Polymeric Micelles of Biodegradable Diblock Copolymers: Enhanced Encapsulation of Hydrophobic Drugs
Open accessThe DOI matches its Crossref record; 144 of the 144 references it cites were found in a registry or an index.
Abstract
Polymeric micelles are potentially efficient in encapsulating and performing the controlled release of various hydrophobic drug molecules. Understanding the fundamental physicochemical properties behind drug–polymer systems in terms of interaction strength and compatibility, drug partition coefficient (preferential solubilization), micelle size, morphology, etc., encourages the formulation of polymeric nanocarriers with enhanced drug encapsulating capacity, prolonged circulation time, and stability in the human body. In this review, we systematically address some open issues which are considered to be obstacles inhibiting the commercial availability of polymer-based therapeutics, such as the enhancement of encapsulation capacity by finding better drug–polymer compatibility, the drug-release kinetics and mechanisms under chemical and mechanical conditions simulating to physiological conditions, and the role of preparation methods and solvents on the overall performance of micelles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Itinerary of a drug carrier after intravenous administration. Adapted with permission from [13]. RES: reticuloendothelial system.](https://figures.cochat.ai/paper-figures/91eedb6ba32e41839c8280d3ba2fb772/polymeric-micelles-of-biodegradable-diblock-copolymers-enhanced-encapsulation-of-figure-2.jpg)

Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The selection of applicable manufacturing processes may impact characteristics of the final polymeric micelle formulation such as drug loading, size distribution, and stability in aqueous media, which are critical factors for translation [262].”
From Polymeric micelles for the delivery of poorly soluble drugs: From nanoformulation to clinical approval. (2020) · cites this paper as [262]
In the citing paper
“Polymer micelles can simply physically encapsulate (solubilize) hydrophobic drugs in their hydrophobic core effectively, resulting in the following advantages: (i) elimination of drug side effects; (ii) Increase the water solubility of hydrophobic and insoluble drugs; (iii) Control of drug release rate; (iv) Protect drug molecules from degradation by specific media (pH, temperature).”
From Smart nanoparticles for cancer therapy (2023) · cites this paper as [37]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lipinski, C. A., Lombardo, F., Dominy, B. W., & Feeney, P. J. (2001) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(00)00129-0 · Cited by 18,139
Drug-like properties and the causes of poor solubility and poor permeability
Lipinski, C. A. (2000) · Journal of Pharmacological and Toxicological Methods · doi:10.1016/s1056-8719(00)00107-6 · Cited by 3,734
Discher, D. E., & Eisenberg, A. (2002) · Science · doi:10.1126/science.1074972 · Cited by 3,551
Kamaly, N., Yameen, B., Wu, J., & Farokhzad, O. C. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00346 · Cited by 3,070
Biodegradable Long-Circulating Polymeric Nanospheres
Gref, R., Minamitake, Y., Peracchia, M. T., Trubetskoy, V., Torchilin, V., & Langer, R. (1994) · Science · doi:10.1126/science.8128245 · Cited by 2,920 · cited 5×
“Moreover, it is speculated that PEG-PLGA micelles will exhibit higher LE than 92% due to χPLGA-PTX χPVL-PTX, as illustrated in Table 6.”
BackgroundInfluentialMicellization of block copolymers
Riess, G. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(03)00015-7 · Cited by 1,953 · cited 1×
“The application of theoretical models to predict the evolution of the morphology of aggregates in block copolymers systems is experimentally restricted [6].”
Micellar Nanocarriers: Pharmaceutical Perspectives
Torchilin, V. P. (2006) · Pharmaceutical Research · doi:10.1007/s11095-006-9132-0 · Cited by 1,910
A method for estimating both the solubility parameters and molar volumes of liquids
Fedors, R. F. (1974) · Polymer Engineering & Science · doi:10.1002/pen.760140211 · Cited by 1,779 · cited 2×
“Instead, indirect methods can be used to calculate them, including Fedors [133], Hoy [134], Hansen [135], and Hoftyzer-Krevelen [132] methods.”
MethodProtein—surface interactions in the presence of polyethylene oxide
Jeon, S. I., Lee, J. H., Andrade, J. D., & De Gennes, P. G. (1991) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(91)90043-8 · Cited by 1,523
Block copolymer micelles: preparation, characterization and application in drug delivery
Gaucher, G., Dufresne, M.-H., Sant, V. P., Kang, N., Maysinger, D., & Leroux, J.-C. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.09.034 · Cited by 1,498
Poly(Ethylene Glycol) Chemistry: Biotechnical and Biomedical Applications
(1992) · Springer eBooks · doi:10.1007/978-1-4899-0703-5 · Cited by 1,420
Nano-engineering block copolymer aggregates for drug delivery
Allen, C., Maysinger, D., & Eisenberg, A. (1999) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/s0927-7765(99)00058-2 · Cited by 1,358 · cited 10×
“As the core-forming block lengths increase, the partition coefficient was found to increase and hence the drug-loading efficiency increased [29,59,66].”
BackgroundInfluentialLiposome formulations with prolonged circulation time in blood and enhanced uptake by tumors.
Gabizon, A., & Papahadjopoulos, D. (1988) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.85.18.6949 · Cited by 1,131 · cited 1×
“Due to steric repulsion [119], the outer PEG shell of the micelle inhibits the surface adsorption of proteins and other biological components in the bloodstream so that there is no recognition by the RES (such as the liver, kidney, or spleen) [114], achieving higher circulation half-time in the body [101,120,121] and…”
BackgroundSupramolecular Materials via Block Copolymer Self-Assembly
Klok, H.-A., & Lecommandoux, S. (2001) · Advanced Materials · doi:10.1002/1521-4095(200108)13:16<1217::aid-adma1217>3.0.co;2-d · Cited by 1,001 · cited 1×
“This confirms the fact that the crystallinity of the core-forming blocks significantly contributes to the micellar stability and may confer greater drug retention properties by decreasing the rate of drug diffusion from the micellar core [126,127], because the drug molecules diffuse more slowly from a frozen (glassy)…”
BackgroundOwen, S. C., Chan, D. P. Y., & Shoichet, M. S. (2012) · Nano Today · doi:10.1016/j.nantod.2012.01.002 · Cited by 911 · cited 1×
“Other factors are thoroughly reviewed elsewhere [14].”
