The DOI matches its Crossref record; 95 of the 95 references it cites were found in a registry or an index.
Biopolymers as Green Binders for Soil Improvement in Geotechnical Applications: A Review
Open accessAbstract
Soil improvement using biopolymers has attracted considerable attention in recent years, with the aim to reduce the harmful environmental effects of traditional materials, such as cement. This paper aims to provide a review on the environmental assessment of using biopolymers as binders in soil improvement, biopolymer-treated soil characteristics, as well as the most important factors affecting the behavior of the treated soil. In more detail, environmental benefits and concerns about the use of biopolymers in soil improvement as well as biopolymer–soil interaction are discussed. Various geotechnical properties are evaluated and compared, including the unconfined compressive strength, shear strength, erosion resistance, physical properties, and durability of biopolymer-treated soils. The influential factors and soil and environmental conditions affecting various geotechnical characteristics of biopolymer-treated soils are also discussed. These factors include biopolymer concentration in the biopolymer–soil mixture, moisture condition, temperature, and dehydration time. Potential opportunities for biopolymers in geotechnical engineering and the challenges are also presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
A review of chitin and chitosan applications
Ravi Kumar, M. N. V. (2000) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(00)00038-9 · Cited by 6,009
Food Polysaccharides and Their Applications
(2016) · CRC Press eBooks · doi:10.1201/9781420015164 · Cited by 1,650
Xanthan gum: production, recovery, and properties
Garcı́a-Ochoa, F., Santos, V. E., Casas, J. A., & Gómez, E. (2000) · Biotechnology Advances · doi:10.1016/s0734-9750(00)00050-1 · Cited by 1,584
Thermosensitive sol-gel reversible hydrogels
Jeong, B., Kim, S. W., & Bae, Y. H. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00242-3 · Cited by 1,478
Némethy, G., & Scheraga, H. A. (1962) · The Journal of Chemical Physics · doi:10.1063/1.1732472 · Cited by 1,108
Ivanov, V., & Chu, J. (2008) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-007-9126-3 · Cited by 1,041
Biodegradable and compostable alternatives to conventional plastics
Song, J. H., Murphy, R. J., Narayan, R., & Davies, G. B. H. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0289 · Cited by 971
Morgan, R. P. C. (1988) · Soil Science · doi:10.1097/00010694-198806000-00011 · Cited by 822
Biogeochemical processes and geotechnical applications: progress, opportunities and challenges
DEJONG, J. T., SOGA, K., KAVAZANJIAN, E., BURNS, S., VAN PAASSEN, L. A., AL QABANY, A., AYDILEK, A., BANG, S. S., BURBANK, M., CASLAKE, L. F., et al. (2013) · Géotechnique · doi:10.1680/geot.sip13.p.017 · Cited by 809
Effects of Xanthan gum biopolymer on soil strengthening
Chang, I., Im, J., Prasidhi, A. K., & Cho, G.-C. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.10.026 · Cited by 789
Self-citationEffect of chemical treatment used in MICP on engineering properties of cemented soils
QABANY, A. A., & SOGA, K. (2013) · Géotechnique · doi:10.1680/geot.sip13.p.022 · Cited by 614
Structural studies of gellan gum, an extracellular polysaccharide elaborated by Pseudomonas elodea
Jansson, P.-E., Lindberg, B., & Sandford, P. A. (1983) · Carbohydrate Research · doi:10.1016/0008-6215(83)88361-x · Cited by 612
Surface charge heterogeneity of kaolinite in aqueous suspension in comparison with montmorillonite
Tombácz, E., & Szekeres, M. (2006) · Applied Clay Science · doi:10.1016/j.clay.2006.05.009 · Cited by 595
Mujah, D., Shahin, M. A., & Cheng, L. (2017) · Geomicrobiology Journal · doi:10.1080/01490451.2016.1225866 · Cited by 559
Thermosensitive sol–gel reversible hydrogels
Jeong, B., Kim, S. W., & Bae, Y. H. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.012 · Cited by 533
Baveye, P., Vandevivere, P., Hoyle, B. L., DeLeo, P. C., & de Lozada, D. S. (1998) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389891254197 · Cited by 513
Chang, I., Im, J., & Cho, G.-C. (2016) · Sustainability · doi:10.3390/su8030251 · Cited by 494
Self-citationDiscovery of Lignin in Seaweed Reveals Convergent Evolution of Cell-Wall Architecture
Martone, P. T., Estevez, J. M., Lu, F., Ruel, K., Denny, M. W., Somerville, C., & Ralph, J. (2009) · Current Biology · doi:10.1016/j.cub.2008.12.031 · Cited by 467
Antimicrobial action of .EPSILON.-poly-L-lysine.
