State of the art and perspectives on surface strengthening process and associated mechanisms by shot peening
Open accessThe DOI matches its Crossref record; 72 of the 73 references it cites were found in a registry or an index.
Abstract
Shot peening is a surface-strengthening process that is widely used in various industries, such as aerospace, automotive, and biomedical engineering. The process involves the impact of small, spherical media, called shots, onto the surface of a material, resulting in residual compressive stress and improved surface properties. This review aims to provide an overview of the state of the art and perspectives on surface strengthening by shot peening. The review covers various aspects of shot peening, including process parameters, shot materials, and quality control techniques. The advantages and limitations of shot peening in comparison to other surface-strengthening techniques are also discussed. The findings of this review indicate that shot peening is a versatile and effective surface-strengthening technique with numerous applications, and further research is needed to fully realize its potential. In conclusion, this review provides insights into the current status and future perspectives on surface strengthening by shot peening, and it is expected to be useful for researchers, engineers, and practitioners in the field of material science and engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures
![Figure 1 Schematic representation of the shot peening process [20]. Figure 1. Schematic representation of the shot peening process [20].](https://figures.cochat.ai/paper-figures/bb39b2d7679e49e991a1062615dc2921/state-of-the-art-and-perspectives-on-surface-strengthening-process-and-figure-1.png)
![Figure 2 Schematic representation of the laser shock peening process [30]. Figure 2. Schematic representation of the laser shock peening process [30].](https://figures.cochat.ai/paper-figures/1febe76cd6514e129e55eb76c27ce8dc/state-of-the-art-and-perspectives-on-surface-strengthening-process-and-figure-2.png)
![Figure 3 Schematic representation of the ultrasonic shot peening process [3 Figure 3. Schematic representation of the ultrasonic shot peening process [39].](https://figures.cochat.ai/paper-figures/da75185291ac4e3fb0bd6e14ed28038b/state-of-the-art-and-perspectives-on-surface-strengthening-process-and-figure-3.png)


![Figure 6 Evaluation of shot peening performance based on distribution of residual stress Figure 6. Evaluation of shot peening performance based on distribution of residual stress on target [17].](https://figures.cochat.ai/paper-figures/a7cb9ebf889845218fd37eee43464898/state-of-the-art-and-perspectives-on-surface-strengthening-process-and-figure-6.png)
![( a ) ( b ) Figure 7. ( a ) Plastic deformation caused by ball impacting the workpiece surface, ( b ) microstructure of workpiece after ball impacting [75]. Figure 7. ( a ) Plastic deformation caused by ball impacting the workpiece surface, ( b ) microstructure of workpiece after ball impacting [75].](https://figures.cochat.ai/paper-figures/4c6990a4161d4fc6ad9bc73565017450/state-of-the-art-and-perspectives-on-surface-strengthening-process-and-figure-7.png)
![Figure 8 Schematic representation of microstructure evolution under shot peening [ Figure 8. Schematic representation of microstructure evolution under shot peening [78].](https://figures.cochat.ai/paper-figures/fc32efaf7bef42db9776b614cfbb7777/state-of-the-art-and-perspectives-on-surface-strengthening-process-and-figure-8.png)
![Figure 9 The microstructure refinement and mechanical strengthening of dual-phase high entropy alloy during ultrasonic shot peening [80]. Figure 9. The microstructure refinement and mechanical strengthening of dual-phase high entropy alloy during ultrasonic shot peening [80].](https://figures.cochat.ai/paper-figures/6bc718b01ec24d36985777566a73135d/state-of-the-art-and-perspectives-on-surface-strengthening-process-and-figure-9.png)
![Figure 10 Experimental results of the relationship between shot peening coverage and shot peenin time factor [84]. Figure 10. Experimental results of the relationship between shot peening coverage and shot peening time factor [84].](https://figures.cochat.ai/paper-figures/565e0d61333142c49761056631ca68c4/state-of-the-art-and-perspectives-on-surface-strengthening-process-and-figure-10.png)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tao, N. R., Wang, Z. B., Tong, W. P., Sui, M. L., Lu, J., & Lu, K. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00310-5 · Cited by 1,010 · cited 2×
“is the use of a high pressure ’ s surface, resulting in a fatigue performance [36]. reduced stress concentration, minimal increase in machined surface roughness, and easier processing of narrow also more efficient and environmentally development prospects [37].”
