The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
Open accessAbstract
The advent of digital concrete fabrication calls for advancing our understanding of the interaction of 3D printing with material rheology and print parameters, in addition to developing new measurement and control techniques. Thixotropy is the main challenge associated with printable material, which offers high yield strength and low viscosity. The higher the thixotropy, the better the shape stability and the higher buildability. However, exceeding a minimum value of thixotropy can cause high extrusion pressure and poor interface bond strength if the printing parameters are not optimized to the part design. This paper aims to investigate the effects of both material and process parameters on the buildability and inter-layer adhesion properties of 3D printed cementitious materials, produced with different thixotropy and print head standoff distances. Nano particles are used to increase the thixotropy and, in this context, a lower standoff distance is found to be useful for improving the bond strength. The low viscosity “control” sample is unaffected by the variation in standoff distances, which is attributed to its flowability and low yield stress characteristics that lead to strong interfacial bonding. This is supported by our microscopic observations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
A Practical Guide to Microstructural Analysis of Cementitious Materials
(2018) · CRC Press eBooks · doi:10.1201/b19074 · Cited by 2,110
R factors in Rietveld analysis: How good is good enough?
Toby, B. H. (2006) · Powder Diffraction · doi:10.1154/1.2179804 · Cited by 1,505
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
3D printing trends in building and construction industry: a review
Tay, Y. W. D., Panda, B., Paul, S. C., Noor Mohamed, N. A., Tan, M. J., & Leong, K. F. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1326724 · Cited by 868
Self-citationEarly age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.001 · Cited by 846
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.02.017 · Cited by 836
Cited by
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107290 · Cited by 285
Self-citationAn investigation into the porosity of extrusion-based 3D printed concrete
Kruger, J., du Plessis, A., & van Zijl, G. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101740 · Cited by 263
3-D printing of concrete: Beyond horizons
Khan, M. S., Sanchez, F., & Zhou, H. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106070 · Cited by 260
Al Rashid, A., Khan, S. A., G. Al-Ghamdi, S., & Koç, M. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103268 · Cited by 257
A process classification framework for defining and describing Digital Fabrication with Concrete
Buswell, R. A., da Silva, W. R. L., Bos, F. P., Schipper, H. R., Lowke, D., Hack, N., Kloft, H., Mechtcherine, V., Wangler, T., & Roussel, N. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106068 · Cited by 254
Metadata
- Authors
- Panda, B., Noor Mohamed, N. A., Paul, S. C., Bhagath Singh, G., Tan, M. J., & Šavija, B.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2019-07-04
- Volume
- 12
- Issue
- 13
- Pages
- 2149
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2955584588
- Cited by
- 301
- References
- 35
- FWCI
- 19.39
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.