The DOI matches its Crossref record; 128 of the 128 references it cites were found in a registry or an index.
Phase Change Materials Application in Battery Thermal Management System: A Review
Open accessAbstract
The purpose of a battery thermal management system (BTMS) is to maintain the battery safety and efficient use as well as ensure the battery temperature is within the safe operating range. The traditional air-cooling-based BTMS not only needs extra power, but it could also not meet the demand of new lithium-ion battery (LIB) packs with high energy density, while liquid cooling BTMS requires complex devices to ensure the effect. Therefore, phase change materials (PCMs)-based BTMS is becoming the trend. By using PCMs to absorb heat, the temperature of a battery pack could be kept within the normal operating range for a long time without using any external power. PCMs could greatly improve the heat dissipation efficiency of BTMS by combining with fillers such as expanded graphite (EG) and metal foam for their high thermal conductivity or coordinating with fins. In addition, PCMs could also be applied in construction materials, solar thermal recovery, textiles and other fields. Herein, a comprehensive review of the PCMs applied in thermal storage devices, especially in BTMS, is provided. In this work, the literature concerning current issues have been reviewed and summarized, while the key challenges of PCM application have been pointed out. This review may bring new insights to the PCM application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
A review on phase change energy storage: materials and applications
Farid, M. M., Khudhair, A. M., Razack, S. A. K., & Al-Hallaj, S. (2004) · Energy Conversion and Management · doi:10.1016/j.enconman.2003.09.015 · Cited by 3,097
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Solar energy for future world: A review
Kannan, N., & Vakeesan, D. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.022 · Cited by 2,104
Research opportunities to advance solar energy utilization
Lewis, N. S. (2016) · Science · doi:10.1126/science.aad1920 · Cited by 2,075
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
Main aging mechanisms in Li ion batteries
Broussely, M., Biensan, P., Bonhomme, F., Blanchard, P., Herreyre, S., Nechev, K., & Staniewicz, R. J. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.172 · Cited by 1,159
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Fan, L., & Khodadadi, J. M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.007 · Cited by 1,003
Thermal conductivity enhancement on phase change materials for thermal energy storage: A review
Wu, S., Yan, T., Kuai, Z., & Pan, W. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.10.010 · Cited by 962
Lin, Y., Jia, Y., Alva, G., & Fang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.002 · Cited by 910
Jamekhorshid, A., Sadrameli, S. M., & Farid, M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.033 · Cited by 899
Khan, Z., Khan, Z., & Ghafoor, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.045 · Cited by 765
Mohamed, S. A., Al-Sulaiman, F. A., Ibrahim, N. I., Zahir, M. H., Al-Ahmed, A., Saidur, R., Yılbaş, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.012 · Cited by 759
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Fuel cells for portable applications
Dyer, C. K. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01069-2 · Cited by 710
Qureshi, Z. A., Ali, H. M., & Khushnood, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.049 · Cited by 697
Sabbah, R., Kizilel, R., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.082 · Cited by 680
Preparation and thermal characterization of paraffin/metal foam composite phase change material
Xiao, X., Zhang, P., & Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.050 · Cited by 627
Giro-Paloma, J., Martínez, M., Cabeza, L. F., & Fernández, A. I. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.040 · Cited by 597
A General Discussion of Li Ion Battery Safety
(2012) · Electrochemical Society Interface · doi:10.1149/2.f03122if · Cited by 592
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Graphene-enhanced hybrid phase change materials for thermal management of Li-ion batteries
Goli, P., Legedza, S., Dhar, A., Salgado, R., Renteria, J., & Balandin, A. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.135 · Cited by 547
Zhang, H., Wang, X., & Wu, D. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.11.036 · Cited by 534
Yu, S., Wang, X., & Wu, D. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.10.029 · Cited by 531
Shim, J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00363-4 · Cited by 519
An alternative cooling system to enhance the safety of Li-ion battery packs
Kizilel, R., Sabbah, R., Selman, J. R., & Al-Hallaj, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.074 · Cited by 513
Zhang, P., Meng, Z. N., Zhu, H., Wang, Y. L., & Peng, S. P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2015.10.075 · Cited by 497
Milián, Y. E., Gutiérrez, A., Grágeda, M., & Ushak, S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.159 · Cited by 491 · cited 1×