BackgroundGujba, A., & Medraj, M. (2014) · Materials · doi:10.3390/ma7127925 · Cited by 416 · cited 1×
“If the shock wave’s maximum pressure is greater than the workpiece’s dynamic yield strength, residual compressive stress is produced on the workpiece surface, thus improving its fatigue performance. illustrates the laser shock peening process [30].”
BackgroundRelating Almen intensity to residual stresses induced by shot peening: a numerical approach
Guagliano, M. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(00)00893-1 · Cited by 307 · cited 1×
“By gradually increasing the time of shot peening on a set of standard Wire-cut shot High hardness, typically ranging from 55 to 62 HRC, good toughness, prone to breakage, and low recovery rate, suitable for high-intensity shot peening applications. a saturation curve is generated, as shown in”
BackgroundReview of shot peening processes to obtain nanocrystalline surfaces in metal alloys
Bagheri, S., & Guagliano, M. (2009) · Surface Engineering · doi:10.1179/026708408x334087 · Cited by 297 · cited 1×
“The creation of nanocrystallized layer by the shot peening of metal alloys has been reviewed by Bagheri et al. [23], and the available microstructural characteristics of nanocrystal thin layers obtained Thus, it is necessary to conduct a review on the and perspectives of surface strengthening…”
BackgroundRubio-González, C., Ocaña, J. L., Gomez-Rosas, G., Molpeceres, C., Paredes, M., Banderas, A., Porro, J., & Morales, M. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2004.07.025 · Cited by 225 · cited 1×
“…speed, and is considered advantageous due to its strong strengthening effect, good control, and broad application range. speed, and is considered its strong strengthening effect, good control, and broad application However, the high cost of laser shock peening equipment limits its use [31,32].”
BackgroundThree-dimensional dynamic finite element analysis of shot-peening induced residual stresses
Meguid, S. A., Shagal, G., Stranart, J. C., & Daly, J. (1999) · Finite Elements in Analysis and Design · doi:10.1016/s0168-874x(98)00057-2 · Cited by 223
On the potential applications of a 3D random finite element model for the simulation of shot peening
Miao, H. Y., Larose, S., Perron, C., & Lévesque, M. (2009) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2009.03.013 · Cited by 213
Improvement of fatigue property in 7050–T7451 aluminum alloy by laser peening and shot peening
Gao, Y. K. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.01.077 · Cited by 212 · cited 1×
“Hence, considering the shot peening coverage rate of 98% as full coverage in practical processing can greatly reduce the shot peening time and improve production efficiency.”
BackgroundA three-dimensional simulation of shot peening process using multiple shot impacts
Majzoobi, G. H., Azizi, R., & Alavi Nia, A. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.02.139 · Cited by 210
Soyama, H. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.01.030 · Cited by 198 · cited 2×
“…traditional shot peening, leading to a better strengthening effect. peening, leading to a better strengthening equipment size and relatively low cost make it useful in industries Its small equipment size and relatively low cost make it useful in industries such as automotive manufacturing and…”
BackgroundA critical comparative review of cavitation peening and other surface peening methods
SOYAMA, H., & Korsunsky, A. M. (2022) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2022.117586 · Cited by 152 · cited 3×
“Characteristics New Advances”
BackgroundWu, J., Liu, H., Wei, P., Zhu, C., & Lin, Q. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.125273 · Cited by 126 · cited 4×
“Characteristics New Advances”
InfluentialA combined DEM–FEM numerical method for Shot Peening parameter optimisation
Murugaratnam, K., Utili, S., & Petrinić, N. (2014) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2014.09.001 · Cited by 121
Ünal, O., & Varol, R. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.10.184 · Cited by 117 · cited 1×
“By gradually increasing the time of shot peening on a set of standard Wire-cut shot High hardness, typically ranging from 55 to 62 HRC, good toughness, prone to breakage, and low recovery rate, suitable for high-intensity shot peening applications. a saturation curve is generated, as shown in”
BackgroundAn approach to relate shot peening finite element simulation to the actual coverage
Hassani-Gangaraj, S. M., Guagliano, M., & Farrahi, G. H. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2012.03.057 · Cited by 114 · cited 1×
“The shot peening technology for surface strengthening has shown promising potential for a wide range of applications, and its development and utilization is expected to continue in the future. wide range of applications, and its development and utilization is expected to continue in the future.”
