The DOI matches its Crossref record; 97 of the 98 references it cites were found in a registry or an index, and 1 are not checked yet.
Industrial Hemp Fibers: An Overview
Open accessAbstract
Industrial hemp (Cannabis sativa) is one of the most available and widely produced bast fibers with high cellulose content. Interest in these fibers is warranted due to environmental protection challenges as well as their inherent properties such as low density, high specific strength, and stiffness. In addition, advanced research and progress have gone into increasing their mechanical performance through surface treatments and in the development of new materials. The most promising application for hemp fibers is as reinforcement in polymeric composites or through hybridization. Nonetheless, more research is needed to improve their properties and expand their range of applications. The biodegradability issue is one problem that must be addressed when considering long life-cycle applications as the reproducibility of these composites’ final properties. This review is a comprehensive literature review on hemp fibers. It includes hemp fibers’ chemical and mechanical properties, surface modifications, hybrid composites, as well as current and future applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“It is composed of 70% to 75% cellulose, 15% to 20% hemicellulose, 3% to 5% lignin, 0.8% pectin, 2% to 6% extractives, and 1% to 2% ash content (Manaia et al. 2019; Möller and Popescu 2009; Zheljazkov et al. 2023).”
From A critical review of industrial fiber hemp anatomy, agronomic practices, and valorization into sustainable bioproducts (2025) · cites this paper as Manaia et al. 2019
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Hemp bast fibers are regarded as the strongest and longest natural fiber, and they are cheaper to manufacture, and last far longer than materials such as cotton (Cherney and Small 2016; Manaia et al. 2019; Rehman et al. 2021).”
From A critical review of industrial fiber hemp anatomy, agronomic practices, and valorization into sustainable bioproducts (2025) · cites this paper as Manaia et al. 2019
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,600
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
Joshi, S., Drzal, L. T., Mohanty, A. K., & Arora, S. (2003) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,342
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H. S., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,310
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,175
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
Mwaikambo, L. Y., & Ansell, M. P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10460 · Cited by 1,725
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,663
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Research works printed but not linked: 1
- Brosius, 2006, Natural Fiber Composites Slowly Take Root, Compos. Technol., 12, 32
Cited by
Sorted by citations
Items 201–300 of 327
Physicomechanical Properties of Epoxyurethane Biocomposites Strengthened with Hemp Wood Core
Samoilenko, T. F., Yashchenko, L. M., Yarovaya, N. V., Babich, O. V., & Brovko, O. O. (2021) · French-Ukrainian Journal of Chemistry · doi:10.17721/fujcv9i1p9-18 · Cited by 3
