The DOI matches its Crossref record; 97 of the 98 references it cites were found in a registry or an index, and 1 are not checked yet.
Industrial Hemp Fibers: An Overview
Open accessAbstract
Industrial hemp (Cannabis sativa) is one of the most available and widely produced bast fibers with high cellulose content. Interest in these fibers is warranted due to environmental protection challenges as well as their inherent properties such as low density, high specific strength, and stiffness. In addition, advanced research and progress have gone into increasing their mechanical performance through surface treatments and in the development of new materials. The most promising application for hemp fibers is as reinforcement in polymeric composites or through hybridization. Nonetheless, more research is needed to improve their properties and expand their range of applications. The biodegradability issue is one problem that must be addressed when considering long life-cycle applications as the reproducibility of these composites’ final properties. This review is a comprehensive literature review on hemp fibers. It includes hemp fibers’ chemical and mechanical properties, surface modifications, hybrid composites, as well as current and future applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“It is composed of 70% to 75% cellulose, 15% to 20% hemicellulose, 3% to 5% lignin, 0.8% pectin, 2% to 6% extractives, and 1% to 2% ash content (Manaia et al. 2019; Möller and Popescu 2009; Zheljazkov et al. 2023).”
From A critical review of industrial fiber hemp anatomy, agronomic practices, and valorization into sustainable bioproducts (2025) · cites this paper as Manaia et al. 2019
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Hemp bast fibers are regarded as the strongest and longest natural fiber, and they are cheaper to manufacture, and last far longer than materials such as cotton (Cherney and Small 2016; Manaia et al. 2019; Rehman et al. 2021).”
From A critical review of industrial fiber hemp anatomy, agronomic practices, and valorization into sustainable bioproducts (2025) · cites this paper as Manaia et al. 2019
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,600
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
Joshi, S., Drzal, L. T., Mohanty, A. K., & Arora, S. (2003) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,342
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H. S., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,310
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,175
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
Mwaikambo, L. Y., & Ansell, M. P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10460 · Cited by 1,725
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,663
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Research works printed but not linked: 1
- Brosius, 2006, Natural Fiber Composites Slowly Take Root, Compos. Technol., 12, 32
Cited by
Sorted by citations
Crini, G., Lichtfouse, E., Chanet, G., & Morin-Crini, N. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01029-2 · Cited by 396
Hemp as a potential raw material toward a sustainable world: A review
Ahmed, A. T. M. F., Islam, M. Z., Mahmud, M. S., Sarker, M. E., & Islam, M. R. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e08753 · Cited by 320
