Polylactic acid (PLA) synthesis and modifications: a review

Chemical syntheses of biodegradable polymers

Okada, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00039-9 · Cited by 1,202 · see citing works

The basic properties of poly(lactic acid) produced by the direct condensation polymerization of lactic acid

Ajioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Journal of Environmental Polymer Degradation · doi:10.1007/bf02068677 · Cited by 322 · see citing works

Kinetics and mechanism of cyclic esters polymerization initiated with tin(II) octoate, 1. Polymerization ofη-caprolactone

Kowalski, A., Duda, A., & Penczek, S. (1998) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(19981101)19:11 · Cited by 290 · see citing works

Chitosan Film Acylation and Effects on Biodegradability

Xu, J. L., McCarthy, S. P., Gross, R. A., & Kaplan, D. L. (1996) · Macromolecules · doi:10.1021/ma951638b · Cited by 281 · see citing works

Melt/solid polycondensation of l -lactic acid: an alternative route to poly( l -lactic acid) with high molecular weight

Moon, S. I., Lee, C.-W., Taniguchi, I., Miyamoto, M., & Kimura, Y. (2001) · Polymer · doi:10.1016/s0032-3861(00)00889-2 · Cited by 261 · see citing works

Basic Properties of Polylactic Acid Produced by the Direct Condensation Polymerization of Lactic Acid

Ajioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.68.2125 · Cited by 245 · see citing works

Plasma surface modification of poly (l-lactic acid) and poly (lactic-co-glycolic acid) films for improvement of nerve cells adhesion

Khorasani, M. T., Mirzadeh, H., & Irani, S. (2007) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2007.05.013 · Cited by 220 · see citing works

Surface modification of biodegradable electrospun nanofiber scaffolds and their interaction with fibroblasts

Park, K., Ju, Y. M., Son, J. S., Ahn, K., & Han, D. K. (2007) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856207780424997 · Cited by 210 · see citing works

A novel porous cells scaffold made of polylactide–dextran blend by combining phase-separation and particle-leaching techniques

Cai, Q., Yang, J. H., Bei, J., & Wang, S. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00168-0 · Cited by 186 · see citing works

Synthesis, characterization and degradation of ABA block copolymer of l-lactide and ε-caprolactone

Qian, H., Bei, J., & Wang, S. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00031-8 · Cited by 152 · see citing works

Comparative Performance and Barrier Properties of Biodegradable Thermoplastics and Nanobiocomposites versus PET for Food Packaging Applications

Cava, D., Giménez, E., Gavara, R., & Lagaron, J. M. (2006) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087906071354 · Cited by 119 · see citing works

Single-Step Covalent Functionalization of Polylactide Surfaces

Edlund, U., Källrot, M., & Albertsson, A. (2005) · Journal of the American Chemical Society · doi:10.1021/ja052073u · Cited by 109 · see citing works

Surface modification and characterization of chitosan or PLGA membrane with laminin by chemical and oxygen plasma treatment for neural regeneration

Huang, Y., Huang, C., Huang, Y., & Chen, K. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31036 · Cited by 89 · see citing works

Fabricating Tubular Devices from Polymers of Lactic and Glycolic Acid for Tissue Engineering

Mooney, D. J., Breuer, C. K., McNamara, K., Vacanti, J. P., & Langer, R. (1995) · Tissue Engineering · doi:10.1089/ten.1995.1.107 · Cited by 86 · see citing works

Synthesis and degradation of a tri-component copolymer derived from glycolide, L-lactide, and ε-caprolactone

Cai, Q., Bei, J., & Wang, S. (2000) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856200743698 · Cited by 79 · see citing works

Manufacture of porous polymer nerve conduits through a lyophilizing and wire‐heating process

Huang, Y., Huang, Y., Huang, C.-C., & Liu, H. (2005) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30267 · Cited by 62 · see citing works

Lactic Acid Condensation Polymers

Filachione, E. M., & Fisher, C. H. (1944) · Industrial & Engineering Chemistry · doi:10.1021/ie50411a009 · Cited by 47 · see citing works

Lipase‐catalyzed synthesis of polylactic acid: an overview of the experimental aspects

Lassalle, V., & Ferreira, M. L. (2008) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1994 · Cited by 46 · see citing works

Copolymerization of ethylene and ?-olefins with combined metallocene catalysts. II. Mathematical modeling of polymerization with single metallocene catalysts

