The DOI matches its Crossref record; 104 of the 105 references it cites were found in a registry or an index.
Towards organ printing: engineering an intra-organ branched vascular tree
Open accessAbstract
IMPORTANCE OF THE FIELD: Effective vascularization of thick three-dimensional engineered tissue constructs is a problem in tissue engineering. As in native organs, a tissue-engineered intra-organ vascular tree must be comprised of a network of hierarchically branched vascular segments. Despite this requirement, current tissue-engineering efforts are still focused predominantly on engineering either large-diameter macrovessels or microvascular networks. AREAS COVERED IN THIS REVIEW: We present the emerging concept of organ printing or robotic additive biofabrication of an intra-organ branched vascular tree, based on the ability of vascular tissue spheroids to undergo self-assembly. WHAT THE READER WILL GAIN: The feasibility and challenges of this robotic biofabrication approach to intra-organ vascularization for tissue engineering based on organ-printing technology using self-assembling vascular tissue spheroids including clinically relevantly vascular cell sources are analyzed. TAKE HOME MESSAGE: It is not possible to engineer 3D thick tissue or organ constructs without effective vascularization. An effective intra-organ vascular system cannot be built by the simple connection of large-diameter vessels and microvessels. Successful engineering of functional human organs suitable for surgical implantation will require concomitant engineering of a 'built in' intra-organ branched vascular system. Organ printing enables biofabrication of human organ constructs with a 'built in' intra-organ branched vascular tree.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“This results in the easy isolation of autologous EPCs from peripheral blood, lipoaspirate tissue, and bone marrow in sufficient number, holding promising potential for reendothelization of decellularized livers for clinical application [239].”
From Liver tissue engineering using decellularized scaffolds: Current progress, challenges, and opportunities (2024) · cites this paper as [239]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Clinical transplantation of a tissue-engineered airway
Macchiarini, P., Jungebluth, P., Go, T., Asnaghi, M. A., Rees, L., Cogan, T. A., Dodson, A., Martorell, J., Bellini, S., Parnigotto, P. P., et al. (2008) · The Lancet · doi:10.1016/s0140-6736(08)61598-6 · Cited by 1,431
RetractedLanger, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Multilineage Cells from Human Adipose Tissue: Implications for Cell-Based Therapies
Zuk, P. A., Zhu, M., Mizuno, H., Huang, J., Futrell, J. W., Katz, A. J., Benhaim, P., Lorenz, H. P., & Hedrick, M. H. (2001) · Tissue Engineering · doi:10.1089/107632701300062859 · Cited by 7,956
Risau, W. (1997) · Nature · doi:10.1038/386671a0 · Cited by 5,727
Mechanisms of angiogenesis and arteriogenesis
Carmeliet, P. (2000) · Nature Medicine · doi:10.1038/74651 · Cited by 4,235
Liao, J., Wei, Q., Zou, Y., Fan, J., Song, D., Cui, J., Zhang, W., Zhu, Y., Ma, C., Hu, X. Y., et al. (2017) · Cellular Physiology and Biochemistry · doi:10.1159/000471945 · Cited by 2,742
Perfusion-decellularized matrix: using nature's platform to engineer a bioartificial heart
Ott, H. C., Matthiesen, T. S., Goh, S.-K., Black, L. D., Kren, S. M., Netoff, T. I., & Taylor, D. A. (2008) · Nature Medicine · doi:10.1038/nm1684 · Cited by 2,650
Human induced pluripotent stem cells free of vector and transgene sequences
Yu, J., Hu, K., Smuga-Otto, K., Tian, S., Stewart, R., Slukvin, I. I., & Thomson, J. A. (2009) · Science · doi:10.1126/science.1172482 · Cited by 2,386
The Physiological Principle of Minimum Work
Murray, C. D. (1926) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.12.3.207 · Cited by 2,105
Tissue-engineered autologous bladders for patients needing cystoplasty
Atala, A., Bauer, S. B., Söker, S., Yoo, J. J., & Retik, A. B. (2006) · The Lancet · doi:10.1016/s0140-6736(06)68438-9 · Cited by 1,857
Research works printed but not linked: 4
- Jakab K, 2004, Biorheology, 41, 371
- Jarrell BE, 1986, Surgery, 100, 392
- 10.1002/stem.20080922 · DOI
- Kostrominova TY, 2009, Histol Histopathol, 24, 541
