The DOI matches its Crossref record; 104 of the 105 references it cites were found in a registry or an index.
Towards organ printing: engineering an intra-organ branched vascular tree
Open accessAbstract
IMPORTANCE OF THE FIELD: Effective vascularization of thick three-dimensional engineered tissue constructs is a problem in tissue engineering. As in native organs, a tissue-engineered intra-organ vascular tree must be comprised of a network of hierarchically branched vascular segments. Despite this requirement, current tissue-engineering efforts are still focused predominantly on engineering either large-diameter macrovessels or microvascular networks. AREAS COVERED IN THIS REVIEW: We present the emerging concept of organ printing or robotic additive biofabrication of an intra-organ branched vascular tree, based on the ability of vascular tissue spheroids to undergo self-assembly. WHAT THE READER WILL GAIN: The feasibility and challenges of this robotic biofabrication approach to intra-organ vascularization for tissue engineering based on organ-printing technology using self-assembling vascular tissue spheroids including clinically relevantly vascular cell sources are analyzed. TAKE HOME MESSAGE: It is not possible to engineer 3D thick tissue or organ constructs without effective vascularization. An effective intra-organ vascular system cannot be built by the simple connection of large-diameter vessels and microvessels. Successful engineering of functional human organs suitable for surgical implantation will require concomitant engineering of a 'built in' intra-organ branched vascular system. Organ printing enables biofabrication of human organ constructs with a 'built in' intra-organ branched vascular tree.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“This results in the easy isolation of autologous EPCs from peripheral blood, lipoaspirate tissue, and bone marrow in sufficient number, holding promising potential for reendothelization of decellularized livers for clinical application [239].”
From Liver tissue engineering using decellularized scaffolds: Current progress, challenges, and opportunities (2024) · cites this paper as [239]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Clinical transplantation of a tissue-engineered airway
Macchiarini, P., Jungebluth, P., Go, T., Asnaghi, M. A., Rees, L., Cogan, T. A., Dodson, A., Martorell, J., Bellini, S., Parnigotto, P. P., et al. (2008) · The Lancet · doi:10.1016/s0140-6736(08)61598-6 · Cited by 1,431
RetractedLanger, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Multilineage Cells from Human Adipose Tissue: Implications for Cell-Based Therapies
Zuk, P. A., Zhu, M., Mizuno, H., Huang, J., Futrell, J. W., Katz, A. J., Benhaim, P., Lorenz, H. P., & Hedrick, M. H. (2001) · Tissue Engineering · doi:10.1089/107632701300062859 · Cited by 7,956
Risau, W. (1997) · Nature · doi:10.1038/386671a0 · Cited by 5,727
Mechanisms of angiogenesis and arteriogenesis
Carmeliet, P. (2000) · Nature Medicine · doi:10.1038/74651 · Cited by 4,235
Liao, J., Wei, Q., Zou, Y., Fan, J., Song, D., Cui, J., Zhang, W., Zhu, Y., Ma, C., Hu, X. Y., et al. (2017) · Cellular Physiology and Biochemistry · doi:10.1159/000471945 · Cited by 2,742
Perfusion-decellularized matrix: using nature's platform to engineer a bioartificial heart
Ott, H. C., Matthiesen, T. S., Goh, S.-K., Black, L. D., Kren, S. M., Netoff, T. I., & Taylor, D. A. (2008) · Nature Medicine · doi:10.1038/nm1684 · Cited by 2,650
Human induced pluripotent stem cells free of vector and transgene sequences