“Eutectic PCMs are usually prepared by combining two or more substances with low melting temperature including organics, inorganics, or both inorganic and organic compounds, and they are crystal mixtures of several soluble components, which could be characterized by simultaneous melting and solidification, and the melt…”
BackgroundHigh-temperature storage and cycling of C-LiFePO4/graphite Li-ion cells
Amine, K., Liu, J., & Belharouak, I. (2005) · Electrochemistry Communications · doi:10.1016/j.elecom.2005.04.018 · Cited by 480
Eanest Jebasingh, B., & Valan Arasu, A. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.07.031 · Cited by 477
Capacity fade of Sony 18650 cells cycled at elevated temperatures
Ramadass, P., Haran, B., White, R., & Popov, B. N. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00474-3 · Cited by 450
Kamkari, B., & Shokouhmand, H. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.07.056 · Cited by 437
Wang, Z., Zhang, Z., Jia, L., & Yang, L. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.009 · Cited by 425
Abdulateef, A. M., Mat, S., Abdulateef, J., Sopian, K., & Al-Abidi, A. A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.07.009 · Cited by 425
Khodadadi, J. M., Fan, L., & Babaei, H. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.031 · Cited by 422
Cycling degradation of an automotive LiFePO4 lithium-ion battery
Zhang, Y., Wang, C.-Y., & Tang, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.08.070 · Cited by 412
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Liu, L., Su, D., Tang, Y., & Fang, G. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.057 · Cited by 410
Khateeb, S. A., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.070 · Cited by 405
Xiao, X., Zhang, P., & Li, M. (2014) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.03.006 · Cited by 391
Thermal management of a Li-ion battery using carbon fiber-PCM composites
Babapoor, A., Azizi, M., & Karimi, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.068 · Cited by 380
Amin, M., Putra, N., Kosasih, E. A., Prawiro, E., Luanto, R. A., & Mahlia, T. M. I. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.085 · Cited by 370
Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles
Javani, N., Dincer, I., Naterer, G. F., & Yilbas, B. S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.076 · Cited by 370
Liang, J., Gan, Y., & Li, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.063 · Cited by 367
Aging Mechanisms of LiFePO[sub 4] Batteries Deduced by Electrochemical and Structural Analyses
Liu, P., Wang, J., Hicks-Garner, J., Sherman, E., Soukiazian, S., Verbrugge, M., Tataria, H., Musser, J., & Finamore, P. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3294790 · Cited by 358
Self-citationFaraj, K., Khaled, M., Faraj, J., Hachem, F., & Castelain, C. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.101913 · Cited by 354
Thermophysical properties and applications of nano-enhanced PCMs: An update review
Yang, L., Huang, J.-N., & Zhou, F. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112876 · Cited by 343
Ling, Z., Chen, J., Xu, T., Fang, X., Gao, X., & Zhang, Z. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.11.040 · Cited by 337
Heat transfer in phase change materials for thermal management of electric vehicle battery modules
Duan, X., & Naterer, G. F. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.07.044 · Cited by 335
Al-Hallaj, S., & Selman, J. R. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00196-9 · Cited by 325
Effects of nanoparticle-enhanced phase change material (NPCM) on solar still productivity
Dsilva Winfred Rufuss, D., Suganthi, L., Iniyan, S., & Davies, P. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.04.201 · Cited by 316
Review of the application of phase change material for heating and domestic hot water systems
Sharif, M. K. A., Al-Abidi, A. A., Mat, S., Sopian, K., Ruslan, M. H., Sulaiman, M. Y., & Rosli, M. A. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.09.034 · Cited by 312
Non-uniform heat transfer suppression to enhance PCM melting by angled fins
Ji, C., Qin, Z., Low, Z., Dubey, S., Choo, F. H., & Duan, F. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.030 · Cited by 312
Effects of overdischarge on performance and thermal stability of a Li-ion cell
Maleki, H., & Howard, J. N. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.043 · Cited by 302
Kizilel, R., Lateef, A., Sabbah, R., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.04.050 · Cited by 301
Mahdi, J. M., Lohrasbi, S., Ganji, D. D., & Nsofor, E. C. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.11.038 · Cited by 294
Improving thermal conductivity phase change materials—A study of paraffin nanomagnetite composites
Şahan, N., Fois, M., & Paksoy, H. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.01.027 · Cited by 292
Thermal management of the lithium-ion battery by the composite PCM-Fin structures
Sun, Z., Fan, R., Yan, F., Zhou, T., & Zheng, N. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118739 · Cited by 288
Can Li-Ion batteries be the panacea for automotive applications?