Block copolymer micelles as long-circulating drug vehicles
Kwon, G. S., & Kataoka, K. (1995) · Advanced Drug Delivery Reviews · doi:10.1016/0169-409x(95)00031-2 · Cited by 823 · cited 1×
“To obtain polymeric micelles that exhibit stable circulation in the bloodstream, the hydrophilic corona-forming block of PEG needs to be regulated at a MW of 5 to 12 kDa, and the length of it should preferably be greater than that of the core-forming block [42].”
BackgroundSynthesis and characterization of PLGA nanoparticles
Astete, C. E., & Sabliov, C. M. (2006) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856206775997322 · Cited by 776 · cited 1×
“5 Amorphous [35] PLGA 40–60 Amorphous [129] PBLA Amorphous [87] PBLG 50 [130]”
BackgroundBae, Y., Nishiyama, N., Fukushima, S., Koyama, H., Yasuhiro, M., & Kataoka, K. (2005) · Bioconjugate Chemistry · doi:10.1021/bc0498166 · Cited by 742
In vivo evaluation of polymeric micellar paclitaxel formulation: toxicity and efficacy
Kim, S. C., Kim, D. W., Shim, Y. H., Bang, J. S., Oh, H. S., Kim, S. W., & Seo, M. H. (2001) · Journal of Controlled Release · doi:10.1016/s0168-3659(01)00275-9 · Cited by 734 · cited 1×
“Indeed, PEG-PVL micelles have been found to encapsulate 92% of Paclitaxel [99], whereas PEG-PDLLA and PEG-PCL micelles exhibited LE of 25% [36] and 38% [89], respectively.”
BackgroundLong circulating microparticulate drug carriers
Stolnik, S., Illum, L., & Davis, S. S. (1995) · Advanced Drug Delivery Reviews · doi:10.1016/0169-409x(95)00025-3 · Cited by 700 · cited 1×
“This can be overcome when corona-forming blocks are highly biocompatible [31] and the total molecular weight of the block copolymer is higher than 42–50 kDa—the molecular weight threshold for water-soluble synthetic polymers to be filtered or recognized [32].”
BackgroundShuai, X., Ai, H., Nasongkla, N., Kim, S., & Gao, J. (2004) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.06.003 · Cited by 695
Bae, Y., & Kataoka, K. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.04.016 · Cited by 669
Stepwise polyelectrolyte assembly on particle surfaces: a novel approach to colloid design
Sukhorukov, G. B., Donath, E., Davis, S., Lichtenfeld, H., Caruso, F., Popov, V. I., & Möhwald, H. (1998) · Polymers for Advanced Technologies · doi:10.1002/(sici)1099-1581(1998100)9:10/11<759::aid-pat846>3.0.co;2-q · Cited by 657
Nanonization strategies for poorly water-soluble drugs
Chen, H., Khemtong, C., Yang, X., Chang, X., & Gao, J. (2011) · Drug Discovery Today · doi:10.1016/j.drudis.2010.02.009 · Cited by 642
Kataoka, K., Matsumoto, T., Yokoyama, M., Okano, T., Sakurai, Y., Fukushima, S., Okamoto, K., & Kwon, G. S. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00133-9 · Cited by 613 · cited 8×
“This faster release of Doxorubicin in an acidic medium was also observed by Kataoka and coworkers [105] with the Doxorubicin-loaded PEG-PBLA micelles and is likely due to the re-protonation of the amino group of Doxorubicin and the faster degradation of the micelle core at a lower pH.”
BackgroundInfluentialTargeted polymeric micelles for delivery of poorly soluble drugs
Torchilin, V. P. (2004) · Cellular and Molecular Life Sciences · doi:10.1007/s00018-004-4153-5 · Cited by 543
Zeng, J., Yang, L., Liang, Q., Zhang, X., Guan, H., Xu, X., Chen, X., & Jing, X. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.02.024 · Cited by 484 · cited 1×
“help in the design of polymeric micelles as delivery systems [29,131].”
BackgroundRecent advances in polymeric micelles for anti-cancer drug delivery
Biswas, S., Kumari, P., Lakhani, P. M., & Ghosh, B. (2016) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2015.12.031 · Cited by 471
Zhang, L., & Eisenberg, A. (1998) · Polymers for Advanced Technologies · doi:10.1002/(sici)1099-1581(1998100)9:10/11<677::aid-pat845>3.0.co;2-# · Cited by 470 · cited 1×
“The polymeric micelle consists of two distinct regions—an interior region of hydrophobic polymer chains (the core region) and an outer region of well-solvated hydrophilic polymer chains (the corona or shell region; Figure 1), which imparts colloidal stability [8,9].”
BackgroundKabanov, A. V., Nazarova, I. R., Astafieva, I. V., Batrakova, E. V., Alakhov, V. Y., Yaroslavov, A. A., & Kabanov, V. A. (1995) · Macromolecules · doi:10.1021/ma00111a026 · Cited by 459 · cited 2×
“It is simply defined as the ratio between the drug concentration in the micelle core to its concentration in the external aqueous solution [113].”
BackgroundAlmgren, M., Brown, W., & Hvidt, S. (1995) · Colloid & Polymer Science · doi:10.1007/bf00655668 · Cited by 446
Seymour, L. W., Duncan, R., Strohalm, J., & Kopeček, J. (1987) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820211106 · Cited by 436 · cited 2×
“The molecular weight of the block copolymer should exceed a threshold value (42–50 kDa for water-soluble synthetic polymers [32]) to avoid a possible glomerular (renal) filtration in the human body.”
Background(1991) · PubMed · Cited by 418
Kwon, G., Suwa, S., Yokoyama, M., Okano, T., Sakurai, Y., & Kataoka, K. (1994) · Journal of Controlled Release · doi:10.1016/0168-3659(94)90118-x · Cited by 409 · cited 11×
“This faster release of Doxorubicin in an acidic medium was also observed by Kataoka and coworkers [105] with the Doxorubicin-loaded PEG-PBLA micelles and is likely due to the re-protonation of the amino group of Doxorubicin and the faster degradation of the micelle core at a lower pH.”
BackgroundInfluentialDevelopment of amphiphilic diblock copolymers as micellar carriers of taxol
Zhang, X., Jackson, J. K., & Burt, H. M. (1996) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(95)04386-1 · Cited by 402 · cited 5×
“In the next paragraphs, detailed descriptions for each parameter and its impact on the micellar stability, enhanced drug solubility (loading efficiency), and release rate [45,66,86,107] is discussed.”