Yu, J., Hu, K., Smuga-Otto, K., Tian, S., Stewart, R., Slukvin, I. I., & Thomson, J. A. (2009) · Science · doi:10.1126/science.1172482 · Cited by 2,386
The Physiological Principle of Minimum Work
Murray, C. D. (1926) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.12.3.207 · Cited by 2,105
Tissue-engineered autologous bladders for patients needing cystoplasty
Atala, A., Bauer, S. B., Söker, S., Yoo, J. J., & Retik, A. B. (2006) · The Lancet · doi:10.1016/s0140-6736(06)68438-9 · Cited by 1,857
Research works printed but not linked: 4
- Jakab K, 2004, Biorheology, 41, 371
- Jarrell BE, 1986, Surgery, 100, 392
- 10.1002/stem.20080922 · DOI
- Kostrominova TY, 2009, Histol Histopathol, 24, 541
Cited by
Sorted by citations
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,942
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,005
Engineering Stem Cell Organoids
Yin, X., Mead, B. E., Safaee, H., Langer, R., Karp, J. M., & Levy, O. (2016) · Cell Stem Cell · doi:10.1016/j.stem.2015.12.005 · Cited by 866
Three-Dimensional Cell Cultures in Drug Discovery and Development
Fang, Y., & Eglen, R. M. (2017) · SLAS Discovery · doi:10.1177/1087057117696795 · Cited by 849
Cultured meat from stem cells: Challenges and prospects
Post, M. J. (2012) · Meat Science · doi:10.1016/j.meatsci.2012.04.008 · Cited by 846
Bioprinted Amniotic Fluid-Derived Stem Cells Accelerate Healing of Large Skin Wounds
Skardal, A., Mack, D. L., Kapetanovic, E., Atala, A., Jackson, J. D., Yoo, J. J., & Söker, S. (2012) · Stem Cells Translational Medicine · doi:10.5966/sctm.2012-0088 · Cited by 663
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D., Pollard, S., Tan, Y. J., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 551
Self-citationEvaluation of hydrogels for bio‐printing applications
Murphy, S. V., Skardal, A., & Atala, A. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34326 · Cited by 547
Overview of Current Additive Manufacturing Technologies and Selected Applications
Horn, T., & Harrysson, O. L. A. (2012) · Science Progress · doi:10.3184/003685012x13420984463047 · Cited by 546
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M. A., Fisher, J. P., & Zhang, L. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 552
Biomaterials for Integration with 3-D Bioprinting
Skardal, A., & Atala, A. (2014) · Annals of Biomedical Engineering · doi:10.1007/s10439-014-1207-1 · Cited by 476
Vascular Tissue Engineering: Progress, Challenges, and Clinical Promise
Song, H.-H. G., Rumma, R. T., Ozaki, C. K., Edelman, E. R., & Chen, C. S. (2018) · Cell Stem Cell · doi:10.1016/j.stem.2018.02.009 · Cited by 476
3D bioprinting of functional human skin: production and in vivo analysis
Cubo, N., García, M., del Cañizo, J. F., Velasco, D., & Jorcano, J. L. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/015006 · Cited by 458
Advances in Regenerative Medicine and Tissue Engineering: Innovation and Transformation of Medicine
Dzobo, K., Thomford, N. E., Senthebane, D. A., Shipanga, H., Rowe, A., Dandara, C., Pillay, M., & Motaung, K. S. (2018) · Stem Cells International · doi:10.1155/2018/2495848 · Cited by 477
Bioprinting for vascular and vascularized tissue biofabrication
Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431
Cell patterning technologies for organotypic tissue fabrication
Guillotin, B., & Guillemot, F. (2011) · Trends in biotechnology · doi:10.1016/j.tibtech.2010.12.008 · Cited by 430
Bioprinting Technology: A Current State-of-the-Art Review
Dababneh, A. B., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028512 · Cited by 427
Scaffolding Biomaterials for 3D Cultivated Meat: Prospects and Challenges
