Critical Review of Flywheel Energy Storage System
Open accessThe DOI matches its Crossref record; 147 of the 147 references it cites were found in a registry or an index.
Abstract
This review presents a detailed summary of the latest technologies used in flywheel energy storage systems (FESS). This paper covers the types of technologies and systems employed within FESS, the range of materials used in the production of FESS, and the reasons for the use of these materials. Furthermore, this paper provides an overview of the types of uses of FESS, covering vehicles and the transport industry, grid leveling and power storage for domestic and industrial electricity providers, their use in motorsport, and applications for space, satellites, and spacecraft. Different types of machines for flywheel energy storage systems are also discussed. This serves to analyse which implementations reduce the cost of permanent magnet synchronous machines. As well as this, further investigations need to be carried out to determine the ideal temperature range of operation. Induction machines are currently stoutly designed with lower manufacturing cost, making them unsuitable for high-speed operations. Brushless direct current machines, the Homolar machines, and permanent magnet synchronous machines should also be considered for future research activities to improve their performance in a flywheel energy storage system. An active magnetic bearing can also be used alongside mechanical bearings to reduce the control systems’ complications, thereby making the entire system cost-effective.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage systems: A comparative life cycle cost analysis
Zakeri, B., & Syri, S. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.10.011 · Cited by 1,861 · cited 1×
“The lifecycle cost for FESS is less than that for batteries [53].”
BackgroundLead batteries for utility energy storage: A review
May, G. J., Davidson, A., & Monahov, B. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2017.11.008 · Cited by 1,038
Energy storage: Applications and challenges
Kousksou, T., Bruel, P., Jamil, A., El Rhafiki, T., & Zeraouli, Y. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2013.08.015 · Cited by 1,032 · cited 1×
“FESS can be reused many more times than batteries, and recharging is also quicker [52].”
BackgroundHigh-Speed Electrical Machines: Technologies, Trends, and Developments
Gerada, D., Mebarki, A., Brown, N. L., Gerada, C., Cavagnino, A., & Boglietti, A. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2286777 · Cited by 1,006 · cited 1×
“The composite flywheels are designed to carry high speeds as well as rotational stress thresholds compared to steel-based ones [65,66].”
BackgroundApplication of graphene in energy storage device – A review
Olabi, A. G., Abdelkareem, M. A., Wilberforce, T., & Sayed, E. T. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110026 · Cited by 852 · cited 1×
“Regarding energy conversion devices, fuel cells are efficient devices [15–17] that are fueled by renewable fuels such as biohydrogen [18], bio ‐ gas [19], or other biomass resources [20,21]; they have high potential to replace conven ‐ tional energy conversion sysetms in several applications, such…”
BackgroundSelf-citationCritical review of energy storage systems
Olabi, A. G., Onumaegbu, C., Wilberforce, T., Ramadan, M., Abdelkareem, M. A., & Al – Alami, A. H. (2021) · Energy · doi:10.1016/j.energy.2020.118987 · Cited by 793
Self-citationProgress in carbon capture technologies
Wilberforce, T., Olabi, A. G., Sayed, E. T., Elsaid, K., & Abdelkareem, M. A. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.143203 · Cited by 710
Self-citationFuel cell application in the automotive industry and future perspective
Olabi, A. G., Wilberforce, T., & Abdelkareem, M. A. (2021) · Energy · doi:10.1016/j.energy.2020.118955 · Cited by 663
Self-citationEnvironmental aspects of fuel cells: A review
Abdelkareem, M. A., Elsaid, K., Wilberforce, T., Kamil, M., Sayed, E. T., & Olabi, A. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141803 · Cited by 655
Self-citationBaroutaji, A., Wilberforce, T., Ramadan, M., & Olabi, A. G. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.02.022 · Cited by 592 · cited 1×
“Regarding energy conversion devices, fuel cells are efficient devices [15–17] that are fueled by renewable fuels such as biohydrogen [18], biogas [19], or other biomass resources [20,21]; they have high potential to replace conventional energy conversion sysetms in several applications, such as water desalination [22,…”
BackgroundSelf-citationAdvances in stationary and portable fuel cell applications
Wilberforce, T., Alaswad, A., Palumbo, A., Dassisti, M., & Olabi, A. G. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.02.057 · Cited by 570 · cited 1×
“Regarding energy conversion devices, fuel cells are efficient devices [15–17] that are fueled by renewable fuels such as biohydrogen [18], biogas [19], or other biomass resources [20,21]; they have high potential to replace conventional energy conversion sysetms in several applications, such as water desalination [22,…”
BackgroundSelf-citationA Review of Flywheel Energy Storage System Technologies and Their Applications
Amiryar, M., & Pullen, K. (2017) · Applied Sciences · doi:10.3390/app7030286 · Cited by 563 · cited 1×
“…achieved High capital cost, whether due to the materials’ cost for the light rotational mass, i.e., at high rpm, or for the magnetic bearing using heavy rotational masses High self ‐ discharge rate and low energy density [29] [47] [48] [49] [50,51] There are two classifications of speed rating:”
BackgroundEnvironmental impact of desalination technologies: A review
Elsaid, K., Kamil, M., Sayed, E. T., Abdelkareem, M. A., Wilberforce, T., & Olabi, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141528 · Cited by 550 · cited 1×
“The severe environmental impact of fossil fuels, used in all aspects of our lives, is a serious threat, as is clear from the resulting health problems and climate change [1,2].”
BackgroundSelf-citationDevelopments of electric cars and fuel cell hydrogen electric cars
Wilberforce, T., El-Hassan, Z., Khatib, F. N., Al Makky, A., Baroutaji, A., Carton, J. G., & Olabi, A. G. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.07.054 · Cited by 478 · cited 1×
“…fuels such as biohydrogen [18], bio ‐ gas [19], or other biomass resources [20,21]; they have high potential to replace conven ‐ tional energy conversion sysetms in several applications, such as water desalination [22,23], transportation [24–26], aviation [27], and portable applications [28].”
BackgroundSelf-citationSuperconductor bearings, flywheels and transportation
Werfel, F. N., Floegel-Delor, U., Rothfeld, R., Riedel, T., Goebel, B., Wippich, D., & Schirrmeister, P. (2012) · Superconductor Science and Technology · doi:10.1088/0953-2048/25/1/014007 · Cited by 478 · cited 2×
“Bearing Mechanical Magnetic [59] Application Power quality Traction and aerospace industry [60] Cost Low High [60]”
BackgroundFlywheel energy and power storage systems
Bolund, B., Bernhoff, H., & Leijon, M. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2005.01.004 · Cited by 476 · cited 1×
“This causes the wheel to slow back down [30].”
