Review on Research and Development of Abrasive Scratching of Hard Brittle Materials and Its Underlying Mechanisms
Open accessThe DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Abstract
Hard brittle materials such as ceramics and crystals are commonly utilized in various industries, including information technology, mechanical engineering, and semiconductors. These materials, known for their high brittleness and hardness but low fracture toughness, pose challenges in efficient and high-quality machining. Current abrasive machining techniques involve rough grinding, fine grinding, and polishing processes, with the latter being the most time-consuming and accounting for over half of the total machining time. Improving processing parameters in rough and fine grinding can increase machining efficiency, reduce surface and subsurface damage, and improve workpiece quality, ultimately reducing the polishing time. This paper explores the abrasive scratching of hard brittle materials, examining the nucleation and propagation of cracks causing surface and subsurface damage, and the underlying mechanisms. The research provides suggestions for enhancing abrasive machining efficiency and ensuring the surface quality of hard brittle materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures



![Figure 4 Distribution of the stresses and cracks in the single abrasive Figure 4. Distribution of the stresses and cracks in the single abrasive scratching of fused silica [27].](https://figures.cochat.ai/paper-figures/2ab6f8ad56284cd58784b4adab6d38b6/review-on-research-and-development-of-abrasive-scratching-of-hard-brittle-figure-4.png)

![Figure 6 Effect of temperature on the single abrasive scratching of optical glass: ( a ) microhardnes ( b ) fracture toughness, ( c ) specific grinding force, ( d ) specific grinding energy [14]. Figure 6. Effect of temperature on the single abrasive scratching of optical glass: ( a ) microhardness, ( b ) fracture toughness, ( c ) specific grinding force, ( d ) specific grinding energy [14].](https://figures.cochat.ai/paper-figures/a1d3936fb8564a80a7554d83b1b8ee6d/review-on-research-and-development-of-abrasive-scratching-of-hard-brittle-figure-6.png)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System
LAWN, B. R., EVANS, A. G., & MARSHALL, D. B. (1980) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1980.tb10768.x · Cited by 2,108
Moving sources of heat and the temperature at sliding contacts
Jaeger, J. C. (1943) · Journal and proceedings of the Royal Society of New South Wales · doi:10.5962/p.360338 · Cited by 1,157
Direct Observation and Analysis of Indentation Cracking in Glasses and Ceramics
Cook, R. F., & Pharr, G. M. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb05119.x · Cited by 1,071
Elastic/Plastic Indentation Damage in Ceramics: The Lateral Crack System
MARSHALL, D. B., LAWN, B. R., & EVANS, A. G. (1982) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1982.tb10782.x · Cited by 775
Microfracture beneath point indentations in brittle solids
Lawn, B. R., & Swain, M. V. (1975) · Journal of Materials Science · doi:10.1007/bf00541038 · Cited by 717
Material Removal Mechanisms in Lapping and Polishing
Evans, C. J., Paul, E., Dornfeld, D., Lucca, D. A., Byrne, G., Tricard, M., Klocke, F., Dambon, O., & Mullany, B. A. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60207-8 · Cited by 383
Elastic stress fields caused by indenting brittle materials
Yoffe, E. H. (1982) · Philosophical Magazine A · doi:10.1080/01418618208236917 · Cited by 376
Li, C., Piao, Y., Meng, B., Hu, Y., Li, L., & Zhang, F. (2022) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103827 · Cited by 315
Molecular dynamics simulation of laser assisted grinding of GaN crystals
Li, C., Hu, Y., Zhang, F., Geng, Y., & Meng, B. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107856 · Cited by 257
A New Analytical Model for Estimation of Scratch‐Induced Damage in Brittle Solids
Jing, X., Maiti, S., & Subhash, G. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01471.x · Cited by 184
Composition dependence of indentation deformation and indentation cracking in glass
Sellappan, P., Rouxel, T., Celarie, F., Becker, E., Houizot, P., & Conradt, R. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.034 · Cited by 172
Temperatures in High Efficiency Deep Grinding (HEDG)
Rowe, W. B., & Jin, T. (2001) · CIRP Annals · doi:10.1016/s0007-8506(07)62105-2 · Cited by 166
Li, C., Piao, Y., Zhang, F., Zhang, Y., Hu, Y., & Wang, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac9eed · Cited by 162