BackgroundInfluentialMicelles based on AB block copolymers of poly (ethylene oxide) and poly (beta.-benzyl L-aspartate)
Kwon, G., Naito, M., Yokoyama, M., Okano, T., Sakurai, Y., & Kataoka, K. (1993) · Langmuir · doi:10.1021/la00028a012 · Cited by 399 · cited 10×
“It is obvious that at a constant hydrophilic block length, the CMC decreases as the hydrophobic/hydrophilic ratio (or hydrophobic length) increases [12,35,61,106].”
BackgroundInfluentialPreparation of block copolymer vesicles in solution
Lim Soo, P., & Eisenberg, A. (2004) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10739 · Cited by 394
Polymer vesicles: Mechanism, preparation, application, and responsive behavior
Zhu, Y., Yang, B., Chen, S., & Du, J. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.05.001 · Cited by 392
Zhou, S., Deng, X., & Yang, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00207-2 · Cited by 383
La, S. B., Okano, T., & Kataoka, K. (1996) · Journal of Pharmaceutical Sciences · doi:10.1021/js950204r · Cited by 379
Coulembier, O., Degée, P., Hedrick, J. L., & Dubois, P. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.08.004 · Cited by 375 · cited 1×
“PCL −60 Semicrystalline [128] PVL −47 to −70 Semicrystalline [106] PDLLA 34.”
BackgroundLiu, J., Xiao, Y., & Allen, C. (2004) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.10533 · Cited by 358 · cited 7×
“5, the size of the PEG5000-PCL4000 micelle showed a negligible change (20–24 nm), and the loading efficiency decreased from 72% to 65%, whereas, the size of the PEG5000-PDLLA4000 micelle strongly increased from 66 nm to 115 nm [87].”
BackgroundMethodInfluentialBiodegradable poly(ɛ-caprolactone)–poly(ethylene glycol) copolymers as drug delivery system
Wei, X., Gong, C., Gou, M., Fu, S., Guo, Q., Shi, S., Luo, F., Guo, G., Qiu, L., & Qian, Z. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2009.07.033 · Cited by 352
Core-cross-linked polymeric micelles as paclitaxel carriers
Shuai, X., Merdan, T., Schaper, A. K., Xi, F., & Kissel, T. (2004) · Bioconjugate Chemistry · doi:10.1021/bc034113u · Cited by 333 · cited 15×
“Significant variation of the micelle size (from 114 to 181 nm) and size distribution was noticed when using four different solvents to prepare MPEG-PCL micelles using dialysis [48].”
BackgroundInfluentialKim, S. Y., Shin, I. G., Lee, Y. M., Cho, C. S., & Sung, Y. K. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00124-7 · Cited by 330 · cited 3×
“The size and polydispersity of loaded micelles, as well as the loading efficiency, depend on the drug/polymer weight ratio [47,48,86].”
BackgroundMethodMosqueira, V. C. F., Legrand, P., Gulik, A., Bourdon, O., Gref, R., Labarre, D., & Barratt, G. (2001) · Biomaterials · doi:10.1016/s0142-9612(01)00043-6 · Cited by 325 · cited 1×
“Increasing the amount of PEG reduces the polydispersity of the system, and a more hydrophobic and complex core would demand a higher chain length and density of PEG (more bound water in the surrounding medium) to obtain the optimal colloidal steric stabilization [88].”
BackgroundBlock copolymer micelles for drug delivery: loading and release of doxorubicin
Kwon, G., Naito, M., Yokoyama, M., Okano, T., Sakurai, Y., & Kataoka, K. (1997) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00039-4 · Cited by 320 · cited 9×
“This faster release of Doxorubicin in an acidic medium was also observed by Kataoka and coworkers [105] with the Doxorubicin-loaded PEG-PBLA micelles and is likely due to the re-protonation of the amino group of Doxorubicin and the faster degradation of the micelle core at a lower pH.”
InfluentialHagan, S. A., Coombes, A. G. A., Garnett, M. C., Dunn, S. E., Davies, M. C., Illum, L., Davis, S. S., Harding, S. E., Purkiss, S., & Gellert, P. R. (1996) · Langmuir · doi:10.1021/la950649v · Cited by 319 · cited 2×
“Larger PEG-PCL micelles with lower drug-loading efficiency were formed in absence of ultrasonication, compared with those prepared under ultrasonication [138].”
BackgroundResultYokoyama, M. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00115-6 · Cited by 308 · cited 2×
“Both centrifugation and extrusion were found to decrease strongly the amount of loaded drug [111,142].”
BackgroundKabanov, A. V., Chekhonin, V. P., Alakhov, V. Y., Batrakova, E. V., Lebedev, A. S., Melik-Nubarov, N. S., Arzhakov, S. A., Levashov, A. V., Morozov, G. V., Severin, E. S., et al. (1989) · FEBS Letters · doi:10.1016/0014-5793(89)81689-8 · Cited by 296 · cited 2×
“[36], the study of polymeric micelle drug carrier systems started [37–39], and these carrier systems were recognized as one of the most potent drug carrier types in the 1990s [10,12,29,40–50] after the leading trials for the enhancement in in vivo pharmacological activities [39,51] and targeting [40,52] of drugs throu…”
BackgroundWatersoluble polymers in medicine
Bader, H., Ringsdorf, H., & Schmidt, B. (1984) · Die Angewandte Makromolekulare Chemie · doi:10.1002/apmc.1984.051230121 · Cited by 291 · cited 3×
“[36], the study of polymeric micelle drug carrier systems started [37–39], and these carrier systems were recognized as one of the most potent drug carrier types in the 1990s [10,12,29,40–50] after the leading trials for the enhancement in in vivo pharmacological activities [39,51] and targeting [40,52] of drugs throu…”
BackgroundHydrotropic polymer micelle system for delivery of paclitaxel
Huh, K. M., Lee, S. C., Cho, Y. W., Lee, J., Jeong, J. H., & Park, K. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.07.003 · Cited by 291 · cited 2×
“As the hydrophobicity of the core-forming blocks increases, the release rate decreases [64,65], and the thermodynamic stability of micelles”
BackgroundMicellization of Ionic Block Copolymers
Moffitt, M., Khougaz, K., & Eisenberg, A. (1996) · Accounts of Chemical Research · doi:10.1021/ar940080 · Cited by 291
Min, K. H., Kim, J.-H., Bae, S. M., Shin, H., Kim, M. S., Park, S., Lee, H., Park, R.-W., Kim, I.-S., Kim, K., et al. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.02.024 · Cited by 287
Physical Entrapment of Adriamycin in AB Block Copolymer Micelles
Kwon, G. S., Naito, M., Yokoyama, M., Okano, T., Sakurai, Y., & Kataoka, K. (1995) · Pharmaceutical Research · doi:10.1023/a:1016266523505 · Cited by 281 · cited 8×
“This faster release of Doxorubicin in an acidic medium was also observed by Kataoka and coworkers [105] with the Doxorubicin-loaded PEG-PBLA micelles and is likely due to the re-protonation of the amino group of Doxorubicin and the faster degradation of the micelle core at a lower pH.”