SHIMA, S., MATSUOKA, H., IWAMOTO, T., & SAKAI, H. (1984) · The Journal of Antibiotics · doi:10.7164/antibiotics.37.1449 · Cited by 463
Tang, C.-S., Yin, L.-Y., Jiang, N.-J., Zhu, C., Zeng, H., Li, H., & Shi, B. (2020) · Environmental Earth Sciences · doi:10.1007/s12665-020-8840-9 · Cited by 437
Review on biopolymer-based soil treatment (BPST) technology in geotechnical engineering practices
Chang, I., Lee, M., Tran, A. T. P., Lee, S., Kwon, Y.-M., Im, J., & Cho, G.-C. (2020) · Transportation Geotechnics · doi:10.1016/j.trgeo.2020.100385 · Cited by 430
Self-citationImprovement of Problematic Soils with Biopolymer—An Environmentally Friendly Soil Stabilizer
Latifi, N., Horpibulsuk, S., Meehan, C. L., Abd Majid, M. Z., Tahir, M. M., & Mohamad, E. T. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001706 · Cited by 424
Kabir, E., Kaur, R., Lee, J., Kim, K.-H., & Kwon, E. E. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120536 · Cited by 371
Investigation of soil stabilization using chitosan biopolymer
Hataf, N., Ghadir, P., & Ranjbar, N. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.256 · Cited by 346
A review of microbial precipitation for sustainable construction
Achal, V., & Mukherjee, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.04.051 · Cited by 328
Soil strengthening using thermo-gelation biopolymers
Chang, I., Prasidhi, A. K., Im, J., & Cho, G.-C. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.12.116 · Cited by 309
Self-citationChoi, S.-G., Chang, I., Lee, M., Lee, J.-H., Han, J.-T., & Kwon, T. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118415 · Cited by 307
Self-citationPhysico-chemical properties and rheology of alginate gel beads formed with various divalent cations
Ouwerx, C., Velings, N., Mestdagh, M. M., & Axelos, M. A. V. (1998) · Polymer Gels and Networks · doi:10.1016/s0966-7822(98)00035-5 · Cited by 305
Enhancing mechanical behaviors of collapsible soil using two biopolymers
Ayeldeen, M., Negm, A., El-Sawwaf, M., & Kitazume, M. (2017) · Journal of Rock Mechanics and Geotechnical Engineering · doi:10.1016/j.jrmge.2016.11.007 · Cited by 289
Toghroli, A., Mehrabi, P., Shariati, M., Trung, N. T., Jahandari, S., & Rasekh, H. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118997 · Cited by 287
Strengthening of Korean residual soil with β-1,3/1,6-glucan biopolymer
Chang, I., & Cho, G.-C. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.11.030 · Cited by 265
Self-citationUse of xanthan and guar gums in soil strengthening
Dehghan, H., Tabarsa, A., Latifi, N., & Bagheri, Y. (2018) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-018-1625-0 · Cited by 262
(2011) · Springer eBooks · doi:10.1007/978-3-642-11274-4 · Cited by 242
Biodegradation of starch/polylactic acid/poly(hydroxyester-ether) composite bars in soil
Shogren, R. L., Doane, W. M., Garlotta, D., Lawton, J. W., & Willett, J. L. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00356-7 · Cited by 242
Effects of Microorganisms on Lignin
Kirk, T. K. (1971) · Annual Review of Phytopathology · doi:10.1146/annurev.py.09.090171.001153 · Cited by 215
Strong Adhesion and Cohesion of Chitosan in Aqueous Solutions
Lee, D. W., Lim, C., Israelachvili, J. N., & Hwang, D. S. (2013) · Langmuir · doi:10.1021/la403124u · Cited by 209
A review of sustainable approaches in transport infrastructure geotechnics
Correia, A. G., Winter, M. G., & Puppala, A. J. (2016) · Transportation Geotechnics · doi:10.1016/j.trgeo.2016.03.003 · Cited by 209
Properties of xanthan gum in aqueous solutions: Role of the conformational transition
