The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Strategic Issues in Product Recovery Management
Open accessAbstract
This article examines strategic production and operations management issues in product recovery management (PRM). PRM encompasses the management of all used and discarded products, components, and materials for which a manufacturing company is legally, contractually, or otherwise responsible. The objective of PRM is to recover as much of the economic (and ecological) value of used and discarded products, components, and materials as reasonably possible, thereby reducing the ultimate quantities of waste to a minimum. This article also discusses the relevance of PRM to durable products manufacturers. It contains a categorization of PRM decisions. A case study based on the PRM system of a multinational copier manufacturer is presented to illustrate a set of specific production and operations management issues. The experiences of two other pro-active manufacturers (BMW and IBM) are also discussed
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Successful recycling through value-chain collaboration
Roy, R., & Whelan, R. C. (1992) · Long Range Planning · doi:10.1016/0024-6301(92)90009-q · Cited by 85
Cited by
Green supply-chain management: a state-of-the-art literature review
Srivastava, S. K. (2007) · International Journal of Management Reviews · doi:10.1111/j.1468-2370.2007.00202.x · Cited by 3,984
Quantitative models for reverse logistics: A review
Fleischmann, M., Bloemhof-Ruwaard, J. M., Dekker, R., van der Laan, E., van Nunen, J. A. E. E., & Van Wassenhove, L. N. (1997) · European Journal of Operational Research · doi:10.1016/s0377-2217(97)00230-0 · Cited by 1,902
Self-citationReike, D., Vermeulen, W. J. V., & Witjes, S. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.08.027 · Cited by 1,886
Sustainable supply chains: An introduction
Linton, J. D., Klassen, R., & Jayaraman, V. (2007) · Journal of Operations Management · doi:10.1016/j.jom.2007.01.012 · Cited by 1,746
Product Development Decisions: A Review of the Literature
Krishnan, V., & Ulrich, K. T. (2001) · Management Science · doi:10.1287/mnsc.47.1.1.10668 · Cited by 1,701
Genovese, A., Acquaye, A. A., Figueroa, A., & Koh, S. C. L. (2017) · Omega · doi:10.1016/j.omega.2015.05.015 · Cited by 1,502
Internet of things and supply chain management: A literature review
Ben-Daya, M., Hassini, E., & Bahroun, Z. (2019) · International Journal of Production Research · doi:10.1080/00207543.2017.1402140 · Cited by 1,501
OR FORUM—The Evolution of Closed-Loop Supply Chain Research
Guide, V. D. R., & Van Wassenhove, L. N. (2009) · Operations Research · doi:10.1287/opre.1080.0628 · Cited by 1,408
Self-citationDesigning the green supply chain
Beamon, B. M. (1999) · Logistics Information Management · doi:10.1108/09576059910284159 · Cited by 1,160
Issues in environmentally conscious manufacturing and product recovery: a survey
Gungor, A., & Gupta, S. M. (1999) · Computers & Industrial Engineering · doi:10.1016/s0360-8352(99)00167-9 · Cited by 1,107
Production planning and control for remanufacturing: industry practice and research needs
Guide, V. D. R. (2000) · Journal of Operations Management · doi:10.1016/s0272-6963(00)00034-6 · Cited by 1,098
AN EXAMINATION OF REVERSE LOGISTICS PRACTICES
Rogers, D. S., & Tibben‐Lembke, R. (2001) · Journal of Business Logistics · doi:10.1002/j.2158-1592.2001.tb00007.x · Cited by 953
Remanufacturing as a Marketing Strategy
Atasu, A., Sarvary, M., & Van Wassenhove, L. N. (2008) · Management Science · doi:10.1287/mnsc.1080.0893 · Cited by 951
Self-citationAnalysis of interactions among the barriers of reverse logistics
