The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Piezoelectric Thin Films for Sensors, Actuators, and Energy Harvesting
Open accessAbstract
Piezoelectric microelectromechanical systems (MEMS) offer the opportunity for high-sensitivity sensors and large displacement, low-voltage actuators. In particular, recent advances in the deposition of perovskite thin films point to a generation of MEMS devices capable of large displacements at complementary metal oxide semiconductor-compatible voltage levels. Moreover, if the devices are mounted in mechanically noisy environments, they also can be used for energy harvesting. Key to all of these applications is the ability to obtain high piezoelectric coefficients and retain these coefficients throughout the microfabrication process. This article will review the impact of composition, orientation, and microstructure on the piezoelectric properties of perovskite thin films such as PbZr 1−xTixO 3(PZT). Superior piezoelectric coefficients (e31, f of −18 C/m 2) are achieved in {001}-oriented PbZr 0.52 Ti 0.48 O 3 films with improved compositional homogeneity on Si substrates. The advent of such high piezoelectric responses in films opens up a wide variety of possible applications. A few examples of these, including low-voltage radio frequency MEMS switches and resonators, actuators for millimeter-scale robotics, droplet ejectors, energy scavengers for unattended sensors, and medical imaging transducers, will be discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
RF MEMS: Theory, Design, and Technology
Rebeiz, G. M. (2003) · Wiley eBooks · doi:10.1002/0471225282 · Cited by 1,827
RF MEMS: Theory, Design, and Technology
Rebeiz, G. M. (2003) · Cited by 1,611
Thin Film Piezoelectrics for MEMS
Trolier-McKinstry, S., & Muralt, P. (2004) · Journal of Electroceramics · doi:10.1023/b:jecr.0000033998.72845.51 · Cited by 1,023
Self-citationMEMS power generator with transverse mode thin film PZT
Jeon, Y. B., Sood, R., Jeong, J.-H., & Kim, S.-G. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.032 · Cited by 795
Piezoelectric Aluminum Nitride Vibrating Contour-Mode MEMS Resonators
Piazza, G., Stephanou, P. J., & Pisano, A. P. (2006) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2006.886012 · Cited by 639
New materials for micro-scale sensors and actuators
Wilson, S. A., Jourdain, R. P. J., Zhang, Q., Dorey, R. A., Bowen, C. R., Willander, M., Wahab, Q. U., Willander, M., Al-hilli, S. M., Nur, O., et al. (2007) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2007.03.001 · Cited by 514
Du, X.-H., Zheng, J., Belegundu, U., & Uchino, K. (1998) · Applied Physics Letters · doi:10.1063/1.121373 · Cited by 441
Ledermann, N., Muralt, P., Baborowski, J., Gentil, S., Mukati, K., Cantoni, M., Seifert, A., & Setter, N. (2003) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(03)00090-6 · Cited by 395
Self-citationEnergy harvesting MEMS device based on thin film piezoelectric cantilevers
Choi, W. J., Jeon, Y., Jeong, J.-H., Sood, R., & Kim, S. G. (2006) · Journal of Electroceramics · doi:10.1007/s10832-006-6287-3 · Cited by 336
Recent Progress in Materials Issues for Piezoelectric MEMS
Muralt, P. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02421.x · Cited by 332
Self-citationPiezoelectric micromachined ultrasonic transducers based on PZT thin films
Muralt, P., Ledermann, N., Paborowski, J., Barzegar, A., Gentil, S., Belgacem, B., Petitgrand, S., Bosseboeuf, A., & Setter, N. (2005) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2005.1563270 · Cited by 332
Self-citationDomain wall contributions to the properties of piezoelectric thin films
Bassiri-Gharb, N., Fujii, I., Hong, E., Trolier-McKinstry, S., Taylor, D. V., & Damjanovic, D. (2007) · Journal of Electroceramics · doi:10.1007/s10832-007-9001-1 · Cited by 301
Self-citationTexture control of PbTiO3 and Pb(Zr,Ti)O3 thin films with TiO2 seeding
Muralt, P., Maeder, T., Sagalowicz, L., Hiboux, S., Scalese, S., Naumovic, D., Agostino, R. G., Xanthopoulos, N., Mathieu, H. J., Patthey, L., et al. (1998) · Journal of Applied Physics · doi:10.1063/1.366614 · Cited by 271
Self-citationSelf-powered autonomous wireless sensor node using vibration energy harvesting
Torah, R., Glynne-Jones, P., Tudor, M., O'Donnell, T., Roy, S., & Beeby, S. (2008) · Measurement Science and Technology · doi:10.1088/0957-0233/19/12/125202 · Cited by 270
Piezoelectric actuation of PZT thin-film diaphragms at static and resonant conditions
Muralt, P., Kholkin, A. L., Köhli, M., & Maeder, T. (1996) · Sensors and Actuators A Physical · doi:10.1016/0924-4247(96)01139-9 · Cited by 212
Self-citationGrowth and properties of gradient free sol-gel lead zirconate titanate thin films
Calame, F., & Muralt, P. (2007) · Applied Physics Letters · doi:10.1063/1.2472529 · Cited by 169
Self-citationPiezoelectric thin films for mems
Muralt, P. (1997) · Integrated Ferroelectrics · doi:10.1080/10584589708013004 · Cited by 165
Self-citationPiezoelectric thin films for MEMS
Kanno, I., Ouyang, J., Akedo, J., Yoshimura, T., Malič, B., & Muralt, P. (2023) · Applied Physics Letters · doi:10.1063/5.0146681 · Cited by 155
Self-citationPerformance limits of the three MEMS inertial energy generator transduction types
Mitcheson, P., Reilly, E. K., Toh, T. T., Wright, P. K., & Yeatman, E. M. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/9/s01 · Cited by 116
Single Process to Deposit Lead Zirconate Titanate (PZT) Thin Film by a Hydrothermal Method
Morita, T., Kanda, T., Yamagata, Y., et al. (1997) · Japanese Journal of Applied Physics · doi:10.1143/jjap.36.2998 · Cited by 93
Cited by
Recent Progress in Multiferroic Magnetoelectric Composites: from Bulk to Thin Films
Ma, J., Hu, J., Li, Z., & Nan, C. (2011) · Advanced Materials · doi:10.1002/adma.201003636 · Cited by 1,878
A review of recent research on mechanics of multifunctional composite materials and structures
Gibson, R. F. (2010) · Composite Structures · doi:10.1016/j.compstruct.2010.05.003 · Cited by 1,141
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“developing lower temperature fabrication methods and alternative substrate materials, and improving texturing of electrodes [63].”
BackgroundAlScN: A III-V semiconductor based ferroelectric
Fichtner, S., Wolff, N., Lofink, F., Kienle, L., & Wagner, B. (2019) · Journal of Applied Physics · doi:10.1063/1.5084945 · Cited by 843
Du, K.-Z., Tu, Q., Zhang, X., Han, Q., Liu, J., Zauscher, S., & Mitzi, D. B. (2017) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.7b01094 · Cited by 587
Metadata
- Authors
- Muralt, P., Polcawich, R. G., & Trolier-McKinstry, S.
- Venue
- MRS Bulletin
- Published
- 2009-09
- Volume
- 34
- Issue
- 9
- Pages
- 658-664
- ISSN
- 0883-7694 (ISSN-L)
- 1938-1425
- OpenAlex
- W2101739496
- Cited by
- 366
- References
- 22
- FWCI
- 6.22
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.