The DOI matches its Crossref record; 97 of the 98 references it cites were found in a registry or an index, and 1 are not checked yet.
Industrial Hemp Fibers: An Overview
Open accessAbstract
Industrial hemp (Cannabis sativa) is one of the most available and widely produced bast fibers with high cellulose content. Interest in these fibers is warranted due to environmental protection challenges as well as their inherent properties such as low density, high specific strength, and stiffness. In addition, advanced research and progress have gone into increasing their mechanical performance through surface treatments and in the development of new materials. The most promising application for hemp fibers is as reinforcement in polymeric composites or through hybridization. Nonetheless, more research is needed to improve their properties and expand their range of applications. The biodegradability issue is one problem that must be addressed when considering long life-cycle applications as the reproducibility of these composites’ final properties. This review is a comprehensive literature review on hemp fibers. It includes hemp fibers’ chemical and mechanical properties, surface modifications, hybrid composites, as well as current and future applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“It is composed of 70% to 75% cellulose, 15% to 20% hemicellulose, 3% to 5% lignin, 0.8% pectin, 2% to 6% extractives, and 1% to 2% ash content (Manaia et al. 2019; Möller and Popescu 2009; Zheljazkov et al. 2023).”
From A critical review of industrial fiber hemp anatomy, agronomic practices, and valorization into sustainable bioproducts (2025) · cites this paper as Manaia et al. 2019
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Hemp bast fibers are regarded as the strongest and longest natural fiber, and they are cheaper to manufacture, and last far longer than materials such as cotton (Cherney and Small 2016; Manaia et al. 2019; Rehman et al. 2021).”
From A critical review of industrial fiber hemp anatomy, agronomic practices, and valorization into sustainable bioproducts (2025) · cites this paper as Manaia et al. 2019
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,600
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
Joshi, S., Drzal, L. T., Mohanty, A. K., & Arora, S. (2003) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,342
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H. S., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,310
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,175
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
Mwaikambo, L. Y., & Ansell, M. P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10460 · Cited by 1,725
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,663
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Flagged first, then by citations
Research works printed but not linked: 1
- Brosius, 2006, Natural Fiber Composites Slowly Take Root, Compos. Technol., 12, 32
Cited by
Sorted by citations
Items 101–200 of 327
Hemp From Disordered Lines for New Staple Fibre Yarns and High-Performance Composite Applications
Graupner, N., Weber, D. E., Bell, E. G., Lehmann, K., Hilgers, H.-W., Randerath, H., Gries, T., Walenta, I., Joulian, M., & Müssig, J. (2022) · Frontiers in Materials · doi:10.3389/fmats.2021.807004 · Cited by 15
Drouhet, Q., Touchard, F., & Chocinski‐Arnault, L. (2022) · Journal of Natural Fibers · doi:10.1080/15440478.2022.2126424 · Cited by 14
Gallos, A., Lannoy, O., Bellayer, S., Fontaine, G., Bourbigot, S., & Allais, F. (2023) · Green Chemistry Letters and Reviews · doi:10.1080/17518253.2022.2164472 · Cited by 14
