The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel
Open accessAbstract
Binder jet additive manufacturing enables the production of complex components for numerous applications. Binder jetting is the only powder bed additive manufacturing process that is not fusion-based, thus manufactured parts have no residual stresses as opposed to laser-based additive manufacturing processes. Binder jet technology can be adopted for the production of various small and large metallic parts for specific applications, including in the biomedical and energy sectors, at a lower cost and shorter lead time. One of the most well-known types of stainless steels for various industries is 316L, which has been extensively manufactured using binder jet technology. Binder jet manufactured 316L parts have obtained near full density and, in some cases, similar mechanical properties compared to conventionally manufactured parts. This article introduces methods, principles, and applications of binder jetting of SS 316L. Details of binder jetting processes, including powder characteristics (shape and size), binder properties (binder chemistry and droplet formation mechanism), printing process parameters (such as layer thickness, binder saturation, drying time), and post-processing sintering mechanism and densification processes, are carefully reviewed. Furthermore, critical factors in the selection of feedstock, printing parameters, sintering temperature, time, atmosphere, and heating rate of 316L binder jet manufactured parts are highlighted and summarized. Finally, the above-mentioned processing parameters are correlated with final density and mechanical properties of 316L components to establish a guideline on feedstock selection and process parameters optimization to achieve desired density, structure and properties for various applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials
Coble, R. L. (1963) · Journal of Applied Physics · doi:10.1063/1.1702656 · Cited by 2,333
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Reducing porosity in AlSi10Mg parts processed by selective laser melting
Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., & Tuck, C. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.001 · Cited by 1,281
Effect of Change of Scale on Sintering Phenomena
Herring, C. (1950) · Journal of Applied Physics · doi:10.1063/1.1699658 · Cited by 1,045
Mechanical Packing of Spherical Particles
McGEARY, R. K. (1961) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1961.tb13716.x · Cited by 1,044
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
Gokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
Making sense of 3-D printing: Creating a map of additive manufacturing products and services
Conner, B. P., Manogharan, G. P., Martof, A. N., Rodomsky, L. M., Rodomsky, C. M., Jordan, D. C., & Limperos, J. W. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.005 · Cited by 750
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016) · JOM · doi:10.1007/s11837-015-1810-0 · Cited by 630
A first report on sintering diagrams
Ashby, M. F. (1974) · Acta Metallurgica · doi:10.1016/0001-6160(74)90167-9 · Cited by 604
Castellanos, A. (2005) · Advances in Physics · doi:10.1080/17461390500402657 · Cited by 555
A review of process development steps for new material systems in three dimensional printing (3DP)
Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548
Li, R., Shi, Y., Wang, Z., Wang, L., Liu, J., & Jiang, W. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.02.030 · Cited by 473
Tan, J. H., Wong, W. L. E., & Dalgarno, K. W. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.011 · Cited by 407
Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing
Mueller, B. (2012) · Assembly Automation · doi:10.1108/aa.2012.03332baa.010 · Cited by 359
Ghaffar, S. H., Corker, J., & Fan, M. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.05.005 · Cited by 358
Sutton, A. T., Kriewall, C. S., Leu, M. C., & Newkirk, J. W. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1250605 · Cited by 354
Infrared thermography of welding zones produced by polymer extrusion additive manufacturing
Seppala, J. E., & Migler, K. B. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.007 · Cited by 322
Sintering of advanced materials
Fang, Z. Z. (2010) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845699949 · Cited by 306
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Lv, X., Ye, F., Cheng, L., Fan, S., & Liu, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.012 · Cited by 302
The effect of particle size distribution on packing density
Sohn, H. Y., & Moreland, C. (1968) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450460305 · Cited by 298
Farzadi, A., Solati-Hashjin, M., Asadi-Eydivand, M., & Abu Osman, N. A. (2014) · PLoS ONE · doi:10.1371/journal.pone.0108252 · Cited by 284
Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V
Alcisto, J., Enriquez, A., Garcia, H., Hinkson, S., Steelman, T., Silverman, E. M., Valdovino, P., Gigerenzer, H., Foyos, J., Ogren, J. R., et al. (2010) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-010-9670-9 · Cited by 284
Nandwana, P., Elliott, A. M., Siddel, D., Merriman, A., Peter, W. H., & Babu, S. S. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.002 · Cited by 249
Zhou, Z., Buchanan, F., Mitchell, C., & Dunne, N. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.027 · Cited by 241
Three-Dimensional Printing Techniques
Demirak, O., Gokyer, S., Ergene, E., & Yilgor, P. (2025) · Biological and Medical Physics, Biomedical Engineering · doi:10.1007/978-3-031-90966-5_3 · Cited by 225
Butscher, A., Bohner, M., Roth, C., Ernstberger, A., Heuberger, R., Doebelin, N., Rudolf von Rohr, P., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.027 · Cited by 224