Bomkamp, C., Skaalure, S. C., Fernando, G. F., Arye, T. B., Swartz, E. W., & Specht, E. A. (2021) · Advanced Science · doi:10.1002/advs.202102908 · Cited by 366
Organ printing: from bioprinter to organ biofabrication line
Mironov, V. A., Kasyanov, V. A., & Markwald, R. R. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.02.006 · Cited by 347
Self-citationEngineering cancer microenvironments for in vitro 3-D tumor models
Asghar, W., El Assal, R., Shafiee, H., Pitteri, S., Paulmurugan, R., & Demirci, U. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.002 · Cited by 316
Engineering the multiscale complexity of vascular networks
O’Connor, C., Brady, E., Zheng, Y., Moore, E., & Stevens, K. R. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00447-8 · Cited by 271
3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering
Daly, A. C., Cunniffe, G. M., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600182 · Cited by 272
Challenges on optimization of 3D-printed bone scaffolds
Bahraminasab, M. (2020) · BioMedical Engineering OnLine · doi:10.1186/s12938-020-00810-2 · Cited by 254
3D Bioprinting for Vascularized Tissue Fabrication
Richards, D., Jia, J., Yost, M. J., Markwald, R. R., & Mei, Y. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1653-z · Cited by 245
Self-citationControlled Positioning of Cells in Biomaterials—Approaches Towards 3D Tissue Printing
Wüst, S., Müller, R., & Hofmann, S. (2011) · Journal of Functional Biomaterials · doi:10.3390/jfb2030119 · Cited by 232
Campos, D. F. D., Blaeser, A., Weber, M. H., Jäkel, J., Neuß, S., Jahnen‐Dechent, W., & Fischer, H. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015003 · Cited by 224
Cardiac spheroids as promising in vitro models to study the human heart microenvironment
Polonchuk, L., Chabria, M., Badi, L., Hoflack, J.-C., Figtree, G., Davies, M. J., & Gentile, C. (2017) · Scientific Reports · doi:10.1038/s41598-017-06385-8 · Cited by 223
Self-citationSkin tissue engineering using 3D bioprinting: An evolving research field
Tarassoli, S. P., Jessop, Z. M., Al‐Sabah, A., Gao, N., Whitaker, S., Doak, S. H., & Whitaker, I. S. (2017) · Journal of Plastic Reconstructive & Aesthetic Surgery · doi:10.1016/j.bjps.2017.12.006 · Cited by 209
3D bioprinting for cardiovascular regeneration and pharmacology
Cui, H., Miao, S., Esworthy, T. J., Zhou, X., Lee, S., Liu, C., Yu, Z., Fisher, J. P., Mohiuddin, M. M., & Zhang, L. G. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.014 · Cited by 200
Sequential assembly of cell‐laden hydrogel constructs to engineer vascular‐like microchannels
Du, Y., Ghodousi, M., Qi, H., Haas, N., Xiao, W., & Khademhosseini, A. (2011) · Biotechnology and Bioengineering · doi:10.1002/bit.23102 · Cited by 191
Yeon, J. H., Ryu, H. R., Chung, M., Hu, Q. P., & Jeon, N. L. (2012) · Lab on a Chip · doi:10.1039/c2lc40131b · Cited by 179
Three-dimensional printing of biological matters
Munaz, A., Vadivelu, R. K., John, J. A. S., Barton, M., Kamble, H., & Nguyen, N. (2016) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2016.04.001 · Cited by 182
Engineering more than a cell: vascularization strategies in tissue engineering
Phelps, E. A., & Garcı́a, A. J. (2010) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2010.06.005 · Cited by 178
Liver support strategies: cutting-edge technologies
Struecker, B., Raschzok, N., & Sauer, I. M. (2013) · Nature Reviews Gastroenterology & Hepatology · doi:10.1038/nrgastro.2013.204 · Cited by 168
In situ expansion of engineered human liver tissue in a mouse model of chronic liver disease
