Biodegradable synthetic polymers for biomedical and tissue engineering applications: tailoring degradation kinetics with tissue regeneration timeline
Open accessThe DOI matches its Crossref record; 142 of the 142 references it cites were found in a registry or an index; none of the 119 sources its claims cite is checked for support yet.
Abstract
The adoption of biodegradable synthetic polymers in biomedical and tissue engineering becomes a focal point, offering alternative solutions to organ transplantation and conventional permanent restoration. The key principle in developing scaffold-based for physiological implantation is the synchronisation of polymer’s degradation kinetics with the regeneration timeline of host tissues. Different implantation lesions exhibit vastly different healing durations, ranging from a few weeks to several months or years. A mismatch timeline can be detrimental where premature degradation will remove the physical framework needed for cell integration, whereas overly slow degradation will restrict spaces for new tissue growth. This review study provides a comprehensive discussion on the degradation mechanisms of biodegradable synthetic polymers in physiological environments. Four widely studied polymers—polylactic acid (PLA), polyvinyl alcohol (PVA), polycaprolactone (PCL), and polyurethane (PU)—were reviewed in depth on the degradation mechanisms and influencing factors. Scientific experimental data from the previous studies were summarised, including degradation percentage, experimental conditions, degradation timeline, and estimated complete degradation period. Specifically, four degradation mechanisms are associated with the degradation of synthetic polymers in physiological environments including chemical hydrolysis, enzymatic-mediated metabolism, oxidative degradation, and pH-dependent degradation. Each of the mechanisms may act independently or synergistically under different biological conditions. The degradation of polymers is accordingly influenced by the chemical structures, fabrication routes, degradation pathways, and physicochemical factors. These data are correlated with their optimal use in biomedical and TE applications for fast regenerating tissues to slow-healing or load-bearing structures. Comprehensively, PVA is aligned well with short-to-intermediate healing tissues such as the skin and the cornea due to its high degradation capability, while PLA, PCL, and PU that degrade from weeks to years are suitable for mediate-healing soft tissues to long-term implantations such as load-bearing bone, cartilage, ligament, neural, and vascular implantations. By aligning polymer degradation profiles with the biological timelines of tissue regeneration, this review provides a translational framework for synthetic polymer selection to enable optimum scaffold’s functionalities and clinical outcomes.
Overview
CoChat Summary
## TL;DR
This review argues that biodegradable synthetic polymers for tissue engineering should be chosen and tuned so their degradation matches the regeneration timeline of the target tissue. It focuses on PLA, PVA, PCL, and PU, summarizing their degradation mechanisms, the factors that alter degradation, and how those profiles fit different biomedical applications.
## Key findings
- The paper states that different tissues regenerate on different timelines: skin can remodel in “as minimum as 2 weeks,” bone often needs “6–12 weeks,” and cartilage, ligament, vascular, and neural tissues can take “several months to over a year.”
- It identifies four main degradation mechanisms relevant to synthetic polymers in tissue engineering: chemical hydrolysis, enzymatic-mediated reaction, oxidative degradation, and pH-dependent degradation.
- For PLA, the review reports degradation examples ranging from very low loss to substantial loss depending on formulation and environment, including “0–1%” over 4 weeks for 3D-printed PLA in PBS, “20.10%” weight loss for PLA-casted scaffolds in PBS, and about “10%” weight loss at 20 weeks.
- For PVA, degradation ranged from “~90–100% after 10 days” for electrospun nanofibres in PBS to “~8–15% over 4 weeks” for freeze-thawed and freeze-dried scaffolds; the paper notes PVA is used mostly for skin TE that needs “days to weeks” of degradation.
- For PCL, the paper reports very slow degradation in many cases, including “0.6% in 28 days” for cylindrical filaments and “4–5% over” 28 weeks for electrospun nanofibres; it states PCL is widely used for bone TE.
- For PU, the review reports degradation examples from “2.7–5.0% at 12 months” for cast films to “80% over a span of three years” for foams, with the paper emphasizing its use in vascular and neural TE applications.
## Methods
- This is a narrative review article, not an original experimental study.
- It synthesizes published literature on biodegradable synthetic polymers, especially PLA, PVA, PCL, and PU, and compares reported degradation behaviors across studies.
