The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
Open accessAbstract
The advent of digital concrete fabrication calls for advancing our understanding of the interaction of 3D printing with material rheology and print parameters, in addition to developing new measurement and control techniques. Thixotropy is the main challenge associated with printable material, which offers high yield strength and low viscosity. The higher the thixotropy, the better the shape stability and the higher buildability. However, exceeding a minimum value of thixotropy can cause high extrusion pressure and poor interface bond strength if the printing parameters are not optimized to the part design. This paper aims to investigate the effects of both material and process parameters on the buildability and inter-layer adhesion properties of 3D printed cementitious materials, produced with different thixotropy and print head standoff distances. Nano particles are used to increase the thixotropy and, in this context, a lower standoff distance is found to be useful for improving the bond strength. The low viscosity “control” sample is unaffected by the variation in standoff distances, which is attributed to its flowability and low yield stress characteristics that lead to strong interfacial bonding. This is supported by our microscopic observations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
A Practical Guide to Microstructural Analysis of Cementitious Materials
(2018) · CRC Press eBooks · doi:10.1201/b19074 · Cited by 2,110
R factors in Rietveld analysis: How good is good enough?
Toby, B. H. (2006) · Powder Diffraction · doi:10.1154/1.2179804 · Cited by 1,505
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
3D printing trends in building and construction industry: a review
Tay, Y. W. D., Panda, B., Paul, S. C., Noor Mohamed, N. A., Tan, M. J., & Leong, K. F. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1326724 · Cited by 868
Self-citationEarly age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.001 · Cited by 846
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.02.017 · Cited by 836
Kazemian, A., Yuan, X., Cochran, E., & Khoshnevis, B. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.015 · Cited by 774
Effect of surface moisture on inter-layer strength of 3D printed concrete
Sanjayan, J., Nematollahi, B., Xia, M., & Marchment, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.232 · Cited by 713
Digital Concrete: Opportunities and Challenges
Wangler, T., Lloret, E., Reiter, L., Hack, N., Gramazio, F., Kohler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., et al. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.16 · Cited by 636
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Paul, S. C., Tay, Y. W. D., Panda, B., & Tan, M. J. (2018) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2017.02.008 · Cited by 633
Self-citationMeasurement of tensile bond strength of 3D printed geopolymer mortar
Panda, B., Paul, S. C., Mohamed, N. A. N., Tay, Y. W. D., & Tan, M. J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.051 · Cited by 592
Self-citationPanda, B., & Tan, M. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.031 · Cited by 520
Self-citationMarchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.014 · Cited by 507
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.10.002 · Cited by 482
Self-citationPaul, S. C., van Zijl, G. P. A. G., Tan, M. J., & Gibson, I. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2016-0154 · Cited by 418
Self-citationImproving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Panda, B., Ruan, S., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.11.109 · Cited by 405
Self-citationEffects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete
Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.019 · Cited by 353
Panda, B., Lim, J. H., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.02.040 · Cited by 312
Self-citationEffects of interface roughness and interface adhesion on new-to-old concrete bonding
He, Y., Zhang, X., Hooton, R. D., & Zhang, X. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.05.049 · Cited by 295
Classification of building systems for concrete 3D printing
Duballet, R., Baverel, O., & Dirrenberger, J. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.018 · Cited by 238
An approach to develop printable strain hardening cementitious composites
Chaves Figueiredo, S., Romero Rodríguez, C., Ahmed, Z. Y., Bos, D. H., Xu, Y., Salet, T. M., Çopuroğlu, O., Schlangen, E., & Bos, F. P. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107651 · Cited by 211
Chen, Y., Li, Z., Figueiredo, S. C., Çopuroğlu, O., Veer, F. A., & Schlangen, E. (2019) · Applied Sciences · doi:10.3390/app9091809 · Cited by 160
Liu, D., Šavija, B., Smith, G. E., Flewitt, P. E. J., Lowe, T., & Schlangen, E. (2017) · International Journal of Fracture · doi:10.1007/s10704-017-0181-7 · Cited by 135
Self-citationConstruction by contour crafting using sulfur concrete with planetary applications
Khoshnevis, B., Yuan, X., Zahiri, B., Zhang, J., & Xia, B. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0165 · Cited by 115
Dakhane, A., Tweedley, S. E., Kailas, S., Marzke, R. F., & Neithalath, N. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.021 · Cited by 86
Investigation of concrete mixtures for additive construction
Rushing, T. S., Al‐Chaar, G. K., Eick, B., Burroughs, J. F., Shannon, J. D., Barna, L. A., & Case, M. P. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2015-0124 · Cited by 70
Micromechanical Study of the Interface Properties in Concrete Repair Systems
Luković, M., Šavija, B., Dong, H., Schlangen, E., & Ye, G. (2014) · Journal of Advanced Concrete Technology · doi:10.3151/jact.12.320 · Cited by 62
Self-citationQuantitative XRD Analysis of Binary Blends of Siliceous Fly Ash and Hydrated Cement
Singh, G. V. P. B., & Subramaniam, K. V. L. (2016) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001554 · Cited by 55
Investigation of Concrete Mixtures for Additive Construction
Rushing, T. S., Stynoski, P. B., Barna, L. A., Al‐Chaar, G. K., Burroughs, J. F., Shannon, J. D., Kreiger, M. A., & Case, M. P. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00007-5 · Cited by 54
A Feasibility Study on HPMC-Improved Sulphoaluminate Cement for 3D Printing
Ding, Z., Wang, X., Sanjayan, J., Zou, P. X. W., & Ding, Z. (2018) · Materials · doi:10.3390/ma11122415 · Cited by 45
Singh, G. V. P. B., & Subramaniam, K. V. L. (2016) · Journal of the American Ceramic Society · doi:10.1111/jace.14486 · Cited by 27
Cited by
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107290 · Cited by 285
Self-citationAn investigation into the porosity of extrusion-based 3D printed concrete
Kruger, J., du Plessis, A., & van Zijl, G. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101740 · Cited by 263
3-D printing of concrete: Beyond horizons
Khan, M. S., Sanchez, F., & Zhou, H. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106070 · Cited by 260
Al Rashid, A., Khan, S. A., G. Al-Ghamdi, S., & Koç, M. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103268 · Cited by 257
Metadata
- Authors
- Panda, B., Noor Mohamed, N. A., Paul, S. C., Bhagath Singh, G., Tan, M. J., & Šavija, B.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2019-07-04
- Volume
- 12
- Issue
- 13
- Pages
- 2149
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2955584588
- Cited by
- 301
- References
- 35
- FWCI
- 19.39
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.