Cited by
Sorted by citations
Items 101–200 of 224
Shanmugam, D. K., Anitha, S., Souresh, V., Madhavan, Y., Sampath, S., Venugopal, D. C., & Saravanan, M. (2023) · Materials Technology · doi:10.1080/10667857.2023.2242732 · Cited by 45
3D Printing and Biofabrication for Load Bearing Tissue Engineering
Jeong, C. G., & Atala, A. (2015) · Advances in experimental medicine and biology · doi:10.1007/978-3-319-22345-2_1 · Cited by 35
Patterning Vasculature: The Role of Biofabrication to Achieve an Integrated Multicellular Ecosystem
Malheiro, A., Wieringa, P. A., Mota, C., Baker, M. B., & Moroni, L. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00269 · Cited by 33
3D Bioprinting of Nature-Inspired Hydrogel Inks Based on Synthetic Polymers
Kumar, S., Tharayil, A., & Thomas, S. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00567 · Cited by 36
Considerations for the Bioengineering of Advanced Cardiac In Vitro Models of Myocardial Infarction
Sharma, P., Wang, X., Ming, C. L. C., Vettori, L., Figtree, G. A., Boyle, A., & Gentile, C. (2021) · Small · doi:10.1002/smll.202003765 · Cited by 40
Self-citationGlobal hotspots and emerging trends in 3D bioprinting research
Ding, Z., Tang, N., Huang, J., Cao, X., & Wu, S. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1169893 · Cited by 37
Engineering a Chemically Defined Hydrogel Bioink for Direct Bioprinting of Microvasculature
Barrs, R. W., Jia, J., Ward, M., Richards, D., Yao, H., Yost, M. J., & Mei, Y. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00947 · Cited by 36
Connexins and the gap in context
Mroue, R. M., El-Sabban, M. E., & Talhouk, R. (2011) · Integrative Biology · doi:10.1039/c0ib00158a · Cited by 34
Bioengineered Vascular Scaffolds: The State of the Art
Palumbo, V. D., Bruno, A., Tomasello, G., Damiano, G., & Monte, A. I. L. (2014) · The International Journal of Artificial Organs · doi:10.5301/ijao.5000343 · Cited by 33
Tissue strands as “bioink” for scale-up organ printing
Yu, Y., & Ozbolat, I. T. (2014) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2014.6943868 · Cited by 32
Additive Manufacturing of Biomedical Constructs with Biomimetic Structural Organizations
Li, X., He, J., Zhang, W., Jiang, N., & Li, D. (2016) · Materials · doi:10.3390/ma9110909 · Cited by 31
Sego, T. J., Kasacheuski, U., Hauersperger, D., Andrés Tovar, A., & Moldovan, N. I. (2017) · Biofabrication · doi:10.1088/1758-5090/aa6ed4 · Cited by 32
Khanna, A., Ayan, B., Undieh, A. A., Yang, Y., & Huang, N. F. (2022) · Journal of Molecular and Cellular Cardiology · doi:10.1016/j.yjmcc.2022.04.017 · Cited by 38
Chogan, F., Chen, Y. A., Wood, F. M., & Jeschke, M. G. (2022) · Journal of Burn Care & Research · doi:10.1093/jbcr/irac127 · Cited by 32
Ringeisen, B. R., Rincon, K., Fitzgerald, L. A., Fulmer, P. A., & Wu, P. (2014) · Methods in Ecology and Evolution · doi:10.1111/2041-210x.12303 · Cited by 30
3D Human Skin Bioprinting: A View from the Bio Side
Velasco, D., Quílez, C., García, M., del Cañizo, J. F., & Jorcano, J. L. (2018) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2018-0008 · Cited by 31
Three-Dimensional Cell Cultures in Drug Discovery and Development
Ye, F., & Eglen, R. M. (2017) · SLAS DISCOVERY · doi:10.1177/2472555217696795 · Cited by 35
Medical applications of stereolithography: An overview
Stawicki, S. P., Kaza, A., Rembalsky, J., Roma, N., Yellapu, V., & Delong, W. (2018) · International Journal of Academic Medicine · doi:10.4103/ijam.ijam_54_18 · Cited by 30
Mimicking the biological world: Methods for the 3 D structuring of artificial cellular environments
Schober, A., Fernekorn, U., Singh, S., Schlingloff, G., Gebinoga, M., Hampl, J., & Williamson, A. (2013) · Engineering in Life Sciences · doi:10.1002/elsc.201200088 · Cited by 29
Update on Vascularization in Tissue Engineering
Post, M. J., Rahimi, N., & Caolo, V. (2013) · Regenerative Medicine · doi:10.2217/rme.13.74 · Cited by 30
Corona, B. T., Ward, C., Harrison, B., & Christ, G. (2010) · Journal of Investigative Medicine · doi:10.2310/jim.0b013e3181efbc61 · Cited by 17
Principles of Tissue Engineering for Food
Post, M. J., & van der Weele, C. (2013) · Elsevier eBooks · doi:10.1016/b978-0-12-398358-9.00078-1 · Cited by 29
3D bioprinting of the kidney—hype or hope?