КОНОПЛЯ В КАЧЕСТВЕ ПЕРСПЕКТИВНОГО СЫРЬЯ ДЛЯ ХИМИИ И БИОТЕХНОЛОГИИ (ОБЗОР)
Александровна, К. А. (2021) · Высшая школа: научные исследования · doi:10.25699/tohbipp.2021.24.24.012 · Cited by 3
Lialina, N., Yudicheva, O., Samoilenko, A. I., Березовський, Ю. В., Moroz, O., Бондар-Підгурська, О. В., Glebova, A., Khliebnikova, N., & Novikova, V. (2023) · Fibres and Textiles · doi:10.15240/tul/008/2023-3-006 · Cited by 3
Enhancing hemp fiber performance: insights into chitosan treatment and structural evolution
Wang, X., Zhao, F., Cheung, T. W., Lee, C. H., & Li, L. (2024) · Textile Research Journal · doi:10.1177/00405175241240153 · Cited by 2
Elen, N. Ç., Çiçek, B., Elen, L., Moran, B., Yıldırım, M., & Kanbur, Y. (2025) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119251351717 · Cited by 2
Natural fibre-reinforced polymer biocomposite defects due to manufacturing procedures: A review
Shahar, F. S., Rafiqah, S. A., Balakrishnan, T. S., & Najeeb, M. I. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-28858-6.00001-6 · Cited by 2
Lipka, N., Żarnowiec, P., Soja, K., & Kaca, W. (2025) · Carbohydrate Research · doi:10.1016/j.carres.2025.109706 · Cited by 2
Advancements in 3D printed hemp-PLA composites: A sustainable approach for additive manufacturing
Mahesh, M. B., Sathish, M. B., Rangaswamy, M., Jamadar, N. S., Puttegowda, M., & Nagaraju, S. B. (2025) · Next research. · doi:10.1016/j.nexres.2025.101168 · Cited by 2
Singh, Kumar, P. V., Gupta, Palai, Kumari, & Arshi, A. (2025) · Bulgarian Chemical Communications · doi:10.34049/bcc.57.b.a0001 · Cited by 2
khdier, H. M., Salih, W. M., Ali, A. H., & Husham, K. A. F. (2025) · Journal of Materials Science Materials in Engineering · doi:10.1186/s40712-025-00368-8 · Cited by 2
Effect of nitride-fiber on functional characteristics of polymer composites
Krishnan, A. M., Nagarajan, N., Thakur, Y., Jadhav, A., Kumar, C. R., Lakshmi, G. J., Maranan, R., Rajendran, S., & Sathiyamurthy, S. (2025) · Journal of Polymer Engineering · doi:10.1515/polyeng-2025-0095 · Cited by 2
Weaving the Future: The Role of Novel Fibres and Molecular Traceability in Circular Textiles
de Sousa, S. P., da Silva, M. N., Braga, C., & Vasconcelos, M. W. (2026) · Applied Sciences · doi:10.3390/app16010497 · Cited by 2
Delignification Pathways for the Engineering of Nanostructured Wood
Liu, Q., Samad, Y. A., Zhang, H., Keplinger, T., Rojas, O. J., Beaumont, M., & Tardy, B. L. (2026) · Small Structures · doi:10.1002/sstr.202500575 · Cited by 2
Essential oil yield, composition, and fiber cell wall components in dual-purpose industrial hemp
Visković, J., Sikora, V. Š., Latković, D. S., Zeremski, T., Astatkie, T., Noller, J. S., & Zheljazkov, V. D. (2026) · Industrial Crops and Products · doi:10.1016/j.indcrop.2026.122866 · Cited by 2
Orcan, M. Y., & Akbaş, F. (2026) · BMC Plant Biology · doi:10.1186/s12870-026-08423-y · Cited by 2
Çetin, A., & Kurtaran, H. (2026) · Polymer Composites · doi:10.1002/pc.71022 · Cited by 2
Cadenazzi, T., Liu, K., & Keleş, B. (2026) · Journal of Building Engineering · doi:10.1016/j.jobe.2026.116002 · Cited by 2
Research on Seeding Performance of Self-Propelled Industrial Hemp Seeder
Duan, Y., Xiang, W., Lv, J., Yan, B., Hu, Y. G., & Wu, M. (2022) · Applied Sciences · doi:10.3390/app12168079 · Cited by 2
