The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
Bioerodable PLGA-Based Microparticles for Producing Sustained-Release Drug Formulations and Strategies for Improving Drug Loading
Open accessAbstract
Poly(lactic-co-glycolic acid) (PLGA) is the most widely used biomaterial for microencapsulation and prolonged delivery of therapeutic drugs, proteins and antigens. PLGA has excellent biodegradability and biocompatibility and is generally recognized as safe by international regulatory agencies including the United States Food and Drug Administration and the European Medicines Agency. The physicochemical properties of PLGA may be varied systematically by changing the ratio of lactic acid to glycolic acid. This in turn alters the release rate of microencapsulated therapeutic molecules from PLGA microparticle formulations. The obstacles hindering more widespread use of PLGA for producing sustained-release formulations for clinical use include low drug loading, particularly of hydrophilic small molecules, high initial burst release and/or poor formulation stability. In this review, we address strategies aimed at overcoming these challenges. These include use of low-temperature double-emulsion methods to increase drug-loading by producing PLGA particles with a small volume for the inner water phase and a suitable pH of the external phase. Newer strategies for producing PLGA particles with high drug loading and the desired sustained-release profiles include fabrication of multi-layered microparticles, nanoparticles-in-microparticles, use of hydrogel templates, as well as coaxial electrospray, microfluidics, and supercritical carbon dioxide methods. Another recent strategy with promise for producing particles with well-controlled and reproducible sustained-release profiles involves complexation of PLGA with additives such as polyethylene glycol, poly(ortho esters), chitosan, alginate, caffeic acid, hyaluronic acid, and silicon dioxide.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier
Makadia, H. K., & Siegel, S. J. (2011) · Polymers · doi:10.3390/polym3031377 · Cited by 4,816 · cited 5×
“These properties not only affect the ability of the biopolymer to be formulated but also influence its degradation rate (Table 1; Makadia and Siegel, 2011).”
BackgroundMethodInfluentialPLGA-based nanoparticles: An overview of biomedical applications
Danhier, F., Ansorena, E., Silva, J. M., Coco, R., Le Breton, A., & Préat, V. (2012) · Journal of Controlled Release · doi:10.1016/j.jconrel.2012.01.043 · Cited by 3,806
Kamaly, N., Yameen, B., Wu, J., & Farokhzad, O. C. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00346 · Cited by 3,070
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00048-3 · Cited by 2,617
(2016) · CRC Press eBooks · doi:10.1201/b12801 · Cited by 2,031
Control and detection of chemical reactions in microfluidic systems
deMello, A. J. (2006) · Nature · doi:10.1038/nature05062 · Cited by 1,495
Polymer microspheres for controlled drug release
Freiberg, S., & Zhu, X. X. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2004.04.013 · Cited by 1,336
The mechanisms of drug release in poly(lactic-co-glycolic acid)-based drug delivery systems—A review
Fredenberg, S., Wahlgren, M., Reslow, M., & Axelsson, A. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.05.049 · Cited by 1,286
Govender, T. (1999) · Journal of Controlled Release · doi:10.1016/s0168-3659(98)00116-3 · Cited by 1,008
Advanced materials and processing for drug delivery: The past and the future
Zhang, Y., Chan, H. F., & Leong, K. W. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.10.003 · Cited by 1,000
Freitas, S., Merkle, H. P., & Gander, B. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.10.015 · Cited by 923
Controlled Delivery Systems for Proteins Based on Poly(Lactic/Glycolic Acid) Microspheres
Cohen, S., Yoshioka, T., Lucarelli, M., Hwang, L. H., & Langer, R. (1991) · Pharmaceutical Research · doi:10.1023/a:1015841715384 · Cited by 843
Nie, Z., Li, W., Seo, M., Xu, S., & Kumacheva, E. (2006) · Journal of the American Chemical Society · doi:10.1021/ja060882n · Cited by 689
Sosnik, A., & Seremeta, K. P. (2015) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2015.05.003 · Cited by 671
PLGA: a Unique Polymer for Drug Delivery
Kapoor, D. N., Bhatia, A., Kaur, R., Sharma, R., Kaur, G., & Dhawan, S. (2015) · Therapeutic Delivery · doi:10.4155/tde.14.91 · Cited by 609