Sharma, A. P., Velmurugan, R., Shukla, S., Bhandari, T., Guha, M., & Mukherjee, S. (2024) · Polymer Composites · doi:10.1002/pc.29211 · Cited by 14
Natural fibre-enhanced CO2 transport and uptake in cement pastes subjected to enforced carbonation
Zhuge, Y., Ong, P. B., Wong, H. S., & Myers, R. J. (2024) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2024.102983 · Cited by 16
Panday, D., Acharya, B. S., Dhakal, M., Caton, T., Lapham, C., Smith, A., & Ghalehgolabbehbahani, A. (2025) · Agrosystems Geosciences & Environment · doi:10.1002/agg2.70093 · Cited by 14
Raditya, V. Y. A., Lubis, M. A. R., Sari, R. K., Antov, P., Lee, S. H., Krišťák, Ľ., Mardawati, E., & Iswanto, A. H. (2023) · Materials · doi:10.3390/ma16165704 · Cited by 14
Saada, K., Farsi, C., Amroune, S., Fnides, M., Zaoui, M., & Heraiz, H. (2024) · Journal of Composite Materials · doi:10.1177/00219983241240819 · Cited by 14
Mechanical behaviors of composites made of natural fibers through environmentally friendly treatment
Sun, S., Pillay, S. B., & Ning, H. (2024) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057241239954 · Cited by 13
Bheel, N., Kumar, D., Ismail, F. I., Salilew, W. M., Alwetaishi, M., Waheeb, S. A., & Alkhattabi, L. (2024) · Scientific Reports · doi:10.1038/s41598-024-81345-7 · Cited by 13
Faghani, M., Tatara, R. A., & Vaezi, M. (2025) · Journal of Composite Materials · doi:10.1177/00219983251362535 · Cited by 12
Mechanical response of the hemp biocarbon-filled hemp-reinforced biopolymer composites
Dahal, R. K., Acharya, B., & Dutta, A. (2023) · Journal of Polymer Research · doi:10.1007/s10965-023-03657-y · Cited by 12
Cao, K., Sun, Y., Zhang, X., Zhao, Y., Bian, J., Zhu, H., Wang, P., Gao, B., Sun, X., Hu, M., et al. (2023) · BMC Plant Biology · doi:10.1186/s12870-023-04463-w · Cited by 12
Milanovic, J. Z., Milošević, M. D., Janković-Častvan, I. M., & Kostić, M. (2021) · Journal of Natural Fibers · doi:10.1080/15440478.2020.1870609 · Cited by 12
Both, A. K., Helle, M., Madireddy, G., & Cheung, C. L. (2021) · ACS Agricultural Science & Technology · doi:10.1021/acsagscitech.1c00118 · Cited by 11
Thirukumaran, M., Uthayakumar, G., Ganapathy, T., Sudhakar, K., Durkaieswaran, P., & Stalin, S. R. (2024) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-024-05766-0 · Cited by 11
Sathya Narayana Moorthy, J., & Sharan Chandran, M. (2025) · Composite Interfaces · doi:10.1080/09276440.2025.2525590 · Cited by 11
Petrenko, D., Klushin, V. А., Zelenskaya, A., Yatsenko, A. N., Sotnikov, A., Ulyankina, A. A., & Smirnova, N. V. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-03342-6 · Cited by 11
Hemp Stem Epidermis and Cuticle: From Waste to Starter in Bio-Based Material Development
Pecoraro, M. T., Mellinas, C., Piccolella, S., Garrigós, M. C., & Pacifico, S. (2022) · Polymers · doi:10.3390/polym14142816 · Cited by 12
Li, C., Shao, R., Wang, C., Fu, G., & Yang, B. (2023) · Fibers and Polymers · doi:10.1007/s12221-023-00327-0 · Cited by 10
Aliyeva, N., Şaş, H. S., & Okan, B. S. (2023) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057231222821 · Cited by 10
Sengupta, S., Bhowmick, M., Basak, S., Samanta, K. K., Mishra, L., Das, A., & Shakyawar, D. B. (2024) · Cellulose · doi:10.1007/s10570-024-06009-1 · Cited by 10
Williams, A., Brym, Z., Chen, C., Collins, A. A., Crawford, J. L., Darby, H. M., DeDecker, J., Ellison, S. L., Fike, J. H., Gage, K. L., et al. (2025) · Agronomy Journal · doi:10.1002/agj2.70006 · Cited by 10
Evaluating the impact of coatings and chemical treatments on the tensile behavior of natural fibers