Opitz, A., Badami, P., Shen, L., Vignarooban, K., & Kannan, A. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.019 · Cited by 284
Nano-PCMs for enhanced energy storage and passive cooling applications
Colla, L., Fedele, L., Mancin, S., Danza, L., & Manca, O. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.03.161 · Cited by 283
Jiang, X., Luo, R., Peng, F., Fang, Y., Akiyama, T., & Wang, S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.09.028 · Cited by 279
Huang, X., Alva, G., Jia, Y., & Fang, G. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.048 · Cited by 278
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Experimental and numerical study on melting of phase change materials in metal foams at pore scale
Chen, Z., Gao, D., & Shi, J. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.01.003 · Cited by 269
Wu, W., Yang, X., Zhang, G., Ke, X., Wang, Z., Situ, W., Li, X., & Zhang, J. (2016) · Energy · doi:10.1016/j.energy.2016.07.119 · Cited by 266
Mehrali, M., Latibari, S. T., Mehrali, M., Indra Mahlia, T. M., Cornelis Metselaar, H. S., Naghavi, M. S., Sadeghinezhad, E., & Akhiani, A. R. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.08.035 · Cited by 255
Simulation of passive thermal management system for lithium-ion battery packs
Mills, A., & Al-Hallaj, S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.025 · Cited by 254
Wang, T., Wang, S., Luo, R., Zhu, C., Akiyama, T., & Zhang, Z. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.03.037 · Cited by 252
Harish, S., Orejon, D., Takata, Y., & Kohno, M. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.056 · Cited by 249
Ali, H. M., Ashraf, M. J., Giovannelli, A., Irfan, M., Irshad, T. B., Hamid, H. M., Hassan, F., & Arshad, A. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.02.044 · Cited by 248
Heat pipe with nano enhanced-PCM for electronic cooling application
Krishna, J., Kishore, P. S., & Solomon, A. B. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.10.014 · Cited by 247
Thermal analysis of a cylindrical lithium-ion battery
Zhang, X. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2010.10.054 · Cited by 245
Failure mechanism of Li-ion battery at overcharge conditions
Belov, D., & Yang, M.-H. (2008) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-007-0449-3 · Cited by 243
Tao, Y. B., Lin, C. H., & He, Y. L. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.03.051 · Cited by 242
Weng, J., Ouyang, D., Yang, X., Chen, M., Zhang, G., & Wang, J. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112071 · Cited by 234
Self-citationXu, B., & Li, Z. (2014) · Energy · doi:10.1016/j.energy.2014.05.049 · Cited by 233
Ali, H. M., & Arshad, A. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.05.004 · Cited by 224
Studies on optimum fins number in PCM-based heat sinks
Kalbasi, R., Afrand, M., Alsarraf, J., & Tran, M.-D. (2019) · Energy · doi:10.1016/j.energy.2019.01.070 · Cited by 221
Thermal conductivity enhancement of erythritol as PCM by using graphite and nickel particles
Oya, T., Nomura, T., Tsubota, M., Okinaka, N., & Akiyama, T. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.05.033 · Cited by 215
Meng, Z. N., & Zhang, P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.12.163 · Cited by 214
Zhao, C., Opolot, M., Liu, M., Bruno, F., Mancin, S., & Hooman, K. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119348 · Cited by 213
Fang, X., Fan, L.-W., Ding, Q., Yao, X.-L., Wu, Y.-Y., Hou, J.-F., Wang, X., Yu, Z.-T., Cheng, G.-H., & Hu, Y.-C. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.01.016 · Cited by 209
Optimization of the internal fin in a phase-change-material module for battery thermal management
Weng, J., Ouyang, D., Yang, X., Chen, M., Zhang, G., & Wang, J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114698 · Cited by 205
Self-citationCui, W., Yuan, Y., Sun, L., Cao, X., & Yang, X. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.08.001 · Cited by 203
Alshaer, W. G., Nada, S. A., Rady, M. A., Le Bot, C., & Palomo Del Barrio, E. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.045 · Cited by 196
