Hydrochar: A Review on Its Production Technologies and Applications
Open accessThe DOI matches its Crossref record; 124 of the 124 references it cites were found in a registry or an index; 15 of the 95 sources its claims cite were checked for support.
Abstract
Recently, due to the escalating usage of non-renewable fossil fuels such as coal, natural gas and petroleum coke in electricity and power generation, and associated issues with pollution and global warming, more attention is being paid to finding alternative renewable fuel sources. Thermochemical and hydrothermal conversion processes have been used to produce biochar and hydrochar, respectively, from waste renewable biomass. Char produced from the thermochemical and hydrothermal decomposition of biomass is considered an environmentally friendly replacement for solid hydrocarbon materials such as coal and petroleum coke. Unlike thermochemically derived biochar, hydrochar has received little attention due to the lack of literature on its production technologies, physicochemical characterization, and applications. This review paper aims to fulfill these objectives and fill the knowledge gaps in the literature relating to hydrochar. Therefore, this review discusses the most recent studies on hydrochar characteristics, reaction mechanisms for char production technology such as hydrothermal carbonization, as well as hydrochar activation and functionalization. In addition, the applications of hydrochar, mainly in the fields of agriculture, pollutant adsorption, catalyst support, bioenergy, carbon sequestration, and electrochemistry are reviewed. With advancements in hydrothermal technologies and other environmentally friendly conversion technologies, hydrochar appears to be an appealing bioresource for a wide variety of energy, environmental, industrial, and commercial applications.
Overview
CoChat Summary
TL;DR
This review synthesizes hydrochar production via hydrothermal carbonization, liquefaction, and gasification, compares hydrochar with biochar, and surveys activation/functionalization and applications. It reports that hydrochar generally has lower surface area and porosity but higher H/C and O/C ratios than biochar, while activation can greatly increase surface area and enable uses in adsorption, catalysis, energy, carbon sequestration, and electrochemistry.
Key findings
- Hydrochar and biochar differ in properties: hydrochar is generally non-porous with low specific surface area, spherical morphology, 58–64 wt.% total carbon, H/C >2.3, O/C >1.7, and mostly acidic pH; biochar is porous with higher surface area (>400 m²/g), graphite-like layers, 60–80 wt.% total carbon, H/C >1.5, O/C >0.7, and mostly alkaline pH.
- Hydrothermal carbonization is typically performed at 180–240 °C for 5–240 min under subcritical water pressures, whereas pyrolysis is performed at 300–650 °C; HTC is considered the main hydrochar production process, with higher hydrochar yield than hydrothermal liquefaction or gasification, and increasing temperature/time decreases yield while increasing carbon content and decreasing oxygen content.
- Activation can improve hydrochar properties: chemical activation with K₂CO₃ or KOH at 675 °C, impregnation ratio 1.5, and N₂ flow 267 cm³/min produced activated carbon with surface area ≥2100 m²/g from algal hydrochar, compared with 4 m²/g for the hydrochar; physical activation examples reached up to 313 m²/g with air activation of almond-shell hydrochar and up to 390 m²/g with steam activation of sugarcane-bagasse hydrochar.
- Applications reported include pollutant adsorption (e.g., coffee-husk hydrochar adsorbed methylene blue at 34.9 mg/g at 210 °C for 4 h; bamboo hydrochar adsorbed Congo red at 97 mg/g; KOH-activated switchgrass hydrochar showed 100% adsorption of copper and cadmium in 24 h), energy production (sludge HTC char at 200 °C for 4 h had energy densification 1.24, heating value 15.25 MJ/kg, and energy recovery efficiency 69.8%), and electrochemistry (e.g., activated hydrochar on ZnO and activated hydrochar had surface areas of 819 and 1073 m²/g, with 117.4 F/g specific capacitance at 0.5 A/g stable for 1000 cycles).
Methods
- This is a review article, not a primary experimental study; it synthesizes recent literature on hydrochar characteristics, reaction mechanisms, production technologies (hydrothermal carbonization, liquefaction, and gasification), activation/functionalization, and applications.
- The review includes comparative tables summarizing physicochemical properties of hydrochar versus biochar and tabulating feedstocks and reaction conditions for hydrochar production through HTC and HTL.
- Main analysis is narrative synthesis and comparative discussion of reported studies, with no systematic search protocol or quantitative meta-analysis described in the provided text.
Limitations
- The paper states that hydrochar has received little attention due to a lack of literature on its production technologies, physicochemical characterization, and applications, and that in-depth research is needed on ecotoxicological properties and soil impacts for agricultural use and on carbon sequestration applicability and stability.
- The paper notes that in catalyst applications, recovering ionic liquid for reuse from hydrochar-based sulfonated catalysts was challenging.
- Evident from the text: as a narrative review, it does not describe a systematic literature search, inclusion/exclusion criteria, or quantitative meta-analysis.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures


![Figure 3 Schematic representation of the formation of hydrochar, its adsorption mechanism, and enhancement method. Reproduced with permission from Fernandez-Sanroman et al. (2021) [98]. Copyright 2021 Elsevier. Figure 3. Schematic representation of the formation of hydrochar, its adsorption mechanism, and enhancement method. Reproduced with permission from Fernandez-Sanroman et al. (2021) [98]. Copyright 2021 Elsevier.](https://figures.cochat.ai/paper-figures/13ffd5a2599a4634a9b7b93071fd167d/hydrochar-a-review-on-its-production-technologies-and-applications-figure-3.png)
Verification
Claims the paper makes
10 Valid · 6 Not valid · 56 Not checked · 18 Own results and interpretations
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“Reaction conditions can affect significantly the yield and characteristics of hydrochar and biochar [20,21].”
§ Hydrochar: A Review on Its Production Technologies and Applications > 2. Hydrochar versus Biochar
What the sources say
- Not checked — no full text of the sourcecites [20] 20. Kambo, H.S.; Dutta, A. A comparative review of biochar and hydrochar in terms of production, physico-chemical properties and applications. Renew. Sustain. Energy Rev. 2015, 45, 359-378. [CrossRef] source
- Supportedcites [21] 21. Dieguez-Alonso, A.; Funke, A.; Anca-Couce, A.; Rombolà, A.G.; Ojeda, G.; Bachmann, J.; Behrendt, F. Towards biochar and hydrochar engineering-Influence of process conditions on surface physical and chemical properties, thermal stability, nutrient availability, toxicity and wettability. Energies 2018, 11, 496. [CrossRef] source
Section 3.1 reports that conversion temperature and gas flow rate affect biochar yield, while conversion temperature, retention time, and washing affect hydrochar yield. The Introduction and Conclusions describe effects of process conditions on char properties. Page numbers were not supplied in the passages. (LLM, conf=0.94)
states a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Bio/hydrochar has received much attention as its feedstocks are abundantly available, renewable and inexpensive [7,15].”
