The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Towards Controlled Degradation of Poly(lactic) Acid in Technical Applications
Open accessAbstract
Environmental issues urge for the substitution of petrochemical-based raw materials with more environmentally friendly sources. The biggest advantages of PLA over non-biodegradable plastics are that it can be produced from natural sources (e.g., corn or sugarcane), and at the end of its lifetime it can be returned to the soil by being composted with microorganisms. PLA can easily substitute petroleum-based plastics in a wide range of applications in many commodity products, such as disposable tableware, packaging, films, and agricultural twines, partially contributing to limiting plastic waste accumulation. Unfortunately, the complete replacement of fossil fuel-based plastics such as polyethylene (PE) or poly(ethylene terephthalate) (PET) by PLA is hindered by its higher cost, and, more importantly, slower degradation as compared to other degradable polymers. Thus, to make PLA more commercially attractive, ways to accelerate its degradation are actively sought. Many good reviews deal with PLA production, applications, and degradation but only in the medical or pharmaceutical field. In this respect, the present review will focus on controlled PLA degradation and biodegradation in technical applications. The work will include the main degradation mechanisms of PLA, such as its biodegradation in water, soil, and compost, in addition to thermal- and photo-degradation. The topic is of particular interest to academia and industry, mainly because the wider application of PLA is mostly dependent on discovering effective ways of accelerating its biodegradation rate at the end of its service life without compromising its properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443 · cited 5×
“The main steps of the direct condensation polymerization process involve: (i) removal of free water, (ii) oligomer polycondensation, and (iii) melt polycondensation of high Mw PLA [4,18,36].”
BackgroundMethodInfluentialControlled Ring-Opening Polymerization of Lactide and Glycolide
Dechy-Cabaret, O., Martin-Vaca, B., & Bourissou, D. (2004) · Chemical Reviews · doi:10.1021/cr040002s · Cited by 2,257
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Polymer biodegradation: Mechanisms and estimation techniques – A review
Lucas, N., Bienaime, C., Belloy, C., Queneudec, M., Silvestre, F., & Nava-Saucedo, J.-E. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.06.064 · Cited by 1,384
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Biocompatible Initiators for Lactide Polymerization
Platel, R., Hodgson, L., & Williams, C. (2008) · Polymer Reviews · doi:10.1080/15583720701834166 · Cited by 706
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Synthesis of Poly(Lactic Acid): A Review
Mehta, R., Kumar, V., Bhunia, H., & Upadhyay, S. N. (2005) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321790500304148 · Cited by 510
Alexis, F. (2005) · Polymer International · doi:10.1002/pi.1697 · Cited by 443
Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J. (1992) · Macromolecules · doi:10.1021/ma00050a006 · Cited by 407
Crystallization kinetics of poly(l-lactic acid)
Vasanthakumari, R., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90129-5 · Cited by 406
McNeill, I. C., & Leiper, H. A. (1985) · Polymer Degradation and Stability · doi:10.1016/0141-3910(85)90035-7 · Cited by 404
Biodegradation of poly(lactic acid) and its nanocomposites
Fukushima, K., Abbate, C., Tabuani, D., Gennari, M., & Camino, G. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.07.001 · Cited by 368
Polylactic acid (PLA) synthesis and modifications: a review
Cheng, Y., Deng, S., Chen, P., & Ruan, R. (2009) · Frontiers of Chemistry in China · doi:10.1007/s11458-009-0092-x · Cited by 314
Karamanlioglu, M., & Robson, G. D. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.07.004 · Cited by 301
Crystallization behavior of poly(l-lactic acid)