Time and temperature dependence of the scratch properties of poly(methylmethacrylate) surfaces
Gauthier, C., & Schirrer, R. (2000) · Journal of Materials Science · doi:10.1023/a:1004798019914 · Cited by 158
Sliding microindentation fracture of brittle materials: Role of elastic stress fields
Ahn, Y., Farris, T. N., & Chandrasekar, S. (1998) · Mechanics of Materials · doi:10.1016/s0167-6636(98)00012-x · Cited by 150
On a stochastically grain-discretised model for 2D/3D temperature mapping prediction in grinding
Li, H., & Axinte, D. A. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.01.004 · Cited by 133
DesRuisseaux, N. R., & Zerkle, R. D. (1970) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3449689 · Cited by 124
Material removal of optical glass BK7 during single and double scratch tests
Gu, W., Yao, Z., & Liang, X.-G. (2010) · Wear · doi:10.1016/j.wear.2010.10.064 · Cited by 120
Material removal mechanism of laser-assisted grinding of RB-SiC ceramics and process optimization
Li, Z., Zhang, F., Luo, X., Chang, W., Cai, Y., Zhong, W., & Ding, F. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.002 · Cited by 115
Scratch test of soda-lime glass
Li, K., Shapiro, Y., & Li, J. C. M. (1998) · Acta Materialia · doi:10.1016/s1359-6454(98)00163-3 · Cited by 110
Zur plastischen Verformung von Germanium und InSb
Haasen, P. (1962) · The European Physical Journal A · doi:10.1007/bf01378125 · Cited by 109
The Wear of Grinding Wheels: Part 2—Fracture Wear
Malkin, S., & Cook, N. H. (1971) · Journal of Engineering for Industry · doi:10.1115/1.3428052 · Cited by 108
Material embrittlement in high strain-rate loading
Yang, X., & Zhang, B. (2019) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab263f · Cited by 105
Zhang, W., & Subhash, G. (2001) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(00)00406-6 · Cited by 104
Rowe, W. B. (2014) · Elsevier eBooks · doi:10.1016/b978-0-323-24271-4.00016-6 · Cited by 101
Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions
Wang, W., Yao, P., Wang, J., Huang, C., Zhu, H., Zou, B., Liu, H., & Yan, J. (2016) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2016.07.007 · Cited by 99
Analysis of Energy Partition in Grinding
Guo, C., & Malkin, S. (1995) · Journal of Engineering for Industry · doi:10.1115/1.2803278 · Cited by 92
Crack propagation and the material removal mechanism of glass–ceramics by the scratch test
Qiu, Z., Liu, C., Wang, H., Yang, X. Y., Fang, F., & Tang, J. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.07.021 · Cited by 89
Li, P., Chen, S., Xiao, H., Chen, Z., Qu, M., Dai, H., & Jin, T. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.105737 · Cited by 89
Rao, X., Zhang, F., Luo, X., & Ding, F. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.12.044 · Cited by 84
Analytical and Experimental Investigation of Burnout in Creep-Feed Grinding
Guo, C., & Malkin, S. (1994) · CIRP Annals · doi:10.1016/s0007-8506(07)62214-8 · Cited by 76
Analytical Thermal Models of Oblique Moving Heat Source for Deep Grinding and Cutting
Jin, T., & Cai, G. Q. (2000) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.1343458 · Cited by 72
Study on high-speed grinding mechanisms for quality and process efficiency
Li, B., Ni, J., Yang, J., & Liang, S. Y. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5297-y · Cited by 68
Rao, X., Zhang, F., Luo, X., Ding, F., Cai, Y., Sun, J., & Liu, H. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.05.015 · Cited by 67
Deformation and removal characteristics in nanoscratching of 6H-SiC with Berkovich indenter
Meng, B., Zhang, F., & Li, Z. (2014) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2014.11.034 · Cited by 62
Effect of temperature on hardness and indentation cracking of fused silica
Michél, M. D., Serbena, F. C., & Lepienski, C. M. (2006) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2006.02.113 · Cited by 61
Modelling the strain rate sensitivity on the subsurface damages of scratched glass ceramics
Yang, X. Y., Qiu, Z., Lu, C. M., Li, X., & Tang, J. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.06.191 · Cited by 59
Yang, X. Y., Qiu, Z., & Li, X. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.09.256 · Cited by 59
Li, C., Zhang, F., & Piao, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.238 · Cited by 57
Machining of Hard-Brittle Materials by a Single Point Tool Under External Hydrostatic Pressure
Yoshino, M., Ogawa, Y., & Aravindan, S. (2005) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2035695 · Cited by 56
Qi, H., Qin, S., Cheng, Z., Teng, Q., Hong, T., & Xie, Y. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.01.048 · Cited by 56