BackgroundKikuchi, S., Nakamura, Y., Nambu, K., & Ando, M. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.11.076 · Cited by 91 · cited 1×
“is the use of a high pressure ’ s surface, resulting in a fatigue performance [36]. reduced stress concentration, minimal increase in machined surface roughness, and easier processing of narrow also more efficient and environmentally development prospects [37].”
BackgroundMenezes, M. R., Godoy, C., Buono, V. T. L., Schvartzman, M. M. D. A. M., & Wilson, J. C. A.-B. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.12.037 · Cited by 88 · cited 1×
“…and expanded to the aviation industry in the 1960s to prevent fatigue failure of aircraft parts. conducted to In the 1980s, the application of shot peening continued to increase and it has since been widely used for surface strengthening of various parts [26]. treated materials [27 – 29].”
BackgroundFatigue crack growth in residual stress fields of laser shock peened Ti6Al4V titanium alloy
Zhang, H., Cai, Z., Chi, J., Sun, R., Che, Z., Zhang, H., & Guo, W. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.161427 · Cited by 87 · cited 1×
“…speed, and is considered advantageous due to its strong strengthening effect, good control, and broad application range. speed, and is considered its strong strengthening effect, good control, and broad application However, the high cost of laser shock peening equipment limits its use [31,32].”
BackgroundQi, H., Wen, D., Yuan, Q., Zhang, L., & Chen, Z. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.08.057 · Cited by 84
Self-citationQi, H., Wen, D., Lu, C., & Li, G. (2016) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2016.03.013 · Cited by 83
Dislocation-based study on the influences of shot peening on fatigue resistance
Wang, C., Lai, Y., Wang, L., & Wang, C. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.125247 · Cited by 83
Enhancing the Structural Performance of Lightweight Metals by Shot Peening
Bagherifard, S. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801140 · Cited by 82
González, J., Bagherifard, S., Guagliano, M., & Fernandez-Pariente, I. (2017) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2017.03.017 · Cited by 80
Świetlicki, A., Szala, M., & Walczak, M. (2022) · Materials · doi:10.3390/ma15072476 · Cited by 76
Qin, Z., Li, B., Zhang, H., Wilfried, T. Y. A., Gao, T., & Xue, H. (2021) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2021.106010 · Cited by 73 · cited 1×
“By gradually increasing the time of shot peening on a set of standard Wire-cut shot High hardness, typically ranging from 55 to 62 HRC, good toughness, prone to breakage, and low recovery rate, suitable for high-intensity shot peening applications. a saturation curve is generated, as shown in”
BackgroundZhao, J., Tang, J., Zhou, W., Jiang, T., Liu, H., & Xing, B. (2021) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2021.127993 · Cited by 67
Marini, M., Piona, F., Fontanari, V., Bandini, M., & Benedetti, M. (2019) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2019.105327 · Cited by 56
Qi, H., Qin, S., Cheng, Z., Teng, Q., Hong, T., & Xie, Y. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.01.048 · Cited by 56
Self-citationKim, T.-H., Lee, H., Hyun, H. C., & Jung, S. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.09.030 · Cited by 55
Qi, H., Qin, S., Cheng, Z., Zou, Y., Cai, D., & Wen, D. (2021) · Powder Technology · doi:10.1016/j.powtec.2020.10.043 · Cited by 54
Zhang, L., Yuan, Z., Qi, Z., Cai, D., Cheng, Z., & Qi, H. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.04.046 · Cited by 53
Self-citationZhang, L., Ji, R., Fu, Y., Qi, H., Kong, F., Li, H., & Tangwarodomnukun, V. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.10.032 · Cited by 53
Self-citationThe residual stress, texture and surface changes in steel induced by cavitation
Mathias, M., Göcke, A., & Pohl, M. (1991) · Wear · doi:10.1016/0043-1648(91)90302-b · Cited by 52
Effect of Micro-Shot Peening on the Fatigue Performance of AISI 304 Stainless Steel
Chung, Y.-H., Chen, T.-C., Lee, H., & Tsay, L. (2021) · Metals · doi:10.3390/met11091408 · Cited by 52
Yin, F., Zhang, X., Chen, F., Hu, S., Ming, K., Zhao, J., Xie, L., Liu, Y., Hua, L., & Wang, J. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111771 · Cited by 48 · cited 1×
“Hence, considering the shot peening coverage rate of 98% as full coverage in practical processing can greatly reduce the shot peening time and improve production efficiency.”