Donati, L., Conti, A., Pierantoni, D. C., Ruspi, C., Cerri, M., Emiliani, C., Cardinali, G., & Corte, L. (2025) · Microorganisms · doi:10.3390/microorganisms13020455 · Cited by 2
Effect of Plasma Modification on the Surface of Bast Fiber
Demin, K. A., Khagleev, A. N., Петухова, Е. С., Ayurova, O. Z., Petrov, A. L., Tsybikova, O. M., Namsaraeva, M. M., & Лхагвасуренович, М. У. (2024) · Journal of Surface Investigation X-ray Synchrotron and Neutron Techniques · doi:10.1134/s1027451024701787 · Cited by 2
Onwimol, D., Chakranon, P., Wonggasem, K., & Wongchaisuwat, P. (2025) · Journal of Agriculture and Food Research · doi:10.1016/j.jafr.2025.101836 · Cited by 2
The acoustic properties of coir coconut fiber
Ly, E. H. B., Khiari, R., & Ndiaye, D. (2022) · Elsevier eBooks · doi:10.1016/b978-0-443-15186-6.00090-4 · Cited by 2
Potential of Non-wood Fibers as Sustainable Reinforcements for Polymeric Composites—A Review
Paula, E. A. D. O., de Melo, R. R., Pedrosa, T. D., de Albuquerque, F. B., da Silva, F. M., & Pimenta, A. S. (2023) · Environmental footprints and eco-design of products and processes · doi:10.1007/978-981-99-2846-0_6 · Cited by 2
Hussain, M., Bisht, A., Chaudhary, M. N., Ramzan, K., Zehra, S. H., Viškelis, J., Viškelis, P., Balčiūnaitienė, A., & Benjakul, S. (2025) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2025.105295 · Cited by 2
Fahmi, F. F., Mahdi, T. H., Ferdousi, U. S., Uddin, M. B., Sarker, M. E., & Syduzzaman, M. (2024) · Composites science and technology · doi:10.1007/978-981-99-8327-8_9 · Cited by 2
Hemp crop waste for green solutions in construction: physical and mechanical characterization
Martínez, B. (2024) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.5821/dissertation-2117-406404 · Cited by 3
Zhang, Y., Liu, C., & Xia, S. (2024) · Research Journal of Textile and Apparel · doi:10.1108/rjta-07-2024-0128 · Cited by 1
Eren, S., ÖZTÜRK, M., Özenç, A. A., & Eren, H. A. (2025) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2025.59.78 · Cited by 1
Flammability Performance of the Natural Fiber-Reinforced Hybrid Composites
Tran, T. M. N., Do, V.-T., Do, Q. T., Thang, X. N., Prabhakar, M. N., & Song, J. (2025) · Composites science and technology · doi:10.1007/978-981-95-2389-4_10 · Cited by 1
Karaca, M. M., & Öztürk, F. H. (2025) · Gazi Üniversitesi Fen Bilimleri Dergisi Part C Tasarım ve Teknoloji · doi:10.29109/gujsc.1747040 · Cited by 1
Formisano, A., Fazio, D. D., Langella, A., Panico, M., & Durante, M. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-17158-3 · Cited by 1
A comprehensive review on fiber surface modifications and their impact on concrete properties
Mardani, A., Eren, S., & Özenç, A. A. (2025) · Journal of Adhesion Science and Technology · doi:10.1080/01694243.2025.2602688 · Cited by 1
Jabbar, M., Iftikhar, F., Hussain, T., Ahmad, F., & Ahmad, S. (2026) · Journal of Engineered Fibers and Fabrics · doi:10.1177/15589250251409369 · Cited by 1
Early-stage enzymatic treatments of scutched hemp fiber: Impact on fiber properties
Costa, R. V., Ferreira, S., Leite, L., Araújo, J. C., Ferreira, D. P., Bessa, J., Cunha, F., & Fangueiro, R. M. E. S. (2026) · Industrial Crops and Products · doi:10.1016/j.indcrop.2026.122783 · Cited by 1