Rehman, T.-U., & Ali, H. M. (2018) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2018.08.003 · Cited by 193
Recent developments of lightweight, high performance heat pipes
Yang, X., Yan, Y., & Mullen, D. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.09.006 · Cited by 186
Review of stability and thermal conductivity enhancements for salt hydrates
Kumar, N., Hirschey, J., LaClair, T. J., Gluesenkamp, K. R., & Graham, S. L. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100794 · Cited by 185
Tian, B., Yang, W., Luo, L., Wang, J., Zhang, K., Fan, J., Wu, J., & Xing, T. (2016) · Solar Energy · doi:10.1016/j.solener.2016.01.011 · Cited by 184
Self-citationWeng, J., He, Y., Ouyang, D., Yang, X., Zhang, G., & Wang, J. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112106 · Cited by 181
Self-citationMohamed, N. H., Soliman, F. S., El Maghraby, H., & Moustfa, Y. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.009 · Cited by 177
High thermal conductivity phase change composite with percolating carbon fiber network
Nomura, T., Tabuchi, K., Zhu, C., Sheng, N., Wang, S., & Akiyama, T. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.05.042 · Cited by 175
Influence of fin size and distribution on solid-liquid phase change in a rectangular enclosure
Biwole, P. H., Groulx, D., Souayfane, F., & Chiu, T. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.10.038 · Cited by 171
Mehrali, M., Latibari, S. T., Mehrali, M., Mahlia, T. M. I., Sadeghinezhad, E., & Metselaar, H. S. C. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.100 · Cited by 165
Babapoor, A., & Karimi, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.083 · Cited by 161
Thermal conductivity enhancement of epoxy adhesive using graphene sheets as additives
Fu, Y.-X., He, Z.-X., Mo, D.-C., & Lu, S.-S. (2014) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.07.011 · Cited by 157
Preparation and thermal properties of short carbon fibers/erythritol phase change materials
Zhang, Q., Luo, Z., Guo, Q., & Wu, G. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.023 · Cited by 157
Zhang, X., Liu, C., & Rao, Z. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.076 · Cited by 153
Self-citationLiu, X., & Rao, Z. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.11.010 · Cited by 147
Research Progress of Phase Change Materials (PCMs) Embedded with Metal Foam (a Review)
Chen, J., Yang, D., Jiang, J., Ma, A., & Song, D. (2014) · Procedia Materials Science · doi:10.1016/j.mspro.2014.07.579 · Cited by 145
Xing, M., Yu, J., & Wang, R. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.05.005 · Cited by 141
Huang, X. Y., Alva, G., Liu, L., & Fang, G. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.074 · Cited by 139
Li, M., Chen, M., & Wu, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.04.029 · Cited by 135
Melting and solidification of PCM in a tube-in-shell unit: Effect of fin edge lengths' ratio
Yagci, O. K., Avcı, M., & Aydın, O. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100802 · Cited by 134
Zhang, Y., Chen, R., Zhao, M., Luo, J., Feng, W., Fan, W., Tan, Y., Cao, W., Shu, C., & Yu, C. (2020) · Fuel · doi:10.1016/j.fuel.2020.117313 · Cited by 129
Li, J. F., Lu, W., Zeng, Y., & Luo, Z. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.05.018 · Cited by 128
Ghossein, R. M. A., Hossain, M. S., & Khodadadi, J. M. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.11.059 · Cited by 127
Alimohammadi, M., Aghli, Y., Alavi, E. S., Sardarabadi, M., & Passandideh‐Fard, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.09.028 · Cited by 124
Thermal Evaluation of Toyota Prius Battery Pack
Zolot, M., Pesaran, A. A., & Mihalic, M. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-1962 · Cited by 123
Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage
Ye, F., Ge, Z., Ding, Y., & Yang, J. (2013) · Particuology · doi:10.1016/j.partic.2013.05.001 · Cited by 122
Gunasekara, S. N., Martin, V., & Chiu, J. N. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.108 · Cited by 117