BackgroundInfluences of Fine-Particle Bombarding and Conventional Shot Peening on Surface Properties of Steel
MORITA, T., Noda, S., & KAGAYA, C. (2014) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.m2013322 · Cited by 47 · cited 1×
“is the use of a high pressure ’ s surface, resulting in a fatigue performance [36]. reduced stress concentration, minimal increase in machined surface roughness, and easier processing of narrow also more efficient and environmentally development prospects [37].”
BackgroundQi, H., Shi, L., Teng, Q., Hong, T., Tangwarodomnukun, V., Liu, G., & Li, H. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.12.077 · Cited by 47
Self-citationLi, K., Liu, X., Liu, Y., Wu, X. G., Zhang, W., Yang, J., Li, W., & Zhou, S. (2022) · Materials Characterization · doi:10.1016/j.matchar.2022.112632 · Cited by 42
Li, W., Liu, P., Zhao, S., Zhang, K., Ma, F., Liu, X., Chen, X., & He, D. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.08.147 · Cited by 41 · cited 1×
“Hence, considering the shot peening coverage rate of 98% as full coverage in practical processing can greatly reduce the shot peening time and improve production efficiency.”
BackgroundImpact of time on ultrasonic cavitation peening via detection of surface plastic deformation
Bai, F., Saalbach, K.-A., Wang, L., Wang, X., & Twiefel, J. (2017) · Ultrasonics · doi:10.1016/j.ultras.2017.12.001 · Cited by 40
Ultrasonic Cavitation Peening of Stainless Steel and Nickel Alloy
Gao, Y., Wu, B., Liu, Z., Zhou, Y. S., Shen, N., & Ding, H. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4025756 · Cited by 37
Effect of abrasive water jet peening on NaCl-induced hot corrosion behavior of Ti–6Al–4V
Chakkravarthy, V., Oliveira, J. P., Mahomed, A., Yu, N., Manojkumar, P., Lakshmanan, M., Zhang, L., Raja, V., Jerome, S., Prabhu, T. R., et al. (2023) · Vacuum · doi:10.1016/j.vacuum.2023.111872 · Cited by 37 · cited 2×
“, delivered by a transducer and horn, to drive metal or ceramic projectiles to impact the workpiece for shot principle is shown in Figure 3 [39].”
BackgroundSelf-citationYu, J., Chen, J., & Ho, H. (2022) · Optics & Laser Technology · doi:10.1016/j.optlastec.2022.108721 · Cited by 36
Xu, Q., Zhou, J., Jiang, D., Yang, X. M., & Qiu, Z. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.168401 · Cited by 36 · cited 1×
“In general, the surface strengthening is always associated with the surface phase transformation, which can be induced by the surface deformation caused by the mechanical impacting on target surface, such as shot peening technology [16,17], and by the surface quenching due to the heat effect [18].”