Di Lorenzo, M. L. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.10.020 · Cited by 295
Deroiné, M., Le Duigou, A., Corre, Y.-M., Le Gac, P.-Y., Davies, P., César, G., & Bruzaud, S. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.020 · Cited by 279
Biodegradation of polylactide in aerobic and anaerobic thermophilic conditions
Itävaara, M., Karjomaa, S., & Selin, J.-F. (2002) · Chemosphere · doi:10.1016/s0045-6535(01)00163-1 · Cited by 269
Tsuji, H., & Suzuyoshi, K. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00240-3 · Cited by 260
Kinetics and Time−Temperature Equivalence of Polymer Degradation
Lyu, Schley, J., Loy, B., Lind, D., Hobot, C., Sparer, R., & Untereker, D. (2007) · Biomacromolecules · doi:10.1021/bm070313n · Cited by 237
Oxidative degradation of polylactide (PLA) and its effects on physical and mechanical properties
Rasselet, D., Ruellan, A., Guinault, A., Miquelard-Garnier, G., Sollogoub, C., & Fayolle, B. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.10.011 · Cited by 196
Acid- and base-catalyzed hydrolyses of aliphatic polycarbonates and polyesters
Jung, J. H., Ree, M., & Kim, H. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.02.060 · Cited by 194
Crystallization and Microstructure of Poly(l-lactide-co-meso-lactide) Copolymers
Huang, J., Lisowski, M. S., Runt, J., Hall, E. S., Kean, R. T., Buehler, N., & Lin, J. S. (1998) · Macromolecules · doi:10.1021/ma9714629 · Cited by 187
Chemical synthesis of polylactide and its copolymers for medical applications
Bendix, D. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00149-3 · Cited by 187
Yang, J.-M., Chen, H.-L., You, J.-W., & Hwang, J. C. (1997) · Polymer Journal · doi:10.1295/polymj.29.657 · Cited by 163 · cited 1×
“Several PLA blends with other polymers have been studied over the past years, including: poly(4-vinyl phenol) [20,62–64], poly(vinyl acetate) [20,62,65,66], poly(vinyl chloride) [20,67], poly(ethylene) [20,68], poly(ethylene oxide) and copolymers [20,62,69,70], poly(ethylene glycol) [20,62,71], poly(ethylene-co-vinyl…”
Chain-end scission in acid catalyzed hydrolysis of poly (d,l-lactide) in solution
Shih, C. (1995) · Journal of Controlled Release · doi:10.1016/0168-3659(94)00100-9 · Cited by 159
Iñiguez-Franco, F., Auras, R., Burgess, G., Holmes, D., Fang, X., Rubino, M., & Soto-Valdez, H. (2016) · Polymer · doi:10.1016/j.polymer.2016.07.018 · Cited by 159
Baratian, S., Hall, E. S., Lin, J. S., Xu, R., & Runt, J. (2001) · Macromolecules · doi:10.1021/ma001125r · Cited by 148
Biodegradable Polymers in Medicine and Surgery
Kronenthal, R. L. (1975) · Polymers in Medicine and Surgery · doi:10.1007/978-1-4684-7744-3_9 · Cited by 148
Kalita, N. K., Bhasney, S. M., Mudenur, C., Kalamdhad, A., & Katiyar, V. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.125875 · Cited by 101
Direct Observation of Stereodefect Sites in Semicrystalline Poly(lactide) Using 13C Solid-State NMR
Zell, M. T., Padden, B. E., Paterick, A. J., Hillmyer, M. A., Kean, R. T., Thakur, K. A. M., & Munson, E. J. (1998) · Journal of the American Chemical Society · doi:10.1021/ja981773e · Cited by 33
Cited by
Khouri, N. G., Bahú, J. O., Blanco-Llamero, C., Severino, P., Concha, V. O. C., & Souto, E. B. (2024) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2024.138243 · Cited by 403
Ilyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
Huang, S., Dong, Q., Che, S., Li, R., & Tang, K. H. D. (2025) · Science of The Total Environment · doi:10.1016/j.scitotenv.2025.178911 · Cited by 132
Chausse, V., Iglesias, C., Bou-Petit, E., Ginebra, M.-P., & Pegueroles, M. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107817 · Cited by 39
Metadata
- Authors
- Teixeira, S., Eblagon, K. M., Miranda, F., R. Pereira, M. F., & Figueiredo, J. L.
- Venue
- C
- Publisher
- MDPI AG
- Published
- 2021-04-30
- Volume
- 7
- Issue
- 2
- Pages
- 42
- ISSN
- 2311-5629 (ISSN-L)
- OpenAlex
- W3161172905
- Cited by
- 237
- References
- 36
- FWCI
- 8.79
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.