BackgroundCharacterisation of electrical energy storage technologies
Ferreira, H. L., Garde, R., Fulli, G., Kling, W., & Lopes, J. P. (2013) · Energy · doi:10.1016/j.energy.2013.02.037 · Cited by 463 · cited 1×
“FESS present a green alternative technology to traditional chemicalbased batteries for short-term storage needs [39,40], doing so without hazardous materials and offering very long lifetime (millions of full-depth discharge cycles) [41], ease of production [42,43], use, and decommissioning [44], especially with the cu…”
BackgroundOutlook of carbon capture technology and challenges
Wilberforce, T., Baroutaji, A., Soudan, B., Al-Alami, A. H., & Olabi, A. G. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.11.424 · Cited by 462 · cited 1×
“…scientists have proposed different solutions, such as waste heat recycling [3,4], developing efficient energy conver ‐ sion systems that have low or no environmental impact [5–7], transitioning from fossil fuel resources to renewable energy resources [8–10], and, finally, CO 2 capture [11–14].”
BackgroundSelf-citationA comprehensive review of Flywheel Energy Storage System technology
Mousavi G, S. M., Faraji, F., Majazi, A., & Al-Haddad, K. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.060 · Cited by 449
A review of mechanical energy storage systems combined with wind and solar applications
Mahmoud, M., Ramadan, M., Olabi, A.-G., Pullen, K., & Naher, S. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112670 · Cited by 430 · cited 5×
“However, in the developing industry, they offer the best composites regarding high strength and light weight and the most advanced electronics for power and control FESS, making them a genuine alternative to chemical battery storage systems [29].”
BackgroundMethodInfluentialSelf-citationJack, A. G., Mecrow, B. C., & Haylock, J. A. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.511646 · Cited by 368
Renewable energy and energy storage systems
Olabi, A. G. (2017) · Energy · doi:10.1016/j.energy.2017.07.054 · Cited by 360 · cited 1×
“FESS present a green alternative technology to traditional chem ‐ ical ‐ based batteries for short ‐ term storage needs [39,40], doing so without hazardous ma ‐ terials and offering very long lifetime (millions of full ‐ depth discharge cycles) [41], ease of production [42,43], use, and…”
MethodSelf-citationSynchronous Reluctance Machines-A Viable Alternative for AC Drives?
Lipo, T. A. (1991) · Electric Machines & Power Systems · doi:10.1080/07313569108909556 · Cited by 333 · cited 1×
“Saliency Double (Stator and Rotor) Single (Rotor) [96] Sensor Salient poles (Concentrated coil) Conventional AC machine [97] Rotor Salient poles Arrangement of internal flux guides [98] Winding Single tooth winding Poly phase distributed windings [99,100] Excitation Pulse DC voltage sequence Balanced sinusoidal curren…”
BackgroundJack, A. G., Mecrow, B. C., & Haylock, J. (2002) · IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting · doi:10.1109/ias.1995.530372 · Cited by 306
Power Electronics in Smart Electrical Energy Networks
(2008) · Power Systems · doi:10.1007/978-1-84800-318-7 · Cited by 289 · cited 1×
“Better control systems are another important recent breakthrough in the develop ‐ ment of FESS [32,36–38].”
BackgroundElectric Vehicle Traction Based on Synchronous Reluctance Motors
Bianchi, N., Bolognani, S., Carraro, E., Castiello, M., & Fornasiero, E. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2599850 · Cited by 287 · cited 2×
“Diagram of a synchronous reluctance motor, adapted from [95].”
BackgroundSalameh, T., Abdelkareem, M. A., Olabi, A. G., Sayed, E. T., Al-Chaderchi, M., & Rezk, H. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.08.153 · Cited by 238 · cited 1×
“Regarding energy conversion devices, fuel cells are efficient devices [15–17] that are fueled by renewable fuels such as biohydrogen [18], biogas [19], or other biomass resources [20,21]; they have high potential to replace conventional energy conversion sysetms in several applications, such as water desalination [22,…”
BackgroundSelf-citationRezk, H., Sayed, E. T., Al-Dhaifallah, M., Obaid, M., El-Sayed, A. H. M., Abdelkareem, M. A., & Olabi, A. G. (2019) · Energy · doi:10.1016/j.energy.2019.02.167 · Cited by 236 · cited 1×
“Regarding energy conversion devices, fuel cells are efficient devices [15–17] that are fueled by renewable fuels such as biohydrogen [18], biogas [19], or other biomass resources [20,21]; they have high potential to replace conventional energy conversion sysetms in several applications, such as water desalination [22,…”
BackgroundSelf-citationFlywheel energy storage systems: Review and simulation for an isolated wind power system
Sebastián, R., & Peña Alzola, R. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.08.008 · Cited by 235
Recent progress in environmentally friendly geopolymers: A review
Shehata, N., Sayed, E. T., & Abdelkareem, M. A. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.143166 · Cited by 235 · cited 1×
“The severe environmental impact of fossil fuels, used in all aspects of our lives, is a serious threat, as is clear from the resulting health problems and climate change [1,2].”
BackgroundSelf-citationFlywheel energy storage—An upswing technology for energy sustainability
Liu, H., & Jiang, J. (2007) · Energy and Buildings · doi:10.1016/j.enbuild.2006.10.001 · Cited by 222 · cited 1×
“FESS can also compete with supercapacitors in short ‐ term storage applications in the seconds to minutes range [46,55–57].”
BackgroundActive Disturbance Rejection Control for a Flywheel Energy Storage System
Chang, X., Li, Y., Zhang, W., Wang, N., & Xue, W. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336607 · Cited by 198
Switched Reluctance Motor Modeling, Design, Simulation, and Analysis: A Comprehensive Review
Vijayakumar, K., Karthikeyan, R., Paramasivam, S., Arumugam, R., & Srinivas, K. N. (2008) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2008.2003334 · Cited by 195 · cited 1×
“environments, including at temperatures of 400 ◦C, still with a wide speed range [84].”