BackgroundQian, H., Chen, M., Qi, Z., Teng, Q., Qi, H., Zhang, L., & Shan, X. (2023) · Crystals · doi:10.3390/cryst13030428 · Cited by 33
Self-citationStress field modeling of single-abrasive scratching of BK7 glass for surface integrity evaluation
Hu, W., Teng, Q., Hong, T., Saetang, V., & Qi, H. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.01.153 · Cited by 33
Self-citationSurface layer strengthening mechanism of 2060 aluminum–lithium alloy after shot-peening
Wang, Z., Xie, L., Zhang, Q., Ali, R. A., Chen, W., & Zhou, L. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.02.064 · Cited by 32 · cited 1×
“Hence, considering the shot peening coverage rate of 98% as full coverage in practical processing can greatly reduce the shot peening time and improve production efficiency.”
BackgroundJi, R., Qi, Z., Chen, J., Zhang, L., Lin, K., Lu, S., & Li, Y. (2023) · Crystals · doi:10.3390/cryst13030430 · Cited by 32 · cited 1×
“The machinery industry has seen rapid development in recent years, leading to increased demands for improved performance in mechanical parts in various industries such as defense, transportation, power energy, and engineering machinery [1–5].”
BackgroundSelf-citationGerin, B., Pessard, É., Morel, F., & Verdu, C. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.01.041 · Cited by 30 · cited 2×
“…and expanded to the aviation industry in the 1960s to prevent fatigue failure of aircraft parts. conducted to In the 1980s, the application of shot peening continued to increase and it has since been widely used for surface strengthening of various parts [26]. treated materials [27 – 29].”
BackgroundSimulation and experimental approach for shot velocity evaluation in ultrasonic shot peening
Badreddine, J., Rouhaud, E., Micoulaut, M., Retraint, D., Remy, S., François, M., Viot, P., Doubre-Baboeuf, G., Saunier, D. L., & Desfontaines, V. (2011) · Mécanique & Industries · doi:10.1051/meca/2011114 · Cited by 28 · cited 2×
“is the use of a high pressure ’ s surface, resulting in a fatigue performance [36]. reduced stress concentration, minimal increase in machined surface roughness, and easier processing of narrow also more efficient and environmentally development prospects [37].”
BackgroundInfluence of rake angle on surface integrity and fatigue performance of machined surfaces
Choi, Y. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.09.013 · Cited by 28 · cited 1×
“Hence, considering the shot peening coverage rate of 98% as full coverage in practical processing can greatly reduce the shot peening time and improve production efficiency.”
BackgroundCorrosion of alumina-magnesia castable by high manganese steel with respect to steel cleanness
Wang, Y., Huang, A., Wu, M., & Gu, H. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.02.029 · Cited by 27 · cited 1×
“…wear resistance and is widely utilized in industries such as auto-mobile, railway, electric power, and mining due to its high performance and low production costs [21]. such as automobile, railway, electric power, and mining due to its high performance and low production costs [21]. impact.”
BackgroundCheng, Z., Qin, S., & Fang, Z. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.895271 · Cited by 24
Kumar, P., Mahobia, G. S., Singh, V., & Chattopadhyay, K. (2022) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2022.107289 · Cited by 24 · cited 1×
“is the use of a high pressure ’ s surface, resulting in a fatigue performance [36]. reduced stress concentration, minimal increase in machined surface roughness, and easier processing of narrow also more efficient and environmentally development prospects [37].”
BackgroundChen, H., Wang, S., Lu, S., Qiao, Y., Wang, X., Ning, F., Guo, P., & Niu, J. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.05.066 · Cited by 23 · cited 1×
“Research has shown that grain refinement, achieved through multiple modification Additionally, its low yield strength makes it susceptible to plastic deformation during use, leading to increased wear. and aging treatment, can enhance ZGMn13 high manganese steel’s performance [22].”
BackgroundSu, K., Zhang, J., Li, H., Ji, D., & Hu, L. (2022) · Materials Letters · doi:10.1016/j.matlet.2022.133442 · Cited by 23 · cited 1×
“However, shot peening coverage that is too high will also lead to premature fatigue failure due to excessive residual tensile stress and microcracks caused by excessive stress concentration and plastic deformation.”