§ Hydrochar: A Review on Its Production Technologies and Applications > 1. Introduction
What the sources say
- Partly supportedcites [7] 7. Cheng, F.; Li, X. Preparation and application of biochar-based catalysts for biofuel production. Catalysts 2018, 8, 346. [CrossRef] sourceExperimental — accuracy not yet measured
The Introduction describes biochar’s feedstock as renewable and links that advantage to its potential applications. The Conclusions say biochar production is cheap, partly because of its renewable feedstock. Neither passage says the feedstocks themselves are inexpensive or abundantly available, so those parts of the claim are not established by this source. (LLM, conf=0.82)
- Not checked — no full text of the sourcecites [15] 15. Hu, B.; Wang, K.; Wu, L.; Yu, S.H.; Antonietti, M.; Titirici, M.M. Engineering carbon materials from the hydrothermal carbonization process of biomass. Adv. Mater. 2010, 22, 813-828. [CrossRef] source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Moreover, HTC is mostly considered economically viable for wet biomass [7,8].”
§ Hydrochar: A Review on Its Production Technologies and Applications > 1. Introduction
What the sources say
- Partly supportedcites [7] 7. Cheng, F.; Li, X. Preparation and application of biochar-based catalysts for biofuel production. Catalysts 2018, 8, 346. [CrossRef] sourceExperimental — accuracy not yet measured
Section 2.2.1 (page unavailable) says HTC does not require drying and is very suitable for high-moisture feedstocks, unlike pyrolysis, which usually requires energy-intensive drying. That supports the wet-biomass aspect, but the paper does not establish that HTC is economically viable or say it is mostly considered so. (LLM, conf=0.84)
- Not checked — no full text of the sourcecites [8] 8. Hoekman, S.K.; Broch, A.; Robbins, C.; Zielinska, B.; Felix, L. Hydrothermal carbonization (HTC) of selected woody and herbaceous biomass feedstocks. Biomass Convers. Biorefinery 2013, 3, 113-126. [CrossRef] source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“Compared to slow pyrolysis, the hydrothermal carbonization process is considered a promising technology due to the elimination of the drying step.”
§ Hydrochar: A Review on Its Production Technologies and Applications > 1. Introduction
What the sources say
- Supportedcites [7] 7. Cheng, F.; Li, X. Preparation and application of biochar-based catalysts for biofuel production. Catalysts 2018, 8, 346. [CrossRef] source
Section 2.2.1 says HTC does not require drying biomass feedstock, whereas conventional pyrolysis usually requires energy-intensive drying. Section 2.1.1 identifies slow pyrolysis as a pyrolysis process, so the comparison is supported. (LLM, conf=0.91)
- Not checked — no full text of the sourcecites [8] 8. Hoekman, S.K.; Broch, A.; Robbins, C.; Zielinska, B.; Felix, L. Hydrothermal carbonization (HTC) of selected woody and herbaceous biomass feedstocks. Biomass Convers. Biorefinery 2013, 3, 113-126. [CrossRef] source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Alkaline solutions have been widely considered as chemical agents to chemically activate the produced hydrochar to remove the volatile matters resulting in the increasing of the presence of hydrophilic functional groups, such as hydroxyl and carboxylic groups.”
§ Hydrochar: A Review on Its Production Technologies and Applications > 4. Activation and Functionalization of Hydrochar
What the sources say
- Not checked — no full text of the sourcecites [65] 65. Tan, X.F.; Liu, S.B.; Liu, Y.G.; Gu, Y.L.; Zeng, G.M.; Hu, X.J.; Jiang, L.H. Biochar as potential sustainable precursors for activated carbon production: Multiple applications in environmental protection and energy storage. Bioresour. Technol. 2017, 227, 359-372. [CrossRef] source
- Partly supportedcites [68] 68. Azzaz, A.A.; Khiari, B.; Jellali, S.; Ghimbeu, C.M.; Jeguirim, M. Hydrochars production, characterization and application for wastewater treatment: A review. Renew. Sustain. Energy Rev. 2020, 127, 109882. [CrossRef] sourceExperimental — accuracy not yet measured
Section 3.2.2 (page not provided) says alkaline activation is widely applied and increases hydrophilic surface groups, including hydroxyl and carboxylic groups. It does not support the stated purpose of removing volatile matter; instead, it says the treatment reduces volatile matter losses. (LLM, conf=0.88)
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
33 more claims
Create a free account to see all 90 claims and every source verdict.
- It may state two separate claims as one. 44
- Probably not a substantial claim. 9
- The quote only partly states this claim. 2
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Hydrochar: A Review on Its Production Technologies and Applications > 6. Conclusions
“| H/C molar ratio | >2.3 | >1.5 |”
§ Hydrochar: A Review on Its Production Technologies and Applications > 6. Conclusions
“| Chinese fan palm | 180 240 210 | 1 1 1 | 61 50 57 | 55.9 64.1 58.1 | 1.64 1.5 1.6 | 24.2 28.1 25.3 | [52] |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Hydrochar: A Review on Its Production Technologies and Applications > 5.6. Electrochemical Devices
“Li and Liu (2014) prepared a walnut shell-derived hydrochar, activated hydrochar, and prepared activated hydrochar on ZnO composites for the making of supercapacitors [41].”
§ Hydrochar: A Review on Its Production Technologies and Applications > References
“41. Zhang, Z.; Zhu, Z.; Shen, B.; Liu, L. Insights into biochar and hydrochar production and applications: A review. Energy 2019, 171, 581-598. [CrossRef]”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Hydrochar: A Review on Its Production Technologies and Applications > 5.6. Electrochemical Devices
“Corn straw-derived hydrochar was activated via microwave-assisted hydrothermal activation technique by Liu et al. (2020) [117].”
§ Hydrochar: A Review on Its Production Technologies and Applications > References
“117. Li, Y.; Liu, X. Activated carbon/ZnO composites prepared using hydrochars as intermediate and their electrochemical performance in supercapacitor. Mater. Chem. Phys. 2014, 148, 380-386. [CrossRef]”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Hydrochar: A Review on Its Production Technologies and Applications > 6. Conclusions
“| Apple pomace | 17 12 | 250 300 | 0.08 | 63.2 73 | 0.1 0.06 | 26 32 | [60] |”
§ Hydrochar: A Review on Its Production Technologies and Applications > References
“60. Li, C.; Yang, X.; Zhang, Z.; Zhou, D.; Zhang, L.; Zhang, S.; Chen, J. Hydrothermal liquefaction of desert shrub Salix psammophila to high value-added chemicals and hydrochar with recycled processing water. BioResources 2013, 8, 2981-2997. [CrossRef]”
Citations
Cites
An overview of the chemical composition of biomass
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2010) · Fuel · doi:10.1016/j.fuel.2009.10.022 · Cited by 2,519 · cited 1×
“The examples of dry biomasses are woody, herbaceous, and agricultural biomass, whereas wet biomasses include algae, sewage sludge, cattle manure, and industrial effluents [4,5].”