Self-citationQi, H., Qin, S., Cheng, Z., Zou, Y., Cai, D., & Wen, D. (2021) · Powder Technology · doi:10.1016/j.powtec.2020.10.043 · Cited by 54
Self-citationZhang, L., Yuan, Z., Qi, Z., Cai, D., Cheng, Z., & Qi, H. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.04.046 · Cited by 53
Self-citationPlastic deformation modes of gallium arsenide in nanoindentation and nanoscratching
Wasmer, K., Parlińska‐Wojtan, M., Gassilloud, R., Pouvreau, C., Tharian, J., & Micher, J. (2007) · Applied Physics Letters · doi:10.1063/1.2431763 · Cited by 48
Qi, H., Shi, L., Teng, Q., Hong, T., Tangwarodomnukun, V., Liu, G., & Li, H. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.12.077 · Cited by 47
Self-citationImpact erosion by high velocity micro-particles on a quartz crystal
Qi, H., Fan, J., Wang, J., & Li, H. (2014) · Tribology International · doi:10.1016/j.triboint.2014.10.016 · Cited by 42
Self-citationHigh temperature microhardness of soda-lime glass
Michél, M. D., Mikowski, A., Lepienski, C. M., Foerster, C. E., & Serbena, F. C. (2004) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2004.08.138 · Cited by 36
Nakamura, M., Sumomogi, T., & Endo, T. (2003) · Surface and Coatings Technology · doi:10.1016/s0257-8972(03)00133-6 · Cited by 34
On the erosion process on quartz crystals by the impact of multiple high-velocity micro-particles
Qi, H., Fan, J., Wang, J., & Li, H. (2015) · Tribology International · doi:10.1016/j.triboint.2015.12.003 · Cited by 33
Self-citationStress field modeling of single-abrasive scratching of BK7 glass for surface integrity evaluation
Hu, W., Teng, Q., Hong, T., Saetang, V., & Qi, H. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.01.153 · Cited by 33
Self-citationJi, R., Qi, Z., Chen, J., Zhang, L., Lin, K., Lu, S., & Li, Y. (2023) · Crystals · doi:10.3390/cryst13030430 · Cited by 32
Self-citationHou, Z. B., & Komanduri, R. (2003) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2003.09.009 · Cited by 31
Yang, X. Y., Qiu, Z., & Wang, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.05.104 · Cited by 30
Effect of Scratch Velocity on Deformation Features of C-plane Sapphire during Nanoscratching
Feng, P., Zhang, C., Wu, Z., & Zhang, J. (2013) · Strojniški vestnik – Journal of Mechanical Engineering · doi:10.5545/sv-jme.2012.679 · Cited by 29
Qi, H., Cheng, Z., Cai, D., Yin, L., Wang, Z., & Wen, D. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.04.043 · Cited by 29
Self-citationStrain Rate Effect on the Ductile Brittle Transition in Grinding Hot Pressed SiC Ceramics
Huang, P., & Zhang, J. (2020) · Micromachines · doi:10.3390/mi11060545 · Cited by 29
Niu, Y., Zhao, D., Wang, S., Li, S., Wang, Z., & Zhao, H. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102042 · Cited by 27
Crack behaviors of optical glass BK7 during scratch tests under different tool apex angles
Feng, J., Wan, Z., Wang, W., Ding, X., & Tang, Y. (2019) · Wear · doi:10.1016/j.wear.2019.05.023 · Cited by 23
Muchtar, A., Lim, L. C., & Lee, K. H. (2003) · Journal of Materials Science · doi:10.1023/a:1021192911257 · Cited by 22
Direct observation of contact damage around scratches in brittle solids
Bulsara, V. H., & Chandrasekar, S. (1997) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.277067 · Cited by 20
Chen, Z., Wen, D., Lu, J., Yang, J., & Qi, H. (2021) · Materials · doi:10.3390/ma14071691 · Cited by 19
Self-citationA Novel Grain-Based DEM Model for Evaluating Surface Integrity in Scratching of RB-SiC Ceramics
Qi, H., Wang, Y., Qi, Z., Shi, L., Fang, Z., Zhang, L., Riemer, O., & Karpuschewski, B. (2022) · Materials · doi:10.3390/ma15238486 · Cited by 18
Self-citationShi, H., Liu, G., Yang, G., Bi, Q., Zhao, Y., Wang, B., Sun, X. S., Liu, X., Qi, H., Xu, W., et al. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.06.069 · Cited by 13
Self-citationWang, Y., Wang, Z., Ni, P., Wang, D., Lu, Y., Lu, H., Guo, S., & Chen, Z. (2023) · Coatings · doi:10.3390/coatings13040758 · Cited by 13
Yuan, H., Yang, W., Zhang, L., & Hong, T. (2023) · Coatings · doi:10.3390/coatings13030581 · Cited by 12
Self-citationMukaiyama, K., Ozaki, M., & Wada, T. (2017) · International Conference on Mechanical and Aerospace Engineering · doi:10.1109/icmae.2017.8038614 · Cited by 8
Zhang, B., Yoshioka, M., & Hira, S. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.12.141 · Cited by 5
Research works printed but not linked: 6
- Shi, 1996, The critical condition of ductile grinding of hard brittle materials, Aviat. Precis. Manuf. Technol., 4, 10
- Wang, W. (2017). High Efficiency Controllable Precision Grinding Mechanisms of Fused Silica. [Ph.D. Thesis, Shandong University].