Turunen, S., 1 3DTech Oy, H. 1., Kaisto, S., Skovorodkin, I., Mironov, V. A., Kalpio, T., Vainio, S. J., Rak‐Raszewska, A., & 4 3D Bioprinting Solutions, 6. K. H. (2018) · AIMS Cell and Tissue Engineering · doi:10.3934/celltissue.2018.3.119 · Cited by 28
Self-citationHussein, K. H., Ahmadzada, B., Correa, J. C., Sultan, A., Wilken, S., Amiot, B., & Nyberg, S. L. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.06.001 · Cited by 28
“This results in the easy isolation of autologous EPCs from peripheral blood, lipoaspirate tissue, and bone marrow in sufficient number, holding promising potential for reendothelization of decellularized livers for clinical application [239].”
BackgroundBioprinting Using Organ Building Blocks: Spheroids, Organoids, and Assembloids
Baptista, L. S., Mironov, V. A., Koudan, E. V., Amorim, É. A., Pampolha, T. P., Kasyanov, V. A., Kovalev, A., Senatov, F. S., & Granjeiro, J. M. (2023) · Tissue Engineering Part A · doi:10.1089/ten.tea.2023.0198 · Cited by 27
Self-citationCardiac Spheroids as in vitro Bioengineered Heart Tissues to Study Human Heart Pathophysiology
Sharma, P., & Gentile, C. (2021) · Journal of Visualized Experiments · doi:10.3791/61962 · Cited by 27
Self-citationBioprinting Essentials of Cell and Protein Viability
Skardal, A. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00001-3 · Cited by 27
3D Printing Technologies and Their Applications in Biomedical Science
Bakhtiar, S. M., Butt, H. A., Zeb, S., Quddusi, D. M., Gul, S., & Dilshad, E. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-804659-3.00010-5 · Cited by 27
Moriyama, K., Naito, S., Wakabayashi, R., Goto, M., & Kamiya, N. (2016) · Biotechnology Journal · doi:10.1002/biot.201600087 · Cited by 26
Kumar, P., Roy, S., Hegde, H. V., Bharti, S., & Kumar, M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815890-6.00008-6 · Cited by 25
Apelgren, P., Amoroso, M., Säljö, K., Montelius, M., Lindahl, A. H., Orrhult, L. S., Gatenholm, P., & Kölby, L. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.121002 · Cited by 23
Three-dimensional bioprinting speeds up smart regenerative medicine
Gu, Q., Zhu, H., Li, J., Li, X., Hao, J., Wallace, G. G., & Zhou, Q. (2016) · National Science Review · doi:10.1093/nsr/nww037 · Cited by 24
Stem Cell-Derived Cardiac Spheroids as 3D In Vitro Models of the Human Heart Microenvironment
Campbell, M., Chabria, M., Figtree, G. A., Polonchuk, L., & Gentile, C. (2018) · Methods in molecular biology · doi:10.1007/7651_2018_187 · Cited by 23
Self-citation3D printing in the research and development of medical devices
Zhou, H., & Bhaduri, S. B. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-813477-1.00012-8 · Cited by 22
A Phase Field Approach for Multicellular Aggregate Fusion in Biofabrication
Yang, X., Sun, Y. N., & Wang, Q. (2013) · Journal of Biomechanical Engineering · doi:10.1115/1.4024139 · Cited by 21
Cardiac Extracellular Matrix Modification as a Therapeutic Approach
Hall, M. L., & Ogle, B. M. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-3-319-97421-7_7 · Cited by 19
Additive Manufacturing Processes
Weißenfels, C. (2021) · Lecture notes in applied and computational mechanics · doi:10.1007/978-3-030-87337-0_2 · Cited by 21
Fang, L., Liu, Z., Wang, C., Shi, M., He, Y., Lu, A., Li, X., Li, T., Zhu, D., Zhang, B., et al. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.07.003 · Cited by 20