BackgroundMohan, D., Sarswat, A., Ok, Y. S., & Pittman, C. U. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.01.120 · Cited by 2,313
A review of biochar and its use and function in soil
Sohi, S. P., Krull, E., Lopez-Capel, E., & Bol, R. (2010) · Advances in Agronomy · doi:10.1016/s0065-2113(10)05002-9 · Cited by 2,240 · cited 1×
“…application of crop improvement in agricultural sectors depends on the nature of the hydrochar used, the type of feedstock used, the type of the production process and process conditions, the morphological properties, and the nature of the soil, i.e., loamy clay, fertile, sandy, and infertile [81].”
BackgroundHydrothermal liquefaction of biomass: A review of subcritical water technologies
Toor, S. S., Rosendahl, L., & Rudolf, A. (2011) · Energy · doi:10.1016/j.energy.2011.03.013 · Cited by 1,840
Engineering carbon materials from the hydrothermal carbonization process of biomass
Hu, B., Wang, K., Wu, L., Yu, S., Antonietti, M., & Titirici, M. (2010) · Advanced Materials · doi:10.1002/adma.200902812 · Cited by 1,765 · cited 1×
“Bio/hydrochar has received much attention as its feedstocks are abundantly available, renewable and inexpensive [7,15].”
BackgroundLibra, J. A., Ro, K. S., Kammann, C., Funke, A., Berge, N. D., Neubauer, Y., Titirici, M.-M., Fühner, C., Bens, O., Kern, J., et al. (2011) · Biofuels · doi:10.4155/bfs.10.81 · Cited by 1,756 · cited 1×
“Thus, hydrochar has higher atomic ratios of hydrogen to carbon and oxygen to carbon, compared to those in biochar [24,25].”
BackgroundKambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746 · cited 1×
“Reaction conditions can affect significantly the yield and characteristics of hydrochar and biochar [20,21].”
BackgroundA review on hydrothermal liquefaction of biomass
Gollakota, A. R. K., Kishore, N., & Gu, S. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.178 · Cited by 1,306 · cited 1×
“In recent decades, many researchers have focused on finding sustainable sources for fuel production due to the incremental worldwide energy demand, environmental concerns related to greenhouse gas emissions, and the finite supply of energy from non-renewable fossil fuels [1–3].”
BackgroundProduction and utilization of biochar: A review
Cha, J. S., Park, S. H., Jung, S.-C., Ryu, C., Jeon, J.-K., Shin, M.-C., & Park, Y.-K. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.06.002 · Cited by 1,293 · cited 1×
“Physical or thermal activation can be done through gasification with reactive steam, a gas such as O 2 and CO 2 or a mixture of steam and CO 2 as an oxidizing agent [73,74].”
BackgroundMycorrhizal responses to biochar in soil–concepts and mechanisms
Warnock, D. D., Lehmann, J., Kuyper, T. W., & Rillig, M. C. (2007) · Plant and Soil · doi:10.1007/s11104-007-9391-5 · Cited by 1,269
Compositions and sorptive properties of crop residue-derived chars
Chun, Y., Sheng, G., Chiou, C. T., & Xing, B. (2004) · Environmental Science & Technology · doi:10.1021/es035034w · Cited by 1,079 · cited 1×
“[36] studied the pyrolysis of wheat residue to produce biochar at a temperature range of 300–700 °C, resulting in the production of biochar with a specific surface area in the range of 309–438 m2/g.”
BackgroundCheng, C.-H., Lehmann, J., & Engelhard, M. H. (2008) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2008.01.010 · Cited by 936 · cited 1×
“However, when the hydrochar is mixed in the soil, over a period, it becomes oxidized by interacting with atmospheric oxygen and creates a more hydrophilic nature by creating phenolic and carboxylic functional groups on the surface of the hydrochar [83].”
BackgroundRecent advances in utilization of biochar
Qian, K., Kumar, A., Zhang, H., Bellmer, D., & Huhnke, R. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.10.074 · Cited by 915 · cited 1×
“Reaction temperature has significant impacts on which reactions dominate and, generally, some of these reactions are carried out simultaneously during the process [6].”
BackgroundInfluence of Pyrolysis Temperature on Biochar Property and Function as a Heavy Metal Sorbent in Soil
Uchimiya, M., Wartelle, L. H., Klasson, K. T., Fortier, C. A., & Lima, I. M. (2011) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf104206c · Cited by 854
Production of solid biochar fuel from waste biomass by hydrothermal carbonization
Liu, Z., Quek, A., Kent Hoekman, S., & Balasubramanian, R. (2013) · Fuel · doi:10.1016/j.fuel.2012.07.069 · Cited by 808
Xue, Y., Gao, B., Yao, Y., Inyang, M., Zhang, M., Zimmerman, A. R., & Ro, K. S. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.116 · Cited by 784
Qambrani, N. A., Rahman, M. M., Won, S., Shim, S., & Ra, C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.057 · Cited by 774 · cited 1×
“However, due to the abundance of the oxygen-rich functionality and the presence of the chemically active functional groups such as ketones, COOH groups, and hydroxyl on the surface, the adsorption capability of the hydrochar is higher than biochar [88].”
BackgroundAngın, D. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.150 · Cited by 733 · cited 3×
“Angin [34] studied the physicochemical properties of biochars obtained from safflower seed cake, which is used as animal feed, based on different ranges of temperatures (400–600 ◦C) and heating rates (10–50 ◦C /min).”
BackgroundA review of hydrothermal biomass processing
Tekin, K., Karagöz, S., & Bektaş, S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.216 · Cited by 730 · cited 1×
“The objective of the production of hydrochar as a suitable sustainable adsorbent or catalysts/catalyst support through HTL and HTG is to reduce waste materials and provide energy [39,40].”
BackgroundTan, X.-F., Liu, S.-B., Liu, Y.-G., Gu, Y.-L., Zeng, G.-M., Hu, X.-J., Wang, X., Liu, S.-H., & Jiang, L.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.12.083 · Cited by 711
Removal of lead from water using biochars prepared from hydrothermal liquefaction of biomass
Liu, Z., & Zhang, F.-S. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.01.085 · Cited by 710 · cited 1×
“Pinewood and rice husk-derived hydrochars were produced via the HTL technique and applied in the removal of lead from the aqueous solution by Liu and Zhang (2009) [94].”