Ravi, V., & Shankar, R. (2005) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2004.07.002 · Cited by 902
THE IMPACT OF PRODUCT RECOVERY ON LOGISTICS NETWORK DESIGN
FLEISCHMANN, M., BEULLENS, P., BLOEMHOF‐RUWAARD, J. M., & VANWASSENHOVE, L. N. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00076.x · Cited by 833
Self-citationA characterisation of logistics networks for product recovery
Fleischmann, M., Krikke, H. R., Dekker, R., & Flapper, S. D. P. (2000) · Omega · doi:10.1016/s0305-0483(00)00022-0 · Cited by 786
Using fuzzy DEMATEL to evaluate the green supply chain management practices
Lin, R.-J. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.06.010 · Cited by 735
Developing a Theory of Reverse Logistics
Dowlatshahi, S. (2000) · Interfaces · doi:10.1287/inte.30.3.143.11670 · Cited by 721
MANAGING PRODUCT RETURNS FOR REMANUFACTURING
GUIDE, V. D. R., & VANWASSENHOVE, L. N. (2001) · Production and Operations Management · doi:10.1111/j.1937-5956.2001.tb00075.x · Cited by 708
Self-citationSupply chain management and the circular economy: towards the circular supply chain
De Angelis, R., Howard, M., & Miemczyk, J. (2018) · Production Planning & Control · doi:10.1080/09537287.2018.1449244 · Cited by 692
Market Segmentation and Product Technology Selection for Remanufacturable Products
Debo, L. G., Toktay, L. B., & Van Wassenhove, L. N. (2005) · Management Science · doi:10.1287/mnsc.1050.0369 · Cited by 691
Self-citationGreen supply chain management implications for “closing the loop”
Zhu, Q., Sarkis, J., & Lai, K.-H. (2008) · Transportation Research Part E: Logistics and Transportation Review · doi:10.1016/j.tre.2006.06.003 · Cited by 665
Network design for reverse logistics☆
SRIVASTAVA, S. (2008) · Omega · doi:10.1016/j.omega.2006.11.012 · Cited by 623
A literature review and perspectives in reverse logistics
Agrawal, S., Singh, R. K., & Murtaza, Q. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2015.02.009 · Cited by 605
Extending the Horizons: Environmental Excellence as Key to Improving Operations
Corbett, C. J., & Klassen, R. D. (2006) · Manufacturing & Service Operations Management · doi:10.1287/msom.1060.0095 · Cited by 588
Integrating environmental management and supply chain strategies
Handfield, R., Sroufe, R., & Walton, S. (2005) · Business Strategy and the Environment · doi:10.1002/bse.422 · Cited by 545
Pilkington, A., & Meredith, J. (2009) · Journal of Operations Management · doi:10.1016/j.jom.2008.08.001 · Cited by 537
A closed-loop logistics model for remanufacturing
Jayaraman, V, Guide, V. D. R., & Srivastava, R. (1999) · Journal of the Operational Research Society · doi:10.1057/palgrave.jors.2600716 · Cited by 537
Angell, L. C., & Klassen, R. D. (1999) · Journal of Operations Management · doi:10.1016/s0272-6963(99)00006-6 · Cited by 535
Matching Demand and Supply to Maximize Profits from Remanufacturing
Guide, V. D. R., Teunter, R. H., & Van Wassenhove, L. N. (2003) · Manufacturing & Service Operations Management · doi:10.1287/msom.5.4.303.24883 · Cited by 525
Self-citationHandbook of Management Accounting Research
(2009) · Handbooks of Management Accounting Research · doi:10.1016/s1751-3243(07)x0001-4 · Cited by 508
Ravi, V., Shankar, R., & Tiwari, M. K. (2005) · Computers & Industrial Engineering · doi:10.1016/j.cie.2005.01.017 · Cited by 474
Designing and evaluating sustainable logistics networks
Frota Neto, J. Q., Bloemhof-Ruwaard, J. M., van Nunen, J. A. E. E., & van Heck, E. (2008) · International Journal of Production Economics · doi:10.1016/j.ijpe.2006.10.014 · Cited by 451
Self-citationA two-level network for recycling sand: A case study