Stevens, K. R., Scull, M. A., Ramanan, V., Fortin, C. L., Chaturvedi, R. R., Knouse, K. A., Xiao, J., Fung, C., Mirabella, T., Chen, A. X., et al. (2017) · Science Translational Medicine · doi:10.1126/scitranslmed.aah5505 · Cited by 168
A Plastic Surgery Application in Evolution
Gerstle, T. L., Ibrahim, A. M. S., Kim, P. S.-H., Lee, B. T., & Lin, S. J. (2014) · Plastic & Reconstructive Surgery · doi:10.1097/01.prs.0000436844.92623.d3 · Cited by 166
3D-printed vascular networks direct therapeutic angiogenesis in ischaemia
Mirabella, T., MacArthur, J. W., Cheng, D., Ozaki, C. K., Woo, Y.-P. J., Yang, M. T., & Chen, C. S. (2017) · Nature Biomedical Engineering · doi:10.1038/s41551-017-0083 · Cited by 163
Hydrogels to model 3D in vitro microenvironment of tumor vascularization
Song, H.-H. G., Park, K. M., & Gerecht, S. (2014) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2014.06.002 · Cited by 153
Vascular Tissue Engineering: Challenges and Requirements for an Ideal Large Scale Blood Vessel
Devillard, C. D., & Marquette, C. A. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.721843 · Cited by 152
Holmes, B. B., Bulusu, K. V., Plesniak, M. W., & Zhang, L. G. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/6/064001 · Cited by 150
3D Fabrication of Polymeric Scaffolds for Regenerative Therapy
Ratheesh, G., Venugopal, J. R., Chinnappan, A., Ezhilarasu, H., Sadiq, A., & Ramakrishna, S. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00370 · Cited by 148
3D bioprinting: an emerging technology full of opportunities and challenges
Zhang, B., Luo, Y., Ma, L., Gao, L., Li, Y., Xue, Q., Yang, H., & Cui, Z. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0004-3 · Cited by 141
Bioprinting of a functional vascularized mouse thyroid gland construct
Bulanova, E. A., Koudan, E. V., Degosserie, J., Heymans, C., Pereira, F. D. A. S., Parfenov, V. A., Sun, Y. N., Wang, Q., Akhmedova, S. A., Sviridova, I. K., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7fdd · Cited by 135
Self-citationBiomaterials for Bioprinting Microvasculature
Barrs, R. W., Jia, J., Silver, S. E., Yost, M. J., & Mei, Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00027 · Cited by 134
3D Printing for Tissue Engineering
Richards, D., Tan, Y. J., Jia, J., Yao, H., & Mei, Y. (2013) · Israel Journal of Chemistry · doi:10.1002/ijch.201300086 · Cited by 128
Solid Organ Bioprinting: Strategies to Achieve Organ Function
Jorgensen, A. M., Yoo, J. J., & Atala, A. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00145 · Cited by 125
Shin, J., Lee, Y., Li, Z., Hu, J., Park, S. S., & Kim, K. (2022) · Micromachines · doi:10.3390/mi13030363 · Cited by 112
Spheroids as vascularization units: From angiogenesis research to tissue engineering applications
Laschke, M. W., & Menger, M. D. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2017.07.002 · Cited by 105
Harley, W. S., Li, C. C., Toombs, J. T., O’Connell, C. D., Taylor, H., Heath, D. E., & Collins, D. J. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00147 · Cited by 103
Strategies for organ level tissue engineering
Rustad, K. C., Sorkin, M., Lévi, B., Longaker, M. T., & Gurtner, G. C. (2010) · Organogenesis · doi:10.4161/org.6.3.12139 · Cited by 91
Bioengineering Outlook on Cultivated Meat Production
Pajčin, I., Knežić, T., Azoulay, I. S., Vlajkov, V., Djisalov, M., Janjušević, L., Grahovac, J. A., & Gadjanski, I. (2022) · Micromachines · doi:10.3390/mi13030402 · Cited by 83
Three-dimensional Printing in Developing Countries
Ibrahim, A. M. S., Jose, R. R., Rabie, A. N., Gerstle, T. L., Lee, B. T., & Lin, S. J. (2015) · Plastic & Reconstructive Surgery Global Open · doi:10.1097/gox.0000000000000298 · Cited by 100