MethodInsights into Biochar and Hydrochar Production and Applications: A Review
Zhang, Z., Zhu, Z., Shen, B., & Liu, L. (2019) · Energy · doi:10.1016/j.energy.2019.01.035 · Cited by 687 · cited 1×
“These components undergo a series of hydrolysis, isomerization, and dehydration to produce intermediates such as furfural and finally polymerization to produce hydrochar [41].”
BackgroundLee, J., Kim, K.-H., & Kwon, E. E. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.002 · Cited by 668 · cited 2×
“…This review is mainly focused on the following aspects: as a soil amendment can be related to global concerns to , such as CO 2 emission reduction, pollution control, sustainable land use, and energy sequestration agent, wastewater treatment, soil amendment, and electrode materials [17–19].”
BackgroundInfluentialGaunt, J. L., & Lehmann, J. (2008) · Environmental Science & Technology · doi:10.1021/es071361i · Cited by 631 · cited 1×
“The concept of carbon sequestration gained huge interest around the globe due to the encouraging strategy for CO 2 mitigation [112,113].”
BackgroundMicrowave assisted preparation of activated carbon from biomass: A review
Ao, W., Fu, J., Mao, X., Kang, Q., Ran, C., Liu, Y., Zhang, H., Gao, Z., Li, J., Liu, G., et al. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.051 · Cited by 569 · cited 1×
“Chemical activation is carried out over the impregnation of bio/hydrochar with one or a mixture of chemical agents (e.g., acids, oxidizing agents or alkaline solutions), followed by an activation process in a fixed-bed reactor under nitrogen flow rate [69].”
MethodRegmi, P., Garcia Moscoso, J. L., Kumar, S., Cao, X., Mao, J., & Schafran, G. (2012) · Journal of Environmental Management · doi:10.1016/j.jenvman.2012.04.047 · Cited by 557 · cited 1×
“Regmi et al. (2012) prepared the hydrochar and activated hydrochar via the HTC process, using switchgrass to remove copper and cadmium from the aqueous solution [93].”
MethodA review on the current status of various hydrothermal technologies on biomass feedstock
Kumar, M., Olajire Oyedun, A., & Kumar, A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.270 · Cited by 534 · cited 1×
“Hydrothermal technologies are considered to be promising technologies to produce valuable products from wet biomasses through the elimination of the high energy-consuming drying step, which can be categorized into three technologies (carbonization, liquefaction and gasification) based on their operating conditions [37…”
BackgroundXiong, X., Yu, I. K. M., Cao, L., Tsang, D. C. W., Zhang, S., & Ok, Y. S. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.163 · Cited by 532 · cited 1×
“Physical or thermal activation can be done through gasification with reactive steam, a gas such as O 2 and CO 2 or a mixture of steam and CO 2 as an oxidizing agent [73,74].”
BackgroundOne Step Forward toward Characterization: Some Important Material Properties to Distinguish Biochars
Schimmelpfennig, S., & Glaser, B. (2012) · Journal of Environmental Quality · doi:10.2134/jeq2011.0146 · Cited by 518 · cited 1×
“Thus, the specific surface area of biochars obtained from pyrolysis could increase by increasing the temperature and, after reaching the maximum, could decrease due to the pores clogging [34,35].”
BackgroundAn overview of effect of process parameters on hydrothermal carbonization of biomass
Nizamuddin, S., Baloch, H. A., Griffin, G. J., Mubarak, N. M., Bhutto, A. W., Abro, R., Mazari, S. A., & Ali, B. S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.122 · Cited by 514 · cited 1×
“During hydrothermal carbonization, which is carried out at a lower temperature in water media, hemicellulose could be decomposed faster [27].”
BackgroundAn overview of the effect of pyrolysis process parameters on biochar stability
Leng, L., & Huang, H. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.09.030 · Cited by 503 · cited 2×
“Slow-pyrolysis is performed with a low he ting rate a d long residence time, r sulting in higher solid product yield [11,12].”
BackgroundMicroalgae-based biorefinery – From biofuels to natural products
Yen, H.-W., Hu, I.-C., Chen, C.-Y., Ho, S.-H., Lee, D.-J., & Chang, J.-S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.099 · Cited by 481
Hydrothermal carbonization of lignocellulosic biomass
Xiao, L.-P., Shi, Z.-J., Xu, F., & Sun, R.-C. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.060 · Cited by 478 · cited 1×
“Moreover, as the pyrolysis occurs at the higher temperature, biochar revealed a lower H/C ratio due to high carbon conversion and possesses graphite-like layers, including particles with different size ranges, while the surface of hydrochar samples is composed of spherical particles including more homogeneous particle…”
BackgroundProcess development for hydrothermal liquefaction of algae feedstocks in a continuous-flow reactor
Elliott, D. C., Hart, T. R., Schmidt, A. J., Neuenschwander, G. G., Rotness, L. J., Olarte, M. V., Zacher, A. H., Albrecht, K. O., Hallen, R. T., & Holladay, J. E. (2013) · Algal Research · doi:10.1016/j.algal.2013.08.005 · Cited by 472
A review on hydrothermal carbonization of biomass and plastic wastes to energy products
Shen, Y. (2020) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2020.105479 · Cited by 427 · cited 1×
“Hydrothermal carbonization is usually carried out at temperatures ranging from 180 °C to 240 °C for 5–240 min under subcritical water pressures [9,10].”
BackgroundPathways of lignocellulosic biomass conversion to renewable fuels
Nanda, S., Mohammad, J., Reddy, S. N., Kozinski, J. A., & Dalai, A. K. (2014) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-013-0097-z · Cited by 408 · cited 1×
“Lignin, being a polymer, is built up of phenylpropane units that provide rigidity to the plant cells and bind cellulose and hemicellulose together [26].”
BackgroundSelf-citationHydrothermal carbonization of anaerobically digested maize silage
Mumme, J., Eckervogt, L., Pielert, J., Diakité, M., Rupp, F., & Kern, J. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.06.099 · Cited by 399 · cited 1×
“Hydrothermal carbonization is usually carried out at temperatures ranging from 180 °C to 240 °C for 5–240 min under subcritical water pressures [9,10].”