Milas, M., & Rinaudo, M. (1986) · Carbohydrate Research · doi:10.1016/0008-6215(86)84017-4 · Cited by 202
Mitigation of liquefaction of saturated sand using biogas
HE, J., CHU, J., & IVANOV, V. (2013) · Géotechnique · doi:10.1680/geot.sip13.p.004 · Cited by 199
The drying effect on xanthan gum biopolymer treated sandy soil shear strength
Chen, C., Wu, L., Perdjon, M., Huang, X. J., & Peng, Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.120 · Cited by 195
Shear strength behavior and parameters of microbial gellan gum-treated soils: from sand to clay
Chang, I., & Cho, G.-C. (2019) · Acta Geotechnica · doi:10.1007/s11440-018-0641-x · Cited by 190
Self-citationAfshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A., & Shokrgozar, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120034 · Cited by 186
Rahgozar, M. A., Saberian, M., & Li, J. (2018) · Transportation Geotechnics · doi:10.1016/j.trgeo.2017.09.004 · Cited by 181
Biopolymer Stabilization of Mine Tailings
Chen, R., Zhang, L., & Budhu, M. (2013) · Journal of Geotechnical and Geoenvironmental Engineering · doi:10.1061/(asce)gt.1943-5606.0000902 · Cited by 174
Biopolymers: Applications and Trends
(2016) · Elsevier eBooks · doi:10.1016/c2014-0-00936-7 · Cited by 172
Stabilization of black cotton soil with lime and iron ore tailings admixture
Etim, R. K., Eberemu, A. O., & Osinubi, K. J. (2017) · Transportation Geotechnics · doi:10.1016/j.trgeo.2017.01.002 · Cited by 172
Life cycle assessment of chitosan production in India and Europe
Muñoz, I., Rodríguez, C., Gillet, D., & M. Moerschbacher, B. (2018) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-017-1290-2 · Cited by 169
Mechanical Effects of Biogenic Nitrogen Gas Bubbles in Soils
Rebata-Landa, V., & Santamarina, J. C. (2012) · Journal of Geotechnical and Geoenvironmental Engineering · doi:10.1061/(asce)gt.1943-5606.0000571 · Cited by 166
Geotechnical Properties of a Low-Plasticity Clay with Biopolymer
Cabalar, A. F., Awraheem, M. H., & Khalaf, M. M. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002380 · Cited by 165
Strength and durability characteristics of biopolymer-treated desert sand
Qureshi, M. U., Chang, I., & Al-Sadarani, K. (2017) · Geomechanics and Engineering · doi:10.12989/gae.2017.12.5.785 · Cited by 157
Self-citationWorld cement production and environmental implications
Uwasu, M., Hara, K., & Yabar, H. (2014) · Environmental Development · doi:10.1016/j.envdev.2014.02.005 · Cited by 154
Natural bio-based products for wood coating and protection against degradation: A Review
Teacă, C., Roşu, D., Mustata, F. R., Rusu, T., Roşu, L., Roșca, I., & Varganici, C. (2019) · BioResources · doi:10.15376/biores.14.2.teaca · Cited by 153
Conventional and alternative technologies for the extraction of algal polysaccharides
Hernández‐Carmona, G., Freile‐Pelegrín, Y., & Hernández-Garibay, E. (2013) · Elsevier eBooks · doi:10.1533/9780857098689.3.475 · Cited by 150
Effect of Exopolymers on the Liquid Limit of Clays and Its Engineering Implications
Nugent, R. A., Zhang, G., & Gambrell, R. P. (2009) · Transportation Research Record Journal of the Transportation Research Board · doi:10.3141/2101-05 · Cited by 147
Lee, S., Chung, M., Park, H. M., Song, K.-I., & Chang, I. (2019) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002909 · Cited by 135
Self-citationStrength durability of gellan gum biopolymer-treated Korean sand with cyclic wetting and drying
Chang, I., Im, J., Lee, S., & Cho, G.-C. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.061 · Cited by 133