Rahaman, M. T., Pranta, A. D., Repon, M. R., Ahmed, M. S., & Islam, T. (2024) · Journal of Open Innovation Technology Market and Complexity · doi:10.1016/j.joitmc.2024.100280 · Cited by 188
Recent progress in natural fiber reinforced composite as sound absorber material
Mohammadi, M., Taban, E., Tan, W., Din, N. B. C., Putra, A., & Berardi, U. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.108514 · Cited by 134
Apetroaei, V. T., Pricop, E. M., Istrati, D. I., & Vizireanu, C. (2024) · Molecules · doi:10.3390/molecules29092097 · Cited by 104
Performance of Sisal/Hemp Bio-based Epoxy Composites Under Accelerated Weathering
Krishnasamy, S., Ungtrakul, T., Muthukumar, C., Kumar, T. S. M., Rajini, N., Siengchin, S., Pulikkalparambil, H., Parameswaranpillai, J., & Ayrılmış, N. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01904-7 · Cited by 87
Sound Absorption of Hemp Fibers (Cannabis Sativa L.) Based Nonwoven Fabrics and Composites: A Review
Liao, J., Zhang, S., & Tang, X. (2020) · Journal of Natural Fibers · doi:10.1080/15440478.2020.1764453 · Cited by 83
Characterisation of Hemp Fibres Reinforced Composites Using Thermoplastic Polymers as Matrices
Stelea, L., Filip, I., Lisă, G., Ichim, M., Drobotă, M., Sava, C., & Mureșan, A. (2022) · Polymers · doi:10.3390/polym14030481 · Cited by 76
Advancement in hemp fibre polymer composites: a comprehensive review
Deshmukh, G. S. (2022) · Journal of Polymer Engineering · doi:10.1515/polyeng-2022-0033 · Cited by 75
Ryłko, I., Komala, W., & Białowiec, A. (2022) · Materials · doi:10.3390/ma15124078 · Cited by 72
Bambach, M. R. (2020) · Fibers · doi:10.3390/fib8100062 · Cited by 69
Experimental investigation of hemp fiber hybrid composite material for automotive application
Nachippan, N. M., Alphonse, M., Raja, V. K. B., Shasidhar, S., TEJA, G., & Reddy, R. H. N. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.10.798 · Cited by 66
Mechanical, Thermal, and Acoustic Properties of Hemp and Biocomposite Materials: A Review
Dahal, R. K., Acharya, B., & Dutta, A. (2022) · Journal of Composites Science · doi:10.3390/jcs6120373 · Cited by 65
Müssig, J., Amaducci, S., Bourmaud, A., Beaugrand, J., & Shah, D. U. (2020) · Composites Part C Open Access · doi:10.1016/j.jcomc.2020.100010 · Cited by 64
Introduction to composite materials
Dhakal, H. N., & Ismail, S. O. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818316-8.00001-3 · Cited by 63
Natural-Fiber-Reinforced Polymer Composites for Furniture Applications
Ichim, M., Mureşan, E. I., & Codău, E. (2024) · Polymers · doi:10.3390/polym16223113 · Cited by 62
Hemp: From Field to Fiber—A Review
Mariz, J. V. M., Guise, C., Silva, T. L., Rodrigues, L., & Silva, C. (2024) · Textiles · doi:10.3390/textiles4020011 · Cited by 61
The Emerging Hemp Industry: A Review of Industrial Hemp Materials and Product Manufacturing
Enarevba, D. R., & Haapala, K. R. (2024) · AgriEngineering · doi:10.3390/agriengineering6030167 · Cited by 57
Antimicrobial Properties of Plant Fibers
Zamora-Mendoza, L., Guamba, E., Miño, K., Guambo, M. P. R., Levoyer, A., Álvarez-Barreto, J. F., Machado, A., & Alexis, F. (2022) · Molecules · doi:10.3390/molecules27227999 · Cited by 60
Bokhari, S. M. Q., Chi, K., & Catchmark, J. M. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113818 · Cited by 54
Towards sustainable building solutions: Development of hemp shiv-based green insulation material
Martínez, B., Mendizábal, V., Roncero, M. B., Bernat-Masó, E., & Gil, L. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.134987 · Cited by 56