BackgroundHydrothermal carbonization of biomass for energy and crop production
Reza, M. T., Andert, J., Wirth, B., Busch, D., Pielert, J., Lynam, J. G., & Mumme, J. (2014) · Applied Bioenergy · doi:10.2478/apbi-2014-0001 · Cited by 396 · cited 1×
“While treating the biomass in the HTC, depolymerization, Typical higher heating values for polymeric materials in biomass is as follows: lignin > cellulose > hemicellulose > extractives > ash [105,106]. decomposition, and degradation of polymeric compounds from the biomass takes place.”
BackgroundCharacteristics of Biochar: Microchemical Properties
(2012) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.4324/9781849770552-10 · Cited by 388 · cited 1×
“Thus, hydrochar has higher atomic ratios of hydrogen to carbon and oxygen to carbon, compared to those in biochar [24,25].”
BackgroundKambo, H. S., & Dutta, A. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.094 · Cited by 379
Kammann, C., Ratering, S., Eckhard, C., & Müller, C. (2012) · Journal of Environmental Quality · doi:10.2134/jeq2011.0132 · Cited by 331
Material derived from hydrothermal carbonization: Effects on plant growth and arbuscular mycorrhiza
Rillig, M. C., Wagner, M., Salem, M., Antunes, P. M., George, C., Ramke, H.-G., Titirici, M.-M., & Antonietti, M. (2010) · Applied Soil Ecology · doi:10.1016/j.apsoil.2010.04.011 · Cited by 320 · cited 2×
“Rillig et al. (2010) noticed the positive outcomes on the colonization of arbuscular mycorrhiza fungi and pore germination at 20% loading of hydrochar derived from beetroot chips in soil [84].”
BackgroundAzadi, P., & Farnood, R. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.05.081 · Cited by 299
Tang, Z.-E., Lim, S., Pang, Y.-L., Ong, H.-C., & Lee, K.-T. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.056 · Cited by 297 · cited 1×
“One of the most commonly used acidic heterogeneous catalysts for biodiesel production is sulfonated hydrochar, which can be easily provided by exposing hydrochar to gaseous SO 3 or by impregnating it in concentrated H 2 SO 4 [67,79].”
BackgroundBiochars and hydrochars prepared by pyrolysis and hydrothermal carbonisation of pig manure
Gascó, G., Paz-Ferreiro, J., Álvarez, M. L., Saa, A., & Méndez, A. (2018) · Waste Management · doi:10.1016/j.wasman.2018.08.015 · Cited by 294 · cited 2×
“During HTC, some of the inorganics would be washed away in water media, resulting in acidic pH levels of hydrochar [31,32].”
BackgroundPreparation and Application of Biochar-Based Catalysts for Biofuel Production
Cheng, F., & Li, X. (2018) · Catalysts · doi:10.3390/catal8090346 · Cited by 293 · cited 2×
“Bio/hydrochar has received much attention as its feedstocks are abundantly available, renewable and inexpensive [7,15].”
BackgroundKim, D., Lee, K., & Park, K. Y. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.07.037 · Cited by 261 · cited 5×
“In addition, according to the data mentioned in Tables 2 and 3, the hydrochar properties such as yield, carbon content, and HHV are highly dependent on feedstock and the reaction conditions of the hydrothermal process.”
BackgroundInfluentialA comprehensive review on hydrothermal carbonization of biomass and its applications
Sharma, R., Jasrotia, K., Singh, N., Ghosh, P., srivastava, S., Sharma, N. R., Singh, J., Kanwar, R., & Kumar, A. (2020) · Chemistry Africa · doi:10.1007/s42250-019-00098-3 · Cited by 252 · cited 1×
“The objective of the production of hydrochar as a suitable sustainable adsorbent or catalysts/catalyst support through HTL and HTG is to reduce waste materials and provide energy [39,40].”
BackgroundCatalytic hydrothermal liquefaction of algae and upgrading of biocrude: A critical review
Xu, D., Lin, G., Guo, S., Wang, S., Guo, Y., & Jing, Z. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.08.042 · Cited by 251
Fang, J., Gao, B., Chen, J., & Zimmerman, A. R. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.01.026 · Cited by 249 · cited 1×
“Along with higher hydrochar loading, adsorption efficiency increases with solution temperature [89,90].”
BackgroundApplication of biochar-based catalysts in biomass upgrading: A review
Cao, X., Sun, S., & Sun, R. (2017) · RSC Adv. · doi:10.1039/c7ra09307a · Cited by 249 · cited 2×
“One of the most commonly used acidic heterogeneous catalysts for biodiesel production is sulfonated hydrochar, which can be easily provided by exposing hydrochar to gaseous SO 3 or by impregnating it in concentrated H 2 SO 4 [67,79].”
BackgroundMethodFalco, C., Marco-Lozar, J. P., Salinas-Torres, D., Morallón, E., Cazorla-Amorós, D., Titirici, M. M., & Lozano-Castelló, D. (2013) · Carbon · doi:10.1016/j.carbon.2013.06.017 · Cited by 246
Hydrothermal carbonization (HTC) of selected woody and herbaceous biomass feedstocks
Hoekman, S. K., Broch, A., Robbins, C., Zielinska, B., & Felix, L. (2013) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-012-0066-y · Cited by 246 · cited 1×
“Moreover, HTC is mostly considered economically viable for wet biomass [7,8].”
BackgroundHydrochars production, characterization and application for wastewater treatment: A review
Azzaz, A. A., Khiari, B., Jellali, S., Ghimbeu, C. M., & Jeguirim, M. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109882 · Cited by 236 · cited 2×
“The presence of such functional groups leads to an increase in the incorporation of the metal elements in the solid surface [65,68].”
BackgroundAyinla, R. T., Dennis, J. O., Zaid, H. M., Sanusi, Y. K., Usman, F., & Adebayo, L. L. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.116 · Cited by 222 · cited 1×
“Therefore, the global demand to produce carbon materials using renewable sources has increased with an annual rate of 10% [13,14].”
BackgroundRecent developments of post-modification of biochar for electrochemical energy storage
Cheng, B.-H., Zeng, R. J., & Jiang, H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.07.060 · Cited by 216
Malghani, S., Gleixner, G., & Trumbore, S. E. (2013) · Soil Biology and Biochemistry · doi:10.1016/j.soilbio.2013.03.013 · Cited by 202
Characterization of hydrochars produced by hydrothermal carbonization of rice husk
Kalderis, D., Kotti, M. S., Méndez, A., & Gascó, G. (2014) · Solid Earth · doi:10.5194/se-5-477-2014 · Cited by 198
Production and optimization of bamboo hydrochars for adsorption of Congo red and 2-naphthol
Li, Y., Meas, A., Shan, S., Yang, R., & Gai, X. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.02.012 · Cited by 195
Pelletization of biochar from hydrothermally carbonized wood
Reza, M. T., Lynam, J. G., Vasquez, V. R., & Coronella, C. J. (2012) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.11615 · Cited by 186
Microporous carbon nanosheets derived from corncobs for lithium–sulfur batteries
Guo, J., Zhang, J., Jiang, F., Zhao, S., Su, Q., & Du, G. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.077 · Cited by 175 · cited 1×
“Guo et al. (2015) prepared a porous hydrochar with a high surface area using corncobs [119].”