Decarli, M. C., de Castro, M. V., Nogueira, J. A., Nagahara, M. H. T., Westin, C. B., de Oliveira, A. L. R., da Silva, J. V. L., Moroni, L., Mota, C., & Moraes, Â. M. (2022) · Biomaterials Advances · doi:10.1016/j.msec.2022.112685 · Cited by 20
Vascularization of Biomaterials for Bone Tissue Engineering: Current Approaches and Major Challenges
Jabbarzadeh, E., Blanchette, J. O., Shazly, T. M., Khademhosseini, A., Camci‐Unal, G., & Laurencin, C. T. (2012) · Current Angiogenesis · doi:10.2174/2211552811201030180 · Cited by 19
Application of microtechnologies for the vascularization of engineered tissues
Gauvin, R., Guillemette, M. D., Dokmeci, M. R., & Khademhosseini, A. (2011) · Vascular Cell · doi:10.1186/2045-824x-3-24 · Cited by 18
Das, K. K., Tiwari, R. M., Shankar, O., Maiti, P., & Dubey, A. K. (2024) · MedComm – Biomaterials and Applications · doi:10.1002/mba2.88 · Cited by 16
Autologous Cells for Kidney Bioengineering
Wilm, B., Tamburrini, R., Orlando, G., & Murray, P. A. (2016) · Current Transplantation Reports · doi:10.1007/s40472-016-0107-8 · Cited by 16
Robu, A., Mironov, V. A., & Neagu, A. (2019) · Computational and Mathematical Methods in Medicine · doi:10.1155/2019/7853586 · Cited by 15
Self-citationLeaf-inspired artificial microvascular networks (LIAMN) for three-dimensional cell culture
Fan, R., Sun, Y.-H., & Wan, J. (2015) · RSC Advances · doi:10.1039/c5ra20265e · Cited by 15
Kasyanov, V. A., Brakke, K. A., Vilbrandt, T., Moreno-Rodriguez, R., Mehesz, A. N., Visconti, R. B., Markwald, R. R., Ozolanta, I., Rezende, R. A., Filho, A. L. L., et al. (2011) · Virtual and Physical Prototyping · doi:10.1080/17452759.2011.631738 · Cited by 15
Self-citationBiofabrication Technologies for Developing In Vitro Tumor Models
Mazzocchi, A. R., Söker, S., & Skardal, A. (2017) · Cancer drug discovery and develogment/Cancer drug discovery and development · doi:10.1007/978-3-319-60511-1_4 · Cited by 14
Modeling of pneumatic valve dispenser for printing viscous biomaterials in additive manufacturing
Ren, X., Zhang, Q., Liu, K., Li, H.-L., & Zhou, J. G. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2013-0025 · Cited by 14
Chang, K.-H. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-382038-9.00014-4 · Cited by 14
Recent Advances in Nanostructured Polymer Composites for Biomedical Applications
Silva, A. D. R., Stocco, T. D., Granato, A. E. C., Harb, S. V., Afewerki, S., Bassous, N. J., Hammer, P., Webster, T. J., Marciano, F. R., & Lobo, A. O. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816771-7.00002-8 · Cited by 14
Organ Printing With Life Cells: A Review
Malyala, S. K., Kumar, Y. R., & Rao, C. S. P. (2017) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.01.122 · Cited by 13
Current Technologies Based on the Knowledge of the Stem Cells Microenvironments
Mawad, D., Figtree, G. A., & Gentile, C. (2017) · Advances in experimental medicine and biology · doi:10.1007/978-3-319-69194-7_13 · Cited by 13
Self-citationVascularization in 3D printed tissues: emerging technologies to overcome longstanding obstacles
Grover, H., Spatarelu, C.-P., De'De', K., Zhao, S., Yang, K., Zhang, Y. S., & Chen, Z. (2018) · AIMS Cell and Tissue Engineering · doi:10.3934/celltissue.2018.3.163 · Cited by 14
Melchiorri, A. J., & Fisher, J. P. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00020-7 · Cited by 12