InfluentialAllen, C., Yu, Y., Maysinger, D., & Eisenberg, A. (1998) · Bioconjugate Chemistry · doi:10.1021/bc9702157 · Cited by 273 · cited 1×
“Increasing the temperature from 20 to 37 ◦C has been found to increase the partition coefficient as a result of the decrease in the degree of hydration of the core-forming block at the higher temperature [46].”
BackgroundControlled Surface-Initiated Polymerizations in Aqueous Media
Jones, D. M., & Huck, W. T. S. (2001) · Advanced Materials · doi:10.1002/1521-4095(200108)13:16<1256::aid-adma1256>3.0.co;2-b · Cited by 272
Gyun Shin, I., Yeon Kim, S., Moo Lee, Y., Soo Cho, C., & Sung, Y. K. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00164-8 · Cited by 269
Core-Polymerized Reactive Micelles from Heterotelechelic Amphiphilic Block Copolymers
Iijima, M., Nagasaki, Y., Okada, T., Kato, M., & Kataoka, K. (1999) · Macromolecules · doi:10.1021/ma9815962 · Cited by 265
Cohesive Properties and Solubility
Van Krevelen, D. W., & Te Nijenhuis, K. (2009) · Properties of Polymers · doi:10.1016/b978-0-08-054819-7.00007-8 · Cited by 259 · cited 4×
“Therefore, the methods of Hoy and Hoftyzer-van Krevelen are superior to the other methods, and each of them predicts the solubility parameters with a mean accuracy of about 10% [132].”
MethodResultInfluentialBurt, H. M., Zhang, X., Toleikis, P., Embree, L., & Hunter, W. L. (1999) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/s0927-7765(99)00067-3 · Cited by 254 · cited 2×
“, is less frozen) imparting a lower kinetic stability of PEG-PDLLA polymeric micelles [125].”
BackgroundLetchford, K., Liggins, R., & Burt, H. (2008) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21037 · Cited by 254 · cited 10×
“In the next paragraphs, detailed descriptions for each parameter and its impact on the micellar stability, enhanced drug solubility (loading efficiency), and release rate [45,66,86,107] is discussed.”
BackgroundMethodInfluentialYasugi, K., Nagasaki, Y., Kato, M., & Kataoka, K. (1999) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00028-0 · Cited by 249 · cited 6×
“It is obvious that at a constant hydrophilic block length, the CMC decreases as the hydrophobic/hydrophilic ratio (or hydrophobic length) increases [12,35,61,106].”
BackgroundInfluentialNagasaki, Y., Okada, T., Scholz, C., Iijima, M., Kato, M., & Kataoka, K. (1998) · Macromolecules · doi:10.1021/ma971294k · Cited by 245 · cited 1×
“1 Dialysis 33 ND ND ND [91] PEG91000-PDLLA56000 0.”
Multi-drug loaded polymeric micelles for simultaneous delivery of poorly soluble anticancer drugs
Shin, H.-C., Alani, A. W. G., Rao, D. A., Rockich, N. C., & Kwon, G. S. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.04.024 · Cited by 243
Hurter, P. N., & Hatton, T. A. (1992) · Langmuir · doi:10.1021/la00041a010 · Cited by 238 · cited 1×
“In general, an increase in the corona block will result in an increase in the CMC [106], followed by a decrease in the aggregation number (Nagg), and ultimately, smaller micelles [112] possessing water molecules at the corona [122] will be formed.”
BackgroundLukyanov, A. N., Gao, Z., Mazzola, L., & Torchilin, V. P. (2002) · Pharmaceutical Research · doi:10.1023/a:1020488012264 · Cited by 227 · cited 1×
“Also, it appears that smaller micelles might show a high accessibility to tumor tissues [33,34].”
BackgroundYokoyama, M. (2010) · Expert Opinion on Drug Delivery · doi:10.1517/17425240903436479 · Cited by 224 · cited 2×
“Furthermore, in some methods, the drug incorporation may be difficult on a large industrial scale but easy and efficient on a small laboratory scale [76].”
BackgroundBlock Copolymers: Synthetic Strategies, Physical Properties, and Applications
Hadjichristidis, N., Pispas, S., & Floudas, G. (2002) · doi:10.1002/0471269808 · Cited by 223 · cited 2×
“, linear diblock and triblock copolymers, star block copolymers, and miktoarm star copolymers) [1].”
BackgroundClonazepam release from core-shell type nanoparticles in vitro
Jeong, Y.-I., Cheon, J.-B., Kim, S.-H., Nah, J.-W., Lee, Y.-M., Sung, Y.-K., Akaike, T., & Cho, C.-S. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00163-6 · Cited by 221 · cited 9×
“For example, Cyclosporine A is expected to be efficiently encapsulated in PEG-PBLG micelles in much higher rates than in other polymeric micelles.”
BackgroundResultInfluentialLim Soo, P., Luo, L., Maysinger, D., & Eisenberg, A. (2002) · Langmuir · doi:10.1021/la026339b · Cited by 221 · cited 5×
“Tg has an appreciable effect on the solubilization capacity, because the partition coefficient increases with longer hydrophobic blocks, and then, the solubilization capacity increases [59].”
BackgroundInfluentialHansen, C. M. (1967) · Medical Entomology and Zoology · Cited by 217
Nishiyama, N., & Kataoka, K. (2005) · Advances in Polymer Science · doi:10.1007/12_025 · Cited by 216 · cited 10×
“Diblock copolymers are characterized by their lower CMC [18] and hence, more thermodynamic stability [29], as well as higher drug-loading capacity [18], than triblock copolymers at the same molecular weight or HLB. Neutrally charged spherical micelles, with their relatively smaller size and polydispersity compared wit…”
BackgroundInfluentialSelective Delivery of Adiramycin to a Solid Tumor Using a Polymeric Micelle Carrier System
Yokoyama, M., Okano, T., Sakurai, Y., Fukushima, S., Okamoto, K., & Kataoka, K. (1999) · Journal of Drug Targeting · doi:10.3109/10611869909085500 · Cited by 213 · cited 2×
“[36], the study of polymeric micelle drug carrier systems started [37–39], and these carrier systems were recognized as one of the most potent drug carrier types in the 1990s [10,12,29,40–50] after the leading trials for the enhancement in in vivo pharmacological activities [39,51] and targeting [40,52] of drugs throu…”
BackgroundAliabadi, H. M., Mahmud, A., Sharifabadi, A. D., & Lavasanifar, A. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.02.015 · Cited by 211
Görner, T. (1999) · Journal of Controlled Release · doi:10.1016/s0168-3659(98)00121-7 · Cited by 209 · cited 8×
“The larger micelle size, the slower the drug release rate [86].”