Fiber Selection for Reinforced Additive Manufacturing
Beckman, I. P., Lozano, C., Freeman, E. L., & Riveros, G. A. (2021) · Polymers · doi:10.3390/polym13142231 · Cited by 53
Applications and Properties of Hemp Stalk-Based Insulating Biomaterials for Buildings: Review
Martínez, B., Bernat-Masó, E., & Gil, L. (2023) · Materials · doi:10.3390/ma16083245 · Cited by 52
Hemp fiber and its bio-composites: a comprehensive review part I—characteristics and processing
Shelly, D., Lee, S., & Park, S. (2025) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-025-01314-0 · Cited by 49
Oh, E., Zúniga, M. M. G., Nguyen, T., Kim, B.-H., Tien, T. T., & Suhr, J. (2024) · Advanced Composite Materials · doi:10.1080/09243046.2024.2348237 · Cited by 49
Osman, Z., Elamin, M., Ghorbel, E., & Charrier, B. (2025) · Polymers · doi:10.3390/polym17070844 · Cited by 46
Venkataravanappa, R. Y., Lakshmikanthan, A., Kapilan, N., Chandrashekarappa, M. P. G., Der, O., & Erçetin, A. (2023) · Journal of Composites Science · doi:10.3390/jcs7070266 · Cited by 45
The Role of Natural Fibers in the Building Industry—The Perspective of Sustainable Development
Bąk, A. (2025) · Materials · doi:10.3390/ma18163803 · Cited by 47
Islam, S., & Hasan, B. (2024) · SPE Polymers · doi:10.1002/pls2.10167 · Cited by 43
Tabet, Z., Belaadi, A., Boumaaza, M., & Bourchak, M. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07679-y · Cited by 43
Bheel, N., Kumar, S., Kırgız, M. S., Ali, M., Almujibah, H. R., Ahmad, M., & González‐Lezcano, R. A. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e24313 · Cited by 42
Barbière, R., Touchard, F., Chocinski‐Arnault, L., & Mellier, D. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105593 · Cited by 42
A Novel Composite of Hemp Fiber and Alginate Hydrogel for Wound Dressings
Ahmad, F., Mushtaq, B., Ahmad, S., Rasheed, A., & Nawab, Y. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02756-7 · Cited by 41
Ahmed, B., Gwon, J., Thapaliya, M., Adhikari, A., Ren, S., & Wu, Q. (2023) · Cellulose · doi:10.1007/s10570-023-05081-3 · Cited by 41
Tutek, K., & Masek, A. (2022) · Materials · doi:10.3390/ma15072565 · Cited by 41
Valorization of Hemp Hurds as Bio-Sourced Additives in PLA-Based Biocomposites
Momeni, S., Safder, M., Khondoker, M. A. H., & Elias, A. L. (2021) · Polymers · doi:10.3390/polym13213786 · Cited by 40
Manaia, J. P., & Manaia, A. (2021) · Polymers · doi:10.3390/polym13101638 · Cited by 40
Self-citationManaila, E. N., Craciun, G. D., & Ighigeanu, D. I. (2020) · Polymers · doi:10.3390/polym12112437 · Cited by 39
Tupčiauskas, R., Rizhikovs, J., Brazdausks, P., Fridrihsone, V., & Andžs, M. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113717 · Cited by 39
Protein extraction from cold‐pressed hempseed press cake: From laboratory to pilot scale
Helstad, A., Forsén, E., Ahlström, C., Labba, I. M., Sandberg, A., Rayner, M., & Purhagen, J. (2021) · Journal of Food Science · doi:10.1111/1750-3841.16005 · Cited by 38
Ansari, H., Tabish, M., & Zaheer, M. M. (2024) · Next Sustainability · doi:10.1016/j.nxsust.2024.100075 · Cited by 38
Production of Particleboard Using Various Particle Size Hemp Shives as Filler
Zvirgzds, K., Kirilovs, E., Kukle, S., & Gross, U. (2022) · Materials · doi:10.3390/ma15030886 · Cited by 38
Khan, S. H., Rahman, M. Z., Haque, M. R., & Hoque, M. E. (2023) · Composites science and technology · doi:10.1007/978-981-99-2473-8_1 · Cited by 37