Chen, H., & Zhao, Y. F. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2014-0149 · Cited by 204
Process development toward full-density stainless steel parts with binder jetting printing
Do, T., Kwon, P., & Shin, C. S. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.04.006 · Cited by 201
Energy and Material Flow Analysis of Binder-jetting Additive Manufacturing Processes
Meteyer, S., Xu, X., Perry, N., & Zhao, Y. F. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.06.030 · Cited by 192
Powder bed binder jet printed alloy 625: Densification, microstructure and mechanical properties
Mostafaei, A., Stevens, E. L., Hughes, E. T., Biery, S. D., Hilla, C., & Chmielus, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.06.067 · Cited by 192
Thermoplastic 3D Printing—An Additive Manufacturing Method for Producing Dense Ceramics
Scheithauer, U., Schwarzer, E., Richter, H., & Moritz, T. (2014) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12306 · Cited by 177
Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting
Prashanth, K. G., Shahabi, H. S., Attar, H., et al. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.01.001 · Cited by 174
Further studies in selective laser melting of stainless and tool steel powders
Badrossamay, M., & Childs, T. H. C. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.09.013 · Cited by 174
Mostafaei, A., Toman, J., Stevens, E. L., Hughes, E. T., Krimer, Y. L., & Chmielus, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.021 · Cited by 169
Optimization of Binder Jetting Using Taguchi Method
Shrestha, S., & Manogharan, G. P. (2017) · JOM · doi:10.1007/s11837-016-2231-4 · Cited by 145
Binder jetting additive manufacturing with a particle-free metal ink as a binder precursor
Bai, Y., & Williams, C. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.027 · Cited by 126
Pasebani, S., Ghayoor, M., Badwe, S., Irrinki, H., & Atre, S. V. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.011 · Cited by 119
Self-citationMoisture based three-dimensional printing of calcium phosphate structures for scaffold engineering
Butscher, A., Bohner, M., Doebelin, N., Galea, L., Loeffel, O., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.009 · Cited by 111
Hydrogen embrittlement of 316L type stainless steel
Herms, E., Olivé, J.-M., & Puiggali, M. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(99)00319-6 · Cited by 104
Binder-Jet Printing of Fine Stainless Steel Powder with Varied Final Density
Ziaee, M., Tridas, E., & Crane, N. B. (2016) · JOM · doi:10.1007/s11837-016-2177-6 · Cited by 96
Optimising metal powders for additive manufacturing
Clayton, J. (2014) · Metal Powder Report · doi:10.1016/s0026-0657(14)70223-1 · Cited by 93
Simchi, A., Rota, A., & Imgrund, P. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.03.032 · Cited by 82
Elastic modulus of 316 stainless steel lattice structure fabricated via binder jetting process
Tang, Y., Zhou, Y., Hoff, T., Garon, M., & Zhao, Y. F. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000084 · Cited by 74
Kinetics and mechanisms of densification
Rahaman, M. N. (2010) · Elsevier eBooks · doi:10.1533/9781845699949.1.33 · Cited by 71
Oxidation resistance of sintered stainless steels: effect of yttria additions
Bautista, A., Velasco, F., & Abenójar, J. (2003) · Corrosion Science · doi:10.1016/s0010-938x(02)00217-2 · Cited by 71
Feasibility Study of an Extrusion-based Direct Metal Additive Manufacturing Technique
Annoni, M., Giberti, H., & Strano, M. (2016) · Procedia Manufacturing · doi:10.1016/j.promfg.2016.08.079 · Cited by 65
Strengthening of ferrous binder jet 3D printed components through bronze infiltration
Cordero, Z. C., Siddel, D., Peter, W. H., & Elliott, A. M. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.011 · Cited by 58
Suwanprateeb, J. (2005) · Polymer International · doi:10.1002/pi.1918 · Cited by 49
Sintering kinetics for a model final-stage microstructure: A study of AI2O3
Zhao, J., & Harmer, M. P. (1991) · Philosophical Magazine Letters · doi:10.1080/09500839108206594 · Cited by 48
Additively Manufactured Full-Density Stainless Steel 316L With Binder Jet Printing
Do, T., Bauder, T. J., Suen, H., et al. (2018) · doi:10.1115/msec2018-6681 · Cited by 41
Additive Manufacturing Technologies: Technology Introduction and Business Implications
Stucker, B. E. (2011) · Cited by 32
Additive manufacturing of metal-ceramic-composites by thermoplastic 3D-printing (3DTP)
Scheithauer, U., Slawik, T., Schwarzer, E., Richter, H.-J., Moritz, T., & Michaelis, A. (2015) · Fraunhofer-Publica (Fraunhofer-Gesellschaft) · doi:10.4416/jcst2014-00045 · Cited by 23
Ghayoor, M., Badwe, S., Irrinki, H., Atre, S. V., & Pasebani, S. (2018) · Materials science forum · doi:10.4028/www.scientific.net/msf.941.698 · Cited by 17
Self-citationKim, B., Suzuki, T., Morita, K., Yoshida, H., Li, J., & Matsubara, H. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.12.007 · Cited by 11
Cited by
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100707 · Cited by 1,093
Additive Manufacturing: A Comprehensive Review
Zhou, L., Miller, J., Vezza, J., Mayster, M., Raffay, M., Justice, Q., Al Tamimi, Z., Hansotte, G., Sunkara, L. D., & Bernat, J. (2024) · Sensors · doi:10.3390/s24092668 · Cited by 599
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
Metal Binder Jetting Additive Manufacturing: A Literature Review
Li, M., Du, W., Elwany, A., Pei, Z., & Ma, C. (2020) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4047430 · Cited by 334
Metadata
- Authors
- Mirzababaei, S., & Pasebani, S.
- Venue
- Journal of Manufacturing and Materials Processing
- Publisher
- MDPI AG
- Published
- 2019-09-09
- Volume
- 3
- Issue
- 3
- Pages
- 82
- ISSN
- 2504-4494 (ISSN-L)
- OpenAlex
- W2972906558
- Cited by
- 290
- References
- 65
- FWCI
- 14.24
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.