Augustine, R., Dan, P., Hasan, A., Khalaf, I., Prasad, P., Ghosal, K., Gentile, C., McClements, L., & Maureira, P. (2021) · Biomedicine & Pharmacotherapy · doi:10.1016/j.biopha.2021.111425 · Cited by 82
Self-citationProspects for 3D bioprinting of organoids
Rawal, P., Tripathi, D. M., Ramakrishna, S., & Kaur, S. (2021) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00124-1 · Cited by 85
Techniques and assays for the study of angiogenesis
Irvin, M., Zijlstra, A., Wikswo, J. P., & Pozzi, A. (2014) · Experimental Biology and Medicine · doi:10.1177/1535370214529386 · Cited by 82
Additive Manufacturing of Vascular Grafts and Vascularized Tissue Constructs
Elomaa, L., & Yang, Y. (2016) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2016.0348 · Cited by 82
The Application of Cell Sheet Engineering in the Vascularization of Tissue Regeneration
Moschouris, K., Firoozi, N., & Kang, Y. (2016) · Regenerative Medicine · doi:10.2217/rme-2016-0059 · Cited by 85
In Situ Organ-Specific Vascularization in Tissue Engineering
Fu, J., & Wang, D. (2018) · Trends in biotechnology · doi:10.1016/j.tibtech.2018.02.012 · Cited by 80
Gurkan, U. A., Fan, Y., Xu, F., Erkmen, B., Urkac, E. S., Parlakgül, G., Bernstein, J., Xing, W., Boyden, E. S., & Demirci, U. (2012) · Advanced Materials · doi:10.1002/adma.201203261 · Cited by 75
A Hybrid Bioprinting Approach for Scale-Up Tissue Fabrication
Yu, Y., Zhang, Y., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028511 · Cited by 76
Achberger, K., Haderspeck, J. C., Kleger, A., & Liebau, S. (2019) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.05.005 · Cited by 75
Hong, S., Song, S.-J., Lee, J. Y., Jang, H., Choi, J., Sun, K., & Park, Y. (2013) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2013.02.011 · Cited by 73
Determinants of Microvascular Network Topologies in Implanted Neovasculatures
Chang, C. C., Krishnan, L., Nunes, S. S., Church, K. H., Edgar, L. T., Boland, E. D., Weiss, J. A., Williams, S. K., & Hoying, J. B. (2011) · Arteriosclerosis Thrombosis and Vascular Biology · doi:10.1161/atvbaha.111.238725 · Cited by 72
Emulating Host-Microbiome Ecosystem of Human Gastrointestinal Tract in Vitro
Park, G.-S., Park, M. H., Shin, W., Zhao, C., Sheikh, S., Oh, S. J., & Kim, H. J. (2017) · Stem Cell Reviews and Reports · doi:10.1007/s12015-017-9739-z · Cited by 71
Three dimensional bioprinting technology: Applications in pharmaceutical and biomedical area
Koçak, E., Yıldız, A., & Acartürk, F. (2020) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2020.111396 · Cited by 69
A Facile Method to Fabricate Hydrogels with Microchannel-Like Porosity for Tissue Engineering
Hammer, J. A., Han, L., Tong, X., & Yang, F. (2013) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2013.0176 · Cited by 60
Bioprinting a Synthetic Smectic Clay for Orthopedic Applications
Afewerki, S., Magalhães, L. S. S. M., Silva, A. D. R., Stocco, T. D., Silva-Filho, E. C., Marciano, F. R., & Lobo, A. O. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900158 · Cited by 61
Bioprinting Cellularized Constructs Using a Tissue-specific Hydrogel Bioink
Skardal, A., Devarasetty, M., Kang, H.-W., Seol, Y.-J., Forsythe, S. D., Bishop, C., Shupe, T., Soker, S., & Atala, A. (2016) · Journal of Visualized Experiments · doi:10.3791/53606 · Cited by 65
Current challenges in three-dimensional bioprinting heart tissues for cardiac surgery
Roche, C. D., Brereton, R. J. L., Ashton, A. W., Jackson, C., & Gentile, C. (2020) · European Journal of Cardio-Thoracic Surgery · doi:10.1093/ejcts/ezaa093 · Cited by 63
Self-citationSynthesis and High-Throughput Processing of Polymeric Hydrogels for 3D Cell Culture