Kronemberger, G. S., Beatrici, A., Dalmônico, G. M. L., ROSSI, A. L., Miranda, G. A. S. C., Boldrini, L. C., Granjeiro, J. M., & Baptista, L. S. (2021) · Artificial Organs · doi:10.1111/aor.14000 · Cited by 11
Rezende, R. A., Selishchev, S. V., Kasyanov, V. A., da Silva, J. V. L., & Mironov, V. A. (2013) · Biomedical Engineering · doi:10.1007/s10527-013-9348-3 · Cited by 12
Self-citationContinuum Modeling and Simulation in Bone Tissue Engineering
Sanz‐Herrera, J. A., & Reina-Romo, E. (2019) · Applied Sciences · doi:10.3390/app9183674 · Cited by 11
Giannini, C., Terzi, A., Fusaro, L., Sibillano, T., Díaz, A., Ramella, M., Lutz‐Bueno, V., Boccafoschi, F., & Bunk, O. (2019) · Journal of Biophotonics · doi:10.1002/jbio.201900106 · Cited by 11
Li, Y., Wu, Q., Yang, Z., He, Y., Weng, C., Gao, M., Zhang, B., Wang, Y., Li, L., Chen, F., et al. (2019) · Liver International · doi:10.1111/liv.14267 · Cited by 11
3D Printing of Hydrogel-Based Biocompatible Materials
Preobrazhenskii, I. I., & Putlyaev, V. I. (2022) · Russian Journal of Applied Chemistry · doi:10.1134/s1070427222060027 · Cited by 10
The Role of Information Technology in the Future of 3D Biofabrication
Dernowsek, J., Rezende, R. A., & da Silva, J. V. L. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2016-0005 · Cited by 10
Digital biomanufacturing supporting vascularization in 3D bioprinting
Whitford, W. G., & Hoying, J. B. (2017) · International Journal of Bioprinting · doi:10.18063/ijb.2017.01.002 · Cited by 9
Tissue engineering and cell-based therapy toward integrated strategy with artificial organs
Gojo, S., Toyoda, M., & Umezawa, A. (2011) · Journal of Artificial Organs · doi:10.1007/s10047-011-0578-4 · Cited by 9
Alshehri, S., Karan, R., Ghalayini, S., Kahin, K., Khan, Z. N., Renn, D., Mathew, S., Rueping, M., & Hauser, C. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i3.489 · Cited by 7
Computer-Aided Manufacturing in Medicine
Abboud, M. F., & Orentlicher, G. (2012) · Atlas of the Oral and Maxillofacial Surgery Clinics · doi:10.1016/j.cxom.2012.01.001 · Cited by 9
ADVANCED TISSUE ENGINEERING STRATEGIES FOR VASCULARIZED PARENCHYMAL CONSTRUCTS
He, J., Xu, F., Liu, Y., Jin, Z., & Li, D. (2013) · Journal of Mechanics in Medicine and Biology · doi:10.1142/s0219519414300014 · Cited by 8
Williams, S. K., & Hoying, J. B. (2015) · Stem cell biology and regenerative medicine · doi:10.1007/978-3-319-21386-6_1 · Cited by 9
HyStem®: A Unique Clinical Grade Hydrogel for Present and Future Medical Applications
Zarembinski, T. I., & Skardal, A. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.81344 · Cited by 8
Melchels, F. P. W., Malda, J., Fedorovich, N. E., Alblas, J., & Woodfield, T. B. F. (2011) · Comprehensive Biomaterials · doi:10.1016/b978-0-08-055294-1.00195-1 · Cited by 8
3D printed hydrogel scaffold promotes the formation of hormone-active engineered parathyroid tissue
Gökyürek, M., Güler, S., Gökyer, Ş., Yazıhan, N., Akıncı, M., Gülçelik, M. A., Yılmaz, K. B., & Yilgor, P. (2023) · Biomedical Materials · doi:10.1088/1748-605x/acc99d · Cited by 7
Tissue Engineering von Gefäßprothesen
Walpoth, B. H., & Möller, M. (2011) · Der Chirurg · doi:10.1007/s00104-010-2029-9 · Cited by 7
Cardiac Spheroids as in vitro Bioengineered Heart Tissues to Study Human Heart Pathophysiology
Sharma, P., & Gentile, C. (2021) · Journal of Visualized Experiments · doi:10.3791/61962-v · Cited by 7