Barros, A. I., Dekker, R., & Scholten, V. (1998) · European Journal of Operational Research · doi:10.1016/s0377-2217(98)00093-9 · Cited by 447
Inventory Management of Remanufacturable Products
Toktay, L. B., Wein, L. M., & Zenios, S. A. (2000) · Management Science · doi:10.1287/mnsc.46.11.1412.12082 · Cited by 434
Channel leadership, performance and coordination in closed loop supply chains
Choi, T.-M., Li, Y., & Xu, L. (2013) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.08.002 · Cited by 434
Building contingency planning for closed‐loop supply chains with product recovery
Guide, V. D. R., Jayaraman, V., & Linton, J. D. (2003) · Journal of Operations Management · doi:10.1016/s0272-6963(02)00110-9 · Cited by 425
Empirical research opportunities in reverse supply chains
Prahinski, C., & Kocabasoglu, C. (2006) · Omega · doi:10.1016/j.omega.2005.01.003 · Cited by 425
Mitra, S., & Datta, P. P. (2014) · International Journal of Production Research · doi:10.1080/00207543.2013.849014 · Cited by 414
Supply-Chain Management for Recoverable Manufacturing Systems
Guide, V. D. R., Jayaraman, V., Srivastava, R., & Benton, W. C. (2000) · Interfaces · doi:10.1287/inte.30.3.125.11656 · Cited by 414
Differences between forward and reverse logistics in a retail environment
Tibben‐Lembke, R. S., & Rogers, D. S. (2002) · Supply Chain Management: An International Journal · doi:10.1108/13598540210447719 · Cited by 408
A Framework for Reverse Logistics
de Brito, M. P., & Dekker, R. (2004) · Reverse Logistics · doi:10.1007/978-3-540-24803-3_1 · Cited by 406
Concurrent product and closed-loop supply chain design with an application to refrigerators
Krikke, H., Bloemhof-Ruwaard, J., & Van Wassenhove, L. N. (2003) · International Journal of Production Research · doi:10.1080/0020754031000120087 · Cited by 392
Self-citationPrakash, C., & Barua, M. K. (2015) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2015.03.001 · Cited by 384
Resource duration as a managerial indicator for Circular Economy performance
Franklin-Johnson, E., Figge, F., & Canning, L. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.05.023 · Cited by 377
Remanufacturing: The next great opportunity for boosting US productivity
Giutini, R., & Gaudette, K. (2003) · Business Horizons · doi:10.1016/s0007-6813(03)00087-9 · Cited by 367
Importance of closed-loop supply chain relationships for product remanufacturing
Östlin, J., Sundin, E., & Björkman, M. (2008) · International Journal of Production Economics · doi:10.1016/j.ijpe.2008.02.020 · Cited by 363
Exploring barriers to implementing different circular business models
Vermunt, D. A., Negro, S. O., Verweij, P. A., Kuppens, D. V., & Hekkert, M. P. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.052 · Cited by 358
Remanufactured Products in Closed‐Loop Supply Chains for Consumer Goods
Abbey, J. D., Meloy, M. G., Guide, V. D. R., & Atalay, S. (2015) · Production and Operations Management · doi:10.1111/poms.12238 · Cited by 346
Sustainability and business-to-business marketing: A framework and implications
Sharma, A., Iyer, G. R., Mehrotra, A., & Krishnan, R. (2010) · Industrial Marketing Management · doi:10.1016/j.indmarman.2008.11.005 · Cited by 344
Inventory Control in Hybrid Systems with Remanufacturing
van der Laan, E., Salomon, M., Dekker, R., & Van Wassenhove, L. (1999) · Management Science · doi:10.1287/mnsc.45.5.733 · Cited by 342
Self-citationGreen consumer behaviour: an experimental analysis of willingness to pay for remanufactured products
Michaud, C., & Llerena, D. (2011) · Business Strategy and the Environment · doi:10.1002/bse.703 · Cited by 338