MethodSchimmelpfennig, S., Müller, C., Grünhage, L., Koch, C., & Kammann, C. (2014) · Agriculture, Ecosystems & Environment · doi:10.1016/j.agee.2014.03.027 · Cited by 174 · cited 2×
“Kammann et al. (2012) and Schimmelpfennig et al. (2014) noticed identical outcomes, i.e., the emission of CO 2 and CH 4 during their carbon sequestration study using hydrochars derived from ryegrass and peanut hulls and Miscanthus giganteus as feedstocks [86,115].”
BackgroundMethodBargmann, I., Rillig, M. C., Kruse, A., Greef, J., & Kücke, M. (2014) · Journal of Plant Nutrition and Soil Science · doi:10.1002/jpln.201300069 · Cited by 172 · cited 2×
“Further, Bargmann et al. (2013) noticed the unavailability of nitrogen to the plants due to the absence of nitrogen migration in the first week of hydrochar addition.”
BackgroundHydrothermal liquefaction and gasification of biomass and model compounds: a review
Yang, C., Wang, S., Yang, J., Xu, D., Li, Y., Li, J., & Zhang, Y. (2020) · Green Chemistry · doi:10.1039/d0gc02802a · Cited by 167
Lee, J. W., Hawkins, B., Day, D. M., & Reicosky, D. C. (2010) · Energy & Environmental Science · doi:10.1039/c004561f · Cited by 166
Ronix, A., Pezoti, O., Souza, L. S., Souza, I. P. A. F., Bedin, K. C., Souza, P. S. C., Silva, T. L., Melo, S. A. R., Cazetta, A. L., & Almeida, V. C. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.08.035 · Cited by 157 · cited 2×
“The maximum adsorption efficiency was found to be 34.9 mg/g of hydrochar at 210 ◦ C for 4 h of reaction time [91].”
BackgroundInfluentialHydrothermal carbonization of natural microalgae containing a high ash content
Liu, H., Chen, Y., Yang, H., Gentili, F. G., Söderlind, U., Wang, X., Zhang, W., & Chen, H. (2019) · Fuel · doi:10.1016/j.fuel.2019.03.004 · Cited by 151 · cited 1×
“Thus, compared to biochar, which is produced through pyrolysis, hydrochar contains less ash content [28].”
BackgroundMoralı, U., Demiral, H., & Şensöz, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.04.084 · Cited by 145
Dieguez-Alonso, A., Funke, A., Anca-Couce, A., Rombolà, A., Ojeda, G., Bachmann, J., & Behrendt, F. (2018) · Energies · doi:10.3390/en11030496 · Cited by 141
A review on condensing system for biomass pyrolysis process
Papari, S., & Hawboldt, K. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.08.001 · Cited by 141 · cited 1×
“Slow-pyrolysis is performed with a low heating rate and long residence time, resulting in a higher solid product yield [11,12].”
BackgroundSulaiman, N. S., Hashim, R., Mohamad Amini, M. H., Danish, M., & Sulaiman, O. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.061 · Cited by 140 · cited 1×
“Zinc chloride (ZnCl 2 ), phosphoric acid (H 3 PO 4 ), sodium hydroxide (NaOH), potassium carbonate (K 2 CO 3 ), and potassium hydroxide (KOH) are the most used chemical activating agents for the chemical activation process [70,71].”
MethodRenewable Energy Futures: Targets, Scenarios, and Pathways
Martinot, E., Dienst, C., Weiliang, L., & Qimin, C. (2007) · Annual Review of Environment and Resources · doi:10.1146/annurev.energy.32.080106.133554 · Cited by 139 · cited 1×
“Thus, the other advantages of utilizing bio/hydrochar for the production of the carbon materials or their application as a soil amendment can be related to global concerns, such as CO2 emission reduction, pollution control, sustainable land use, and energy storage [16].”
BackgroundKołtowski, M., Charmas, B., Skubiszewska-Zięba, J., & Oleszczuk, P. (2017) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2016.10.033 · Cited by 138 · cited 1×
“The physicochemical properties of hydrochar and its porous structure characteristics such as surface functionalization and physical or chemical activation can be improved by using various modification methods [64,65].”
MethodZhu, G., Yang, L., Gao, Y., Xu, J., Chen, H., Zhu, Y., Wang, Y., Liao, C., Lu, C., & Zhu, C. (2019) · Fuel · doi:10.1016/j.fuel.2019.02.039 · Cited by 134
Wei, Y., Perez, S., & Sheng, K. (2017) · Fuel · doi:10.1016/j.fuel.2017.02.015 · Cited by 123
Masoumi, S., & Dalai, A. K. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121427 · Cited by 122 · cited 1×
“Masoumi and Dalai [61] investigated the production and characterization of activated carbon from algal hydrochar through chemical activation.”
BackgroundSelf-citationOkolie, J. A., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.05.132 · Cited by 121
Self-citationLiquefaction of sewage sludge in ethanol-water mixed solvents for bio-oil and biochar products
Lai, F., Chang, Y.-C., Huang, H., Wu, G., Xiong, J.-B., Pan, Z.-Q., & Zhou, C.-F. (2018) · Energy · doi:10.1016/j.energy.2018.01.186 · Cited by 112
Huang, M., Luo, J., Fang, Z., & Li, H. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.02.069 · Cited by 112 · cited 1×
“Huang et al. [80] studied biodiesel production using solid acid catalysts obtained from carbonizing lignin in supercritical ethanol sulfonated with H 2 SO 4 .”