BackgroundElectromagnetic aircraft launch system-EMALS
Doyle, M. R., Samuel, D. J., Conway, T., & Klimowski, R. R. (1995) · IEEE Transactions on Magnetics · doi:10.1109/20.364638 · Cited by 179 · cited 1×
“They rotate at 64,000 rpm with a density of 28 kJ/kg [133].”
BackgroundReview of flywheel based energy storage systems
Pena-Alzola, R., Sebastián, R., Quesada, J., & Colmenar‐Santos, A. (2011) · International Conference on Power Engineering, Energy and Electrical Drives · doi:10.1109/powereng.2011.6036455 · Cited by 170 · cited 2×
“…storage needs [39,40], doing so without hazardous ma ‐ terials and offering very long lifetime (millions of full ‐ depth discharge cycles) [41], ease of production [42,43], use, and decommissioning [44], especially with the current increase in renewable energy applications, as shown in Figure 2.”
BackgroundAbdelkareem, M. A., Tanveer, W. H., Sayed, E. T., Assad, M. E. H., Allagui, A., & Cha, S. W. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.10.025 · Cited by 165 · cited 1×
“Regarding energy conversion devices, fuel cells are efficient devices [15–17] that are fueled by renewable fuels such as biohydrogen [18], biogas [19], or other biomass resources [20,21]; they have high potential to replace conventional energy conversion sysetms in several applications, such as water desalination [22,…”
BackgroundSelf-citationAbdelkareem, M. A., Wilberforce, T., Elsaid, K., Sayed, E. T., Abdelghani, E. A. M., & Olabi, A. G. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.08.250 · Cited by 156 · cited 1×
“Regarding energy conversion devices, fuel cells are efficient devices [15–17] that are fueled by renewable fuels such as biohydrogen [18], bio ‐ gas [19], or other biomass resources [20,21]; they have high potential to replace conven ‐ tional energy conversion sysetms in several applications, such…”
BackgroundSelf-citationWaste heat-driven desalination systems: Perspective
Olabi, A. G., Elsaid, K., Rabaia, M. K. H., Askalany, A. A., & Abdelkareem, M. A. (2020) · Energy · doi:10.1016/j.energy.2020.118373 · Cited by 151 · cited 1×
“To reduce the severe problems caused by the different fossil fuels, scientists have proposed different solutions, such as waste heat recycling [3,4], developing efficient energy conversion systems that have low or no environmental impact [5–7], transitioning from fossil fuel resources to renewable energy resources [8–…”
BackgroundSelf-citationEnergy storage systems towards 2050
Olabi, A. G., & Abdelkareem, M. A. (2021) · Energy · doi:10.1016/j.energy.2020.119634 · Cited by 151
Self-citationFuel cells for carbon capture applications
Abdelkareem, M. A., Lootah, M. A., Sayed, E. T., Wilberforce, T., Alawadhi, H., Yousef, B. A. A., & Olabi, A. G. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144243 · Cited by 148
Self-citationProposal and Analysis of a Novel Single-Drive Bearingless Motor
Asama, J., Hamasaki, Y., Takaaki, O. I. W. A., & Chibá, A. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2183840 · Cited by 144 · cited 1×
“To overcome these disadvantages, hybrid PM reluctance machines have been developed [123].”
MethodWicki, S., & Hansen, E. G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.132 · Cited by 143 · cited 1×
“This allows flexibility and control to rely more on renewable sources [31,35].”
BackgroundPFC Cuk Converter-Fed BLDC Motor Drive
Bist, V., & Singh, B. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309706 · Cited by 142 · cited 1×
“High efficiency, large operational speed range, compactness, mechanical stablility, low mainte ‐ nance, and operation without electromagnetic interference are the main ad ‐ vantages of a brushless direct current machine [78–83].”
BackgroundFlywheel technology: past, present, and 21st century projections
Bitterly, J. G. (1998) · IEEE Aerospace and Electronic Systems Magazine · doi:10.1109/62.707557 · Cited by 141 · cited 1×
“A flywheel’s ability to store energy is a well-established phenomenon [46].”
BackgroundDoucette, R. T., & McCulloch, M. D. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.08.100 · Cited by 139 · cited 1×
“FESS can also compete with supercapacitors in short ‐ term storage applications in the seconds to minutes range [46,55–57].”
BackgroundBearingless 300-W PMSM for Bioreactor Mixing
Reichert, T., Nußbaumer, T., & Kolar, J. W. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2126532 · Cited by 131 · cited 1×
“BM can be implemented in high ‐ speed FESS [122].”
BackgroundImproving the Integration of Wind Power Generation Into AC Microgrids Using Flywheel Energy Storage
Suvire, G. O., Molina, M. G., & Mercado, P. E. (2012) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2012.2208769 · Cited by 129 · cited 1×
“The flywheels made of composite materials permit high density, unlike the typical steel-based flywheels with low density [70].”
BackgroundStrasik, M., Johnson, P. E., Day, A. C., Mittleider, J. A., Higgins, M., Edwards, J., Schindler, J., McCrary, K. E., McIver, C. R., Carlson, D. L., et al. (2007) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2007.898065 · Cited by 123
Flywheel hybridization to improve battery life in energy storage systems coupled to RES plants
Barelli, L., Bidini, G., Bonucci, F., Castellini, L., Fratini, A., Gallorini, F., & Zuccari, A. (2019) · Energy · doi:10.1016/j.energy.2019.02.143 · Cited by 123 · cited 1×
“These modes of operation are dependent on the load angle [30–33].”
BackgroundProspects of Fuel Cell Combined Heat and Power Systems
Olabi, A. G., Wilberforce, T., Sayed, E. T., Elsaid, K., & Abdelkareem, M. A. (2020) · Energies · doi:10.3390/en13164104 · Cited by 122
Self-citationBoukettaya, G., & Krıchen, L. (2014) · Energy · doi:10.1016/j.energy.2014.04.039 · Cited by 115 · cited 1×
“FESS present a green alternative technology to traditional chemicalbased batteries for short-term storage needs [39,40], doing so without hazardous materials and offering very long lifetime (millions of full-depth discharge cycles) [41], ease of production [42,43], use, and decommissioning [44], especially with the cu…”
BackgroundMagnetically Levitated Slice Motors
Nußbaumer, T., Karutz, P., Zürcher, F., & Kolar, J. W. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2102731 · Cited by 114 · cited 1×
“Magnetic bearings use per ‐ manent magnets or magnetic fields from current ‐ carrying coils to stabilise the flywheel by supporting its weight [118,119].”