Advancing Sustainability in Textiles: Natural Fibers, Bio-Based Materials, and Recycling Innovations
Kumari, N., Radha, & Puri, S. (2026) · Sustainable textiles · doi:10.1007/978-3-032-10921-7_5 · Cited by 1
Baltrocchi, A. P. D., Shafique, M., & Torretta, V. (2026) · Waste Management · doi:10.1016/j.wasman.2026.115812 · Cited by 1
Hemp Waste Stream Valorization Through Pyrolytic Carbonization for Epoxy Composite Strengthening
Zecchi, S., Cristoforo, G., Bartoli, M., Rosso, C., & Tagliaferro, A. (2024) · Journal of Composites Science · doi:10.3390/jcs8110473 · Cited by 1
KENEVİR/PAMUK KARIŞIMLI ÖRME KUMAŞLARIN PERFORMANS VE BİYOBOZUNURLUK VE ÖZELLİKLERİNİN ARAŞTIRILMASI
Kaynak, H. K., & Özşahin, K. (2025) · Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi · doi:10.17780/ksujes.1652335 · Cited by 1
Ye, Y., Yuan, H., Wang, H., Zhang, P., & Zhang, Y. (2025) · Russian Journal of Plant Physiology · doi:10.1134/s1021443724610772 · Cited by 1
Application of Natural Plant Fibres in Development of Sustainable Concrete: A Review
Jalgaonkar, K., Prasad, G. K., Mahawar, M. K., Senthilkumar, T., Dukare, A., Jha, N. K., Patil, S., Dhakane‐Lad, J., & Jagajanantha, P. (2025) · Journal of Scientific & Industrial Research · doi:10.56042/jsir.v84i8.12276 · Cited by 1
Modelling of impact damage in natural fibre-reinforced polymer biocomposite structures
Ebah, K. V.-J., Bensalah, H., Bouhfid, R., Qaiss, A. E. K., & Raji, M. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-28858-6.00007-7 · Cited by 1
Salih, T. M., & Salih, W. M. (2025) · Polímeros · doi:10.1590/0104-1428.20240088 · Cited by 1
Biopolymers and Biocomposites for Additive Manufacturing of Optical Frames
CARVALHO, B. M. D., Santos, F., Araújo, J., dos Santos, B. C., Lourenço, J. A., Ramos, P., & Encarnação, T. (2026) · Macromol—A Journal of Macromolecular Research · doi:10.3390/macromol6010008 · Cited by 1
Seemakram, W., Paluka, J., Khota, W., Suebrasri, T., Lapjit, C., Kuyper, T. W., & Boonlue, S. (2026) · Scientific Reports · doi:10.1038/s41598-026-46869-0 · Cited by 1
Bosco, N., Lojen, D., Kovač, J., Zaplotnik, R., Abashidze, N., Bassolino, L., Paris, R., Montanari, M., Balestrazzi, A., Mozetič, M., et al. (2026) · Plant Physiology and Biochemistry · doi:10.1016/j.plaphy.2026.111268 · Cited by 1
Posani, M., Habert, G., Djombou, Y. I. F., Du, Y., Vereecken, E., Estève-Bourrel, P., Pinchard, L., Losini, A. E., Coelho, G. B. A., Ben-Alon, L., et al. (2026) · Rilem bookseries · doi:10.1007/978-3-032-14652-6_32 · Cited by 1
Advances in electrospun nanofiber-based personal protective equipment for active filtration
Oliveira, J. S., Costa, S. M., Araújo, J. C., Fangueiro, R., & Ferreira, D. P. (2026) · Discover Nano · doi:10.1186/s11671-026-04693-5 · Cited by 1
Green Chemistry in Hemp Dyeing
Popescu, V., Marin, M., Popescu, G., Vasilache, V., & Popescu, A. (2026) · Fibers · doi:10.3390/fib14060070 · Cited by 1
Genetic Advances in Cannabis sativa L.: A Review of Recent Progress and Future Directions
Daundasekara, K. C., Thennakoon, K. P., Wickramasinghe, J. S., Woldesenbet, S., Delhom, C. D., Chandra, S., & Weerasooriya, A. D. (2026) · Plants · doi:10.3390/plants15132088 · Cited by 1
Changes in thermal stability of lignocelluloses waste aggregates long-term incorporated in composite