Self-citationSharma, M., Satyam, N. D., & Reddy, K. R. (2021) · Engineering Geology · doi:10.1016/j.enggeo.2021.106022 · Cited by 132
Omoregie, A. I., Ngu, L. H., Ong, D. E. L., & Nissom, P. M. (2018) · Biocatalysis and Agricultural Biotechnology · doi:10.1016/j.bcab.2018.11.030 · Cited by 131
Self-citationHeusala, H., Sinkko, T., Sözer, N., Hytönen, E., Mogensen, L., & Knudsen, M. T. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118376 · Cited by 128
Application of demolition wastes mixed with crushed glass and crumb rubber in pavement base/subbase
Saberian, M., Li, J., Boroujeni, M., Law, D. W., & Li, C. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2020.104722 · Cited by 122
Chang, I., Jeon, M.-K., & Cho, G.-C. (2015) · International Journal of Polymer Science · doi:10.1155/2015/326745 · Cited by 117
Self-citationBovine casein as a new soil strengthening binder from diary wastes
Chang, I., Im, J., Chung, M., & Cho, G.-C. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.009 · Cited by 115
Self-citationReview of Fly-Ash-Based Geopolymers for Soil Stabilisation with Special Reference to Clay
Abdullah, H. H., Shahin, M. A., & Walske, M. L. (2020) · Geosciences · doi:10.3390/geosciences10070249 · Cited by 105
Leong, H. Y., Ong, D. E. L., Sanjayan, J. G., & Nazari, A. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002363 · Cited by 102
Self-citationImprovement of loess characteristics using sodium alginate
Zhao, Y., Zhuang, J., Wang, Y., Jia, Y., Niu, P., & Kecheng, J. (2019) · Bulletin of Engineering Geology and the Environment · doi:10.1007/s10064-019-01675-z · Cited by 98
Geotechnical behavior of a beta-1,3/1,6-glucan biopolymer-treated residual soil
Chang, I., & Cho, G.-C. (2014) · Geomechanics and Engineering · doi:10.12989/gae.2014.7.6.633 · Cited by 96
Self-citationChang, I., Lee, M., & Cho, G.-C. (2019) · Energies · doi:10.3390/en12132567 · Cited by 96
Self-citationApplication of novel Persian gum hydrocolloid in soil stabilization
زاده, P. H. G. پ. ح. ق., & Modiri, F. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116639 · Cited by 87
Stoica, M., Antohi, V. M., Zlati, M. L., & Stoica, D. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124013 · Cited by 86
Challenges in Life Cycle Assessment (LCA) of stabilised clay-based construction materials
Marcelino, S., Kinuthia, J. M., Oti, J. E., & Seco, A. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.05.012 · Cited by 78
Saberian, M., Jahandari, S., Li, J., & Zivari, F. (2017) · Journal of Rock Mechanics and Geotechnical Engineering · doi:10.1016/j.jrmge.2017.01.004 · Cited by 77
Jahandari, S., Saberian, M., Tao, Z., Mojtahedi, F. F., Li, J., Ghasemi, M., Rezvani, S. S., & Li, W. (2019) · Cold Regions Science and Technology · doi:10.1016/j.coldregions.2019.02.011 · Cited by 77
Influence of travel behavior on global CO2 emissions
Girod, B., van Vuuren, D. P., & de Vries, B. J. M. (2013) · Transportation Research Part A Policy and Practice · doi:10.1016/j.tra.2013.01.046 · Cited by 73
Castellane, T. C. L., Persona, M. R., Campanharo, J. C., & Lemos, E. G. D. M. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.01.007 · Cited by 72
Laboratory study of using biopolymer to reduce wind erosion
Ayeldeen, M., Negm, A. M., Sawwaf, M. E., & Gädda, T. M. (2016) · International Journal of Geotechnical Engineering · doi:10.1080/19386362.2016.1264692 · Cited by 58
Scown, C. D., Gokhale, A. A., Willems, P. A., Horvath, A., & McKone, T. E. (2014) · Environmental Science & Technology · doi:10.1021/es5012753 · Cited by 55