BackgroundWilberforce, T., Sayed, E. T., Abdelkareem, M. A., Elsaid, K., & Olabi, A. G. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2020.101737 · Cited by 111 · cited 1×
“Regarding energy conversion devices, fuel cells are efficient devices [15–17] that are fueled by renewable fuels such as biohydrogen [18], biogas [19], or other biomass resources [20,21]; they have high potential to replace conventional energy conversion sysetms in several applications, such as water desalination [22,…”
BackgroundSelf-citationChen, L., & Hofmann, W. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2163289 · Cited by 107 · cited 1×
“They are also used as auxiliary bearings as required [105,106].”
MethodAnalysis of a flywheel energy storage system for light rail transit
Rupp, A., Baier, H. J., Mertiny, P., & Secanell, M. (2016) · Energy · doi:10.1016/j.energy.2016.04.051 · Cited by 105 · cited 3×
“This allows flexibility and control to rely more on renewable sources [31,35].”
BackgroundKhzouz, M., Gkanas, E. I., Shao, J., Sher, F., Бегерський, Д. Б., El-Kharouf, A., & Qubeissi, M. A. (2020) · Energies · doi:10.3390/en13153783 · Cited by 102
The Status and Future of Flywheel Energy Storage
Pullen, K. R. (2019) · Joule · doi:10.1016/j.joule.2019.04.006 · Cited by 100
Lee, H., Shin, B., Han, S.-C., Jung, S.-Y., Park, B., & Jang, G. (2011) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2011.2180881 · Cited by 98
Wang, L., Yu, J., & Chen, Y.-T. (2011) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2010.0194 · Cited by 97 · cited 1×
“They are stoutly constructed, with low build cost, they suit high torque applications, and they are highly reliable [67,74].”
BackgroundNovel applications of the flywheel energy storage system
Suzuki, Y., Koyanagi, A., Kobayashi, M., & Shimada, R. (2004) · Energy · doi:10.1016/j.energy.2004.08.018 · Cited by 96
Development of Superconducting Magnetic Bearing for 300 kW Flywheel Energy Storage System
Mukoyama, S., Nakao, K., Sakamoto, H., Matsuoka, T., Nagashima, K., Ogata, M., Yamashita, T., MIYAZAKI, Y., Miyazaki, K., Maeda, T., et al. (2017) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2017.2652327 · Cited by 95 · cited 1×
“…superconductors (HTS) are in use with SMBs to combat this system requirement, and there have been recent attempts to incorporate cryo ‐ genic isolation for the SMBs to reduce costs and keep the operating temperatures low, but, at the moment, SMBs and PMBs need to be used at the same time [111,112].”
BackgroundNonlinear Feedback Control of a Bearingless Brushless DC Motor
Grabner, H., Amrhein, W., Silber, S., & Gruber, W. (2009) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2009.2014058 · Cited by 90 · cited 1×
“However, there is still a need for a complex control system and, therefore, this should not be considered in applications sus ‐ ceptible to electromagnetic interference [110].”
BackgroundFlywheel-Based Distributed Bus Signalling Strategy for the Public Fast Charging Station
Dragicevic, T., Sucic, S., Vasquez, J. C., & Guerrero, J. M. (2014) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2325963 · Cited by 87 · cited 1×
“However, rotors made from composite materials tend to break into numerous small fragments [125].”
BackgroundZhao, P., Wang, M., Wang, J., & Dai, Y. (2015) · Energy · doi:10.1016/j.energy.2015.03.067 · Cited by 86
Rotor position detection scheme for synchronous reluctance motor based on current measurements
Matsuo, T., & Lipo, T. A. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1994.345456 · Cited by 85 · cited 1×
“Saliency Double (Stator and Rotor) Single (Rotor) [96] Sensor Salient poles (Concentrated coil) Conventional AC machine [97] Rotor Salient poles Arrangement of internal flux guides [98] Winding Single tooth winding Poly phase distributed windings [99,100] Excitation Pulse DC voltage sequence Balanced sinusoidal curren…”
BackgroundMagnetic Equivalent Circuit Modeling of the AC Homopolar Machine for Flywheel Energy Storage
Severson, E. L., Nilssen, R., Undeland, T. M., & Mohan, N. (2015) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2015.2441040 · Cited by 84 · cited 1×
“# The HM shown in Figure 8 is also known as the homopolar inductor alternator and also the homopolar synchronous machine [86].”
BackgroundNew Concept for Flywheel Energy Storage System Using SMB and PMB
Subkhan, M., & Komori, M. (2011) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2010.2098470 · Cited by 83
Feasibility of a 100% Global Renewable Energy System
Moriarty, P., & Honnery, D. (2020) · Energies · doi:10.3390/en13215543 · Cited by 83
Sayed, E. T., Alawadhi, H., Elsaid, K., Olabi, A. G., Adel Almakrani, M., Bin Tamim, S. T., Alafranji, G. H. M., & Abdelkareem, M. A. (2020) · Sustainability · doi:10.3390/su12166538 · Cited by 81 · cited 1×
“Regarding energy conversion devices, fuel cells are efficient devices [15–17] that are fueled by renewable fuels such as biohydrogen [18], biogas [19], or other biomass resources [20,21]; they have high potential to replace conventional energy conversion sysetms in several applications, such as water desalination [22,…”
BackgroundSelf-citationSun, X., Koh, K., Yu, B., & Matsui, M. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2021679 · Cited by 76
Magnetic Bearing Sets for a Flywheel System
Sotelo, G. G., Junior, R. D. A., & Ferreira, A. C. (2007) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2007.899268 · Cited by 71 · cited 3×
“Electrical machine Permanent magnet synchronous machine (PMSM), induction machine Permanent magnet synchronous machine (PMSM) [58]”
MethodMagnetically Levitated Homopolar Hollow-Shaft Motor
Schneeberger, T., Nußbaumer, T., & Kolar, J. W. (2009) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2009.2018836 · Cited by 71
50-$\hbox{N}\cdot\hbox{m}$/2500-W Bearingless Motor for High-Purity Pharmaceutical Mixing
Warberger, B., Kaelin, R., Nußbaumer, T., & Kolar, J. W. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2161657 · Cited by 71
Energy Storage in the Emerging Era of Smart Grids
Carbone, R. (2011) · InTech eBooks · doi:10.5772/737 · Cited by 69
A comparative study between optimal metal and composite rotors for flywheel energy storage systems
Kale, V., & Secanell, M. (2018) · Energy Reports · doi:10.1016/j.egyr.2018.09.003 · Cited by 69 · cited 4×
“Material characteristics of hybrid composite flywheel [68,130,140]”
BackgroundMethodInfluentialAn Improved Control System for a Split Winding Bearingless Induction Motor
Rodriguez, E. F., & Santisteban, J. A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2087302 · Cited by 55 · cited 1×
“However, if active magnetic bearings are used, power is needed to energise them [116,117].”