Števulová, N., & Eštoková, A. (2021) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/900/1/012042 · Cited by 1
Biorefinery of industrial hemp for value-added products
Sarker, M., & Wan, C. (2022) · Advances in bioenergy · doi:10.1016/bs.aibe.2022.05.005 · Cited by 1
Krishnasamy, P., GEETHA, M., Rajamurugan, G., MURALIDHARAN, B., & Krishnaiah, R. (2022) · Surface Review and Letters · doi:10.1142/s0218625x22501359 · Cited by 1
Antibacterial activity of cellulose/chitosan green composite for wound healing
Sanbhal, M., Solangi, Z., Memon, S. I., Sanbhal, N., Khanzada, T., Qureshi, K., & Wei, W. (2023) · Mehran University Research Journal of Engineering and Technology · doi:10.22581/muet1982.2304.2915 · Cited by 1
Salt-Free Dyeing of Cellulosic Fibers
Eren, S., Eren, H. A., Ozturk, M., & Hajı, A. (2024) · Sustainable textiles · doi:10.1007/978-3-031-51362-6_2 · Cited by 1
The Study of Mechanical Properties and Chemical Groups of Composite Concrete
Yusra, A., Hasan, M., Husin, H., Aulia, T. B., Baharuddin, B., Ramadhan, S., Fachruddin, F., & Sanusi, S. (2024) · Key engineering materials · doi:10.4028/p-c5xzpf · Cited by 1
The Physicochemical Properties of Hemp Fibers and Their Applications in the Textile Industry
Yu, S. (2024) · Biological Evidence · doi:10.5376/be.2024.14.0030 · Cited by 1
Thermal performance and durability of hemp shiv and recycled cardboard fibers
Martínez, B., Mendizábal, V., Bernat-Masó, E., & Gil, L. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-32800-8.00013-5 · Cited by 1
Kırbaş, H., Battal, Ö., Demir, S., Yatgın, U., Başlar, A., & Uzun, M. (2025) · Tekstilna industrija · doi:10.5937/tekstind2501004k · Cited by 1
Rana, A. K., Thakur, V. K., & Singha, A. S. (2021) · e-Polymers · doi:10.1515/epoly-2021-0080 · Cited by 1
Negoița, C. (2024) · Journal of Social Sciences · doi:10.52326/jss.utm.2024.7(1).02 · Cited by 1
Development of alternative air filtration materials and methods of analysis
Beckman, I. P. (2023) · doi:10.21079/11681/47188 · Cited by 1
Ligno-Cellulosic Insulation Boards of Improved Performance and the Technology of their Manufacture
Zotova, I. (2023) · doi:10.7250/9789934229954 · Cited by 1
Combined recycled waste glass and hemp as aggregate replacement in geopolymer concrete
Rahman, M. (2024) · Queensland University of Technology · doi:10.5204/thesis.eprints.250820 · Cited by 1
PECTIN QUANTIFICATION FROM CELLULOSIC/LIGNOCELLULOSIC RAW MATERIALS BY FT-IR ATR ANALYSIS
Chambre, D. R., & Dochia, M. (2021) · Scientific and Technical Bulletin Series Chemistry Food Science and Engineering · doi:10.62591/scien.tech.bull-chem.foodsci.eng.2020.17.04
Comparison of Thermal Insulation Concrete Panel Yield Based on Natural Fibres: A Review
Malaysia, U. T. H. O., Rosli, N. A., Rahman, M. F. A., & Malaysia, U. T. H. O. (2021) · Journal of Advanced Industrial Technology and Application · doi:10.30880/jaita.2021.02.01.001
Degumming of Hemp Fibers Using Combined Microwave Energy and Deep Eutectic Solvent
Ahmed, B. (2021) · Louisiana State University · doi:10.31390/gradschool_theses.5422
New Materials for Percussion Instruments
Bucur, V. (2022) · Springer eBooks · doi:10.1007/978-3-030-98650-6_17
The use of technical hemp processing products in animals and poultry feeding (review)