BackgroundGoulmy, J., Boyer, V., Retraint, D., Kanouté, P., Toualbi, L., & Rouhaud, E. (2023) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2023.112120 · Cited by 23 · cited 3×
“The shot peening process involves the acceleration of projectiles which are then directed at the surface of the workpiece, creating a layer of residual compressive stress, thereby increasing the service life of the component [19].”
BackgroundInfluentialFabrication of superhydrophobic surface on AISI316L stainless steel using a nanosecond pulse laser
Tangwarodomnukun, V., Kringram, S., Zhu, H., Qi, H., & Rujisamphan, N. (2021) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/09544054211040682 · Cited by 19
Hua, J., Liu, J., Liu, P., Zhao, X., Chen, C., & Ren, R. (2022) · Wear · doi:10.1016/j.wear.2022.204560 · Cited by 19 · cited 1×
“In general, the surface strengthening is always associated with the surface phase transformation, which can be induced by the surface deformation caused by the mechanical impacting on target surface, such as shot peening technology [16,17], and by the surface quenching due to the heat effect [18].”
BackgroundZhou, J., & Sun, Z. (2022) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2022.111586 · Cited by 18
A Novel Grain-Based DEM Model for Evaluating Surface Integrity in Scratching of RB-SiC Ceramics
Qi, H., Wang, Y., Qi, Z., Shi, L., Fang, Z., Zhang, L., Riemer, O., & Karpuschewski, B. (2022) · Materials · doi:10.3390/ma15238486 · Cited by 18 · cited 1×
“Fatigue failure and wear failure, which account for 80% of all mechanical part failures, usually originate from the surface [6–10].”
BackgroundSelf-citationLaser scribing of fluorine-doped tin oxide coated on glass substrate in air and water
Saetang, V., Qi, H., Smerchit, T., & Rujisamphan, N. (2022) · Optics & Laser Technology · doi:10.1016/j.optlastec.2022.108280 · Cited by 16
Underwater laser micromachining of silicon in pressurized environment
Charee, W., Qi, H., & Saetang, V. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10120-7 · Cited by 15
Wang, Y., Wang, Z., Ni, P., Wang, D., Lu, Y., Lu, H., Guo, S., & Chen, Z. (2023) · Coatings · doi:10.3390/coatings13040758 · Cited by 13
Shi, H., Liu, G., Yang, G., Bi, Q., Zhao, Y., Wang, B., Sun, X. S., Liu, X., Qi, H., Xu, W., et al. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.06.069 · Cited by 13 · cited 1×
“Fatigue failure and wear failure, which account for 80% of all mechanical part failures, usually originate from the surface [6–10].”
BackgroundYuan, H., Yang, W., Zhang, L., & Hong, T. (2023) · Coatings · doi:10.3390/coatings13030581 · Cited by 12
Self-citationOkura, Y., Sasaki, H., & SOYAMA, H. (2019) · Lecture notes in mechanical engineering · doi:10.1007/978-981-15-0054-1_10 · Cited by 12
Shot Stream Finite Element Model for Shot Peening Numerical Simulation and Its Experiment Study
Li, Y. (2011) · Journal of Mechanical Engineering · doi:10.3901/jme.2011.22.043 · Cited by 9
Self-citationYuan, H., You, Z., Zhuo, Y., Ye, X., Zhu, L., & Yang, W. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.897718 · Cited by 6 · cited 3×
“In general, the surface strengthening is always associated with the surface phase transformation, which can be induced by the surface deformation caused by the mechanical impacting on target surface, such as shot peening technology [16,17], and by the surface quenching due to the heat effect [18].”