MethodBroch, A., Jena, U., Hoekman, S., & Langford, J. (2013) · Energies · doi:10.3390/en7010062 · Cited by 110
Wang, T., Zhai, Y., Zhu, Y., Gan, X., Zheng, L., Peng, C., Wang, B., Li, C., & Zeng, G. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.06.093 · Cited by 109
Kang, S., Ye, J., Zhang, Y., & Chang, J. (2013) · RSC Advances · doi:10.1039/c3ra23314f · Cited by 108
Hydrochar derived from green waste by microwave hydrothermal carbonization
Shao, Y., Long, Y., Wang, H., Liu, D., Shen, D., & Chen, T. (2019) · Renewable Energy · doi:10.1016/j.renene.2018.09.041 · Cited by 104
Elliott, D. C. (2016) · Algal Research · doi:10.1016/j.algal.2015.12.002 · Cited by 102 · cited 1×
“Hydrothermal technologies are considered to be promising technologies to produce valuable products from wet biomasses through the elimination of the high energy-consuming drying step, which can be categorized into three technologies (carbonization, liquefaction and gasification) based on their operating conditions [37…”
BackgroundDai, L., Yang, B., Li, H., Tan, F., Zhu, N., Zhu, Q., He, M., Ran, Y., & Hu, G. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.07.016 · Cited by 99 · cited 1×
“Dai et al. [72] studied the physicochemical properties of carbonized hydrochar from cattle manure and its capacity in recovering nutrients (P and N) using 0–2% HCl solution.”
MethodFeng, H., Zhang, B., He, Z., Wang, S., Salih, O., & Wang, Q. (2018) · Energy · doi:10.1016/j.energy.2018.02.146 · Cited by 89
Li, Y., & Liu, X. (2014) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2014.07.058 · Cited by 85 · cited 2×
“Li and Liu (2014) prepared a walnut shell-derived hydrochar, activated hydrochar, and prepared activated hydrochar on ZnO composites for the making of supercapacitors [41].”
BackgroundMethodCongsomjit, D., & Areeprasert, C. (2021) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-020-00635-y · Cited by 74
Masoumi, S., Boahene, P. E., & Dalai, A. K. (2021) · Energy · doi:10.1016/j.energy.2020.119344 · Cited by 73 · cited 1×
“[45] studied the HTL of microalgae in a methanol-water system to produce and characterize bio-crude oil and hydrochar in sub-super critical conditions.”
BackgroundSelf-citationIntegrated hybrid architecture of metal and biochar for high performance asymmetric supercapacitors
Norouzi, O., Pourhosseini, S. E. M., Naderi, H. R., Di Maria, F., & Dutta, A. (2021) · Scientific Reports · doi:10.1038/s41598-021-84979-z · Cited by 71 · cited 1×
“Furthermore, Norouzi et al. (2021) reported on the preparation of 3D symmetric and asymmetric types of supercapacitors using algal biomass [120].”
BackgroundLi, C., Yang, X., Zhang, Z., Zhou, D., Zhang, L., Zhang, S., & Chen, J. (2013) · BioResources · doi:10.15376/biores.8.2.2981-2997 · Cited by 70
Liu, Z., & Liu, Z. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122477 · Cited by 70
Fernández-Sanromán, Á., Lama, G., Pazos, M., Rosales, E., & Sanromán, M. Á. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2020.124399 · Cited by 67 · cited 1×
“The schematic representation of the formation of hydrochar, and its adsorption mechanism and enhancement method, is shown in Figure 3 (Fernandez-Sanroman et al., 2021) [98].”
MethodSynthesis of improved hydrochar by microwave hydrothermal carbonization of green waste
Shao, Y., Tan, H., Shen, D., Zhou, Y., Jin, Z., Zhou, D., Lu, W., & Long, Y. (2020) · Fuel · doi:10.1016/j.fuel.2020.117146 · Cited by 65
Preparation and Characterization of Optimized Hydrochar from Paper Board Mill Sludge
Oumabady, S., S., P. S., Kamaludeen, S. P. B., Ramasamy, M., Kalaiselvi, P., & Parameswari, E. (2020) · Scientific Reports · doi:10.1038/s41598-019-57163-7 · Cited by 65
Pyrolysis of Miscanthus and characterization of value‐added bio‐oil and biochar products
Singh, A., Nanda, S., Guayaquil‐Sosa, J. F., & Berruti, F. (2020) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.23978 · Cited by 65
Self-citationHydrothermal carbonization of Chinese fan palm
Yao, Z., & Ma, X. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.02.130 · Cited by 63
A novel hydrochar and nickel composite for the electrochemical supercapacitor electrode material
Ding, L., Wang, Z., Li, Y., Du, Y., Liu, H., & Guo, Y. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.01.070 · Cited by 61 · cited 1×
“In another study by Ding et al. (2012), rice husk-derived hydrochar was prepared with a sulfuric acid hydrolysis technique [118].”
MethodEffect of Residence Time on Hydrothermal Carbonization of Corn Cob Residual
Zhang, L., Liu, S., Wang, B., Wang, Q., Yang, G., & Chen, J. (2015) · BioResources · doi:10.15376/biores.10.3.3979-3986 · Cited by 59
Steam gasification of hydrochar derived from hydrothermal carbonization of fruit wastes
Salaudeen, S. A., Acharya, B., & Dutta, A. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.02.115 · Cited by 59
Saber, M., Takahashi, F., & Yoshikawa, K. (2018) · Environmental Science and Pollution Research · doi:10.1007/s11356-018-3106-8 · Cited by 58
Masoumi, S., & Dalai, A. K. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.113834 · Cited by 58
Self-citationLedesma, B., Olivares-Marín, M., Álvarez-Murillo, A., Roman, S., & Nabais, J. M. V. (2018) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2018.04.018 · Cited by 46 · cited 1×
“Ledesma et al. [75] studied the physical activity process using air to promote the porosity of hydrochar obtained from HTC of almond shells.”
MethodGai, C., Zhang, F., Guo, Y., Peng, N., Liu, T., Lang, Q., Yu, X., & Liu, Z. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00924 · Cited by 43
Liu, D., Wang, Y., Jia, B., Wei, J., Liu, C., Zhu, J., Tang, S., Wu, Z., & Chen, G. (2020) · ACS Omega · doi:10.1021/acsomega.0c03605 · Cited by 42
Spataru, A., Jain, R., Chung, J. W., Gerner, G., Krebs, R., & Lens, P. N. L. (2016) · RSC Advances · doi:10.1039/c6ra22327c · Cited by 40 · cited 1×
“Spataru et al. (2016) attempted to remove orthophosphate (anions) and copper (cations) from wastewater using the hydrochar and activated (enhanced) hydrochar derived from waste sludge from the water treatment plant [97].”
BackgroundAbdelhafez, A. A., Abbas, M. H. H., & Li, J. (2017) · Engineering Applications of Biochar · doi:10.5772/intechopen.68803 · Cited by 37 · cited 2×
“During HTC, some of the inorganics would be washed away in water media, resulting in acidic pH levels of hydrochar [31,32].”
BackgroundGuo, S., Dong, X., Zhu, C., Han, Y., Fu-qin, M., & Wu, T. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.02.072 · Cited by 36
Benefits of microwave heating method in production of activated carbon
Namazi, A. B., Allen, D. G., & Jia, C. Q. (2016) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.22521 · Cited by 34 · cited 1×
“Therefore, the global demand to produce carbon materials using renewable sources has increased with an annual rate of 10% [13,14].”