Self-citationApeldoorn, C., Safaei, S., Paton, J. F. R., & Talou, G. D. M. (2022) · WIREs Mechanisms of Disease · doi:10.1002/wsbm.1579 · Cited by 6
da Graca, B., & Filardo, G. (2010) · The American Journal of Cardiology · doi:10.1016/j.amjcard.2010.08.056 · Cited by 6
Bone and Cartilage from Stem Cells: Growth Optimalization and Stabilization of Cell Phenotypes
O, J., Janne, E., Tommy, A., Rune, B., Engebretsen, L., Stale, P., Duroux-Richard, I., Jørgensen, C., & Jan, E. (2011) · InTech eBooks · doi:10.5772/19826 · Cited by 5
Mironov, V. A., Rezende, R. A., Kasyanov, V. A., & da Silva, J. V. L. (2013) · IFAC Proceedings Volumes · doi:10.3182/20130911-3-br-3021.00124 · Cited by 5
Self-citationProspects for fabrication of artificial human tissues and organs based on 3D bioprinting
Bulgin, D. V., Kovtun, A. L., Reshetov, I. V., & Radomskaya, E. Y. (2023) · Russian Journal of Transplantology and Artificial Organs · doi:10.15825/1995-1191-2023-2-63-81 · Cited by 5
Physically-based simulation of elastic-plastic fusion of 3D bioprinted spheroids
Bahrami, H., Sichetti, F., Puppo, E., Vettori, L., Ming, C. L. C., Perry, S. W., Gentile, C., & Pietroni, N. (2023) · Biofabrication · doi:10.1088/1758-5090/acf2cb · Cited by 5
Self-citationManufacturing of Biomaterials via a 3D Printing Platform
Thayer, P. S., Martinez, H., & Gatenholm, E. (2018) · doi:10.1002/9783527813704.ch4 · Cited by 5
Chang, K.-H. (2013) · Elsevier eBooks · doi:10.1016/b978-0-12-401745-0.00005-8 · Cited by 4
Nanotechnology-based regenerative approaches
Roy, S., Das, A., Chakraborty, T., & Bhattacharya, B. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95134-0.00005-5 · Cited by 4
Biofabrication of Vascular Networks
Hoying, J. B., & Williams, S. K. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800972-7.00019-0 · Cited by 4
Design of vascular tree for organ bioprinting
Rezende, R. A., Kasyanov, V. A., Ozolanta, I., Brakke, K. A., da Silva, J. V. L., & Mironov, V. A. (2013) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-444-63234-0.50026-9 · Cited by 4
Self-citationEditorial: 3D Bioprinting of Vascularized Tissues for In Vitro and In Vivo Applications
Gentile, C., Lim, K. S., & Vozzi, G. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.754124 · Cited by 4
Self-citationMODERN VIEWS ON THE FUNCTIONAL MORPHOLOGY AND REPARATIVE PROPERTIES OF THE LIVER
Mustafina, Н. M., Старченко, И. И., Koka, V. М., & Лукачіна, Є. І. (2020) · Bulletin of Problems Biology and Medicine · doi:10.29254/2077-4214-2020-2-156-43-48 · Cited by 4
Extracellular Matrix-like Hydrogels for Applications in Regenerative Medicine
Skardal, A. (2014) · Royal Society of Chemistry eBooks · doi:10.1039/9781782622055-00191 · Cited by 3
Microvascular Networks and Models: In Vitro Formation
Blache, U., Guerrero, J., Güven, S., Klar, A. S., & Scherberich, A. (2021) · Reference series in biomedical engineering · doi:10.1007/978-3-319-54586-8_9 · Cited by 3
Principles of tissue engineering for food
Post, M. J., & van der Weele, C. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818422-6.00074-5 · Cited by 3
Simulation of a 3D Bioprinted Human Vascular Segment
Nogueira, J. A., Lara, V. F., Marques, T., Oliveira, D. F. D., Mironov, V. A., da Silva, J. V. L., & Rezende, R. A. (2015) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-444-63578-5.50109-2 · Cited by 2
Self-citationStem Cell-Based 3D Bioprinting for Cardiovascular Tissue Regeneration