Blomsma, F., Pieroni, M., Kravchenko, M., Pigosso, D. C. A., Hildenbrand, J., Kristinsdottir, A. R., Kristoffersen, E., Shahbazi, S., Nielsen, K. D., Jönbrink, A.-K., et al. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118271 · Cited by 336
Product life-cycle implications for remanufacturing strategies
Östlin, J., Sundin, E., & Björkman, M. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.02.021 · Cited by 329
Production planning and inventory control with remanufacturing and disposal
van der Laan, E., & Salomon, M. (1997) · European Journal of Operational Research · doi:10.1016/s0377-2217(97)00108-2 · Cited by 304
Self-citationKanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.01.034 · Cited by 300
Environmental performance as an operations objective
de Burgos Jiménez, J., & Céspedes Lorente, J. J. (2001) · International Journal of Operations & Production Management · doi:10.1108/01443570110410900 · Cited by 282
Supply Loops and Their Constraints: The Industrial Ecology of Recycling and Reuse
Geyer, R., & Jackson, T. (2004) · California Management Review · doi:10.2307/41166210 · Cited by 281
Enabling the Circular Economy transition: a sustainable lean manufacturing recipe for Industry 4.0
Ciliberto, C., Szopik‐Depczyńska, K., Tarczyńska‐Łuniewska, M., Ruggieri, A., & Ioppolo, G. (2021) · Business Strategy and the Environment · doi:10.1002/bse.2801 · Cited by 278
Supply chain management for circular economy: conceptual framework and research agenda
Hazen, B. T., Russo, I., Confente, I., & Pellathy, D. (2021) · The International Journal of Logistics Management · doi:10.1108/ijlm-12-2019-0332 · Cited by 277
Liu, H., Lei, M., Deng, H., Keong Leong, G., & Huang, T. (2016) · Omega · doi:10.1016/j.omega.2015.07.002 · Cited by 273
Reverse logistics in the electronic industry of China: a case study
Hung Lau, K., & Wang, Y. (2009) · Supply Chain Management: An International Journal · doi:10.1108/13598540910995228 · Cited by 267
Wang, Y., Wiegerinck, V., Krikke, H., & Zhang, H. (2013) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/ijpdlm-01-2013-0011 · Cited by 254
Supply Chain Coordination for False Failure Returns
Ferguson, M., Guide, V. D. R., & Souza, G. C. (2006) · Manufacturing & Service Operations Management · doi:10.1287/msom.1060.0112 · Cited by 252
Morioka, S. N., & Carvalho, M. M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.103 · Cited by 138
Consumers' reactions to product obsolescence in emerging markets: the case of Brazil
Echegaray, F. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.08.119 · Cited by 131
Circular value creation architectures: Make, ally, buy, or laissez‐faire
Hansen, E. G., & Revellio, F. (2020) · Journal of Industrial Ecology · doi:10.1111/jiec.13016 · Cited by 92
Marcos, J. T., Scheller, C., Godina, R., Spengler, T. S., & Carvalho, H. (2021) · Cleaner Logistics and Supply Chain · doi:10.1016/j.clscn.2021.100006 · Cited by 70
Kumar, A. (2017) · Asia Pacific Journal of Marketing and Logistics · doi:10.1108/apjml-09-2016-0159 · Cited by 62
Kim, S., & Moon, S. K. (2020) · Applied Sciences · doi:10.3390/app10031100 · Cited by 53
Circular value chain blind spot – A scoping review of the 9R framework in consumption
Hunger, T., Arnold, M., & Ulber, M. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.140853 · Cited by 42
Metadata
- Authors
- Thierry, M., Salomon, M., Van Nunen, J., & Van Wassenhove, L.
- Venue
- California Management Review
- Publisher
- SAGE Publications
- Published
- 1995-01
- Volume
- 37
- Issue
- 2
- Pages
- 114-136
- ISSN
- 0008-1256 (ISSN-L)
- 2162-8564
- OpenAlex
- W1981990922
- Cited by
- 1,437
- References
- 1
- FWCI
- 46.65
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.