Lowe, S. B., Tan, V. T. G., Soeriyadi, A. H., Davis, T. P., & Gooding, J. J. (2014) · Bioconjugate Chemistry · doi:10.1021/bc500310v · Cited by 60
Bioprinting Technologies and Bioinks for Vascular Model Establishment
Kong, Z., & Wang, X. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24010891 · Cited by 66
Modeling fusion of cellular aggregates in biofabrication using phase field theories
Yang, X., Mironov, V. A., & Wang, Q. (2012) · Journal of Theoretical Biology · doi:10.1016/j.jtbi.2012.03.003 · Cited by 58
Self-citationBioprinting of glioma stem cells improves their endotheliogenic potential
Wang, X., Li, X., Dai, X., Zhang, X., Zhang, J., Xu, T., & Lan, Q. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.08.006 · Cited by 58
Self-citationVeeman, D., Surendar, K. V., Riyaz, M. S. H., & Ravichandran, M. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.12.355 · Cited by 57
Cartilage and bone tissue engineering using adipose stromal/stem cells spheroids as building blocks
Kronemberger, G. S., Matsui, R. A. M., Miranda, G. A. S. C., Granjeiro, J. M., & Baptista, L. S. (2020) · World Journal of Stem Cells · doi:10.4252/wjsc.v12.i2.110 · Cited by 56
Anderson, M., Dubey, N., Bogie, K. M., Chen, C., Li, J., Lerchbacker, J., Mendonça, G., Kauffmann, F., Bottino, M. C., & Kaigler, D. (2022) · Dental Materials · doi:10.1016/j.dental.2021.12.141 · Cited by 54
Advances in Skin Tissue Engineering and Regenerative Medicine
Jorgensen, A. M., Mahajan, N., Atala, A., & Murphy, S. V. (2022) · Journal of Burn Care & Research · doi:10.1093/jbcr/irac126 · Cited by 56
Engineering a vascularized collagen-β-tricalcium phosphate graft using an electrochemical approach
Kang, Y., Mochizuki, N., Khademhosseini, A., Fukuda, J., & Yang, Y. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.035 · Cited by 53
Bioengineered tissue solutions for repair, correction and reconstruction in cardiovascular surgery
Iop, L., Palmosi, T., Sasso, E. D., & Gerosa, G. (2018) · Journal of Thoracic Disease · doi:10.21037/jtd.2018.04.27 · Cited by 51
Fitzsimmons, R., Aquilino, M. S., Quigley, J., Chebotarev, O., Tarlan, F., & Simmons, C. A. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.02.001 · Cited by 50
Bioprinting and Tissue Engineering: Recent Advances and Future Perspectives
Seliktar, D., Dikovsky, D., & Napadensky, E. (2013) · Israel Journal of Chemistry · doi:10.1002/ijch.201300084 · Cited by 50
Photosynthetic Microorganisms for the Oxygenation of Advanced 3D Bioprinted Tissues
Ortega, J. S., Corrales-Orovio, R., Ralph, P., Egaña, J. T., & Gentile, C. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.05.009 · Cited by 47
Self-citation3D biofabrication for soft tissue and cartilage engineering
Turnbull, G. S., Clarke, J., Picard, F., Zhang, W., Riches, P. E., Li, B., & Shu, W. (2020) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2020.06.003 · Cited by 48
Kluger, P. J., Wyrwa, R., Weisser, J., Maierle, J., Votteler, M., Rode, C., Schnabelrauch, M., Walles, H., & Schenke‐Layland, K. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4128-z · Cited by 45
The environmental prospects of cultured meat in China
Zhi-chang, S. U. N., Yu, Q., & Lin, H. A. N. (2015) · Journal of Integrative Agriculture · doi:10.1016/s2095-3119(14)60891-1 · Cited by 47
Hussein, K. H., Park, K.-M., Yu, L., Song, S.-H., Woo, H.-M., & Kwak, H.-H. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.12.029 · Cited by 44
Skardal, A. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.e00026 · Cited by 44
Towards engineering heart tissues from bioprinted cardiac spheroids