BackgroundSayed, E. T., Abdelkareem, M. A., Alawadhi, H., Salameh, T. S. Z., Olabi, A. G., & Alami, A. H. (2020) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2020.10.019 · Cited by 54
Self-citationOptimization of composite flywheel design
Danfelt, E. L., Hewes, S. A., & Chou, T. (1977) · International Journal of Mechanical Sciences · doi:10.1016/0020-7403(77)90001-7 · Cited by 53 · cited 1×
“The outcome of exhaustion on the efficient performance of the various types of flywheel rotors over their anticipated lifespan can add to the selection of rotor materials and needs to be reviewed [68,147].”
BackgroundA Review of Flywheel Energy Storage Systems for Grid Application
Goris, F., & Severson, E. L. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591842 · Cited by 51 · cited 1×
“…achieved High capital cost, whether due to the materials’ cost for the light rotational mass, i.e., at high rpm, or for the magnetic bearing using heavy rotational masses High self ‐ discharge rate and low energy density [29] [47] [48] [49] [50,51] There are two classifications of speed rating:”
BackgroundAsami, K., Chibá, A., Rahman, M. A., Hoshino, T., & Nakajima, A. (2005) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2005.854933 · Cited by 50
High-Speed Kinetic Energy Buffer: Optimization of Composite Shell and Magnetic Bearings
Abrahamsson, J., Hedlund, M., Kamf, T., & Bernhoff, H. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2259782 · Cited by 50 · cited 1×
“The PMSM shown in Figure 4 is suitable for several applications, but it has a narrow optimum temperature range, and they are also expensive [65,69–71].”
BackgroundWang, X.-L., Zhong, Q.-C., Deng, Z.-Q., & Yue, S.-Z. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2161067 · Cited by 49 · cited 1×
“Permanent (Passive) magnetic bearing (PMB). o PMBs are permanent magnets (Figure 10) rather than electromagnetic so there ‐ fore are used with other bearing types as they are unable to sufficiently dampen movement on all axes [104].”
BackgroundAbdel-Khalik, A. S., Elserougi, A. A., Massoud, A. M., & Ahmed, S. (2012) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2012.2198926 · Cited by 49 · cited 2×
“# The induction machine shown in Figure 5 should be considered the best allround choice for high-power installations [73].”
BackgroundMethodSynchronous reluctance motor technology: industrial opportunities, challenges and future direction
Donaghy‐Spargo, C. (2016) · Engineering & Technology Reference · doi:10.1049/etr.2015.0044 · Cited by 49
High-Performance Control of a DC–DC Z-Source Converter Used for an Excitation Field Driver
Amodeo, S. J., Chiacchiarini, H. G., & Oliva, A. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2176751 · Cited by 47 · cited 2×
“When the energy is needed, the flywheel can then transfer the kinetic energy back to electrical energy via the machine [128].”
BackgroundMethodNagashima, K., Seino, H., Sakai, N., & Murakami, M. (2009) · Physica C Superconductivity · doi:10.1016/j.physc.2009.05.245 · Cited by 46
Analysis of Electromechanical Interactions in a Flywheel System With a Doubly Fed Induction Machine
Ran, L., Xiang, D., & Kirtley, J. L. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2127436 · Cited by 46
Composite flywheel material design for high-speed energy storage
Conteh, M. A., & Nsofor, E. C. (2016) · Journal of Applied Research and Technology · doi:10.1016/j.jart.2016.04.005 · Cited by 46 · cited 4×
“The properties of the three materials in a hybrid composite flywheel are shown in Table 7 (adapted from [140]) below.”
BackgroundMethodInfluentialGurumurthy, S. R., Agarwal, V., & Sharma, A. (2013) · IET Electric Power Applications · doi:10.1049/iet-epa.2013.0134 · Cited by 44
Low Cost Flywheel Energy Storage for a Fuel Cell Powered Transit Bus
Hearn, C. S., Flynn, M. M., Lewis, M., Thompson, R. C., Murphy, B., & Longoria, R. G. (2007) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2007.4544239 · Cited by 44
On the development of flywheel storage systems for power system applications: A survey
Daoud, M., Abdel-Khalik, A. S., Massoud, A. M., Ahmed, S., & Abbasy, N. H. (2012) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2012.6350175 · Cited by 44
Design of a High-speed Superconducting Bearingless Machine for Flywheel Energy Storage Systems
Li, W., Chau, K. T., Ching, T. W., Wang, Y., & Chen, M. (2014) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2014.2367008 · Cited by 41 · cited 1×
“The homopolar machine is well built with low idle losses and suits long-term high-speed applications due to its reliability [87].”
BackgroundRastegarzadeh, S., Mahzoon, M., & Mohammadi, H. (2020) · Energy · doi:10.1016/j.energy.2020.118092 · Cited by 40
Homopolar 2-Pole Radial Permanent-Magnet Biased Magnetic Bearing With Low Rotating Loss
Fang, J., Wang, X., Wei, T., Tang, E., & Yahong, F. (2012) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2012.2192131 · Cited by 39 · cited 1×
“This motor utilises a single winding to generate torque in the absence of permanent magnets [89,90].”
BackgroundSuspension force model for bearingless AC homopolar machines designed for flywheel energy storage
Severson, E. L., Nilssen, R., Undeland, T. M., & Mohan, N. (2013) · IEEE GCC Conference and Exhibition (GCCCE) · doi:10.1109/ieeegcc.2013.6705789 · Cited by 39 · cited 1×
“This motor utilises a single winding to generate torque in the absence of permanent magnets [89,90].”
BackgroundMeinert, M., Prenleloup, P., Schmid, S., & Palacín, R. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.05.015 · Cited by 38 · cited 3×
“The hybrid composite is made of three layers: the inner layer, which is aluminum alloy 7075; the middle layer is a softer composite of epoxy/glass, and the outer layer is high ‐ strength composite T300/2500 [129,130].”
