The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks
Abstract
Low-Power and Lossy Networks (LLNs) are a class of network in which both the routers and their interconnect are constrained. LLN routers typically operate with constraints on processing power, memory, and energy (battery power). Their interconnects are characterized by high loss rates, low data rates, and instability. LLNs are comprised of anything from a few dozen to thousands of routers. Supported traffic flows include point-to-point (between devices inside the LLN), point- to-multipoint (from a central control point to a subset of devices inside the LLN), and multipoint-to-point (from devices inside the LLN towards a central control point). This document specifies the IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL), which provides a mechanism whereby multipoint-to-point traffic from devices inside the LLN towards a central control point as well as point-to- multipoint traffic from the central control point to the devices inside the LLN are supported. Support for point-to-point traffic is also available. [STANDARDS-TRACK]
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gnawali, O., Fonseca, R., Jamieson, K., Moss, D., & Levis, P. (2009) · Proceedings of the 7th ACM Conference on Embedded Networked Sensor Systems · doi:10.1145/1644038.1644040 · Cited by 1,404
Self-citationUnderstanding packet delivery performance in dense wireless sensor networks
Zhao, J., & Govindan, R. (2003) · Proceedings of the 1st international conference on Embedded networked sensor systems · doi:10.1145/958491.958493 · Cited by 1,267
Energy Scavenging for Wireless Sensor Nodes with a Focus on Vibration-to-Electricity Conversion
Roundy, S. (2003) · Cited by 466
Routing Metrics Used for Path Calculation in Low-Power and Lossy Networks
Pister, K., Dejean, N., & Barthel, D. (2012) · doi:10.17487/rfc6551 · Cited by 376
Self-citationStatistical Model of Lossy Links in Wireless Sensor Networks
Cerpa, A., Wong, J. L., Kuang, L., Potkonjak, M., & Estrin, D. (2004) · eScholarship (California Digital Library) · Cited by 273
Evaluating the Performance of RPL and 6LoWPAN in TinyOS
Ko, J., Dawson-Haggerty, S., Gnawali, O. D., Culler, D., & Terzis, A. (2011) · Cited by 109
A comparative simulation study of link quality estimators in wireless sensor networks
Baccour, N., Koubâa, A., Jamâa, M. B., Youssef, H., Zúñiga, M. A., & Alves, M. (2009) · Proceedings - International Symposium on Modeling, Analysis, and Simulation of Computer and Telecommunication Systems · doi:10.1109/mascot.2009.5366798 · Cited by 81
Cited by
Internet of Things: A Survey on Enabling Technologies, Protocols, and Applications
Al-Fuqaha, A., Guizani, M., Mohammadi, M., Aledhari, M., & Ayyash, M. (2015) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2444095 · Cited by 8,630
Internet of Things for Smart Cities
Zanella, A., Bui, N., Castellani, A., Vangelista, L., & Zorzi, M. (2014) · IEEE Internet of Things Journal · doi:10.1109/jiot.2014.2306328 · Cited by 6,292
(1996) · Institutional Research Information System University of Turin (University of Turin) · doi:10.1111/j · Cited by 5,486
Lin, J., Yu, W., Zhang, N., Yang, X., Zhang, H., & Zhao, W. (2017) · IEEE Internet of Things Journal · doi:10.1109/jiot.2017.2683200 · Cited by 2,793
IoT security: Review, blockchain solutions, and open challenges
Khan, M. A., & Salah, K. (2018) · Future Generation Computer Systems · doi:10.1016/j.future.2017.11.022 · Cited by 2,488
Metadata
- Authors
- Brandt, A., Hui, J., Kelsey, R., Levis, P., Pister, K., Struik, R., Vasseur, J., & Alexander, R.
- Publisher
- RFC Editor
- Published
- 2012-03
- OpenAlex
- W2325877089
- Cited by
- 2,662
- References
- 7
- Type
- report
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.