Kim, J. D., & Soares, J. B. P. (2000) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(20000501)38:9 · Cited by 38 · see citing works

Surface functionalization of poly(lactic acid) film by UV‐photografting of N‐vinylpyrrolidone

Gutiérrez-Villarreal, M. H., Ulloa‐Hinojosa, M. G., & Gaona-Lozano, J. G. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28000 · Cited by 35 · see citing works

In vitro and in vivo characterization of nanoparticles made of MeO-PEG amine/PLA block copolymer and PLA

Sasatsu, M., Onishi, H., & Machida, Y. (2006) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2006.02.057 · Cited by 28 · see citing works

Enhanced cell affinity of poly(d,l-lactic-co-glycolic acid) (50/50) by plasma treatment with β-(1→3) (1→6)-glucan

Lee, S. G., An, E. Y., Lee, J. B., Park, J., Shin, J. W., & Kim, J. K. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.07.040 · Cited by 28 · see citing works

G-SIMS of biodegradable homo-polyesters

Ogaki, R., Green, F. M., Li, S., Vert, M., Alexander, M. R., Gilmore, I. S., & Davies, M. C. (2006) · Applied Surface Science · doi:10.1016/j.apsusc.2006.02.097 · Cited by 17 · see citing works

Two‐dimensional Network Crown Ether Complex. Synthesis and Crystal Structure of 18‐Crown‐6 Complex: [K(18‐C‐6)]2[Cd‐(mnt)2]

Wang, D., Yu, Q., & Dou, J. (2002) · Chinese Journal of Chemistry · doi:10.1002/cjoc.20020200215 · Cited by 17 · see citing works

Plasma copolymer membranes of acrylic acid and the adsorption of lysozyme on the surface

Hirotsu, T., & Tagaki, C. (2004) · Thin Solid Films · doi:10.1016/j.tsf.2003.12.005 · Cited by 9 · see citing works

MW plasma polymer thin film synthesis using diglyme precursor

Yang, J., & Gao, J. (2008) · Materials Science and Technology · doi:10.1179/174328408x269321 · Cited by 9 · see citing works

Untitled work

(2000) · doi:10.1002/1521-3927(20001201)21:18

Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review

Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443 · see citing works

Poly-lactic acid synthesis for application in biomedical devices — A review

Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174 · see citing works

Current progress on bio-based polymers and their future trends

Babu, R. P., O’Connor, K. E., & Ramakrishna, S. (2013) · Progress in Biomaterials · doi:10.1186/2194-0517-2-8 · Cited by 1,130 · see citing works

Polylactic acid: Synthesis and biomedical applications

Singhvi, M. S., Zinjarde, S. S., & Gokhale, D. V. (2019) · Journal of Applied Microbiology · doi:10.1111/jam.14290 · Cited by 883 · see citing works

Poly(lactic acid) (PLA) and polyhydroxyalkanoates (PHAs), green alternatives to petroleum-based plastics: a review

Naser, A., Deiab, I. M., & Darras, B. M. (2021) · RSC Advances · doi:10.1039/d1ra02390j · Cited by 875 · see citing works

Properties and medical applications of polylactic acid: A review

Hamad, K., Kaseem, M., Yang, H. W., Deri, F., & Ko, Y. G. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.42 · Cited by 722 · see citing works

Poly(lactic Acid): A Versatile Biobased Polymer for the Future with Multifunctional Properties—From Monomer Synthesis, Polymerization Techniques and Molecular Weight Increase to PLA Applications

Balla, E. D., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., & Bikiaris, D. Ν. (2021) · Polymers · doi:10.3390/polym13111822 · Cited by 661 · see citing works

Polylactic acid blends: The future of green, light and tough

Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640 · see citing works

Enzymes’ Power for Plastics Degradation

Tournier, V., Duquesne, S., Guillamot, F., Cramail, H., Taton, D., Marty, A., & André, I. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00644 · Cited by 601 · see citing works

Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering

Narayanan, G., Vernekar, V. N., Kuyinu, E. L., & Laurencin, C. T. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.015 · Cited by 484 · see citing works

Super tough poly(lactic acid) blends: a comprehensive review

Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465 · see citing works

Poly (Lactic Acid) Production for Tissue Engineering Applications

Lopes, M. S., Jardini, A. L., & Filho, R. M. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.07.534 · Cited by 457 · see citing works