Ming, C. L. C., Ben-Sefer, E., & Gentile, C. (2022) · Springer eBooks · doi:10.1007/978-3-030-86140-7_13 · Cited by 3
Self-citationSpatial Patterning of Stem Cells to Engineer Microvascular Networks
Kharaziha, M., & Nikkhah, M. (2015) · Springer eBooks · doi:10.1007/978-3-319-20726-1_7 · Cited by 2
Drop formation from axi-summetric fluid jets
Driessen, T. S. H. (2013) · doi:10.3990/1.9789036535786 · Cited by 2
Bioprinting Tissues and Organs
Rezende, R. A., Mironov, V. A., & da Silva, J. V. L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.04139-4 · Cited by 2
Self-citationAdditively manufactured smart materials and structures for various biomedical applications
Sharma, N., Barua, D. R., Jain, N., & Datta, S. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-16144-5.00003-x · Cited by 1
Ecology of a Simple Synthetic Biofilm
Nelson, E. M., Mirsaidov, U. M., Sarveswaran, K., Perry, N., Kurz, V., Timp, W., & Timp, G. L. (2014) · Biological and medical physics, biomedical engineering · doi:10.1007/978-1-4939-1402-9_11 · Cited by 1
Principles and applications of bioprinting
Skardal, A. (2018) · CRC Press eBooks · doi:10.1201/b21916-1 · Cited by 1
Bioprinting of vascularized tissues
Wu, Y. B., Fuh, J. Y. H., & Ozbolat, I. T. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-824291-9.00005-1 · Cited by 1
Albustanlıoğlu, T., Durmaz, N., Glaue, Ş. Ö., Noyan, E., Yılmaz, İ., İpar, M. S., Bucak, T., Akçura, G., Kalkan, G., Kaya, B., et al. (2022) · Akademisyen Kitabevi eBooks · doi:10.37609/akya.960 · Cited by 1
Microvascular Networks and Models, In vitro Formation
Blache, U., Guerrero, J., Güven, S., Klar, A. S., & Scherberich, A. (2017) · Springer eBooks · doi:10.1007/978-3-319-21056-8_9-1 · Cited by 2
Historia de los cultivos de células animales in vitro y su importancia en la actualidad
Reyes, L. S., Jimenez, Á. M., Herrera, C. R., & Gama, J. M. M. (2017) · Revista Biociencias · doi:10.18041/2390-0512/bioc..2.2293 · Cited by 1
Metadata
- Authors
- Visconti, R. P., Kasyanov, V., Gentile, C., Zhang, J., Markwald, R. R., & Mironov, V.
- Affiliations
- Medical University of South Carolina (US)
- Riga Stradiņš University (LV)
- Corresponding author
- Mironov, Vladimir
- Venue
- Expert Opinion on Biological Therapy
- Publisher
- Informa Healthcare
- Published
- 2010-02-04
- Volume
- 10
- Issue
- 3
- Pages
- 409-420
- ISSN
- 1471-2598 (ISSN-L)
- 1744-7682
- PMC
- PMC4580374
- OpenAlex
- W2052215721
- Cited by
- 224
- References
- 105
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 5 · 2023: 11 · 2022: 15 · 2021: 19 · 2020: 12 · 2019: 12 · 2018: 20 · 2017: 25 · 2016: 19 · 2015: 15 · 2014: 18 · 2013: 19 · 2012: 12
- FWCI
- 1.34
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Expert Opinion on Biological Therapy (publishedVersion)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- publication.editionName
- Funders
- National Institutes of Health (5p20rr016461-11, 1c06rr015455-01a1, 1c06rr018823-01)
- National Center for Research Resources (RR16434-08, P20RR016434, P20RR021949, 2 P20 RR16461-05A1, C06 RR-015455, C06 RR-018823, P 20 RR-016461)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- organ printing, self-assembly, 3D tissue constructs, organ engineering, microvascular networks
- MeSH terms
- Animals, Blood Vessels, Feasibility Studies, Humans, Robotics, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