- Lin, B. (1999). Theoretical and Experimental Studies on the Ultra-precision Grinding of Engineering Ceramics. [Doctoral Thesis, Tianjin University].
- Zhao, 2004, Model establishment and mechanism research of chip-formation due to shock under ultra-high speed grinding, China Mech. Eng., 12, 1038
- Ji, P.J., Zhang, J.J., Xie, X.D., Ying, R.M., and Zhang, L. (2023). Review on Wear Characteristics of Artificial Hip Joint and Associated Physical Training. Front. Mater., 10.
- Hahn, R.S. (1962, January 18–20). On the nature of the grinding process. Proceedings of the 3rd International Machine Tool Design & Research Conference, Manchester, UK.
Cited by
Xie, X., Zhang, L., Zhu, L., Li, Y., Hong, T., Yang, W., & Shan, X. (2023) · Coatings · doi:10.3390/coatings13050859 · Cited by 49
Self-citationYang, M., Hao, J., Wu, W., Li, Z., Ma, Y., Zhou, Z., Gao, T., Liu, M., Cui, X., Zhang, Y., et al. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109881 · Cited by 40
Ji, R., Qi, Z., Chen, J., Zhang, L., Lin, K., Lu, S., & Li, Y. (2023) · Crystals · doi:10.3390/cryst13030430 · Cited by 32
Self-citationZhao, X., Gu, K., Zhang, M., Weng, Z., Pan, R., Liu, B., & Wang, J. (2025) · Materials Science and Engineering A · doi:10.1016/j.msea.2025.147919 · Cited by 31
Grinding mechanics of ceramics: from mechanism to modeling
Xu, W., Li, C., Xu, W., Wang, W., Zhang, Y.-B., Yang, M., Cui, X., Li, B.-K., Liu, M.-Z., Gao, T., et al. (2025) · Advances in Manufacturing · doi:10.1007/s40436-025-00553-0 · Cited by 20
Metadata
- Authors
- Qian, H., Chen, M., Qi, Z., Teng, Q., Qi, H., Zhang, L., & Shan, X.
- Affiliations
- Hangzhou Vocational and Technical College (CN)
- Zhejiang Wanli University (CN)
- Central South University (CN)
- Zhejiang University of Technology (CN)
- Corresponding author
- Shan, Xiaohang
- Venue
- Crystals
- Publisher
- MDPI AG
- Published
- 2023-03-02
- Volume
- 13
- Issue
- 3
- Pages
- 428
- ISSN
- 2073-4352 (ISSN-L)
- OpenAlex
- W4322774631
- Cited by
- 33
- References
- 67
- Citations by year
- 2026: 6 · 2025: 8 · 2024: 9 · 2023: 10
- FWCI
- 2.61
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Crystals (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Key Research and Development Program of Zhejiang Province (2021C04011, 51575493)
- National Natural Science Foundation of China (2021C04011, 51575493)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Advanced Surface Polishing Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Mechanical Engineering › Erosion and Abrasive Machining
- Keywords
- hard and brittle materials, ceramics, crack nucleation, crack propagation, surface damage, subsurface damage, polishing, rough grinding, fine grinding, machining efficiency, surface quality
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.