Recyclable and (Bio)degradable Polyesters in a Circular Plastics Economy

Shi, C., Quinn, E. C., Diment, W. T., & Chen, E. Y. ‐. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00848 · Cited by 418 · see citing works

Polyester-Based (Bio)degradable Polymers as Environmentally Friendly Materials for Sustainable Development

Rydz, J., Sikorska, W., Kyulavska, M., & Christova, D. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms16010564 · Cited by 303 · see citing works

A review on biodegradable polylactic acid (PLA) production from fermentative food waste - Its applications and degradation

Swetha, T. A., Veleeswaran, A., Bora, A., Sengottuvelan, N., Ponnuchamy, K., Govarthanan, M., & Arun, A. P. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123703 · Cited by 292 · see citing works

Trends and challenges in the development of bio-based barrier coating materials for paper/cardboard food packaging; a review

Mujtaba, M., Lipponen, J., Ojanen, M., Puttonen, S., & Vaittinen, H. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.158328 · Cited by 297 · see citing works

Poly(Lactic Acid)-Based Microparticles for Drug Delivery Applications: An Overview of Recent Advances

Vlachopoulos, A., Karlioti, G., Balla, E., Daniilidis, V., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Christodoulou, E., Koumentakou, I., Karavas, E., et al. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14020359 · Cited by 277 · see citing works

Biodegradation Behavior of Poly(Butylene Adipate-Co-Terephthalate) (PBAT), Poly(Lactic Acid) (PLA), and Their Blend in Freshwater with Sediment

Fu, Y., Wu, G., Bian, X., Zeng, J., & Weng, Y. (2020) · Molecules · doi:10.3390/molecules25173946 · Cited by 235 · see citing works

Fabricating porous poly(lactic acid) fibres via electrospinning

Huang, C. Z., & Thomas, N. L. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.12.025 · Cited by 238 · see citing works

Towards Controlled Degradation of Poly(lactic) Acid in Technical Applications

Teixeira, S., Eblagon, K. M., Miranda, F. P., Pereira, M. F. R., & Figueiredo, J. L. (2021) · C – Journal of Carbon Research · doi:10.3390/c7020042 · Cited by 239 · see citing works

Synthesis, properties, and applications of polylactic acid‐based polymers

Dana, H. R., & Ebrahimi, F. (2022) · Polymer Engineering and Science · doi:10.1002/pen.26193 · Cited by 235 · see citing works

Poly lactic acid (PLA) polymers: from properties to biomedical applications

Ebrahimi, F., & Dana, H. R. (2021) · International Journal of Polymeric Materials · doi:10.1080/00914037.2021.1944140 · Cited by 218 · see citing works

Towards lactic acid bacteria-based biorefineries

Mazzoli, R., Bosco, F., Mizrahi, I., Bayer, E. A., & Pessione, E. (2014) · Biotechnology Advances · doi:10.1016/j.biotechadv.2014.07.005 · Cited by 201 · see citing works

Newly Developed Techniques on Polycondensation, Ring-Opening Polymerization and Polymer Modification: Focus on Poly(Lactic Acid)

Hu, Y., Daoud, W. A., Cheuk, K. K. L., & Lin, C. S. K. (2016) · Materials · doi:10.3390/ma9030133 · Cited by 197 · see citing works

Effects of surface modification on dispersion, mechanical, thermal and dynamic mechanical properties of injection molded PLA-hydroxyapatite composites

Akindoyo, J. O., Beg, M. D. H., Ghazali, S. B., Heim, H., & Feldmann, M. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.09.013 · Cited by 193 · see citing works

Integrated and Consolidated Review of Plastic Waste Management and Bio-Based Biodegradable Plastics: Challenges and Opportunities

Mazhandu, Z. S., Muzenda, E., Mamvura, T. A., Belaid, M., & Trust Nhubu (2020) · Sustainability · doi:10.3390/su12208360 · Cited by 198 · see citing works

Key Improvements in Interfacial Adhesion and Dispersion of Fibers/Fillers in Polymer Matrix Composites; Focus on PLA Matrix Composites

Olonisakin, K., Fan, M., Zhang, X., Li, R., Lin, W., Zhang, W., & Wenbin, Y. (2021) · Composite Interfaces · doi:10.1080/09276440.2021.1878441 · Cited by 189 · see citing works