- The main analysis is interpretive: it aligns polymer degradation kinetics with tissue regeneration timelines and discusses how structure, crystallinity, porosity, hydrophilicity, and surface chemistry affect degradation.
## Limitations
- The paper does not state a formal study limitation section; this is not stated in the paper.
- It explicitly says it focuses on selected biodegradable polymers and that “future studies” should extend the concepts to additional synthetic polymeric systems beyond the review’s scope.
- Evident from the text: the evidence base is heterogeneous across many cited studies with different materials, assays, media, and time points, so the comparisons are qualitative rather than a controlled head-to-head analysis.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures



![Fig. 4 Clearance routes for the degradation by-products of PLA, PVA, PCL, and PU that involve various functional organs such as kidney, lung, liver, and skin (created with NotebookLM) [54–56, 78, 79, 93, 103, 143, 144]](https://figures.cochat.ai/paper-figures/6e894ca601a247d6a5bb7ec7a14fc484/biodegradable-synthetic-polymers-for-biomedical-and-tissue-engineering-figure-4.jpg)
Verification
Claims the paper makes
0 Valid · 4 Not valid · 102 Not checked · 53 Own results and interpretations
None of the sources cited for this claim have been checked yet.
In the paper
“Another important trait to be emphasised in polymer selection is the biodegradable timeline where different types of tissue require different timelines for complete remodelling/regeneration in the human body.”
What the sources say
- Not checked yetcites [28] Qin J, Chen F, Wu P, Sun G. Recent advances in bioengineered scaffolds for cutaneous wound healing. Front Bioeng Biotechnol. 2022;1(10):841583. https://doi.org/10.3389/fbioe.2022.841583. source
- Not checked yetcites [29] Puodziunas V. Tissue Regeneration Process for Healing Injuries. Regenerative Healing: How the Body Repairs Tissue Damage. 2025. https://watersedgemedicalclinic.com/tissue-regeneration-process-for-healing-injuries. Accessed 26 Nov 2025
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Biodegradable scaffolds possess an ability to degrade simultaneously in the surrounding aqueous environment without the need for surgical removal [ 18 ].”
What the sources say
- Not checked yetcites [18] Haider A, Haider S, Kummara MR, Kamal T, Alghyamah A-A, Iftikhar FJ, et al. Advances in the scaffolds fabrication techniques using biocompatible polymers and their biomedical application: a technical and statistical review. J Saudi Chem Soc. 2020;24(2):186–215. https://doi.org/10.1016/j.jscs.2020.01.002. source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“In controlling the biodegradation of synthetic polymers, unstable chemical linkages such as amides, anhydrides, labile esters, orthoesters, etc., can be incorporated in polymer backbones as these bonds are prone to undergo common hydrolytic or enzymatic degradation mechanisms [ 34 ].”
What the sources say
- Not checked yetcites [34] Garcia-Garcia A, Muñana-González S, Lanceros-Mendez S, Ruiz-Rubio L, Alvarez LP, Vilas-Vilela JL. Biodegradable natural hydrogels for TE, controlled release, and soil remediation. Polymers. 2024;16(18):2599. https://doi.org/10.3390/polym16182599. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
None of the sources cited for this claim have been checked yet.
In the paper
“The kinetics of bond cleavage are directly correlated to the type of bonds present in a particular polymeric chain [ 35 , 36 ].”
What the sources say
- Not checked yetcites [35] Ewii UE, Onugwu AL, Nwokpor VC, Akpaso I, Ogbulie TE, Aharanwa B, et al. Novel drug delivery systems: insight into self-powered and nano-enabled drug delivery systems. Nano TransMed. 2024;3:100042. https://doi.org/10.1016/j.ntm.2024.100042. source
- Not checked yetcites [36] Grivet-Brancot A, Boffito M, Ciardelli G. Use of polyesters in fused deposition modeling for biomedical applications. Macromol Biosci. 2022;22(10):e2200039. https://doi.org/10.1002/mabi.202200039. source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
None of the sources cited for this claim have been checked yet.
In the paper
“To alleviate these limitations, tissue engineering (TE) in combination with biomaterials is known to be the most reliable alternative to replace the procedure of organ transplantation in supporting successful tissue regeneration [ 10 , 11 ].”
