. The Dexcom G6 sensor was calibrated to the baseline glucose level prior to the experiment, while the factory calibrated Libre 2 sensor does not provide this option and displayed 50% to 60 % lower results (BOB = bias over baseline, n = 3 for each sensor type).CC BY-NC · PubMed Central
Figure 5. Sensor response to an acetaminophen gradient (0-20 mg/dL) at stable glucose concentrations of 200 mg/dL at room temperature. The Dexcom G6 sensor was calibrated to the baseline glucose level prior to the experiment, while the factory calibrated Libre 2 sensor does not provide this option and displayed 50-60 % lower results (BOB = bias over baseline, n = 3 for each sensor type).
Figure 5. Sensor response to an acetaminophen gradient (0-20 mg/dL) at stable glucose concentrations of 200 mg/dL at room temperature. The Dexcom G6 sensor was calibrated to the baseline glucose level prior to the experiment, while the factory calibrated Libre 2 sensor does not provide this option and displayed 50-60 % lower results (BOB = bias over baseline, n = 3 for each sensor type).CC BY-NC · PubMed Central
Figure 6. Impact of ambient temperature on the sensor signals in our in vitro test setup (n = 3 for each sensor type).
Figure 6. Impact of ambient temperature on the sensor signals in our in vitro test setup (n = 3 for each sensor type).CC BY-NC · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 16 references

Cited by

See all 20

Metadata

Authors
Pfützner, A., Jensch, H., Cardinal, C., Srikanthamoorthy, G., Riehn, E., & Thomé, N.
Affiliations
  • TH Bingen University of Applied Sciences (DE)
  • Pfützner Science & Health Institute, Mainz, Germany
Corresponding author
Pfützner, Andreas
Venue
Journal of Diabetes Science and Technology
Published
2022-05-13
Volume
18
Issue
1
Pages
59-65
ISSN
1932-2968 (ISSN-L)
OpenAlex
W4280533815
Cited by
20
References
16
Citations by year
2026: 2 · 2025: 9 · 2024: 1 · 2023: 6 · 2022: 2
FWCI
3.34
Type
journal article
Language
en
Open access
Licence
Locations
  • Journal of Diabetes Science and Technology (publishedVersion, cc-by-nc)
  • PubMed Central (publishedVersion, cc-by-nc)
  • PubMed (publishedVersion)
  • Zenodo (CERN European Organization for Nuclear Research) (cc-by)
Funders
  • H2020 Innovation Grant (951933 (ForgetDiabetes))
  • Lifescan Global Corporation (Unrestricted Grant)
Topics
  • Health Sciences › Medicine › Endocrinology, Diabetes and Metabolism › Diabetes Management and Research
  • Physical Sciences › Chemistry › Analytical Chemistry › Electrochemical sensors and biosensors
  • Health Sciences › Health Professions › Medical Laboratory Technology › Clinical Laboratory Practices and Quality Control
Keywords
continuous glucose monitoring, acetaminophen interference, maltose, Dexcom G6, FreeStyle Libre 2, temperature compensation, sensor calibration, glucose measurement accuracy
MeSH terms
Acetaminophen, Continuous Glucose Monitoring, Blood Glucose, Diabetes Mellitus, Type 1, Glucose, Humans, Maltose, Xylose, Blood Glucose Self-Monitoring, Reproducibility of Results

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Laboratory Protocol and Pilot Results for Dynamic Interference Testing of Continuous Glucose Monitoring Sensors. https://app.cochat.ai/papers/10.1177/19322968221095573
The paper
Pfützner, A., Jensch, H., Cardinal, C., Srikanthamoorthy, G., Riehn, E., & Thomé, N. (2024). Laboratory Protocol and Pilot Results for Dynamic Interference Testing of Continuous Glucose Monitoring Sensors. Journal of Diabetes Science and Technology. https://doi.org/10.1177/19322968221095573

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.