Polylactic acid production from biotechnological routes: A review

de Albuquerque, T. L., Marques, J. E., de Queiroz, L. P., Ricardo, A. D. S., & Rocha, M. V. P. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.07.074 · Cited by 192 · see citing works

Synthesis, properties, environmental degradation, processing, and applications of Polylactic Acid (PLA): an overview

Shekhar, N., & Mondal, A. (2024) · Polymer Bulletin · doi:10.1007/s00289-024-05252-7 · Cited by 184 · see citing works

Polylactide cellulose-based nanocomposites

Vatansever, E., Arslan, D., & Nofar, M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.06.205 · Cited by 174 · see citing works

A comprehensive review on fused deposition modelling of polylactic acid

Sandanamsamy, L., Harun, W. S. W., Ishak, I., Romlay, F. R. M., Kadirgama, K., Ramasamy, D., Idris, S. R. A., & Tsumori, F. (2022) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00356-w · Cited by 183 · see citing works

Natural monomers: A mine for functional and sustainable materials – Occurrence, chemical modification and polymerization

John, G., Nagarajan, S., Vemula, P. K., Silverman, J. R., & Pillai, C. K. S. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.02.008 · Cited by 161 · see citing works

Polylactic Acid in Medicine

Davachi, S. M., & Kaffashi, B. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2014.979507 · Cited by 156 · see citing works

Microalgae-based bioplastics: Future solution towards mitigation of plastic wastes

Roy Chong, J. W., Tan, X., Khoo, K. S., Ng, H. S., Jonglertjunya, W., Yew, G. Y., & Show, P. L. (2022) · Environmental Research · doi:10.1016/j.envres.2021.112620 · Cited by 142 · see citing works

Recent advances in modified poly (lactic acid) as tissue engineering materials

Castañeda-Rodríguez, S., González‐Torres, M., Ribas‐Aparicio, R. M., Prado-Audelo, M. L. D., Leyva‐Gómez, G., Gürer, E. S., & Sharifi‐Rad, J. (2023) · Journal of Biological Engineering · doi:10.1186/s13036-023-00338-8 · Cited by 140 · see citing works

An overview of biodegradable poly (lactic acid) production from fermentative lactic acid for biomedical and bioplastic applications

Ahmad, A., BANAT, F. A., AlSafar, H. S., & Hasan, S. W. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-022-02581-3 · Cited by 139 · see citing works

Current Advances in 3D Bioprinting Technology and Its Applications for Tissue Engineering

Yu, J., Park, S. A., Kim, W. D., Ha, T., Xin, Y.-Z., Lee, J. H., & Lee, D. (2020) · Polymers · doi:10.3390/polym12122958 · Cited by 130 · see citing works

New polylactic acid/ cellulose acetate-based antimicrobial interactive single dose nanofibrous wound dressing mats

Gomaa, S., Madkour, T. M., Moghannem, S. A. M., & El-sherbiny, I. M. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.07.145 · Cited by 126 · see citing works

Polylactic acid (PLA) membrane—significance, synthesis, and applications: a review

More, N., Avhad, M. S., Utekar, S., & More, A. P. (2022) · Polymer Bulletin · doi:10.1007/s00289-022-04135-z · Cited by 119 · see citing works

Polymers Based on PLA from Synthesis Using D,L-Lactic Acid (or Racemic Lactide) and Some Biomedical Applications: A Short Review

de França, J. O. C., Valadares, D. D. S., Paiva, M. F., Dias, S. C. L., & Dias, J. A. (2022) · Polymers · doi:10.3390/polym14122317 · Cited by 112 · see citing works

Poly(lactic acid) mass transfer properties

Sonchaeng, U., Iñiguez-Franco, F., Auras, R., Selke, S., Rubino, M., & Lim, L. (2018) · Progress in polymer science · doi:10.1016/j.progpolymsci.2018.06.008 · Cited by 91 · see citing works

Mechanical and Biodegradable Properties of Jute/Flax Reinforced PLA Composites

Ejaz, M., Azad, M. M., Shah, A. U. R., Afaq, S. K., & Song, J.-I. (2020) · Fibers and Polymers · doi:10.1007/s12221-020-1370-y · Cited by 108 · see citing works

Enhancing Polymer Sustainability: Eco-Conscious Strategies

Unni, A. B., & Joseph, T. M. (2024) · Polymers · doi:10.3390/polym16131769 · Cited by 117 · see citing works