BackgroundMethodInfluentialMicelles based on HPMA copolymers☆
Talelli, M., Rijcken, C. J. F., van Nostrum, C. F., Storm, G., & Hennink, W. E. (2010) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.11.029 · Cited by 208 · cited 1×
“Numerous types of biodegradable and synthetic block copolymers with different architectures (diblock, triblock, and grafted copolymers) and physical natures (charged and neutral) have been used to prepare diverse nanostructures, such as vesicles [7,79–81] and spherical and rodlike [82] micelles for drug delivery and t…”
MethodBiomimetic Doxorubicin Loaded Polymersomes from Hyaluronan-block-Poly(γ-benzyl glutamate) Copolymers
Upadhyay, K. K., Meins, J.-F. L., Misra, A., Voisin, P., Bouchaud, V., Ibarboure, E., Schatz, C., & Lecommandoux, S. (2009) · Biomacromolecules · doi:10.1021/bm9006419 · Cited by 207
Yokoyama, M., Satoh, A., Sakurai, Y., Okano, T., Matsumura, Y., Kakizoe, T., & Kataoka, K. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(98)00054-6 · Cited by 203 · cited 5×
“%) when dimethylformamide (DMF) was used in the dialysis method, and a tetrahydrofuran (THF)-based loading method gave 165 nm with 17.73% at the same conditions [47].”
BackgroundMethodInfluentialSolvents and Self-Organization of Polymers
(1996) · Springer eBooks · doi:10.1007/978-94-009-0333-3 · Cited by 201
Vittaz, M., Bazile, D., Spenlehauer, G., Verrecchia, T., Veillard, M., Puisieux, F., & Labarre, D. (1996) · Biomaterials · doi:10.1016/0142-9612(95)00322-3 · Cited by 193 · cited 1×
“Due to steric repulsion [119], the outer PEG shell of the micelle inhibits the surface adsorption of proteins and other biological components in the bloodstream so that there is no recognition by the RES (such as the liver, kidney, or spleen) [114], achieving higher circulation half-time in the body [101,120,121] and…”
BackgroundMagnetic Nanocomposite Micelles and Vesicles
Lecommandoux, S., Sandre, O., Chécot, F., Rodriguez‐Hernandez, J., & Perzynski, R. (2005) · Advanced Materials · doi:10.1002/adma.200400599 · Cited by 188
Jaeghere, F. D., Allémann, É., Leroux, J., Stevels, W. M., Feijén, J., Doelker, É., & Gurny, R. (1999) · Pharmaceutical Research · doi:10.1023/a:1018826103261 · Cited by 183 · cited 1×
“Drug release is highly influenced by where the drug molecules are located [49].”
BackgroundPhoto-responsive polymeric micelles
Huang, Y., Dong, R., Zhu, X., & Yan, D. (2014) · Soft Matter · doi:10.1039/c4sm00871e · Cited by 171
Weissig, V., Whiteman, K. R., & Torchilin, V. P. (1998) · Pharmaceutical Research · doi:10.1023/a:1011951016118 · Cited by 170 · cited 2×
“Due to steric repulsion [119], the outer PEG shell of the micelle inhibits the surface adsorption of proteins and other biological components in the bloodstream so that there is no recognition by the RES (such as the liver, kidney, or spleen) [114], achieving higher circulation half-time in the body [101,120,121] and…”
BackgroundBlock copolymer self-assembly in selective solvents: theory of solubilization in spherical micelles
Nagarajan, R., & Ganesh, K. (1989) · Macromolecules · doi:10.1021/ma00201a029 · Cited by 169 · cited 2×
“Ganesh and Nagarajan have developed the theory of solubilization based on the thermodynamic considerations of block copolymers, with the assumption that the micelles containing the solubilizate can be considered as a pseudo-phase in equilibrium with the solubilizate and the block copolymer molecules in a solution [17].”
BackgroundPolymeric micelles for drug delivery: solubilization and haemolytic activity of amphotericin B
Yu, B. G., Okano, T., Kataoka, K., & Kwon, G. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00245-9 · Cited by 165
Sant, V. P., Smith, D., & Leroux, J.-C. (2004) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.03.026 · Cited by 161 · cited 1×
“It is stated that the CMC decreases as the hydrophobic length increases [47,60,103,107].”
BackgroundYokoyama, M., Okano, T., Sakurai, Y., & Kataoka, K. (1994) · Journal of Controlled Release · doi:10.1016/0168-3659(94)90237-2 · Cited by 154 · cited 2×
“Furthermore, recent advances in synthetic chemistry have enabled chemical conjugation of drugs in the micelle core [13,15,19], as well as designing smart polymeric micelles with functions such as molecule-specific targeting [20–23] and stimuli-responsive drug release [3,24–27].”
BackgroundBenahmed, A., Ranger, M., & Leroux, J. (2001) · Pharmaceutical Research · doi:10.1023/a:1011054930439 · Cited by 153
Polymeric micelles with a pH-responsive structure as intracellular drug carriers
Wang, C., Wang, C., & Hsiue, G. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.07.017 · Cited by 150
Solubilization of Aromatic Solutes in Block Copolymers
Gadelle, F., Koros, W. J., & Schechter, R. S. (1995) · Macromolecules · doi:10.1021/ma00118a014 · Cited by 146 · cited 2×
“In general, an increase in the corona block will result in an increase in the CMC [106], followed by a decrease in the aggregation number (Nagg), and ultimately, smaller micelles [112] possessing water molecules at the corona [122] will be formed.”
BackgroundFabrication and characterisation of PCL and PCL/PLA scaffolds for tissue engineering
Patrício, T., Domingos, M. A. N., Gloria, A., D’Amora, U., Coelho, J. F. J., & Bártolo, P. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2012-0037 · Cited by 146 · cited 1×
“They are commonly used in many biomedical applications, such as scaffolds for tissue engineering [2] and anticancer drug nanocarriers [3].”