Xu, Q., Hashimoto, M., Dang, T. T., Hoare, T., Kohane, D. S., Whitesides, G. M., Langer, R., & Anderson, D. G. (2009) · Small · doi:10.1002/smll.200801855 · Cited by 602
Microspheres for controlled release drug delivery
Varde, N. K., & Pack, D. W. (2004) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.4.1.35 · Cited by 448
Dunne, M., Corrigan, O. I., & Ramtoola, Z. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00040-5 · Cited by 444
Self-healing and self-mendable polymers
Syrett, J. A., Becer, C. R., & Haddleton, D. M. (2010) · Polymer Chemistry · doi:10.1039/c0py00104j · Cited by 411
How porosity and size affect the drug release mechanisms from PLGA-based microparticles
Klose, D., Siepmann, F., Elkharraz, K., Krenzlin, S., & Siepmann, J. (2006) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2005.07.031 · Cited by 358
Wang, J., Wang, B. M., & Schwendeman, S. P. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00137-2 · Cited by 343
Bodmeier, R., & McGinity, J. W. (1988) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(88)90073-7 · Cited by 330
Yang, Y.-Y., Chia, H.-H., & Chung, T.-S. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(00)00291-1 · Cited by 292
MAO, S., XU, J., CAI, C., GERMERSHAUS, O., SCHAPER, A., & KISSEL, T. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2006.10.036 · Cited by 283
Effect of the size of biodegradable microparticles on drug release: experiment and theory
Siepmann, J., Faisant, N., Akiki, J., Richard, J., & Benoit, J. P. (2004) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.01.011 · Cited by 272
PLGA-based drug delivery systems: Importance of the type of drug and device geometry
Klose, D., Siepmann, F., Elkharraz, K., & Siepmann, J. (2008) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2007.10.030 · Cited by 267
Drug loading of polymer implants by supercritical CO 2 assisted impregnation: A review
Champeau, M., Thomassin, J.-M., Tassaing, T., & Jérôme, C. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.05.002 · Cited by 254
Microfluidics for advanced drug delivery systems
Riahi, R., Tamayol, A., Shaegh, S. A. M., Ghaemmaghami, A. M., Dokmeci, M. R., & Khademhosseini, A. (2015) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2014.12.001 · Cited by 254
Poly (glycolic acid-co-dl-lactic acid): diffusion or degradation controlled drug delivery?
Shah, S. S., Cha, Y., & Pitt, C. G. (1992) · Journal of Controlled Release · doi:10.1016/0168-3659(92)90171-m · Cited by 250
Kim, H. K., Chung, H. J., & Park, T. G. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2006.02.004 · Cited by 246
Wang, H., Agarwal, P., Zhao, S., Xu, R. X., Yu, J., Lu, X., & He, X. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.048 · Cited by 218
Effect of drug type on the degradation rate of PLGA matrices
SIEGEL, S., KAHN, J., METZGER, K., WINEY, K., WERNER, K., & DAN, N. (2006) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2006.06.009 · Cited by 208
Howdle, S. M., Watson, M. S., Whitaker, M. J., Davies, M. C., Shakesheff, K. M., Popov, V. K., Mandel, F. S., & Wang, J. D. (2001) · Chemical Communications · doi:10.1039/b008188o · Cited by 206
Coaxial electrospray of microparticles and nanoparticles for biomedical applications
Zhang, L., Huang, J., Si, T., & Xu, R. X. (2012) · Expert Review of Medical Devices · doi:10.1586/erd.12.58 · Cited by 205
Effect of the size of biodegradable microparticles on drug release: experiment and theory
Siepmann, J. (2004) · Journal of Controlled Release · doi:10.1016/j.conrel.2004.01.011 · Cited by 203
Prolonged Regional Nerve Blockade: Injectable Biodegradable Bupivacaine/Polyester Microspheres
Curley, J., Castillo, J., Hotz, J., Uezono, M., Hernandez, S., Lim, J.-O., Tigner, J., Chasin, M., Langer, R., & Berde, C. (1996) · Anesthesiology · doi:10.1097/00000542-199606000-00017 · Cited by 182
Hung, L.-H., Teh, S.-Y., Jester, J., & Lee, A. P. (2010) · Lab on a Chip · doi:10.1039/c002866e · Cited by 171
One-Step Fabrication of Polymeric Janus Nanoparticles for Drug Delivery
Xie, H., She, Z.-G., Wang, S., Sharma, G., & Smith, J. W. (2012) · Langmuir · doi:10.1021/la2042185 · Cited by 160
Budiša, N., & Schulze‐Makuch, D. (2014) · Life · doi:10.3390/life4030331 · Cited by 151
The hydrogel template method for fabrication of homogeneous nano/microparticles
Acharya, G. S., Shin, C. S., McDermott, M. D., Mishra, H., Park, H., Kwon, I. C., & Park, K. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.09.032 · Cited by 143