BackgroundKailasan, A., Dimond, T., Allaire, P. E., & Sheffler, D. (2014) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4028575 · Cited by 38
Ooshima, M., Kitazawa, S., Chibá, A., Fukao, T., & Dorrell, D. G. (2006) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2006.879071 · Cited by 38
Boukettaya, G., Krıchen, L., & Ouali, A. (2009) · Energy · doi:10.1016/j.energy.2009.09.003 · Cited by 37 · cited 1×
“Better control systems are another important recent breakthrough in the develop ‐ ment of FESS [32,36–38].”
BackgroundForce and torque characteristics for a slotless Lorentz self-bearing servomotor
Stephens, L. S., & Kim, D. (2002) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2002.1017769 · Cited by 37 · cited 2×
“Magnetic bearings do not come into contact with the rotor; they have low loss, no wear out, and no lubrication is required [114,115].”
BackgroundDesign of magnetic flywheel control for performance improvement of fuel cells used in vehicles
Huang, C.-N., & Chen, Y.-S. (2016) · Energy · doi:10.1016/j.energy.2016.10.112 · Cited by 37 · cited 1×
“FESS present a green alternative technology to traditional chemicalbased batteries for short-term storage needs [39,40], doing so without hazardous materials and offering very long lifetime (millions of full-depth discharge cycles) [41], ease of production [42,43], use, and decommissioning [44], especially with the cu…”
BackgroundDesign of Motor/Generator for Flywheel Batteries
Bianchini, C., Torreggiani, A., David, D., & Bellini, A. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3026292 · Cited by 37
Wang, Y., Wang, C., & Xue, H. (2021) · Electric Power Systems Research · doi:10.1016/j.epsr.2021.107185 · Cited by 36
Review of flywheel based internal combustion engine hybrid vehicles
Dhand, A., & Pullen, K. R. (2013) · International Journal of Automotive Technology · doi:10.1007/s12239-013-0088-x · Cited by 35 · cited 2×
“This also increases the batteries’ lifetime [54].”
BackgroundAnalytical Techniques for Designing Riding Quality Into Automotive Vehicles
Deusen, B. D. V. (1967) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/670021 · Cited by 34
Flywheel rotor manufacture for rural energy storage in sub-Saharan Africa
Okou, R., Sebitosi, A. B., & Pillay, P. (2011) · Energy · doi:10.1016/j.energy.2011.07.051 · Cited by 33 · cited 1×
“FESS present a green alternative technology to traditional chemicalbased batteries for short-term storage needs [39,40], doing so without hazardous materials and offering very long lifetime (millions of full-depth discharge cycles) [41], ease of production [42,43], use, and decommissioning [44], especially with the cu…”
BackgroundEnergy characteristics of a fixed-speed flywheel energy storage system with direct grid-connection
Kondoh, J., Funamoto, T., Nakanishi, T., & Arai, R. (2018) · Energy · doi:10.1016/j.energy.2018.09.197 · Cited by 31 · cited 2×
“In solar systems, FESS is being introduced to prolong the battery storage life that already exists by using the energy stored in the FESS first, so the batteries’ workload should be drastically reduced, thereby improving the battery lifespan [34].”
BackgroundGrant, C. A., Garcia, J., & Hicks, A. (2020) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2020.100723 · Cited by 31 · cited 1×
“These smaller companies could use lead alloys and cast iron, but these choices are limited in terms of speed [142].”
BackgroundKarrari, S., Noë, M., & Geisbuesch, J. (2018) · IEEE International Conference on Intelligent Energy and Power Systems (IEPS) · doi:10.1109/ieps.2018.8559521 · Cited by 30
Wang, Q., Liu, C., Zou, J., Fu, X., & Zhang, J. (2013) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2013.2243847 · Cited by 29
Johnson, B. R., Columbro, F., Araujo, D., Limon, M., Smiley, B., Jones, G., Reichborn-Kjennerud, B., Miller, A., & Gupta, S. K. (2017) · Review of Scientific Instruments · doi:10.1063/1.4990884 · Cited by 29 · cited 1×
“…superconductors (HTS) are in use with SMBs to combat this system requirement, and there have been recent attempts to incorporate cryo ‐ genic isolation for the SMBs to reduce costs and keep the operating temperatures low, but, at the moment, SMBs and PMBs need to be used at the same time [111,112].”
BackgroundLiu, S., Li, W., Zheng, G., Yang, H., & Li, L. (2020) · Energies · doi:10.3390/en13153848 · Cited by 28 · cited 1×
“Regarding energy conversion devices, fuel cells are efficient devices [15–17] that are fueled by renewable fuels such as biohydrogen [18], biogas [19], or other biomass resources [20,21]; they have high potential to replace conventional energy conversion sysetms in several applications, such as water desalination [22,…”
BackgroundComparison of Voltage-Source Inverter Topologies for Two-Phase Bearingless Slice Motors
Bartholet, M. T., Nußbaumer, T., & Kolar, J. W. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2054050 · Cited by 27 · cited 2×
“Magnetic bearings do not come into contact with the rotor; they have low loss, no wear out, and no lubrication is required [114,115].”
BackgroundGeneral Design Method of Flywheel Rotor for Energy Storage System
Han, Y., Ren, Z., & Tong, Y. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.01.059 · Cited by 25
Outer-rotor ac homopolar motors for flywheel energy storage
Severson, E. L., Mohan, N., Nilssen, R., & Undeland, T. M. (2014) · IET International Conference on Power Electronics, Machines and Drives (PEMD) · doi:10.1049/cp.2014.0345 · Cited by 25 · cited 1×
“There is a reduction in the self-discharge rate using this technology, hence increasing efficiency as well as energy density [88].”
BackgroundA Lab-scale Flywheel Energy Storage System: Control Strategy and Domestic Applications
Elbouchikhi, E., Amirat, Y., Feld, G., Benbouzid, M., & Zhou, Z. (2020) · Energies · doi:10.3390/en13030653 · Cited by 25 · cited 1×
“The excess energy produced by other renewables can be stored and released on ‐ demand, with guaranteed wear and tear over 25 years and an efficiency of 90% [136,137].”