BackgroundYamamoto, Y., Yasugi, K., Harada, A., Nagasaki, Y., & Kataoka, K. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00147-5 · Cited by 140 · cited 3×
“1–1 μM [10,11]) compared with low-molecular-weight surfactants (0.”
BackgroundLocus of solubilization of benzene in surfactant micelles
Nagarajan, R., Chaiko, M. A., & Ruckenstein, E. (1984) · The Journal of Physical Chemistry · doi:10.1021/j150657a049 · Cited by 137
Block copolymer micelles as vehicles for hydrophobic drugs
Kwon, G. S., Naito, M., Kataoka, K., Yokoyama, M., Sakurai, Y., & Okano, T. (1994) · Colloids and Surfaces B Biointerfaces · doi:10.1016/0927-7765(94)80007-3 · Cited by 135
Biodegradable amphiphilic polymer–drug conjugate micelles
Hu, X., & Jing, X. (2009) · Expert Opinion on Drug Delivery · doi:10.1517/17425240903158917 · Cited by 134 · cited 1×
“5, whereas at ratio of 1, it was not possible to estimate the aggregate size and loading efficiency [74].”
BackgroundMontazeri Aliabadi, H., Brocks, D. R., & Lavasanifar, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.042 · Cited by 132 · cited 7×
“that film-formation method is not applicable to produce PEG-PCL based micelles [97].”
BackgroundMethodInfluentialStability and release performance of a series of pegylated copolymeric micelles
Lin, W.-J., Juang, L.-W., & Lin, C.-C. (2003) · Pharmaceutical Research · doi:10.1023/a:1023215320026 · Cited by 125 · cited 2×
“Examples of such approved polymers are the biocompatible hydrophilic PEG [144] and the biodegradable hydrophobic PLGA [145] and PDLLA [123].”
BackgroundA new hydrotropic block copolymer micelle system for aqueous solubilization of paclitaxel
Huh, K. M., Min, H. S., Lee, S. C., Lee, H. J., Kim, S., & Park, K. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.11.008 · Cited by 120 · cited 2×
“As the hydrophobicity of the core-forming blocks increases, the release rate decreases [64,65], and the thermodynamic stability of micelles”
BackgroundMicelle‐forming block copolymers: Pinocytosis by macrophages and interaction with model membranes
Pratten, M. K., Lloyd, J. B., Hörpel, G., & Ringsdorf, H. (1985) · Die Makromolekulare Chemie · doi:10.1002/macp.1985.021860406 · Cited by 114
Yokoyama, M., Sugiyama, T., Okano, T., Sakurai, Y., Naito, M., & Kataoka, K. (1993) · Pharmaceutical Research · doi:10.1023/a:1018921513605 · Cited by 110 · cited 2×
“However, polymeric micelles are assumed to have higher thermodynamic and kinetic stability (slower dissociation rate into unimers) than surfactant micelles due to the integrated molecular effect and the entangling of the core-forming blocks [15].”
BackgroundJeong, Y., Nah, J., Lee, H., Kim, S., & Cho, C. (1999) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(99)00202-1 · Cited by 109 · cited 5×
“For example, Cyclosporine A is expected to be efficiently encapsulated in PEG-PBLG micelles in much higher rates than in other polymeric micelles.”
BackgroundInfluentialYokoyama, M., Inoue, S., Kataoka, K., Yui, N., Okano, T., & Sakurai, Y. (1989) · Die Makromolekulare Chemie · doi:10.1002/macp.1989.021900904 · Cited by 103
Lele, B. S., & Leroux, J.-C. (2002) · Macromolecules · doi:10.1021/ma020433h · Cited by 101
Integrin-mediated signaling in osteoblasts on titanium implant materials
Krause, A., Cowles, E. A., & Gronowicz, G. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20001215)52:4<754::aid-jbm21>3.0.co;2-# · Cited by 98
Vangeyte, P., Gautier, S., & Jérôme, R. (2004) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2004.04.070 · Cited by 97 · cited 2×
“The physical loading efficiencies of the drug molecules in polymeric micelles were found to be dependent on the incorporation methods [72,97,140,141].”
BackgroundMethodMolavi, O., Ma, Z., Mahmud, A., Alshamsan, A., Samuel, J., Lai, R. L., Kwon, G. S., & Lavasanifar, A. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2007.06.032 · Cited by 97 · cited 2×
“So far, polymeric micelles intended for biomedical use have been prepared from a variety of amphiphilic block copolymers, including poly(ethylene glycol)-poly(γ-benzyl L-glutamate) PEG-PBLA [10,41,43,44,54,55,68,84–87], poly(ethylene glycol)-poly(D,L-lactic acid) PEG-PDLLA [11,45,72,86–90], poly(ethylene glycol)-poly(…”
BackgroundLee, H., Zeng, F., Dunne, M., & Allen, C. (2005) · Biomacromolecules · doi:10.1021/bm050451h · Cited by 95 · cited 9×
“It is obvious that at a constant hydrophilic block length, the CMC decreases as the hydrophobic/hydrophilic ratio (or hydrophobic length) increases [12,35,61,106].”
BackgroundMethodInfluentialRoby, A., Erdoğan, S., & Torchilin, V. P. (2005) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2005.09.010 · Cited by 92
Core-stabilized polymeric micelle as potential drug carrier: increased solubilization of taxol
Kim, J.-H., Emoto, K., Iijima, M., Nagasaki, Y., Aoyagi, T., Okano, T., Sakurai, Y., & Kataoka, K. (1999) · Polymers for Advanced Technologies · doi:10.1002/(sici)1099-1581(199911)10:11<647::aid-pat918>3.0.co;2-y · Cited by 91
Ahmad, M. Z., Alkahtani, S. A., Akhter, S., Ahmad, F. J., Ahmad, J., Akhtar, M. S., Mohsin, N., & Abdel-Wahab, B. A. (2016) · Journal of Drug Targeting · doi:10.3109/1061186x.2015.1055570 · Cited by 87
Shahin, M., & Lavasanifar, A. (2010) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.01.015 · Cited by 86
Self-Assembled Hydrophobic Honokiol Loaded MPEG-PCL Diblock Copolymer Micelles
Gou, M., Zheng, X., Men, K., Zhang, J., Wang, B., Lv, L., Wang, X., Zhao, Y., Luo, F., Chen, L., et al. (2009) · Pharmaceutical Research · doi:10.1007/s11095-009-9929-8 · Cited by 84 · cited 12×
“In comparison, the micelles of PDLLA, PBLA, PLGA, and PVL are likely to show much higher encapsulation efficiency for Paclitaxel and Docetaxel (commonly used anticancer drugs) than PCL-based micelles.”