Pipistrelli, M. E., Pepi, C., Greco, P. F., Tomassoli, L., Vinti, F., Quaglia, G., Latterini, L., & Gioffrè, M. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.141724 · Cited by 10
Industrial Hemp as Precursor for Sustainable Bioproducts: Recent Trends and Prospects
Yusuf, S. B., Ewurum, N., Appiah, H., & Tongco, J. V. (2025) · Fibers · doi:10.3390/fib13110155 · Cited by 11
Santos, C. M. D. S., Santos, T. F., Maniçoba, E. G. L., & Aquino, M. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824543-9.00031-1 · Cited by 10
POTENCIAL DE USO DE CÂNHAMO INDUSTRIAL (Cannabis sativa L.), PARA A PRODUÇÃO DE CELULOSE FIBRA LONGA
Freire, H. S. A., da Costa, M. M., Rocha, S., & dos Santos, G. A. (2021) · Boletim Técnico SIF/Boletim técnico - SIF (Impresso) · doi:10.53661/2763-686020210000003 · Cited by 10
Sacrifice Few to Save Many: Fire Protective Interlayers in Carbon-Fiber-Reinforced Laminates
Tabaka, W., Meinel, D., & Schartel, B. (2024) · ACS Omega · doi:10.1021/acsomega.4c01408 · Cited by 9
Sun, S., Yan, Y., Zhou, C., Pillay, S. B., & Ning, H. (2024) · Polymer Composites · doi:10.1002/pc.28824 · Cited by 9
Górski, K. M., Kowalczyk, T., Gładyś, A., Glica, M., Muskała, M., Picot, L., Mori, M., Hatziantoniou, S., & Sitarek, P. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.120566 · Cited by 9
Bio-Based Brake Pads: A Review of Natural Fillers and Their Performance Characteristics
Nwankwo, E. I., Onyenanu, I. U., & Nwobi-Okoye, C. C. (2025) · International Journal of Applied and Natural Sciences · doi:10.61424/ijans.v3i2.335 · Cited by 9
Harnessing Cannabis sativa L. for integrated environmental remediation and circular biomass use
Jurga, A., Rodziewicz, T., Grzegorzek, M., Wdowikowska, A., Reda, M., Leluk, K., Janicka, M., & Kaźmierczak, B. (2025) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2025.179976 · Cited by 10
Valorization of hemp fibers into biocomposites via one‐step pectin‐based green fabrication process
Both, A. K., Choudhry, D., & Cheung, C. L. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.53586 · Cited by 9
Sipahi, H., Haiden, S. R., & Berkowitz, G. A. (2024) · PeerJ · doi:10.7717/peerj.17821 · Cited by 10
Enzymatic degumming of hemp: a literature review
Wang, S., & Salmon, S. (2025) · Cellulose · doi:10.1007/s10570-025-06697-3 · Cited by 8
Fully biodegradable printed electronic sensors based on biomass-derived graphene inks and agripapers
Chaney, L. E., Hui, J., You, H., Zhou, Y., Downing, J. R., Chen, W. Y., Benson, E. R., Dunn, J. B., Rowan, S. J., & Hersam, M. C. (2026) · npj Advanced Manufacturing · doi:10.1038/s44334-025-00063-8 · Cited by 8
Eliopoulos, C., Μάρκου, Γ., Chorianopoulos, N., Haroutounian, S. A., & Arapoglou, D. (2022) · Applied Sciences · doi:10.3390/app12052376 · Cited by 8
Zuazo, V. H. D., Rodríguez, B. C., García-Tejero, I. F., & Ruíz, B. G. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-89867-6.00011-1 · Cited by 8
Hemp Fibres: Essentials, Composites or Nanocomposites and Technical Applications
Kausar, A., & Ahmad, I. (2023) · Nano-Horizons Journal of Nanosciences and Nanotechnologies · doi:10.25159/3005-2602/13835 · Cited by 9
Feleke, K., Ganesh, T., Beri, H., & Murtaza, A. (2024) · Journal of Engineered Fibers and Fabrics · doi:10.1177/15589250241265709 · Cited by 8
Barbière, R., Touchard, F., Chocinski‐Arnault, L., Fourré, É., Leroy, E., & Barrault, J. (2021) · Journal of Composite Materials · doi:10.1177/00219983211015427 · Cited by 8
Arshad, M. N., Thiagamani, S. M. K., Jeyaguru, S., Muthukumar, C., Krishnasamy, S., Subramaniam, J., Khan, A., & Althomali, R. H. (2024) · Polymer Composites · doi:10.1002/pc.28280 · Cited by 7