A Review of Material Degradation Modelling for the Analysis and Design of Bioabsorbable Stents

Boland, E. L., Shine, C. J., Kelly, N., Sweeney, C. A., & McHugh, P. E. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1413-5 · Cited by 100 · see citing works

Biodegradation of poly(lactic acid) and some of its based systems with Trichoderma viride

Lipşa, R., Tudorachi, N., Darie-Niță, R. N., Oprica, L. A., Vasile, C., & Chiriac, A. P. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.04.017 · Cited by 100 · see citing works

Poly(lactic acid) based hydrogels: formation, characteristics and biomedical applications

Munim, S. A., & Raza, Z. A. (2018) · Journal of Porous Materials · doi:10.1007/s10934-018-0687-z · Cited by 98 · see citing works

Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review

Vach Agocsova, S., Culenova, M., Birova, I., Omanikova, L., Moncmanova, B., Danisovic, L., Ziaran, S., Bakos, D., & Alexy, P. (2023) · Materials · doi:10.3390/ma16124267 · Cited by 98 · see citing works

Graphene modifications in polylactic acid nanocomposites: a review

Norazlina, H., & Kamal, Y. (2015) · Polymer Bulletin · doi:10.1007/s00289-015-1308-5 · Cited by 96 · see citing works

Thermoplastic matrix‐based composites produced by resin transfer molding: A review

Campos, B. M., Bourbigot, S., Fontaine, G., & Bonnet, F. (2022) · Polymer Composites · doi:10.1002/pc.26575 · Cited by 93 · see citing works

Improvement of the PLA Crystallinity and Heat Distortion Temperature Optimizing the Content of Nucleating Agents and the Injection Molding Cycle Time

Aliotta, L., Sciara, L. M., Cinelli, P., Canesi, I., & Lazzeri, A. (2022) · Polymers · doi:10.3390/polym14050977 · Cited by 83 · see citing works

Biopolymer based nanoparticles and their therapeutic potential in wound healing – A review

Kumar, M., Mahmood, S., Chopra, S., & Bhatia, A. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131335 · Cited by 93 · see citing works

Polylactic acid in the fabrication of separation membranes: A review

Vatanpour, V., Dehqan, A., Paziresh, S., Zinadini, S., Zinatizadeh, A. A., & Koyuncu, İ. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121433 · Cited by 91 · see citing works

Futuristic medical implants using bioresorbable materials and devices

Chatterjee, S., Saxena, M., Padmanabhan, D., Jayachandra, M., & Pandya, H. J. (2019) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2019.111489 · Cited by 89 · see citing works

Mechanical properties of thermoplastic parts produced by fused deposition modeling:a review

Bakır, A. A., Atik, R., & Özerinç, S. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2020-0061 · Cited by 88 · see citing works

Recent progress of preparation of branched poly(lactic acid) and its application in the modification of polylactic acid materials

Zhao, X., Li, J., Liu, J., Zhou, W., & Peng, S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.10.154 · Cited by 88 · see citing works

Spin-coating: A new approach for improving dispersion of cellulose nanocrystals and mechanical properties of poly (lactic acid) composites

Shojaeiarani, J., Bajwa, D. S., & Stark, N. M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.02.069 · Cited by 83 · see citing works

Biodegradable Flame Retardants for Biodegradable Polymer

Maqsood, M., & Seide, G. H. (2020) · Biomolecules · doi:10.3390/biom10071038 · Cited by 82 · see citing works

Recent progress in biodegradable and bioresorbable materials: From passive implants to active electronics

Morsada, Z., Hossain, M. M., Islam, M. T., Mobin, M. A. M., & Saha, S. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101257 · Cited by 77 · see citing works

Nanotechnology in cell replacement therapies for type 1 diabetes

Ernst, A. U., Bowers, D. T., Wang, L., Shariati, K., Plesser, M. D., Brown, N. K., Mehrabyan, T., & Ma, M. (2019) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2019.01.013 · Cited by 74 · see citing works

Increasing Surface Hydrophilicity in Poly(Lactic Acid) Electrospun Fibers by Addition of Pla-b-Peg Co-Polymers

Hendrick, E., & Frey, M. W. (2014) · Journal of Engineered Fibers and Fabrics · doi:10.1177/155892501400900219 · Cited by 72 · see citing works

Chemical modifications of PLA through copolymerization

Puthumana, M., Krishnan, P. S. G., & Nayak, S. K. (2020) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2020.1830650 · Cited by 72 · see citing works