Physical properties of PLGA films during polymer degradation
Houchin, M. L., & Topp, E. M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30813 · Cited by 133
Leo, E., Brina, B., Forni, F., & Vandelli, M. A. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2004.03.002 · Cited by 111
Design of PLGA-based depot delivery systems for biopharmaceuticals prepared by spray drying
Wan, F., & Yang, M. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.12.025 · Cited by 111
A study of drug release from homogeneous PLGA microstructures
Acharya, G. S., Shin, C. S., Vedantham, K., McDermott, M. D., Rish, T., Hansen, K. S., Fu, Y., & Park, K. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.03.024 · Cited by 103
Size effect of PLGA spheres on drug loading efficiency and release profiles
Dawes, G. J. S., Fratila-Apachitei, L. E., Mulia, K., Apachitei, I., Witkamp, G., & Duszczyk, J. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3666-0 · Cited by 98
Shi, M., Yang, Y. Y., Chaw, C. S., Goh, S.-H., Moochhala, S., Ng, S., & Heller, J. (2003) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00493-5 · Cited by 94
Multidrug encapsulation by coaxial tri-capillary electrospray
Lee, Y., Bai, M., & Chen, D. (2010) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2010.08.022 · Cited by 90
Coaxial Electrospray of Curcumin-Loaded Microparticles for Sustained Drug Release
Yuan, S., Lei, F., Liu, Z., Tong, Q., Si, T., & Xu, R. X. (2015) · PLoS ONE · doi:10.1371/journal.pone.0132609 · Cited by 89
Liggins, R., Cruz, T. F., Min, W., Liang, L. S., Hunter, W. L., & Burt, H. M. (2004) · Inflammation Research · doi:10.1007/s00011-004-1273-1 · Cited by 88
Koushik, K., & Kompella, U. B. (2004) · Pharmaceutical Research · doi:10.1023/b:pham.0000019308.25479.a4 · Cited by 86
Advances in Nuclear Oncology: Microspheres for Internal Radionuclide Therapy of Liver Tumours
Nijsen, J. F. W., Schip, A. D. V. H., Hennink, W. E., Rook, D., van Rijk, P. P., & de Klerk, J. M. H. (2002) · Current Medicinal Chemistry · doi:10.2174/0929867023371454 · Cited by 85
Jordan, F., Naylor, A., Kelly, C. A., Howdle, S. M., Lewis, A., & Illum, L. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.09.013 · Cited by 84
Preparation and characterization of cephalexin loaded PLGA microspheres
Chaisri, W., Hennink, W., & Okonogi, S. (2009) · Current Drug Delivery · doi:10.2174/156720109787048186 · Cited by 77
Sanna, V., Roggio, A. M., Pala, N., Marceddu, S., Lubinu, G., Mariani, A., & Sechi, M. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.08.053 · Cited by 76
Production of nanoparticles-in-microparticles by a double emulsion method: A comprehensive study
Lee, Y.-S., Johnson, P. J., Robbins, P. T., & Bridson, R. H. (2012) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2012.10.016 · Cited by 68
Draheim, C., de Crécy, F., Hansen, S., Collnot, E.-M., & Lehr, C. (2015) · Pharmaceutical Research · doi:10.1007/s11095-015-1647-9 · Cited by 66
Wang, Z. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2009.03.015 · Cited by 65
Microparticles produced by the hydrogel template method for sustained drug delivery
Lü, Y., Sturek, M. S., & Park, K. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.058 · Cited by 65
Lim, M. P. A., Lee, W., Widjaja, E., & Loo, S. C. J. (2013) · Biomaterials Science · doi:10.1039/c3bm00175j · Cited by 61
Biodegradable Microcapsules Prepared by Self-Healing of Porous Microspheres
Na, X., Gao, F., Zhang, L.-Y., Su, Z. G., & Ma, G. (2012) · ACS Macro Letters · doi:10.1021/mz200222d · Cited by 59
Feng, S., Zeng, W., Lim, Y. T., Zhao, L., Win, K. Y., Oakley, R., Teoh, S. H., Lee, R. C. H., & Pan, S. (2007) · Nanomedicine · doi:10.2217/17435889.2.3.333 · Cited by 58
Dhanda, D. S., Tyagi, P., Mirvish, S. S., & Kompella, U. B. (2013) · Journal of Controlled Release · doi:10.1016/j.jconrel.2013.03.027 · Cited by 56
Graves, R. A., Pamujula, S., Moiseyev, R., Freeman, T., Bostanian, L. A., & Mandal, T. K. (2003) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2003.10.019 · Cited by 54
Cai, C., Mao, S., Germershaus, O., Schaper, A., Rytting, E., Chen, D., & Kissel, T. (2008) · Journal of Microencapsulation · doi:10.1080/02652040802354707 · Cited by 46
Solvent Evaporation Techniques as Promising Advancement in Microencapsulation
Hwisa, N. T., Katakam, P., Chandu, B. R., & Adiki, S. K. (2013) · Vedic Research International Biological Medicinal Chemistry · doi:10.14259/bmc.v1i1.29 · Cited by 44