Leong, H. Y., Ong, D. E. L., Sanjayan, J., Nazari, A., & Kueh, S. M. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002246 · Cited by 50
Self-citationImpact of hydration and gelling properties of guar gum on the mechanism of soil modification
Sujatha, E. R., Sivaraman, S., & Subramani, A. K. (2020) · Arabian Journal of Geosciences · doi:10.1007/s12517-020-06258-x · Cited by 47
Sadeghian, F., Haddad, A., Jahandari, S., Rasekh, H., & Ozbakkaloglu, T. (2020) · Canadian Geotechnical Journal · doi:10.1139/cgj-2019-0650 · Cited by 42
Life cycle assessment of biopolymers
Rosa, A. D. L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100214-8.00004-x · Cited by 41
Control and Stabilization of Fugitive Dust: Using Eco-Friendly and Sustainable Materials
Toufigh, V., & Ghassemi, P. (2020) · International Journal of Geomechanics · doi:10.1061/(asce)gm.1943-5622.0001762 · Cited by 40
Niaounakis, M. (2013) · Elsevier eBooks · doi:10.1016/b978-1-4557-3145-9.00003-8 · Cited by 40
Laboratory analyses of Kaolinite stabilized by vinyl polymers with different monomer types
Ghasemzadeh, P. H., Mehrpajouh, A., & Pishvaei, M. (2020) · Engineering Geology · doi:10.1016/j.enggeo.2020.105938 · Cited by 39
Comprehensive review of geosynthetic clay liner and compacted clay liner
Shankar, M. U., & Muthukumar, M. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/263/3/032026 · Cited by 33
Biological soil improvement using new environmental bacteria isolated from northern Iran
Bahmani, M., Fatehi, H., Noorzad, A., & Hamedi, J. (2019) · Environmental Geotechnics · doi:10.1680/jenge.18.00176 · Cited by 33
Self-citationLeong, H. Y., Ong, D. E. L., Sanjayan, J., & Nazari, A. (2015) · RSC Advances · doi:10.1039/c5ra16286f · Cited by 32
Self-citationAllwood, J. W., Martin, P. M., Yun Xu, A., Cowan, A. A., Pont, S., Griffiths, I., Sungurtas, J., Clarke, S., Goodacre, R., Marshall, A., et al. (2021) · Food Chemistry · doi:10.1016/j.foodchem.2021.129585 · Cited by 29
Production of micro- and nanoscale chitosan particles for biomedical applications
Jayasuriya, A. C. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100230-8.00008-x · Cited by 23
Li, M., Xie, D., Shu, Q., Ou, H., & Guo, X. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.109 · Cited by 20
Lab‐scale atmospheric CO2 absorption for calcium carbonate precipitation in sand
Ngu, L. H., Song, J. W., Hashim, S. S., & Ong, D. E. L. (2019) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.1869 · Cited by 20
Self-citationZhang, J., Han, Y., Wang, X., & Bian, H. (2021) · International Journal of Geomechanics · doi:10.1061/(asce)gm.1943-5622.0002018 · Cited by 20
The Usability of Clay/Pumice Mixtures Modified with Biopolymer as an Impermeable Liner
ALBAYRAK, Z. N. K., & Gencer, G. (2020) · KSCE Journal of Civil Engineering · doi:10.1007/s12205-020-1053-7 · Cited by 17
Post-Fire Mudflow Prevention by Biopolymer Treatment of Water Repellent Slopes
Movasat, M., & Tomac, I. (2020) · ASCE Geo-Congress · doi:10.1061/9780784482834.019 · Cited by 8
Plasticity and Strength Characteristics of Expansive Soil Treated with Xanthan Gum Biopolymer
Singh, S. P., Das, R., & Seth, D. (2020) · Lecture notes in civil engineering · doi:10.1007/978-981-15-6237-2_54 · Cited by 8
Metadata
- Authors
- Fatehi, H., Ong, D. E. L., Yu, J., & Chang, I.
- Venue
- Geosciences
- Publisher
- MDPI AG
- Published
- 2021-07-15
- Volume
- 11
- Issue
- 7
- Pages
- 291
- ISSN
- 2076-3263 (ISSN-L)
- OpenAlex
- W3178552280
- Cited by
- 261
- References
- 95
- FWCI
- 16.73
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.