PLA electrospun nanofibers modified with polypyrrole-grafted gelatin as bioactive electroconductive scaffold

Imani, F., Karimi‐Soflou, R., Shabani, I., & Karkhaneh, A. (2021) · Polymer · doi:10.1016/j.polymer.2021.123487 · Cited by 69 · see citing works

Developing a new generation of sisal composite fibres for use in industrial applications

Ramzy, A., Beermann, D., Steuernagel, L., Meiners, D., & Ziegmann, G. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.05.016 · Cited by 69 · see citing works

Biocompatible Polymers Combined with Cyclodextrins: Fascinating Materials for Drug Delivery Applications

Kost, B., Brzeziński, M., Socka, M., Baśko, M., & Biela, T. (2020) · Molecules · doi:10.3390/molecules25153404 · Cited by 67 · see citing works

Synthesis and Characterizations of Poly (Lactic Acid) by Ring-Opening Polymerization for Biomedical Applications

Lopes, M. S., Jardini, A. L., & Filho, R. M. (2014) · Chemical engineering transactions · doi:10.3303/cet1438056 · Cited by 67 · see citing works

Scaffolds for drug delivery, part I: electrospun porous poly(lactic acid) and poly(lactic acid)/poly(ethylene oxide) hybrid scaffolds

Honarbakhsh, S., & Pourdeyhimi, B. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-5161-5 · Cited by 66 · see citing works

Biocatalyzed approach for the surface functionalization of poly(L‐lactic acid) films using hydrolytic enzymes

Pellis, A., Acero, E. H., Weber, H., Obersriebnig, M., Breinbauer, R., Srebotnik, E., & Guebitz, G. M. (2015) · Biotechnology Journal · doi:10.1002/biot.201500074 · Cited by 65 · see citing works

Additive manufacturing of bioactive glass biomaterials

Simorgh, S., Alasvand, N., Khodadadi, M., Ghobadi, F., Kebria, M. M., Milan, P. B., Kargozar, S., Baino, F., Mobasheri, A., & Mozafari, M. (2022) · Methods · doi:10.1016/j.ymeth.2022.10.010 · Cited by 64 · see citing works

Cellulose modified by citric acid reinforced Poly(lactic acid) resin as fillers

Cui, X., Ozaki, A., Asoh, T., & Uyama, H. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109118 · Cited by 63 · see citing works

Peculiar crystallization and viscoelastic properties of polylactide/polytetrafluoroethylene composites induced by in-situ formed 3D nanofiber network

Jalali, A., Kim, J., Zolali, A. M., Soltani, I., Nofar, M., Behzadfar, E., & Park, C. B. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108361 · Cited by 59 · see citing works

Parameters Affecting the Mechanical Properties of Three-Dimensional (3D) Printed Carbon Fiber-Reinforced Polylactide Composites

Lee, D., & Wu, G. M. (2020) · Polymers · doi:10.3390/polym12112456 · Cited by 60 · see citing works

Biodegradable green composites: It's never too late to mend

Rafiee, K., Schritt, H., Pleißner, D., Kaur, G., & Brar, S. K. (2021) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2021.100482 · Cited by 61 · see citing works

Morphology, thermal, and dynamic mechanical properties of poly(lactic acid)/sisal whisker nanocomposites

Ahmad, E. E. M., & Luyt, A. S. (2012) · Polymer Composites · doi:10.1002/pc.22236 · Cited by 59 · see citing works

A Comparative Review on Biodegradation of Poly(Lactic Acid) in Soil, Compost, Water, and Wastewater Environments: Incorporating Mathematical Modeling Perspectives

Hajilou, N., Mostafayi, S. S., Yarin, A. L., & Shokuhfar, T. (2024) · AppliedChem · doi:10.3390/appliedchem5010001 · Cited by 58 · see citing works

3D printed polylactic acid/gelatin-nano-hydroxyapatite/platelet-rich plasma scaffold for critical-sized skull defect regeneration

Bahraminasab, M., Doostmohammadi, N., Talebi, A., Arab, S., Alizadeh, A., Ghanbari, A., & Salati, A. (2022) · BioMedical Engineering OnLine · doi:10.1186/s12938-022-01056-w · Cited by 57 · see citing works