BackgroundSelf-citationStrengthening Performance Optimization of Single Ball Impact Treatment by Evaluating Residual Stress
Lei, Y., Wang, Z., & Qi, H. (2022) · Materials · doi:10.3390/ma15103719 · Cited by 6
KOKUBUN, T., & SOYAMA, H. (2017) · Transactions of the JSME (in Japanese) · doi:10.1299/transjsme.17-00190 · Cited by 5
TC4 shot peening simulation and experiment
Wang, Y., Fei, L., Chen, Y., Zhang, Y., Wu, Z., & Wang, C. (2019) · Beijing Hangkong Hangtian Daxue xuebao · doi:10.13700/j.bh.1001-5965.2018.0749 · Cited by 4
Research works printed but not linked: 7
- 60. Hong, T.; Wang, Z.W.; Yuan, J.L. Numerical simulation of shot peening process using Finite Element and Discrete Element Method. China Mech. Eng. 2008, 19, 0-1316.
- 64. Li, Y.Z.; Wang, F.; Lv, J.; Xu, K.W. Finite Element analysis for shot-peening models of single shot impact and multiple impingment. J. Xi'an Jiaotong Univ. 2007, 41, 5.
- 65. Zhang, H.W.; Chen, J.Q.; Zhang, Y.D. Numerical simulation of shot-peening process based on multiple shot model. J. Plast. Eng. 2012, 19, 8.
- 69. Sheng, X.F.; Li, Z.; Zhao, K.Y.; Cheng, X.Q. Numerical simulation research on strengthening effect of shot peening at identical intensity. Surf. Technol. 2018, 47, 7.
- 73. Xin, Z.L. Shot peening process design intensit. Tool Eng. 2018, 52, 4.
- 75. Fang, B.W. Controlled Shot Peening and Residual Stress Theory; Shandong Science and Technology Press: Jinan, China, 1991.
- 82. Li, R.; Liu, D.; Wei, Z.; Xuan, L.; Qiao, M.; Xia, M. Influence of shot peening and surface integrity on the fatigue properties of 300M steel. Mech. Sci. Technol. Aerosp. Eng. 2011, 30, 1418-1423.
Cited by
Effects of peening duration on surface and wear properties of aircraft graded AA2017 alloy
Jagannati, V., Beyanagari, S. R., Turaka, S., Ragupathy, V. D., & Reddy, P. S. (2024) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2023.130361 · Cited by 35
Ji, R., Qi, Z., Chen, J., Zhang, L., Lin, K., Lu, S., & Li, Y. (2023) · Crystals · doi:10.3390/cryst13030430 · Cited by 32
Self-citationThangamani, G., Tamang, S. K., Patel, M. S., Narayanan, J. A., Pallagani, J. K., Rose, P., Gianchandani, P. K., Arunkumar, T., & Palani, I. A. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-15058-0 · Cited by 31
Zhao, X., Gu, K., Zhang, M., Weng, Z., Pan, R., Liu, B., & Wang, J. (2025) · Materials Science and Engineering A · doi:10.1016/j.msea.2025.147919 · Cited by 31
Fang, X., Wang, Z., Wang, W., Cao, X., Li, D., Wang, Z., Gong, J., & Cai, Z. (2024) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2024.131538 · Cited by 22
Metadata
- Authors
- Xie, X., Zhang, L., Zhu, L., Li, Y., Hong, T., Yang, W., & Shan, X.
- Affiliations
- Zhejiang University of Technology (CN)
- Zhejiang Guanlin Machinery Inc., Anji 313300, China
- Corresponding author
- Shan, Xiaohang
- Venue
- Coatings
- Publisher
- MDPI AG
- Published
- 2023-04-30
- Volume
- 13
- Issue
- 5
- Pages
- 859
- ISSN
- 2079-6412 (ISSN-L)
- OpenAlex
- W4367627131
- Cited by
- 49
- References
- 73
- Citations by year
- 2026: 14 · 2025: 18 · 2024: 10 · 2023: 7
- FWCI
- 4.83
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Coatings (publishedVersion, cc-by)
- Funders
- Key Research and Development Program of Zhejiang Province (2021C04011, U21A20122, 51575493)
- National Natural Science Foundation of China (2021C04011, U21A20122, 51575493)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Residual Stress
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- Keywords
- shot peening, surface strengthening, compressive residual stress, process parameters, quality control
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.