BackgroundCO2 adsorption in hydrochar produced from waste biomass
Fagnani, H. M. C., da Silva, C. T. P., Pereira, M. M., Rinaldi, A. W., Arroyo, P. A., & de Barros, M. A. S. D. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1055-6 · Cited by 33 · cited 1×
“Further, Fagnani et al. (2019) prepared hydrochar and activated hydrochar from sugarcane bagasse via the hydrocarbonization technique to adsorb CO 2 from a simulated flue gas [95].”
MethodEngineering Applications of Biochar
Huang, W. (2017) · InTech eBooks · doi:10.5772/65231 · Cited by 27
Liu, X. (., Hoekman, S. K., Farthing, W., & Felix, L. (2017) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.12552 · Cited by 26
Cao, X., Peng, X., Sun, S., Zhong, L., & Sun, R. (2014) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf505074d · Cited by 26 · cited 5×
“In addition, according to the data mentioned in Tables 2 and 3, the hydrochar properties such as yield, carbon content, and HHV are highly dependent on feedstock and the reaction conditions of the hydrothermal process.”
BackgroundInfluentialNon-Energy Valorization of Residual Biomasses via HTC: CO2 Capture onto Activated Hydrochars
Gallucci, K., Taglieri, L., Papa, A. A., Di Lauro, F., Ahmad, Z., & Gallifuoco, A. (2020) · Applied Sciences · doi:10.3390/app10051879 · Cited by 24 · cited 1×
“Silver fir sawdust-derived hydrochar and activated hydrochar were prepared via the HTC technique by Gallucci et al. (2020) [96].”
MethodHydrothermal Liquefaction of Chlorella Pyrenoidosa in Ethanol-water for Bio-crude Production
Zhang, J., Zhang, Y., & Luo, Z. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.12.052 · Cited by 23
Norouzi, O., Heidari, M., Di Maria, F., & Dutta, A. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128323 · Cited by 22 · cited 2×
“Furthermore, Norouzi et al. (2021) reported on the preparation of 3D symmetric and asymmetric types of supercapacitors using algal biomass [120].”
BackgroundWaste-to-wealth application of wastewater treatment algae-derived hydrochar for Pb(II) adsorption
Yu, J., Tang, T., Cheng, F., Huang, D., Martin, J. L., Brewer, C. E., Grimm, R. L., Zhou, M., & Luo, H. (2021) · MethodsX · doi:10.1016/j.mex.2021.101263 · Cited by 21
Enzyme Immobilization Onto Biochar Produced by the Hydrothermal Carbonization of Biomass
Primožič, M., Podrepšek, G. H., Pavlovič, I., Škerget, M., Knez, Ž., & Leitgeb, M. (2019) · Acta chimica slovenica · doi:10.17344/acsi.2019.5013 · Cited by 20
Characterization of hydrochars produced by hydrothermal carbonization of rice huskPreprint
Kalderis, D., Kotti, M., Méndez, A., et al. (2014) · doi:10.5194/sed-6-657-2014 · Cited by 20
Castro, M. O., de Santiago, M. Q., Nascimento, K. S., Sousa Cavada, B., de Castro Miguel, E., de Paula, A. J., & Ferreira, O. P. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1441-7 · Cited by 14
Sadish, O., Paul Sebastian, S., Banu, K. S. P., & Mahendran, R. (2019) · International Journal of Current Microbiology and Applied Sciences · doi:10.20546/ijcmas.2019.806.199 · Cited by 12
Norouzi, O., Heidari, M., M. Martinez, M., & Dutta, A. (2020) · Energies · doi:10.3390/en13246600 · Cited by 12
Masoumi, S., Borugadda, V. B., & Dalai, A. K. (2020) · Biorefinery of Alternative Resources: Targeting Green Fuels and Platform Chemicals · doi:10.1007/978-981-15-1804-1_11 · Cited by 10 · cited 1×
“The examples of dry biomasses are woody, herbaceous, and agricultural biomass, whereas wet biomasses include algae, sewage sludge, cattle manure, and industrial effluents [4,5].”
BackgroundSelf-citationHydrothermal Liquefaction of Chlorella pyrenoidosa in Water and Ethanol
Zhang, J., Luo, Z., & Zhang, Y. (2013) · Transactions of the ASABE · doi:10.13031/2013.42576
Cited by
Biochar for a sustainable future: Environmentally friendly production and diverse applications
Afshar, M., & Mofatteh, S. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102433 · Cited by 233
Role of biochar toward carbon neutrality
Wang, L., Deng, J., Yang, X., Hou, R., & Hou, D. (2023) · Carbon Research · doi:10.1007/s44246-023-00035-7 · Cited by 195
Petrović, J., Ercegović, M., Simić, M., Koprivica, M., Dimitrijević, J., Jovanović, A., & Janković Pantić, J. (2024) · Processes · doi:10.3390/pr12010207 · Cited by 191
“Despite being considered as a waste, biomass is a valuable renewable resource and energy source [1–3].”
BackgroundInfluentialDensification of waste biomass for manufacturing solid biofuel pellets: a review
Sarker, T. R., Nanda, S., Meda, V., & Dalai, A. K. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01510-0 · Cited by 158
Self-citationKhanzada, A. K., Al-Hazmi, H. E., Kurniawan, T. A., Majtacz, J. B., Piechota, G., Kumar, G., Ezzati, P., Saeb, M. R., Rabiee, N., Karimi‐Maleh, H., et al. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.173972 · Cited by 134
Metadata
- Authors
- Masoumi, S., Borugadda, V. B., Nanda, S., & Dalai, A. K.
- Affiliations
- University of Saskatchewan (CA)
- Corresponding author
- Dalai, Ajay K.
- Venue
- Catalysts
- Publisher
- MDPI AG
- Published
- 2021-08-02
- Volume
- 11
- Issue
- 8
- Pages
- 939
- ISSN
- 2073-4344 (ISSN-L)
- OpenAlex
- W3188189605
- Cited by
- 363
- References
- 122
- Citations by year
- 2026: 95 · 2025: 99 · 2024: 84 · 2023: 52 · 2022: 28 · 2021: 5
- FWCI
- 12.82
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Catalysts (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Canada Research Chairs
- Natural Sciences and Engineering Research Council of Canada
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Keywords
- hydrochar, hydrothermal carbonization, biomass char, biomass conversion, pollutant adsorption, catalyst supports, carbon sequestration, bioenergy, electrochemistry, agricultural applications, renewable fuels
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.