Plastic Packaging Materials

Piergiovanni, L., & Limbo, S. (2015) · Springer briefs in molecular science · doi:10.1007/978-3-319-24732-8_5 · Cited by 57 · see citing works

Simultaneous fire safety enhancement and mechanical reinforcement of poly(lactic acid) biocomposites with hexaphenyl (nitrilotris(ethane-2,1-diyl))tris(phosphoramidate)

Tawiah, B., Yu, B., Wei, R., Yuen, R. K. K., Chen, W., Xin, J. H., & Fei, B. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.120856 · Cited by 56 · see citing works

Poly(Lactic Acid) (PLA)-Based Nanocomposites: Impact of Vermiculite, Silver, and Graphene Oxide on Thermal Stability, Isothermal Crystallization, and Local Mechanical Behavior

Khammassi, S., Tarfaoui, M., Škrlová, K., Měřínská, D., Plachá, D., & Erchiqui, F. (2022) · Journal of Composites Science · doi:10.3390/jcs6040112 · Cited by 54 · see citing works

Synthesis of a Biodegradable PLA: NMR Signal Deconvolution and End-Group Analysis

Pérez, J. M., Ruiz‐Martínez, C., & Fernández, I. (2021) · Journal of Chemical Education · doi:10.1021/acs.jchemed.1c00824 · Cited by 52 · see citing works

Enzyme-catalyzed functionalization of poly(L-lactic acid) for drug delivery applications

Pellis, A., Silvestrini, L., Scaini, D., Coburn, J. M., Gardossi, L., Kaplan, D. L., Acero, E. H., & Guebitz, G. M. (2016) · Process Biochemistry · doi:10.1016/j.procbio.2016.10.014 · Cited by 52 · see citing works

Bioresorbable composite polymeric materials for tissue engineering applications

Hajebi, S., Nasr, S. M., Rabiee, N., Bagherzadeh, M., Ahmadi, S., Rabiee, M., Tahriri, M., Tayebi, L., & Hamblin, M. R. (2020) · International Journal of Polymeric Materials · doi:10.1080/00914037.2020.1765365 · Cited by 52 · see citing works

Tailored-design of electrospun nanofiber cellulose acetate/poly(lactic acid) dressing mats loaded with a newly synthesized sulfonamide analog exhibiting superior wound healing

Elsayed, R. E., Madkour, T. M., & Azzam, R. A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.316 · Cited by 55 · see citing works

Surface polydopamine modification of bone defect repair materials: Characteristics and applications

Du, J., Zhou, Y. X., Bao, X., Kang, Z., Huang, J., Xu, G., Yi, C., & Li, D. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.974533 · Cited by 47 · see citing works

Enzymatic ring‐opening polymerization (ROP) of polylactones: roles of non‐aqueous solvents

Zhao, H. (2017) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.5444 · Cited by 47 · see citing works

Natural colorant incorporated biopolymers-based pH-sensing films for indicating the food product quality and safety

Parlak, M. E., Şahin, O. I., Dündar, A. N., Sarıcaoğlu, F. T., Smaoui, S., Gökşen, G., Koirala, P., Al‐Asmari, F., & Nirmal, N. P. (2023) · Food Chemistry · doi:10.1016/j.foodchem.2023.138160 · Cited by 46 · see citing works

Progress in the Use of Hydrogels for Antioxidant Delivery in Skin Wounds

Maeso, L., Antezana, P. E., Arana, A. G. H., Evelson, P., Orive, G., & Desimone, M. F. (2024) · Pharmaceutics · doi:10.3390/pharmaceutics16040524 · Cited by 46 · see citing works

Exploring the frontier of Polylactic Acid/Hydroxyapatite composites in bone regeneration and their revolutionary biomedical applications – A review

Omigbodun, F. T., Oladapo, B. I., & Osa-uwagboe, N. (2024) · Journal of Reinforced Plastics and Composites · doi:10.1177/07316844241278045 · Cited by 44 · see citing works

Fabrication of hierarchical porous poly (l-lactide) (PLLA) fibrous membrane by electrospinning

Lu, Z., Zhang, B., Gong, H., & Li, J. (2021) · Polymer · doi:10.1016/j.polymer.2021.123797 · Cited by 44 · see citing works

Bioreabsorbable polymers for tissue engineering: PLA, PGA, and their copolymers

Benatti, A. C. B., Pattaro, A. F., Rodrigues, A. A., Xavier, M. V., Kaasi, A., Barbosa, M. I. R., Jardini, A. L., Filho, R. M., & Kharmandayan, P. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816901-8.00004-3 · Cited by 44 · see citing works