Falco, N., Reverchon, E., & Porta, G. D. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300482n · Cited by 43
Porous silicon oxide–PLGA composite microspheres for sustained ocular delivery of daunorubicin
Nan, K., Ma, F., Hou, H., Freeman, W. R., Sailor, M. J., & Cheng, L. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.04.024 · Cited by 40
Abulateefeh, S. R., & Alkilany, A. M. (2015) · AAPS PharmSciTech · doi:10.1208/s12249-015-0413-y · Cited by 39
Cho, D., & Yoo, H. J. (2014) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2014.2368071 · Cited by 37
Microfluidic Fabrication of Multi‐Drug‐Loaded Polymeric Microparticles for Topical Glaucoma Therapy
Leon, R. A. L., Somasundar, A., Badruddoza, A. Z. M., & Khan, S. A. (2014) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201400229 · Cited by 34
A one-step modified method to reduce the burst initial release from PLGA microspheres
Zheng, C., & Liang, W. (2010) · Drug Delivery · doi:10.3109/10717540903509001 · Cited by 32
Immobilization of Semisoft Colloidal Crystals Formed by Polymer-Brush-Afforded Hybrid Particles
Huang, Y., Morinaga, T., Tai, Y., Tsujii, Y., & Ohno, K. (2014) · Langmuir · doi:10.1021/la5011488 · Cited by 30
Han, F. Y., Thurecht, K. J., Lam, A.-L., Whittaker, A. K., & Smith, M. T. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24497 · Cited by 27
Self-citationSingle shot tetanus vaccine manufactured by a supercritical fluid encapsulation technology
Baxendale, A., van Hooff, P., Durrant, L., Spendlove, I., Howdle, S. M., Woods, H. M., Whitaker, M. J., Davies, O. R., Naylor, A., Lewis, A. L., et al. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.04.053 · Cited by 27
PLGA particle production for water-soluble drug encapsulation: Degradation and release behaviour
Gasparini, G., Holdich, R. G., & Kosvintsev, S. R. (2009) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2009.09.035 · Cited by 25
Park, K., Sung, H. S., Choi, S. J., Choi, Y. J., & Chang, P. (2014) · Food Chemistry · doi:10.1016/j.foodchem.2014.03.125 · Cited by 23
Hydrolytic Degradation Behavior of 50/50 Poly Lactide-co-Glycolide from Drug Eluting Stents
Parikh, J. K., & Raval, A. (2011) · Cited by 20
Navaei, A., Rasoolian, M., Momeni, A., Emami, S. H., & Rafienia, M. (2013) · Drug Development and Industrial Pharmacy · doi:10.3109/03639045.2013.777734 · Cited by 19
Nafissi‐Varcheh, N., Luginbuehl, V., Aboofazeli, R., & Merkle, H. P. (2011) · Europe PMC (PubMed Central) · Cited by 15
Feng, S., Lu, F. J., Wang, Y., & Suo, J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41943 · Cited by 9
Caffeic Acid-PLGA Conjugate to Design Protein Drug Delivery Systems Stable to Irradiation
Selmin, F., Puoci, F., Parisi, O. I., Franzè, S., Musazzi, U. M., & Cilurzo, F. (2015) · Journal of Functional Biomaterials · doi:10.3390/jfb6010001 · Cited by 8
Cited by
Zero-order drug delivery: State of the art and future prospects
Laracuente, M.-L., Yu, M. H., & McHugh, K. J. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.09.020 · Cited by 384
Customizing poly(lactic-co-glycolic acid) particles for biomedical applications
Swider, E., Koshkina, O., Tel, J., Cruz, L. J., de Vries, I. J. M., & Srinivas, M. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.04.006 · Cited by 328
PLGA-based nanomedicines manufacturing: Technologies overview and challenges in industrial scale-up
Operti, M. C., Bernhardt, A., Grimm, S., Engel, A., Figdor, C. G., & Tagit, O. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120807 · Cited by 302
Recent advances in the formulation of PLGA microparticles for controlled drug delivery
Lagreca, E., Onesto, V., Di Natale, C., La Manna, S., Netti, P. A., & Vecchione, R. (2020) · Progress in Biomaterials · doi:10.1007/s40204-020-00139-y · Cited by 284
Vlachopoulos, A., Karlioti, G., Balla, E., Daniilidis, V., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Christodoulou, E., Koumentakou, I., Karavas, E., et al. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14020359 · Cited by 277
Metadata
- Authors
- Han, F. Y., Thurecht, K. J., Whittaker, A. K., & Smith, M. T.
- Venue
- Frontiers in Pharmacology
- Publisher
- Frontiers Media SA
- Published
- 2016-06-28
- Volume
- 7
- Pages
- 185-185
- ISSN
- 1663-9812 (ISSN-L)
- OpenAlex
- W2461909646
- Cited by
- 358
- References
- 81
- FWCI
- 13.22
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.