Krishna Kumar, P., Lokeshwar, G., Reddy, C. U. K., Jyotis, A., Shetty, N., Shahabaz, S. M., & Nargis, T. (2025) · Materials Research Express · doi:10.1088/2053-1591/adb2e3 · Cited by 7
Berni, R., Hausman, J. F., Lutts, S., & Guerriero, G. (2024) · Plant Stress · doi:10.1016/j.stress.2024.100668 · Cited by 6
Production, Repairing and Testing of Hemp Reinforced Recycled HDPE Composites
Hawary, O. E., Boccarusso, L., Durante, M., Panico, M., & Pinto, F. (2025) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-025-10170-5 · Cited by 6
Carbonized Hemp Fiber for Use in Composites
Yusuf, S. B., Maughan, M. R., & McDonald, A. G. (2025) · Materials · doi:10.3390/ma18112509 · Cited by 6
Bárcena, A. D., & Giraldo, P. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.117143 · Cited by 6
Scheibe, M., Urbaniak, M., & Bledzki, A. K. (2023) · Journal of Natural Fibers · doi:10.1080/15440478.2023.2251682 · Cited by 6
First Report of Hemp Fusarium Wilt Caused by Fusarium oxysporum in Croatia
Duvnjak, T., Vrandečić, K., Sudarić, A., Ćosić, J., Siber, T., & Kočar, M. M. (2023) · Plants · doi:10.3390/plants12183305 · Cited by 6
Ye, Y., Wang, H., Zhang, P., & Zhang, Y. (2025) · Agriculture · doi:10.3390/agriculture15020125 · Cited by 6
Drouhet, Q., Touchard, F., & Chocinski‐Arnault, L. (2023) · Micro · doi:10.3390/micro3020033 · Cited by 6
Natrayan, L., Kaliappan, S., Balaji, V., & Mahesh, V. (2024) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2024-01-5053 · Cited by 5
Dobrotă, D., Icociu, C. V., Lazăr, S. V., Racz, S., & Moraru, G.-M. (2024) · Polymers · doi:10.3390/polym16243458 · Cited by 5
Guo, W., Zhou, Y., Liu, X., Zhao, F. X., Huang, H., & Han, C. (2025) · Polymer Composites · doi:10.1002/pc.70201 · Cited by 5
Rahman, M. A., Ndiaye, M., Weclawski, B., & Farrell, P. (2025) · Journal of Natural Fibers · doi:10.1080/15440478.2025.2553671 · Cited by 5
Liao, S., Chen, J., & Wang, X. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.121516 · Cited by 5
Baltrocchi, A. P. D., & Shafique, M. (2026) · Frontiers in Sustainability · doi:10.3389/frsus.2025.1716779 · Cited by 5
Srinivasan, R., Prasad, M. S., Ramesh, G., & Murugan, M. A. (2026) · Polymer Bulletin · doi:10.1007/s00289-025-06166-8 · Cited by 5
Jasti, A., & Biswas, S. (2023) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062231152180 · Cited by 5
Novel thermoset formulations from cannabidiol (CBD) oil
Kınacı, E., Salazar, S. A., Tanami, K., Stanzione, J. F., & Palmese, G. R. (2024) · Next Materials · doi:10.1016/j.nxmate.2024.100261 · Cited by 5
Nanomechanical characterization of hemp fiber with atomic force microscopy
Chowdhury, S., Wang, X., Rahman, M. A., & Ulven, C. A. (2024) · Journal of Composite Materials · doi:10.1177/00219983241292776 · Cited by 5
Economic potential of industrial hemp in Oregon: An ex ante minimum‐data assessment
Antle, J. M., & Cho, S. (2024) · Applied Economic Perspectives and Policy · doi:10.1002/aepp.13477 · Cited by 5
Tutek, K., Kosmalska, A., & Masek, A. (2025) · Journal of Natural Fibers · doi:10.1080/15440478.2025.2473466 · Cited by 5
NON-WOODEN RAW AS A SOURCE OF CELLULOSE FIBERS. USE PROSPECTS, PROBLEMS AND SOLUTIONS (REVIEW)
Karelina, A. A., Alashkevich, Y., & Kozhukhov, V. A. (2024) · chemistry of plant raw material · doi:10.14258/jcprm.20240213401 · Cited by 5
Synthesis, Properties, and Characterization of Fibrous Filler
Das, T. K., & Jesionek, M. (2024) · Composites science and technology · doi:10.1007/978-981-97-3909-7_4 · Cited by 5
Anbalagan, S., & Mekala, M. (2021) · Journal of University of Shanghai for Science and Technology · doi:10.51201/jusst/21/08362 · Cited by 5