Antimicrobial modification of PLA scaffolds with ascorbic and fumaric acids via plasma treatment

Popelka, A., Abdulkareem, A., Mahmoud, A. A., Nassr, M. G., Al-Ruweidi, M. K. A. A., Mohamoud, K. J., Hussein, M. K., Lehocký, M., Veselá, D., Humpolíček, P., et al. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126216 · Cited by 43 · see citing works

Regeneration of the peripheral nerve via multifunctional electrospun scaffolds

Ghane, N., Khalili, S., Khorasani, S. N., Neisiany, R. E., Das, O., & Ramakrishna, S. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37092 · Cited by 43 · see citing works

Collagen and the effect of poly- l -lactic acid based materials on its synthesis

Ray, S., Adelnia, H., & Ta, H. T. (2021) · Biomaterials Science · doi:10.1039/d1bm00516b · Cited by 43 · see citing works

Increased degradation of PLA/PBAT blends with organic acids and derivatives in outdoor weathering and marine environment

Rebelo, R. C., Gonçalves, L. P. C., Fonseca, A. C., Fonseca, J., Rola, M., Coelho, J. F. J., Rola, F., & Serra, A. C. (2022) · Polymer · doi:10.1016/j.polymer.2022.125223 · Cited by 42 · see citing works

Enhanced thermal and electrical properties of poly (D,L-lactide)/multi-walled carbon nanotubes composites by in-situ polymerization

Li, Q., Zhou, Q., Deng, D., Yu, Q., Li, G. U., Ke-da, G. O. N. G., & Ke-hang, X. U. (2013) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(13)62612-6 · Cited by 42 · see citing works

Polylactide Perspectives in Biomedicine: From Novel Synthesis to the Application Performance

Moya-López, C., González-Fuentes, J., Bravo, I., Chapron, D., Bourson, P., Alonso-Moreno, C., & Hermida-Merino, D. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14081673 · Cited by 30 · see citing works

Morphologies, Compatibilization and Properties of Immiscible PLA-Based Blends with Engineering Polymers: An Overview of Recent Works

Raj, A., Yousfi, M., Prashantha, K., & Samuel, C. (2024) · Polymers · doi:10.3390/polym16131776 · Cited by 43 · see citing works

Magnesium and zinc alkoxides and aryloxides supported by commercially available ligands as promoters of chemical transformations of lactic acid derivatives to industrially important fine chemicals

Petrus, R., & Sobota, P. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.06.002 · Cited by 40 · see citing works

Natural biopolyester microspheres with diverse structures and surface topologies as micro-devices for biomedical applications

Wang, Z., Zhang, X.-W., Ding, Y., Ren, Z.-W., & Wei, D. (2022) · Smart Materials in Medicine · doi:10.1016/j.smaim.2022.07.004 · Cited by 40 · see citing works

Polymers from Renewable Resources

Chiellini, E., Chiellini, E., & Cinelli, P. (2002) · Springer eBooks · doi:10.1007/978-94-017-1217-0_7 · Cited by 40 · see citing works

DTX-loaded star-shaped TAPP-PLA-b-TPGS nanoparticles for cancer chemical and photodynamic combination therapy

Wang, T., Zhu, D., Liu, G., Tao, W., Cao, W., Zhang, L., Wang, L., Chen, H., Mei, L., Huang, L., et al. (2015) · RSC Advances · doi:10.1039/c5ra09042c · Cited by 37 · see citing works

Bulk and surface modifications of polylactide

Wang, S., Cui, W., & Bei, J. (2005) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-004-2771-2 · Cited by 227 · see citing works

Synthesis, Modification and Application of Polylactic Acid

Xue, J. (2023) · Highlights in Science Engineering and Technology · doi:10.54097/hset.v52i.8700 · Cited by 4 · see citing works

Chemical modifications of PLA through copolymerization

Puthumana, M., Krishnan, P. S. G., & Nayak, S. K. (2020) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2020.1830650 · Cited by 72 · see citing works

Research Progress in Modification of Poly(lactic acid)

Wei, B. (2013) · China Plastics · Cited by 1 · see citing works

Research Progress in Chemical Modification of Poly(lactic acid)

Zheng, Y. (2009) · Cailiao daobao