Denisenko, K., Duskaev, G. K., & Arinzhanova, M. S. (2022) · Животноводство и кормопроизводство · doi:10.33284/2658-3135-105-3-95
Aliyeva, N., YAĞCI, Y. E., Şaş, H. S., & Okan, B. S. (2023) · Research Square · doi:10.21203/rs.3.rs-2596389/v1
Ismail, N. A. N., Ibrahim, M., Abdullah, R., & Bakar, M. S. A. (2023) · AIP conference proceedings · doi:10.1063/5.0120884
Selection of yarns for manufacturing handloom Varanasi brocade by using the AHP method
Kushwaha, A., Chaudhary, K., Prakash, C., & Naik, M. K. P. (2023) · Polymer Bulletin · doi:10.1007/s00289-023-04933-z
Análisis competitivo del cultivo de Cannabis spp. y Erythroxylum coca en Colombia
Muñoz, A. D. P. Z., Perdomo, F. R., Medina, J. J. S., Másmela, J. C. O., & Galvis, C. P. U. (2023) · doi:10.21930/agrosavia.estudiodevigilancia.2023.1
Toward Increasing Public Awareness of Cellulose-Based Textiles with Improved Sustainability
Stankovic, S. B. (2023) · Sustainable textiles · doi:10.1007/978-3-031-43879-0_3
3-Point bending behaviors of sandwich panels with hemp fibers
KELTEN, O., & Güldaş, A. (2023) · Uluslararası Teknolojik Bilimler Dergisi · doi:10.55974/utbd.1322745
Automotive Industry, Hemp and Sustainable Polymers
Fink, J. K. (2024) · Wiley eBooks · doi:10.1002/9781394237579.ch2
EFFECT OF HEMP FIBER RATIO ON COMPRESSIVE STRENGTH
Direk, Y. S., & Karşİn, N. (2024) · International Journal of Engineering Technologies and Management Research · doi:10.29121/ijetmr.v11.i5.2024.1442
Singh, S. S. S. S., & Madhu, S. (2024) · AIP conference proceedings · doi:10.1063/5.0197464
Radiolysis of composite polypropylene/hemp fibers
Głuszewski, W., Lewandowska, H., Malinowski, R., & Krasinska, O. (2024) · Nukleonika · doi:10.2478/nuka-2024-0007
The variable response to the environment of plant stems as an example of natural intelligence
Santulli, C. (2024) · Cuadernos del Centro de Estudios de Diseño y Comunicación · doi:10.18682/cdc.vi239.11537
Yıldırım, R., Koçoğlu, H., Ullah, M. S., Özkoç, G., & Kodal, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00059-4
A New Tool for Measuring the Diameter of Hemp Fiber
Tesema, A. F., Delhom, C. D., Turner, C., Sayeed, M. A., & Abidi, N. (2024) · Journal of Natural Fibers · doi:10.1080/15440478.2024.2447536
Çoban, E., Dinçer, M. N., Tağı, S. Ö., & ŞIK, A. (2024) · Bidge Yayınları eBooks · doi:10.70269/sv494fz5tokj
Kenevir Bitkisinin Endüstride Kullanımı
Tağı, S. Ö., & ŞIK, A. (2024) · Bidge Yayınları eBooks · doi:10.70269/10.70269/9977283937
Conditioning banana sheath fibers using paraffin and micro wax to form creative products
Wisansakkul, S., & Oupathumpanont, O. (2025) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2025.101231
Extension of the weakest link model to describe hemp rope capacity
Pipistrelli, M. E., Gioffrè, M., & Grigoriu, M. D. (2025) · Probabilistic Engineering Mechanics · doi:10.1016/j.probengmech.2025.103764
Numerical Buckling Analysis of Hemp Fiber-Reinforced Hybrid Composites in Wind Turbine Blades
Amzil, L., Raffak, T., & Mouhib, T. (2025) · International Conference on Innovative Research in Applied Science, Engineering and Technology (IRASET) · doi:10.1109/iraset64571.2025.11008336
SÜRDÜRÜLEBİLİR ÜRETİM: KENEVİR BİTKİSİ VE SIFIR ATIK UYGULAMALARI