Evaluation of Wood Composite Sandwich Panels as a Promising Renewable Building Material
Mohammadabadi, M., Yadama, V., & Dolan, J. D. (2021) · Materials · doi:10.3390/ma14082083 · Cited by 36
Systematics and Botanical Characteristics of Industrial Hemp Cannabis Sativa L
Strzelczyk, M., Lochynska, M., & Chudy, M. (2022) · Journal of Natural Fibers · doi:10.1080/15440478.2021.1889443 · Cited by 35
Experimental Study on the Effect of Hemp Fiber on Mechanical Properties of Stabilized Clayey Soil
Kalkan, E., Kartal, H. O., & Kalkan, O. F. (2022) · Journal of Natural Fibers · doi:10.1080/15440478.2022.2068725 · Cited by 35
3D strain fields in a plant fibre composite during fragmentation test: Micro-CT based DIC and DVC
Drouhet, Q., Touchard, F., Chocinski‐Arnault, L., & Mellier, D. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110860 · Cited by 35
Siouta, L., Apostolopoulou, M., & Bakolas, A. (2024) · Sustainability · doi:10.3390/su162310368 · Cited by 34
Rana, S. S., & Gupta, M. K. (2020) · Polymer Composites · doi:10.1002/pc.25791 · Cited by 33
Dalle Vacche, S., Karunakaran, V., Patrucco, A., Zoccola, M., Douard, L., Ronchetti, S., Gallo, M., Schreier, A., Leterrier, Y., Bras, J., et al. (2021) · Molecules · doi:10.3390/molecules26164723 · Cited by 32
Industrial Hemp As a Multi-Purpose Crop: Last Achievements and Research in 2018−2023
Dudziec, P., Warmiński, K., & Stolarski, M. J. (2024) · Journal of Natural Fibers · doi:10.1080/15440478.2024.2369186 · Cited by 32
Stelescu, M. D., Manaila, E. N., Georgescu, M., & Niţuică, M. (2020) · Materials · doi:10.3390/ma13092067 · Cited by 31
Gioffrè, M., Vincenzini, A., Cavalagli, N., Gusella, V., Caponero, M., Terenzi, A., & Pepi, C. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124969 · Cited by 31
Determination of optimum blast furnace slag ash and hemp fiber ratio in cement mortars
Filazi, A., Tortuk, S., & Pul, M. (2023) · Structures · doi:10.1016/j.istruc.2023.105024 · Cited by 31
Boroujeni, F. M., Fioravanti, G., & Kander, R. (2024) · Materials · doi:10.3390/ma17020526 · Cited by 30
Natural Fiber Composites: A Comprehensive Review on Machine Learning Methods
Mulenga, T. K., Rangappa, S. M., & Siengchin, S. (2025) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-025-10273-0 · Cited by 29
Alternative High-Performance Fibers for Nonwoven HEPA Filter Media
Beckman, I. P., Berry, G., Cho, H., & Riveros, G. A. (2022) · Aerosol Science and Engineering · doi:10.1007/s41810-022-00161-6 · Cited by 29
Production of PP Composites Reinforced with Flax and Hemp Woven Mesh Fabrics via Compression Molding
Boccarusso, L., Fazio, D. D., & Durante, M. (2021) · Inventions · doi:10.3390/inventions7010005 · Cited by 28
Alao, P. F., Press, R., Kallakas, H., Ruponen, J., Poltimäe, T., & Kers, J. (2022) · Polymers · doi:10.3390/polym14112280 · Cited by 28
Effect of hemp bio composite strengthening on masonry barrel vaults damage
Gioffrè, M., Navarra, G., Cavalagli, N., Iacono, F. L., Gusella, V., & Pepi, C. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.130100 · Cited by 27
Lamsaf, H., Singh, S., Pereira, J., & Poças, M. D. F. T. (2023) · Coatings · doi:10.3390/coatings13071195 · Cited by 27
Budhathoki, R., Maraseni, T., & Apan, A. (2024) · GCB Bioenergy · doi:10.1111/gcbb.13141 · Cited by 28
Experimental and Statistical Investigations for Tensile Properties of Hemp Fibers