Polonchuk, L., Surija, L., Lee, M. H., Sharma, P., Ming, C. L. C., Richter, F., Ben-Sefer, E., Rad, M. A., Sarmast, H. M. S., Shamery, W. A., et al. (2021) · Biofabrication · doi:10.1088/1758-5090/ac14ca · Cited by 46
Self-citationThe fusion of tissue spheroids attached to pre-stretched electrospun polyurethane scaffolds
Beachley, V. Z., Kasyanov, V. A., Mehesz, A. N., Norris, R. A., Ozolanta, I., Kalējs, M., Stradiņš, P., Baptista, L. S., Silva, K. R., Grainjero, J., et al. (2014) · Journal of Tissue Engineering · doi:10.1177/2041731414556561 · Cited by 43
Self-citation5.14 Biofabrication in Tissue Engineering ☆
Woodfield, T. B. F., Lim, K. S., Morouço, P., Levato, R., Malda, J., & Melchels, F. P. W. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10221-8 · Cited by 46
Eltaher, H. M., Abukunna, F. E., Ruiz‐Cantu, L., Stone, Z., Yang, J., & Dixon, J. E. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.06.012 · Cited by 41
Hyaluronan chemistries for three-dimensional matrix applications
Serban, M. A., & Skardal, A. (2018) · Matrix Biology · doi:10.1016/j.matbio.2018.02.010 · Cited by 42
Genome engineering of stem cell organoids for disease modeling
Sun, Y., & Ding, Q. (2017) · Protein & Cell · doi:10.1007/s13238-016-0368-0 · Cited by 39
Immune response against the biomaterials used in 3D bioprinting of organs
Elalouf, A. (2021) · Transplant Immunology · doi:10.1016/j.trim.2021.101446 · Cited by 41
In situ 3D bioprinting: a promising technique in advanced biofabrication strategies
Mahmoudi, Z., Sedighi, M., Jafari, A., Naghieh, S., Stefanek, E., Akbari, M., & Savoji, H. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00260 · Cited by 38
Scalable Biofabrication of Tissue Spheroids for Organ Printing
Rezende, R. A., Pereira, F. D. A. S., Kasyanov, V. A., Kemmoku, D. T., Maia, I. A., da Silva, J. V. L., & Mironov, V. A. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.054 · Cited by 37
Self-citation3D Printing of Organs for Transplantation: Where Are We and Where Are We Heading?
Munoz‐Abraham, A. S., Rodriguez-Davalos, M. I., Bertacco, A., Wengerter, B. C., Geibel, J. P., & Mulligan, D. C. (2016) · Current Transplantation Reports · doi:10.1007/s40472-016-0089-6 · Cited by 39
Metadata
- Authors
- Visconti, R. P., Kasyanov, V., Gentile, C., Zhang, J., Markwald, R. R., & Mironov, V.
- Affiliations
- Medical University of South Carolina (US)
- Riga Stradiņš University (LV)
- Corresponding author
- Mironov, Vladimir
- Venue
- Expert Opinion on Biological Therapy
- Publisher
- Informa Healthcare
- Published
- 2010-02-04
- Volume
- 10
- Issue
- 3
- Pages
- 409-420
- ISSN
- 1471-2598 (ISSN-L)
- 1744-7682
- PMC
- PMC4580374
- OpenAlex
- W2052215721
- Cited by
- 224
- References
- 105
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 5 · 2023: 11 · 2022: 15 · 2021: 19 · 2020: 12 · 2019: 12 · 2018: 20 · 2017: 25 · 2016: 19 · 2015: 15 · 2014: 18 · 2013: 19 · 2012: 12
- FWCI
- 1.34
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Expert Opinion on Biological Therapy (publishedVersion)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- publication.editionName
- Funders
- National Institutes of Health (5p20rr016461-11, 1c06rr015455-01a1, 1c06rr018823-01)
- National Center for Research Resources (RR16434-08, P20RR016434, P20RR021949, 2 P20 RR16461-05A1, C06 RR-015455, C06 RR-018823, P 20 RR-016461)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- organ printing, self-assembly, 3D tissue constructs, organ engineering, microvascular networks
- MeSH terms
- Animals, Blood Vessels, Feasibility Studies, Humans, Robotics, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