Helvacı, N. O., & Korkmaz, Y. (2025) · Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi · doi:10.17780/ksujes.1641228
TEKSTİL VE MODA TASARIMINDA KULLANILAN BİYOMATERYALLERE ÖRNEK BİR UYGULAMA
Öztürk, T., & Eroğlu, N. S. (2025) · Tekstil ve Mühendis · doi:10.7216/teksmuh.1436403
Developing a Sustainable Tennis Ball: A Comprehensive Analysis of Biodegradable Materials and LCA
Gonzalez, C. (2025) · Journal of Student Research · doi:10.47611/jsrhs.v14i1.8862
Assessing the sustainability of hemp farms: a case study using the FAO SAFA tool
Paulino, D. M. C., Martins, A. C. P. R. F., & Pinheiro, E. J. M. F. (2025) · Rural Sustainability Research · doi:10.2478/plua-2025-0005
Eco-friendly fibers for composites development: availability, properties, and applications
Adelani, S. O., Oladele, I. O., Olanrewaju, O. F., Ayanleye, O. T., Bichang’a, D. O., & Onuh, N. L. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-32796-4.00001-2
Sustainable Textiles from Recycling Materials for Thermal Insulation Applications
Coetzee, D., Venkataraman, M., Wiener, J., & Militký, J. (2025) · Engineering materials · doi:10.1007/978-981-95-1382-6_7
Flammability Performance of the Graphene-Infused Sisal/Epoxy and Hemp/Epoxy Composites
Harer, P. P., Balaji, K., Muthukumar, C., Jeyanthi, S., Senthilkumar, K., Kumar, T. S. M., & Sundaramoorthy, R. (2025) · Composites science and technology · doi:10.1007/978-981-95-2389-4_5
Korode, M. (2025) · Texas journal of multicultural education. · doi:10.70144/km020304hs
Nazih, F. E., Ebah, K. V.-J., Najemi, L., Raji, M., Bouhfid, R., & Qaiss, A. E. K. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-18868-8.00001-4
Experimental Study of Mechanical and Bond Strength of Hemp Fibre Reinforced Concrete
Rayan, V. D., Ramasubramani, R., Andrews, I. S., Moorthy, K. R., & Sakthivel, K. P. (2025) · Lecture notes in civil engineering · doi:10.1007/978-981-95-2266-8_26
Advanced characterization of nanocellulose and its composites
Nabhan, A., Rashed, A., Bettaieb, F., Aboelhassan, H. G., & Taha, M. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-26731-4.00011-2
Metadata
- Authors
- Manaia, J. P., Manaia, A. T., & Rodriges, L.
- Affiliations
- Instituto Pedro Nunes (PT)
- Centro Tecnológico das Indústrias Têxtil e do Vestuário de Portugal (PT)
- Corresponding author
- Manaia, João P.
- ORCID
- Manaia, João P.
- Venue
- Fibers
- Publisher
- MDPI AG
- Published
- 2019-12-02
- Volume
- 7
- Issue
- 12
- Pages
- 106
- ISSN
- 2079-6439 (ISSN-L)
- OpenAlex
- W2990883936
- Cited by
- 317
- References
- 97
- Citations by year
- 2026: 44 · 2025: 72 · 2024: 68 · 2023: 46 · 2022: 35 · 2021: 38 · 2020: 14
- FWCI
- 9.29
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Fibers (publishedVersion, cc-by)
- Funders
- Interreg (SOE2 / P1 / P0524)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Polymers and Plastics › Dyeing and Modifying Textile Fibers
- Physical Sciences › Engineering › Mechanical Engineering › Fiber-reinforced polymer composites
- Keywords
- industrial hemp, Cannabis sativa, bast fibers, cellulose, mechanical properties, surface treatment, hybrid composites, polymer composites, biodegradability, fiber-reinforced composites, environmental protection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