BackgroundZhang, Z., Zhang, Y., Sui, X., Li, W., & Xu, D. (2020) · Energies · doi:10.3390/en13215542 · Cited by 25 · cited 1×
“To reduce the severe problems caused by the different fossil fuels, scientists have proposed different solutions, such as waste heat recycling [3,4], developing efficient energy conversion systems that have low or no environmental impact [5–7], transitioning from fossil fuel resources to renewable energy resources [8–…”
BackgroundOptimum design of hybrid composite multi-ring flywheel rotor based on displacement method
Wen, S., & Jiang, S. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.03.007 · Cited by 24 · cited 1×
“For a composite rim, the failure criteria are Tsai ‐ Wu, Tsai ‐ Hill, Hoffman, and Maxi ‐ mum failure [145].”
BackgroundDesign and analysis of a novel wound rotor for a bearingless induction motor
Yang, Z., Ding, Q., Sun, X., Ji, J., & Zhao, Q. (2019) · International Journal of Electronics · doi:10.1080/00207217.2019.1625971 · Cited by 24 · cited 1×
“However, if active magnetic bearings are used, power is needed to energise them [116,117].”
BackgroundBearing Loads in a Vehicular Flywheel Battery
Murphy, B., Bresie, D. A., & Beno, J. H. (1997) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/970213 · Cited by 23
Sliding mode control of reaction flywheel-based brushless DC motor with buck converter
Liu, G., & Zhang, C. (2013) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2013.04.038 · Cited by 21 · cited 1×
“Brushless DC machine with flywheel adopted from [78].”
MethodSelection of Magnetic Materials for Bearingless High-Speed Mobile Flywheel Energy Storage Systems
Recheis, M., Schweighofer, B., Fulmek, P. L., & Wegleiter, H. (2014) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2013.2291938 · Cited by 20
Cansız, A., Yildizer, İ., Oral, E. A., & Kaya, Y. (2013) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2013.2280033 · Cited by 20 · cited 2×
“Therefore, it is recommended that composite materials are used for high-speed flywheels, and steel is used for low-speed flywheels [67,68].”
BackgroundDesign and analysis of passive homopolar null flux bearings
DAVEY, K. R., Filatov, A. V., & Thompson, R. C. (2005) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2004.841703 · Cited by 20 · cited 1×
“They are also ideal for industrial blowers, hole pumps, etc. [91].”
BackgroundGumbarević, S., Dunović, I. B., Milovanović, B., & Gaši, M. (2020) · Energies · doi:10.3390/en13205519 · Cited by 17
Performance Analysis of Synchronous Reluctance Motor with Limited Amount of Permanent Magnet
Ngo, D., & Hsieh, M. (2019) · Energies · doi:10.3390/en12183504 · Cited by 15 · cited 1×
“Saliency Double (Stator and Rotor) Single (Rotor) [96] Sensor Salient poles (Concentrated coil) Conventional AC machine [97] Rotor Salient poles Arrangement of internal flux guides [98] Winding Single tooth winding Poly phase distributed windings [99,100] Excitation Pulse DC voltage sequence Balanced sinusoidal curren…”
BackgroundOn fault tolerance increase of switched reluctance machines
Szabó, L., & Ruba, M. (2009) · IEEE EUROCON - International Conference on Computer as a Tool (EUROCON) · doi:10.1109/eurcon.2009.5167715 · Cited by 13 · cited 1×
“Saliency Double (Stator and Rotor) Single (Rotor) [96] Sensor Salient poles (Concentrated coil) Conventional AC machine [97] Rotor Salient poles Arrangement of internal flux guides [98] Winding Single tooth winding Poly phase distributed windings [99,100] Excitation Pulse DC voltage sequence Balanced sinusoidal curren…”
BackgroundA comparison of switched reluctance rotor structures
Davis, R. M. (1988) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.9174 · Cited by 13 · cited 1×
“Saliency Double (Stator and Rotor) Single (Rotor) [96] Sensor Salient poles (Concentrated coil) Conventional AC machine [97] Rotor Salient poles Arrangement of internal flux guides [98] Winding Single tooth winding Poly phase distributed windings [99,100] Excitation Pulse DC voltage sequence Balanced sinusoidal curren…”
BackgroundMultiple coupled circuit modeling of synchronous reluctance machines
Luo, X., El-Antably, A., & Lipo, T. A. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1994.377481 · Cited by 12 · cited 1×
“Saliency Double (Stator and Rotor) Single (Rotor) [96] Sensor Salient poles (Concentrated coil) Conventional AC machine [97] Rotor Salient poles Arrangement of internal flux guides [98] Winding Single tooth winding Poly phase distributed windings [99,100] Excitation Pulse DC voltage sequence Balanced sinusoidal curren…”
BackgroundBrauer, H. J., & Doncker, R. W. D. (2012) · EPE Journal · doi:10.1080/09398368.2012.11463820 · Cited by 11 · cited 1×
“Current excitation on the stator side for this type of machine is used with a flywheel [92,93].”
MethodHybrid Train Power with Diesel Locomotive and Slug Car–Based Flywheels for NOx and Fuel Reduction
Wang, Z., Palazzolo, A., & Park, J. (2012) · Journal of Energy Engineering · doi:10.1061/(asce)ey.1943-7897.0000081 · Cited by 11 · cited 3×
“The hybrid composite is made of three layers: the inner layer, which is aluminum alloy 7075; the middle layer is a softer composite of epoxy/glass, and the outer layer is high ‐ strength composite T300/2500 [129,130].”
BackgroundInfluentialPower Electronics Handbook, Third Edition (Rashid, M.H.; 2011) [Book News]
Silva, J. F. (2011) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2011.941117 · Cited by 10
Modeling and Control of a Flywheel Energy Storage System Using Active Magnetic Bearing for Vehicle
Ren, M., Shen, Y., Li, Z.-Z., & NONAMI, K. (2009) · International Conference on Information Engineering and Computer Science · doi:10.1109/iciecs.2009.5364972 · Cited by 10 · cited 2×
“The main component of the technology, which is the flywheel, has, over the years, supported the smooth running of machines [60].”