Sadeghi, P., Cao, Q. V., ABOUZEID, R. E., Shayan, M., Koo, M., & Wu, Q. (2024) · Fibers · doi:10.3390/fib12110094 · Cited by 26
Akköz, Y., & Coşkun, R. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126447 · Cited by 26
Kalisz, G., Gieroba, B., Iwańska, O., Suchora, M., Starosta, A. L., & Sroka‐Bartnicka, A. (2021) · Molecules · doi:10.3390/molecules26051314 · Cited by 25
Alothman, O. Y., Shaikh, H., Alshammari, B. A., & Jawaid, M. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02224-0 · Cited by 24
Fuels of the Future for Renewable Energy Sources (Ammonia, Biofuels, Hydrogen)Preprint
Mansoori, G. A., Agyarko, L. B., Estévez, L. A., Fallahi, B., Gladyshev, G. P., dos Santos, R. G., Niaki, S., Perišić, O., Sillanpää, M. E. T., Tumba, K., et al. (2021) · arXiv (Cornell University) · doi:10.48550/arxiv.2102.00439 · Cited by 24
Muedi, H. T. H., Kujoana, T. C., Shai, K., Mabelebele, M., & Sebola, N. A. (2024) · Animal Production Science · doi:10.1071/an23268 · Cited by 23
Sarno, L. D., Albuhairi, D., & Medeiros, J. M. P. (2024) · Structures · doi:10.1016/j.istruc.2024.107096 · Cited by 22
Biocomposite Based on Polylactic Acid and Rice Straw for Food Packaging Products
Kampeerapappun, P., O-Charoen, N., Dhamvithee, P., & Jansri, E. (2024) · Polymers · doi:10.3390/polym16081038 · Cited by 20
Biofuels and bioproducts from industrial hemp
Tulaphol, S., Sun, Z., & Sathitsuksanoh, N. (2021) · Advances in bioenergy · doi:10.1016/bs.aibe.2021.06.003 · Cited by 19
Introduction to bio-based fibers and their composites
Madhu, P., Jagadeesh, P., Sanjay, M. R., Siengchin, S., & Gorbatyuk, S. M. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824543-9.00014-1 · Cited by 19
Tupčiauskas, R., Rizhikovs, J., Andžs, M., & Bikovens, O. (2022) · Materials · doi:10.3390/ma15093141 · Cited by 19
Chrysafi, I., Ainali, N. M., Xanthopoulou, E., Zamboulis, A., & Bikiaris, D. Ν. (2023) · Journal of Composites Science · doi:10.3390/jcs7060216 · Cited by 19
Boros, A., & Tőzsér, D. (2023) · Resources · doi:10.3390/resources12100124 · Cited by 19
Properties of mixture of hemp bast and softwood pulp for filter paper manufacture
Yimlamai, P., Chitbanyong, K., Wanitpinyo, K., Puangsin, B., Nanta, K., Khantayanuwong, S., Pisutpiched, S., Chaisan, T., Fei, B., & Hızıroǧlu, S. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e25353 · Cited by 19
Kirilovs, E., Zotova, I., Gendelis, S., Gusovius, H., Kukle, S., & Stramkale, V. (2020) · Buildings · doi:10.3390/buildings10120228 · Cited by 19
Tarrés, Q., Hernández‐Díaz, D., & Ardanuy, M. (2021) · Polymers · doi:10.3390/polym13050768 · Cited by 19
The Integral Utilization of Date Palm Waste to Produce Plastic Composites
Belgacem, C., Serra-Parareda, F., Tarrés, Q., Mutjé, P., Delgado‐Aguilar, M., & Boufi, S. (2021) · Polymers · doi:10.3390/polym13142335 · Cited by 19
Kumar, S., Tewatia, P., Samota, S., Rattan, G., & Kaushik, A. (2022) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2022.02.035 · Cited by 19
Basak, M., Broadway, M., Lewis, J., Starkey, H., Bloomquist, M., Peszlen, I., Davis, J., Lucia, L. A., & Pal, L. (2025) · BioResources · doi:10.15376/biores.20.2.basak · Cited by 22
“It is composed of 70% to 75% cellulose, 15% to 20% hemicellulose, 3% to 5% lignin, 0.8% pectin, 2% to 6% extractives, and 1% to 2% ash content (Manaia et al. 2019; Möller and Popescu 2009; Zheljazkov et al. 2023).”