BackgroundInfluentialFernandez, A.-M., Van derpoorten, K., Dasnois, L., Lebtahi, K., Dubois, V., Lobl, T. J., Gangwar, S., Oliyai, C., Lewis, E. R., Shochat, D., et al. (2001) · Journal of Medicinal Chemistry · doi:10.1021/jm0108754 · Cited by 78
The accumulation of dual pH and temperature responsive micelles in tumors
Chen, Y., Liao, L.-C., Lu, P.-L., Lo, C.-L., Tsai, H., Huang, C.-Y., Wei, K., Yen, T., & Hsiue, G.-H. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.02.059 · Cited by 77
Curcumin Delivery by Poly(Lactide)-Based Co-Polymeric Micelles: An In Vitro Anticancer Study
Kumari, P., Muddineti, O. S., Nadipalli, S. K., Myneni, S., Ghosh, B., & Biswas, S. (2015) · Pharmaceutical Research · doi:10.1007/s11095-015-1830-z · Cited by 76
Chang, Y., & Chu, I. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.09.021 · Cited by 68 · cited 7×
“In the next paragraphs, detailed descriptions for each parameter and its impact on the micellar stability, enhanced drug solubility (loading efficiency), and release rate [45,66,86,107] is discussed.”
BackgroundInfluentialLi, Q., Lai, K. L., Chan, P. S., Leung, S. C., Li, H. Y., Fang, Y., To, K. K. W., Choi, C. H. J., Gao, Q. Y., & Lee, T. W. Y. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2015.12.053 · Cited by 67
Smart hybrid magnetic self-assembled micelles and hollow capsules
Lecommandoux, S., Sandre, O., Chécot, F., & Perzynski, R. (2006) · Progress in Solid State Chemistry · doi:10.1016/j.progsolidstchem.2005.11.050 · Cited by 57
Polymer Drugs in the Clinical Stage
Maeda, H., Okano, T., Kataoka, K., & Kabanov, A. Y. (2003) · Advances in experimental medicine and biology · doi:10.1007/b105364 · Cited by 57 · cited 1×
“After demonstrating in detail the factors that govern micellar stability and size, loading efficiency, and drug release kinetics, we can recap these factors briefly as follow: (1) A relatively small number of polymers have been administered in the human body and clinically validated as safe for systemic administration…”
BackgroundLavasanifar, A., Samuel, J., & Kwon, G. S. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20001215)52:4<831::aid-jbm29>3.0.co;2-k · Cited by 55 · cited 1×
“Replacing the aromatic moiety of PBLA with aliphatic ones through polymer-analogous reactions resulted in a decreasing of the polarity of the micelle cores and then a higher incorporation of the drug [54].”
BackgroundChristine Allen, A. E. (2000) · Drug Delivery · doi:10.1080/10717540050120179 · Cited by 54 · cited 2×
“In different study, PEG-PCL micelles were found to completely release the loaded FK506 after six days [94].”
BackgroundMethodRational design of block copolymer micelles to control burst drug release at a nanoscale dimension
Abyaneh, H. S., Vakili, M. R., Zhang, F., Choi, P., & Lavasanifar, A. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.06.017 · Cited by 52 · cited 1×
“So far, polymeric micelles intended for biomedical use have been prepared from a variety of amphiphilic block copolymers, including poly(ethylene glycol)-poly(γ-benzyl L-glutamate) PEG-PBLA [10,41,43,44,54,55,68,84–87], poly(ethylene glycol)-poly(D,L-lactic acid) PEG-PDLLA [11,45,72,86–90], poly(ethylene glycol)-poly(…”
Role of Block Copolymer Nanoconstructs in Cancer Therapy
Upadhyay, K. K., Agrawal, H., Upadhyay, C., Schatz, C., Meins, J. L., Misra, A. R., & Lecommandoux, S. (2009) · Critical Reviews in Therapeutic Drug Carrier Systems · doi:10.1615/critrevtherdrugcarriersyst.v26.i2.20 · Cited by 52
Polycaprolactone-block-poly(ethylene oxide) Micelles: A Nanodelivery System for 17β-Estradiol
Lim Soo, P., Lovric, J., Davidson, P., Maysinger, D., & Eisenberg, A. (2005) · Molecular Pharmaceutics · doi:10.1021/mp050049h · Cited by 49 · cited 5×
“Finally, the larger core diameter could result in a higher crystallinity of the core in comparison to a smaller core diameter; the higher crystallinity would slow the release of the drug [98].”
BackgroundInfluentialEvaluation of polyanion-coated biodegradable polymeric micelles as drug delivery vehicles
Ohya, Y., Takeda, S., Shibata, Y., Ouchi, T., Kano, A., Iwata, T., Mochizuki, S., Taniwaki, Y., & Maruyama, A. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.11.008 · Cited by 49
Satoh, T., Higuchi, Y., Kawakami, S., Hashida, M., Kagechika, H., Shudo, K., & Yokoyama, M. (2009) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.02.024 · Cited by 47 · cited 1×
“4 at 37 ◦C [10,68,86,96,103] in the presence of lipase or proteins [106].”
BackgroundFerruti, P., Penco, M., D'Addato, P., Ranucci, E., & Deghenghi, R. (1995) · Biomaterials · doi:10.1016/0142-9612(95)96879-5 · Cited by 46 · cited 3×
“Moreover, it is speculated that PEG-PLGA micelles will exhibit higher LE than 92% due to χPLGA-PTX χPVL-PTX, as illustrated in Table 6.”
Tanaka, S., Ogura, A., Kaneko, T., Murata, Y., & Akashi, M. (2004) · Macromolecules · doi:10.1021/ma035472n · Cited by 44 · cited 1×
“5 Amorphous [35] PLGA 40–60 Amorphous [129] PBLA Amorphous [87] PBLG 50 [130]”
BackgroundRichter, A., Olbrich, C., Krause, M., & Kissel, T. (2010) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.01.032 · Cited by 38 · cited 10×
“Richter confirmed this trend recently and found that the Saglopine-loading efficiency in PEG-PCL micelles increased as the PCL/PEG ratio was increased [72].”
BackgroundMethodResultInfluentialMultifunctional nanomicellar systems for delivering anticancer drugs
Chen, Y., Lo, C.-L., & Hsiue, G. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34850 · Cited by 37 · cited 1×
“They are commonly used in many biomedical applications, such as scaffolds for tissue engineering [2] and anticancer drug nanocarriers [3].”