Senniangiri, N., Arunkumar, N., Dhanabal, A., Kamalakannan, K., & Thrisul, J. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.09.103 · Cited by 5
Thermal Comfort Properties of Biodegradable Hemp and Polylactide Fiber Knitted Fabrics
Padleckienė, I., Stygienė, L., Krauledas, S., Abraitienė, A., & Sankauskaitė, A. (2025) · Polymers · doi:10.3390/polym17070903 · Cited by 4
Chandradass, J., Thirugnanasambandham, T., Mariappan, R., Jawahar, P. M., & Nageswaran, M. (2025) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-025-0925-7 · Cited by 4
Coating of Hemp Fibres with Hydrophobic Compounds Extracted from Pine Bark
Abbel, R., Risani, R., Nourtier, M., Donaldson, L. A., Brunschwig, C., Mayer‐Laigle, C., Bridson, J. H., Thumm, A., Dickson, A., Murray, R. H., et al. (2024) · Fibers · doi:10.3390/fib12110096 · Cited by 4
Valorisation of bio-waste for the development of sustainable technical textiles
Motaleb, K. Z. M. A., Islam, S., Faheem, M. S., Khan, A. A., Hasan, M. B., Jamshaid, H., Janutėnienė, J., & Tadžijevas, A. (2025) · Textile Progress · doi:10.1080/00405167.2025.2569218 · Cited by 4
Panday, D., Heydar, P., Lapham, C., Pierce, A., Dhakal, M., Ghalehgolabbehbahani, A., Fioravanti, G., & Kander, R. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.122466 · Cited by 4
Picchi, G., Callegari, A., Capodaglio, A. G., Martellini, T., Masi, F., Mastrolonardo, G., NOCENTINI, M., Sarti, C., & Vadivel, D. (2026) · Sustainability · doi:10.3390/su18062926 · Cited by 4
Medikal ve Endüstriyel Açıdan Kannabinoidlerin Önemi ve Türkiye Ekonomisine Katkı Potansiyeli
GÖKGÖZ, A., & Can, E. Y. (2021) · Medical Journal of Western Black Sea · doi:10.29058/mjwbs.928899 · Cited by 4
Samoilenko, T. F., Yashchenko, L. M., Yarovaya, N. V., & Brovko, O. O. (2023) · Iranian Polymer Journal · doi:10.1007/s13726-022-01136-7 · Cited by 4
Challenges in Manufacturing of Hemp Fiber-Reinforced Organo Sheets with a Recycled PLA Matrix
Salmins, M., Gortner, F., & Mitschang, P. (2023) · Polymers · doi:10.3390/polym15224357 · Cited by 4
Ihlenfeldt, S., Müller, J., Peukert, C., & Rogall, L. (2024) · Procedia CIRP · doi:10.1016/j.procir.2024.08.031 · Cited by 4
Trociński, A., Dziurka, D., Thomas, M., & Mirski, R. (2024) · Materials · doi:10.3390/ma17184555 · Cited by 4
Planting Sustainability: A Comprehensive Review of Plant Fibres in Needle-Punching Nonwovens
Marques, R., Oliveira, C., Araújo, J. C., Chaves, D. M., Ferreira, D. P., Fangueiro, R. M. E. S., Silva, C., & Rodrigues, L. (2024) · Textiles · doi:10.3390/textiles4040031 · Cited by 4
Bambach, M. R. (2025) · Materials · doi:10.3390/ma18102180 · Cited by 4
Samoilenko, T. F., Yashchenko, L. M., Yarovaya, N. V., & Brovko, O. O. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103508 · Cited by 4
Flexural analysis of hemp, kenaf and glass fibre-reinforced polyester resin
Mohamad, M. A., Jumahat, A., & Sapiai, N. (2022) · Physical Sciences Reviews · doi:10.1515/psr-2022-0051 · Cited by 4
Potential of Thai Bast Fibers for Injection Molded PLA Composites
Graupner, N., Poonsawat, T., Narkpiban, K., & M黶sig, J. (2023) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2023.025529 · Cited by 4
FRACTURE RESISTANCE OF COMPOSITE STRUCTURS FROM HEMP BIO-FIBERS
Elzayady, N. E., & Elghandour, E. I. (2020) · Journal of Advanced Engineering Trends · doi:10.21608/jaet.2020.44308.1059 · Cited by 4
The customer’s preference in light cannabis: an Italian perspective
Mancinelli, R., Altimari, A., Papetti, P., & Radicetti, E. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-89867-6.00004-4 · Cited by 4