InfluentialFaidallah, R. F., Hanon, M. M., Salman, N. D., Ibrahim, Y., Babu, M. N., Gaaz, T. S., Szakál, Z., & Oldal, I. (2024) · Processes · doi:10.3390/pr12102217 · Cited by 18
Refaai, M. R. A., Stalin, N., Das, V. C., Prasad, D. V. S. S. S. V., Nalini, N., & Thanappan, S. (2022) · Advances in Polymer Technology · doi:10.1155/2022/8737669 · Cited by 18
Thin Hybrid Hemp/Carbon Fiber Composites: Manufacturing, Flexural, and Impact Behavior
Boccarusso, L., Pinto, F., Myronidis, K., Fazio, D. D., & Durante, M. (2023) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-023-07992-5 · Cited by 18
Razavi, M., Ogunbode, E. B., Nyakuma, B. B., Razavi, M., Yatim, J. M., & Lawal, T. A. (2021) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-021-01832-z · Cited by 18
Gheribi, R., Taleb, Y., Perrin, L., Segovia, C., Brosse, N., & Desobry, S. (2023) · Molecules · doi:10.3390/molecules28114488 · Cited by 17
Amzil, L., Fertahi, S., Raffak, T., & Mouhib, T. (2023) · Structures · doi:10.1016/j.istruc.2023.105373 · Cited by 17
Gioffrè, M., & Pepi, C. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109571 · Cited by 17
Игоревич, А. Д., Фоменко, И. А., Alekseeva, E., Chernukha, I. M., & Машенцева, Н. Г. (2024) · Food systems · doi:10.21323/2618-9771-2024-7-2-188-197 · Cited by 19
An Experimental Evaluation of Hemp as an Internal Curing Agent in Concrete Materials
Nazmul, R. T., Sainsbury, B.-A. L., Al‐Deen, S., Garcez, E. O., & Ashraf, M. (2023) · Materials · doi:10.3390/ma16113993 · Cited by 17
Leśniowski, J., Stawiarski, A., & Barski, M. (2025) · Materials · doi:10.3390/ma18225185 · Cited by 16
Hemp Fibre Treatments in Bio-Composites: A Review for Sustainable and Resilient Structures
Laktim, M. C., & Formisano, A. (2025) · Buildings · doi:10.3390/buildings15234238 · Cited by 16
Soykan, U., & Kaya, Ş. (2023) · Cellular Polymers · doi:10.1177/02624893231152383 · Cited by 16
Mechanical properties of natural fiber reinforced composite structure
Yamini, P., Rokkala, S., Rishika, S., Rani, P. M., & Kumar, R. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.04.547 · Cited by 16
Hussain, A., Podgursky, V., Goljandin, D., Antonov, M., Sergejev, F., & Krasnou, I. (2023) · Polymers · doi:10.3390/polym15163410 · Cited by 16
Angdembe, A., Sapkota, S. C., Rasekh, H., Mohammed, A. S., & Asteris, P. G. (2025) · Polymer · doi:10.1016/j.polymer.2025.128720 · Cited by 16
Cannabis/Hemp: Sustainable Uses, Opportunities, and Current Limitations
Ely, K., Podder, S., Reiss, M., & Fike, J. H. (2022) · Springer eBooks · doi:10.1007/978-981-16-8778-5_3 · Cited by 16
Krishnasamy, P., Mylsamy, G., Arulvel, S., Rajamurugan, G., & Gadekar, A. (2024) · Results in Physics · doi:10.1016/j.rinp.2024.107694 · Cited by 15
Rahman, M. A., Rahman, A., Ndiaye, M., & Weclawski, B. (2025) · Engineering Reports · doi:10.1002/eng2.70066 · Cited by 15
Nazerian, M., Naderi, F., Partovinia, A., Papadopoulos, A. N., & Younesi-Kordkheili, H. (2021) · Forests · doi:10.3390/f12111514 · Cited by 15
Metadata
- Authors
- Manaia, J. P., Manaia, A. T., & Rodriges, L.
- Affiliations
- Instituto Pedro Nunes (PT)
- Centro Tecnológico das Indústrias Têxtil e do Vestuário de Portugal (PT)
- Corresponding author
- Manaia, João P.
- ORCID
- Manaia, João P.
- Venue
- Fibers
- Publisher
- MDPI AG
- Published
- 2019-12-02
- Volume
- 7
- Issue
- 12
- Pages
- 106
- ISSN
- 2079-6439 (ISSN-L)
- OpenAlex
- W2990883936
- Cited by
- 317
- References
- 97
- Citations by year
- 2026: 44 · 2025: 72 · 2024: 68 · 2023: 46 · 2022: 35 · 2021: 38 · 2020: 14
- FWCI
- 9.29
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Fibers (publishedVersion, cc-by)
- Funders
- Interreg (SOE2 / P1 / P0524)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Polymers and Plastics › Dyeing and Modifying Textile Fibers
- Physical Sciences › Engineering › Mechanical Engineering › Fiber-reinforced polymer composites
- Keywords
- industrial hemp, Cannabis sativa, bast fibers, cellulose, mechanical properties, surface treatment, hybrid composites, polymer composites, biodegradability, fiber-reinforced composites, environmental protection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