BackgroundSelf-assembled Micelle Loading Cabazitaxel for therapy of Lung Cancer
Zhuang, B. A., Du, L., Xu, H., Xu, X., Wang, C., Fan, Y., Cong, M., Yin, J., Li, H., & Guan, H. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.12.073 · Cited by 37
Synthesis and micellization of a pH-sensitive diblock copolymer for drug delivery
Koutroumanis, K. P., Holdich, R. G., & Georgiadou, S. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.06.071 · Cited by 30
Harada, Y., Yamamoto, T., Sakai, M., Saiki, T., Kawano, K., Maitani, Y., & Yokoyama, M. (2010) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.11.016 · Cited by 27 · cited 3×
“Recently, few studies have appeared on the prediction of the degree of compatibility (interaction) between the polymer and drug systems based on the comparison between the total solubility parameters for both the drug (δd) and core-forming blocks (δlp) [72,87,136].”
BackgroundMethodVisualization of PEO-PBLA-Pyrene Polymeric Micelles by Atomic Force Microscopy
Liaw, J., Aoyagi, T., Kataoka, K., Sakurai, Y., & Okano, T. (1998) · Pharmaceutical Research · doi:10.1023/a:1011908728838 · Cited by 26 · cited 8×
“This faster release of Doxorubicin in an acidic medium was also observed by Kataoka and coworkers [105] with the Doxorubicin-loaded PEG-PBLA micelles and is likely due to the re-protonation of the amino group of Doxorubicin and the faster degradation of the micelle core at a lower pH.”
InfluentialНиколаевич, К. А., Voskresenskaya, A. A., Goryachaya, A. V., Artyukhov, A. A., Shtilman, M. I., & Tsatsakis, A. M. (2010) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-010-4029-1 · Cited by 25
Tuning loading and release by modification of micelle core crystallinity and preparation
Glavas, L., Odelius, K., & Albertsson, A. (2015) · Polymers for Advanced Technologies · doi:10.1002/pat.3524 · Cited by 22 · cited 1×
“The glass transition temperature (Tg) of the hydrophobic segment has also been shown to have a direct effect on the CMC, micellar stability, and drug release rate [124].”
BackgroundFournier, C., Hecquet, B., Bouffard, P., Vert, M., Caty, A., Vilain, M. O., Vanseymortier, L., Merle, S., Krikorian, A., & Lefebvre, J.-L. (1991) · PubMed · Cited by 20
Feng, S., Huang, G., & Mu, L. (2000) · Annals of the Academy of Medicine Singapore · doi:10.47102/annals-acadmedsg.v29n5p633 · Cited by 19 · cited 7×
“In comparison, the micelles of PDLLA, PBLA, PLGA, and PVL are likely to show much higher encapsulation efficiency for Paclitaxel and Docetaxel (commonly used anticancer drugs) than PCL-based micelles.”
BackgroundInfluentialZhao, J., Pispas, S., & Zhang, G. (2009) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900161 · Cited by 18 · cited 2×
“The physical loading efficiencies of the drug molecules in polymeric micelles were found to be dependent on the incorporation methods [72,97,140,141].”
MethodLatere, D. J. P., Rouxhet, L., Brewster, M. E., Véronique Préat, A., & Ariën, A. (2008) · PubMed · doi:10.1691/ph.2008.7324 · Cited by 10
Micelle-like macromolecular systems for controlled release of daunomycin
Gorshkova, M. Y., & Stotskaya, L. L. (1998) · Polymers for Advanced Technologies · doi:10.1002/(sici)1099-1581(199806)9:6<322::aid-pat783>3.0.co;2-n · Cited by 8
Micelle-like macromolecular systems for controlled release of daunomycin
Gorshkova, M. Y., & Stotskaya, L. L. (1998) · Polymers for Advanced Technologies · Cited by 8
Research works printed but not linked: 3
- Israelachvili, J.N. (2011). Intermolecular and Surface Forces, Elsevier Inc.
- Alexandridis, P., and Lindman, B. (2000). Block Copolymers: Self-Assembly and Applications, Elsevier Science B.V.
- Hoy, 1970, New values of the solubility parameters from vapor pressure data, J. Paint Technol., 42, 115
Cited by
Smart nanoparticles for cancer therapy
Sun, L., Liu, H., Ye, Y., Lei, Y., Islam, R., Tan, S., Tong, R., Miao, Y.-B., & Cai, L. (2023) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-023-01642-x · Cited by 1,073
“37 The use of long-circulating polymer micelles to target Fig.”
BackgroundHwang, D., Ramsey, J. D., & Kabanov, A. V. (2020) · Advanced drug delivery reviews · doi:10.1016/j.addr.2020.09.009 · Cited by 699
“The selection of applicable manufacturing processes may impact characteristics of the final polymeric micelle formulation such as drug loading, size distribution, and stability in aqueous media, which are critical factors for translation [262].”
BackgroundAbbasi, R., Shineh, G., Mobaraki, M., Doughty, S., & Tayebi, L. (2023) · Journal of Nanoparticle Research · doi:10.1007/s11051-023-05690-w · Cited by 623
“They have a corona-core structure comprising a central hydrophobic core plus a hydrophilic corona in an aqueous medium [81].”
BackgroundRecent Advances in Nanocarrier-Assisted Therapeutics Delivery Systems
Su, S., & M. Kang, P. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12090837 · Cited by 259
Micellar Drug Delivery Systems Based on Natural Biopolymers
Atanase, L. I. (2021) · Polymers · doi:10.3390/polym13030477 · Cited by 239
Metadata
- Authors
- Hussein, Y. H. A., & Youssry, M.
- Affiliations
- Qatar University (QA)
- Corresponding author
- Hussein, Yasser H. A.
- Youssry, Mohamed
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2018-04-27
- Volume
- 11
- Issue
- 5
- Pages
- 688
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC5978065
- OpenAlex
- W2800124727
- Cited by
- 196
- References
- 143
- Citations by year
- 2026: 18 · 2025: 23 · 2024: 19 · 2023: 30 · 2022: 27 · 2021: 36 · 2020: 33 · 2019: 7 · 2018: 3
- FWCI
- 1.31
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Qatar University QSpace (Qatar University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Nanoparticle-Based Drug Delivery
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Pharmaceutical Science › Advanced Drug Delivery Systems
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Keywords
- polymeric micelles, hydrophobic drug encapsulation, drug-polymer compatibility, controlled drug release, drug release kinetics, solvent effects, polymeric nanocarriers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.