Yilmaz, G., İsmetoğlu, G. Ç., & Ünal, H. Í. (2025) · Polymer Composites · doi:10.1002/pc.70409 · Cited by 3
Bapat, K. S., Kailas, L., Pask, C. M., Kee, T. P., & Russell, S. J. (2025) · ACS Omega · doi:10.1021/acsomega.5c06420 · Cited by 3
Iftikhar, F., Anjum, A. S., Choudry, Z., Zahid, A., Khan, M. Q., Nawaz, H., & Umar, M. (2025) · Journal of Natural Fibers · doi:10.1080/15440478.2025.2608721 · Cited by 3
Chaudhary, V. K., Ahlawat, C., Setiya, S., Sharma, T., & Senthamaraikannan, P. (2026) · Polymer Bulletin · doi:10.1007/s00289-025-06270-9 · Cited by 3
From Hemp Bast to Lyocell Fiber: Sustainable Process Optimization for Lyocell‐Grade Dissolving Pulp
Sayed, M. A., Lawson, L., Souto, B. A., Noor, K., Haddis, D. Z., Hailu, F. T., Batcheller, J. C., Bressler, D. C., & Dolez, P. I. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70544 · Cited by 3
Rahman, M. A., Ndiaye, M., Weclawski, B., & Farrell, P. (2026) · Journal of Natural Fibers · doi:10.1080/15440478.2026.2651987 · Cited by 3
Industrial and Therapeutic Applications of Hemp: A Review
Chiririwa, H. (2026) · Molecules · doi:10.3390/molecules31101699 · Cited by 3
Drouhet, Q., Barbière, R., Touchard, F., Chocinski‐Arnault, L., & Mellier, D. (2023) · Fibers · doi:10.3390/fib11100088 · Cited by 3
HEMP FIBER REINFORCED SUSTAINABLE “GREEN” COMPOSITE PRODUCTION WITH EPOXIDIZED SOYBEAN OIL
Gedik, G., Ağır, İ., Var, C., & Avinç, O. (2024) · Tekstil ve Mühendis · doi:10.7216/teksmuh.1340701 · Cited by 3
Yıldız, A., Yıldız, E., & Koçak, A. B. (2025) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.14568 · Cited by 3
Mijas, G., Golla, A., Prieto, R., Cano, F., Algaba, I. M., Riba‐Moliner, M., & Cayuela, D. (2025) · Cellulose · doi:10.1007/s10570-025-06557-0 · Cited by 3
Çetin, A., & Kurtaran, H. (2025) · Journal of Composite Materials · doi:10.1177/00219983251341619 · Cited by 3
Han, J.-Y., Lim, D.-W., Kwon, O., Lee, Y. J., Choi, H. Y., Jung, H., Noh, S., Cho, M., Kang, S. S., & Lee, Y.-M. (2025) · Frontiers in Pharmacology · doi:10.3389/fphar.2025.1617180 · Cited by 3
Kumar, P. P. S., Singh, S. B., & Barai, S. V. (2024) · International Journal of Civil Engineering · doi:10.1007/s40999-024-01003-x · Cited by 3
Flame retardant fiber-reinforced epoxy composites for aviation and automotive applications
Mu, X. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-16046-2.00008-0 · Cited by 3
Metadata
- Authors
- Manaia, J. P., Manaia, A. T., & Rodriges, L.
- Affiliations
- Instituto Pedro Nunes (PT)
- Centro Tecnológico das Indústrias Têxtil e do Vestuário de Portugal (PT)
- Corresponding author
- Manaia, João P.
- ORCID
- Manaia, João P.
- Venue
- Fibers
- Publisher
- MDPI AG
- Published
- 2019-12-02
- Volume
- 7
- Issue
- 12
- Pages
- 106
- ISSN
- 2079-6439 (ISSN-L)
- OpenAlex
- W2990883936
- Cited by
- 317
- References
- 97
- Citations by year
- 2026: 44 · 2025: 72 · 2024: 68 · 2023: 46 · 2022: 35 · 2021: 38 · 2020: 14
- FWCI
- 9.29
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Fibers (publishedVersion, cc-by)
- Funders
- Interreg (SOE2 / P1 / P0524)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Physical Sciences › Materials Science › Polymers and Plastics › Dyeing and Modifying Textile Fibers
- Physical Sciences › Engineering › Mechanical Engineering › Fiber-reinforced polymer composites
- Keywords
- industrial hemp, Cannabis sativa, bast fibers, cellulose, mechanical properties, surface treatment, hybrid composites, polymer composites, biodegradability, fiber-reinforced composites, environmental protection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