What the sources say
- Not checked yetcites [10] Han F, Wang J, Ding L, Hu Y, Li W, Yuan Z, et al. TE and regenerative medicine: achievements, future, and sustainability in Asia. Front Bioeng Biotechnol. 2020;8:83. https://doi.org/10.3389/fbioe.2020.00083. source
- Not checked yetcites [11] Liu S, Yu J-M, Gan Y-C, Qiu X-Z, Gao ZC, Wang H, et al. Biomimetic natural biomaterials for TE and regenerative medicine: New biosynthesis methods, recent advances, and emerging applications. Military Med Res. 2023. https://doi.org/10.1186/s40779-023-00448-w. source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
75 more claims
Create a free account to see all 159 claims and to verify the 119 references still open.
- Probably not a substantial claim. 40
- It may state two separate claims as one. 47
- The quote only partly states this claim. 3
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
This check didn’t finish.
Citations
Cites
Microbial and Enzymatic Degradation of Synthetic Plastics
Mohanan, N., Montazer, Z., Sharma, P. K., & Levin, D. B. (2020) · Frontiers in Microbiology · doi:10.3389/fmicb.2020.580709 · Cited by 1,122 · cited 2×
“Further degradation of urethane and urea units will direct into the release of free polyamines that depends on the initial composition of monomers [41].”
A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds
Reddy, M. S. B., Ponnamma, D., Choudhary, R., & Sadasivuni, K. K. (2021) · Polymers · doi:10.3390/polym13071105 · Cited by 1,104 · cited 1×
“Polymeric biodegradable materials can be classified into natural and synthetic polymers [15, 16].”
Bharadwaz, A., & Jayasuriya, A. C. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.110698 · Cited by 738
Zaaba, N. F., & Jaafar, M. (2020) · Polymer Engineering & Science · doi:10.1002/pen.25511 · Cited by 683 · cited 1×
“…by the amount of water penetrating amorphous regions; (3) the autocatalytic acceleration of hydrolysis caused by carboxylic end-group formation; and (4) the generation of hydrophilic degradation by-products, which ultimately results in substantial weight loss and dissolution of polymer matrix [57].”
Natural and Synthetic Polymers for Biomedical and Environmental Applications
Satchanska, G., Davidova, S., & Petrov, P. D. (2024) · Polymers · doi:10.3390/polym16081159 · Cited by 585 · cited 2×
“In addition, surface attributes including wettability, surface charge, polarity, surface roughness, and available chemical moieties on the surface exhibit important roles in aligning degradation targets [22].”
Poly(vinyl alcohol): review of its promising applications and insights into biodegradation
Ben Halima, N. (2016) · RSC Advances · doi:10.1039/c6ra05742j · Cited by 440 · cited 1×
“Polyvinyl alcohol is also degraded through a chemical hydrolysis mechanism at a relatively slow rate compared to an enzymatic-mediation reaction due to the stability of its carbon–carbon backbone and the absence of easily hydrolysable linkages such as esters or amides [79].”
Biodegradable materials for bone defect repair
Wei, S., Ma, J.-X., Xu, L., Gu, X.-S., & Ma, X.-L. (2020) · Military Medical Research · doi:10.1186/s40779-020-00280-6 · Cited by 406 · cited 1×
“Despite the biofunctional and bioactivity of natural-based polymers, synthetic polymers are worth expanding research, owing to their stability, mechanical integrity, uniform framework, sustainable degradation, versatile processing modification, and feasible resources [17].”
Khouri, N. G., Bahú, J. O., Blanco-Llamero, C., Severino, P., Concha, V. O. C., & Souto, E. B. (2024) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2024.138243 · Cited by 403 · cited 2×
“However, hydrolysis normally encompasses complex reaction pathways since several different cleavage reactions can happen side by side [52].”
Design Challenges in Polymeric Scaffolds for Tissue Engineering
Echeverria Molina, M. I., Malollari, K. G., & Komvopoulos, K. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.617141 · Cited by 397
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Research works printed but not linked: 2
- Saidin S, Muhamad Zain N, Mohd Daud N. Polymeric materials for drug delivery: insight into biomedical applications. 1st ed. Johor Bahru: Penerbit UTM Press; 2025.