BackgroundPROCEEDINGS -- FLYWHEEL TECHNOLOGY SYMPOSIUM, 1975
Stone, R. G. (1976) · Cited by 9
Guidelines for Dynamic Data Acquisition and Analysis
Piersol, A. G. (1992) · Journal of the IEST · doi:10.17764/jiet.2.35.5.y67p77t461064052 · Cited by 9
A new energy storage system based on flywheel
Wu, J., Wen, J., & Sun, H. (2009) · IEEE Power Engineering Society General Meeting · doi:10.1109/pes.2009.5275460 · Cited by 9 · cited 1×
“They do not suit high ‐ speed applications [75], although double ‐ fed induction ma ‐ chines (DFIM) are in development to overcome this limitation [76,77].”
BackgroundSefidari, H., Lindblom, B., Nordin, L., & Wiinikka, H. (2020) · Energies · doi:10.3390/en13205386 · Cited by 7 · cited 1×
“…scientists have proposed different solutions, such as waste heat recycling [3,4], developing efficient energy conver ‐ sion systems that have low or no environmental impact [5–7], transitioning from fossil fuel resources to renewable energy resources [8–10], and, finally, CO 2 capture [11–14].”
BackgroundBernard, N., Ahmed, H. B., & Multon, B. (2002) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2001.939330 · Cited by 6
A flywheel-based distributed control strategy for grid congestion at domestic level
Elbouchikhi, E., Feld, G., Amirat, Y., & Benbouzid, M. (2020) · International Conference on Electrical and Information Technologies · doi:10.1109/iceit48248.2020.9113226 · Cited by 6
Adaptive Forced Balancing for Multivariable Systems
Beale, S., Shafai, B., LaRocca, P., & Cusson, E. (1993) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.23919/acc.1993.4793273 · Cited by 5
Aerodynamic heating of high-speed flywheels in low-density environments
Baer, M. R. (1978) · NASA STI/Recon Technical Report N · Cited by 5
Bearingless AC Homopolar Machine Design and Control for Distributed Flywheel Energy Storage
Severson, E. L. (2015) · University of Minnesota Digital Conservancy (University of Minnesota) · Cited by 4
Analysis of Electromechanical Interactions in a Flywheel System with a Doubly Fed Induction Machine
Ran, L., Xiang, D., & Kirtley, J. L. (2010) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2010.5615696 · Cited by 3 · cited 1×
“They do not suit high-speed applications [75], although doublefed induction machines (DFIM) are in development to overcome this limitation [76,77].”
BackgroundEnergy Storage in the United States
McMahon, R., & Infante, L. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-809592-8.00021-4 · Cited by 3 · cited 1×
“An indication of the increase in renewable energy sources, adapted from [45].”
BackgroundResearch progress of energy storage composite flywheel
Wang, C., Xingjian, D., Wang, Y., Xi, L., & Guobin, Z. (2017) · Energy Storage Science and Technology · doi:10.12028/j.issn.2095-4239.2017.0059 · Cited by 3 · cited 1×
“The composite flywheels are designed to carry high speeds as well as rotational stress thresholds compared to steel-based ones [65,66].”
BackgroundVirtual Balancing of Rotors Supported by Magnetic Bearings
Chen, H. M., & Ku, C.-P. R. (1991) · ASME Biennial Conference on Mechanical Vibration and Noise · doi:10.1115/detc1991-0230 · Cited by 3
Deterministically – Probabilistic Approach for Determining the Steels Elasticity Modules
Popov, A., & Klitcheva, G. (2015) · Journal of theoretical and applied mechanics · doi:10.1515/jtam-2015-0007 · Cited by 1
Research works printed but not linked: 7
- Pust, 2007, Oscillations of rotor supported on magnetic bearings with impacts in retainer bearings, J. Theor. Appl. Mech., 45, 99
- Gyugyi, L., and Pelly, B.R. (1976). Static Power Frequency Changers: Theory, Performance, and Application, John Wiley & Sons.
- Lokke, B. (1996). Industrial Ecology: A Collection of Articles from Science and Technology Review, Diane Publishing.
- Harris, C.M., and Crede, C.E. (1976). Shock and Vibration Handbook, McGraw-Hill. [2nd ed.].
- Vance, J.M. (1988). Rotordynamics of Turbomachinery, John Wiley & Sons.
- Den Hartog, J. (1956). Chapter 7: Self-excited vibrations. Mechanical Vibrations, McGraw-Hill. [4th ed.].
- Marion, J.B. (2013). Classical Dynamics of Particles and Systems, Academic Press.
Cited by
Energy storage systems: a review
Mitali, J., Dhinakaran, S., & Mohamad, A. A. (2022) · Energy Storage and Saving · doi:10.1016/j.enss.2022.07.002 · Cited by 911
Renewable Energy and Energy Storage Systems
Sayed, E., Olabi, A., Alami, A., Radwan, A., Mdallal, A., Rezk, A., & Abdelkareem, M. (2023) · Energies · doi:10.3390/en16031415 · Cited by 596
Self-citationAmir, M., Deshmukh, R. G., Khalid, H. M., Said, Z., Raza, A., Muyeen, S. M., Nizami, A.-S., Elavarasan, R. M., Saidur, R., & Sopian, K. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108694 · Cited by 580
Worku, M. Y. (2022) · Sustainability · doi:10.3390/su14105985 · Cited by 286
Choudhury, S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.103966 · Cited by 283
Metadata
- Authors
- Olabi, A. G., Wilberforce, T., Abdelkareem, M. A., & Ramadan, M.
- Affiliations
- Aston University (GB)
- University of Sharjah (AE)
- International University of Beirut (LB)
- Corresponding author
- Olabi, Abdul Ghani
- Wilberforce, Tabbi
- Venue
- Energies
- Publisher
- MDPI AG
- Published
- 2021-04-13
- Volume
- 14
- Issue
- 8
- Pages
- 2159
- ISSN
- 1996-1073 (ISSN-L)
- OpenAlex
- W3153862357
- Semantic Scholar
- 581ba8d2b1ba651de46fcb06765d715372d9d48b
- Cited by
- 215
- References
- 147
- Citations by year
- 2026: 31 · 2025: 42 · 2024: 40 · 2023: 41 · 2022: 42 · 2021: 18
- FWCI
- 15.66
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Energies (publishedVersion, cc-by)
- Aston Publications Explorer (Aston University) (acceptedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Greater South Information System
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Magnetic Bearings and Levitation Dynamics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Keywords
- flywheel energy storage, permanent magnet synchronous motor, induction motor, brushless DC machines, homopolar machines, active magnetic levitation, grid-scale energy storage, vehicle energy storage, production cost reduction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.