- Selvaras T, Ali Alshamrani S, Gopal R, Jaganathan SK, Sivalingam S, Kadiman S, et al. Biodegradable and antithrombogenic chitosan/elastin blended polyurethane electrospun membrane for vascular tissue integration. J Biomed Mater Res B Appl Biomater. 2023;111:1171–81. https://doi.org/10.1002/jbm.b.35. · doi:10.1002/jbm.b.35
Cited by
Portan, D. V., Kontaxis, L. C., Tselepidi, A., Papanicolaou, G. C., & Azamfirei, L. (2026) · Polymers · doi:10.3390/polym18161984 · Cited by 2
“With prolonged exposure, these processes may lead to loss of polymer integrity, surface erosion, fragmentation, and eventual mass reduction [28,29].”
Di, J., He, Y., Sun, C., Jia, J., Zheng, X., & Li, X. (2026) · Gels · doi:10.3390/gels12060498
“[48–54] Biofunctionalization, through the grafting of anti-inflammatory factors and growth factors, provides the overarching direction for cell recruitment, inflammation suppression, and oriented differentiation in cartilage regeneration.”
Deng, W., Liu, Y., Zhong, Y., Wang, J., & Zhang, J. (2026) · International Journal of Nanomedicine · doi:10.2147/ijn.s625193
“59 ③ Protein-based materials, such as gelatin and collagen—for example, collagen hydrogels derived from porcine skin have shown controllable drug-release properties because of their transparency and rigidity 60 —and silk fibroin, 61 which can be structurally modified to prepare functional hydrogels…”
Demirci, G., Niedźwiedź, M., Kordek, W., Charęza, M., Drozd, R., & Fray, M. E. (2026) · European Polymer Journal · doi:10.1016/j.eurpolymj.2026.115175
Inside-out and monitoring-assisted phototheranostics enabled by molecular–optoelectronic integration
Xu, G., Zhong, Y., Zhang, Y., Law, W., & Xu, Z. (2026) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2026.218424
Metadata
- Authors
- Saidin, S., Zubairi, S. I., Ambreen, J., Md Lazim, N. A., Sadia, M., Lim, J. T. W., Ulum, M. F., Elliyanti, A., & Sefat, F.
- Affiliations
- University of Technology Malaysia (MY)
- National University of Malaysia (MY)
- COMSATS University Islamabad (PK)
- NED University of Engineering and Technology (PK)
- Newcastle University (GB)
- IPB University (ID)
- Andalas University (ID)
- University of Bradford (GB)
- Corresponding author
- Saidin, Syafiqah
- ORCID
- Venue
- BioMedical Engineering OnLine
- Published
- 2026-05-05
- Volume
- 25
- Issue
- 1
- ISSN
- 1475-925X (ISSN-L)
- PMC
- PMC13289440
- OpenAlex
- W7160285667
- Cited by
- 8
- References
- 142
- Citations by year
- 2026: 8
- FWCI
- 3.51
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor, 49 d)
- Locations
- BioMedical Engineering OnLine (publishedVersion, cc-by)
- PubMed (publishedVersion)
- PubMed Central (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- Department of Deputy Vice Chancellor (Research & Innovation), Universiti Teknologi Malaysia (Q.J130000.4609.00Q10)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- polymer degradation kinetics, tissue engineering scaffolds, polylactic acid, polyvinyl alcohol, polycaprolactone, polyurethane, hydrolytic degradation, enzymatic degradation, oxidative degradation, pH-dependent degradation, load-bearing implants
- MeSH terms
- Animals, Biocompatible Materials, Humans, Kinetics, Polymers, Regeneration, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biodegradable synthetic polymers for biomedical and tissue engineering applications: tailoring degradation kinetics with tissue regeneration timeline. https://app.cochat.ai/papers/10.1186/s12938-026-01550-5
- The paper
- Saidin, S., Zubairi, S. I., Ambreen, J., Md Lazim, N. A., Sadia, M., Lim, J. T. W., Ulum, M. F., Elliyanti, A., & Sefat, F. (2026). Biodegradable synthetic polymers for biomedical and tissue engineering applications: tailoring degradation kinetics with tissue regeneration timeline. BioMedical Engineering OnLine. https://doi.org/10.1186/s12938-026-01550-5
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.