Zhang, Y., Jiao, F., Huang, Q., Cao, W., Shi, L., Zhao, M., Yu, C., Nie, B., & Cao, X. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113907 · Cited by 117
Self-citationInnovative method of metal coating of microcapsules containing phase change materials
Al‐Shannaq, R., Kurdi, J., Al‐Muhtaseb, S. A., & Farid, M. M. (2016) · Solar Energy · doi:10.1016/j.solener.2016.01.043 · Cited by 116
Heat transfer and thermal management of electric vehicle batteries with phase change materials
Ramandi, M. Y., Dinçer, İ., & Naterer, G. F. (2011) · Heat and Mass Transfer · doi:10.1007/s00231-011-0766-z · Cited by 114
Li, M., Chen, M., Wu, Z., & Liu, J. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.04.002 · Cited by 110
Acır, A., & Canlı, M. E. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.09.013 · Cited by 110
Combined effects of inclination angle and fin number on thermal performance of a PCM-based heat sink
Yazıcı, M. Y., Avcı, M., & Aydın, O. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113956 · Cited by 106
Stearic acid modified montmorillonite as emerging microcapsules for thermal energy storage
Peng, K., Fu, L., Li, X., Ouyang, J., & Yang, H. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.01.003 · Cited by 105
Study of magnesium chloride hexahydrate as heat storage material
Pilař, R., Svoboda, L., Honcová, P., & Oravová, L. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.07.021 · Cited by 103
Worldwide trends on encapsulation of phase change materials: A bibliometric analysis (1990–2015)
Yataganbaba, A., Özkahraman, B., & Kurtbaş, İ. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.10.107 · Cited by 102
Elbahjaoui, R., & El Qarnia, H. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.08.003 · Cited by 95
Yang, Y., Kuang, J., Wang, H., Song, G., Liu, Y., & Tang, G. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.02.020 · Cited by 89
Zhang, Y., Wang, X., & Wu, D. (2016) · Energy · doi:10.1016/j.energy.2015.12.114 · Cited by 85
Experimental study on effective thermal conductivity of microcapsules based phase change composites
Wang, T., Wang, S., & Wu, W. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.02.068 · Cited by 72
Warzoha, R. J., & Fleischer, A. S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.121 · Cited by 70
Fabrication and analysis of small-scale thermal energy storage with conductivity enhancement
Thapa, S., Chukwu, S., Khaliq, A., & Weiss, L. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.12.019 · Cited by 66
Ramakrishnan, S., Wang, X., Sanjayan, J., & Wilson, J. L. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.964 · Cited by 58
Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage
Feng, Ye, Zhiwei, ge, G., Yulong, Ding, D., Jun, J., & Yang (2014) · 中国颗粒学报:英文版 · Cited by 42
EXPERIMENTAL STUDY ON PALMITIC ACID COMPOSITES CONTAINING CARBON NANOTUBES BY ACID TREATMENT
Wang, J. (2010) · Journal of Engineering Thermophysics · Cited by 4
Self-citation
Cited by
Kumar, R. R., Bharatiraja, C., Udhayakumar, K., Devakirubakaran, S., Sekar, K. S., & Mihet-Popa, L. (2023) · IEEE Access · doi:10.1109/access.2023.3318121 · Cited by 471
Zhao, G., Wang, X., Negnevitsky, M., & Li, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119626 · Cited by 395
Jiang, X., Chen, Y., Meng, X., Cao, W., Liu, C., Huang, Q., Naik, N., Murugadoss, V., Huang, M., & Guo, Z. (2022) · Carbon · doi:10.1016/j.carbon.2022.02.011 · Cited by 308
Self-citationA state-of-the art review on advancing battery thermal management systems for fast-charging
Kumar Thakur, A., Sathyamurthy, R., Velraj, R., Saidur, R., Pandey, A. K., Ma, Z., Singh, P., Hazra, S. K., Wafa Sharshir, S., Prabakaran, R., et al. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120303 · Cited by 263
Metadata
- Authors
- Liu, C., Xu, D., Weng, J., Zhou, S., Li, W., Wan, Y., Jiang, S., Zhou, D., Wang, J., & Huang, Q.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2020-10-16
- Volume
- 13
- Issue
- 20
- Pages
- 4622
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W3093470760
- Cited by
- 282
- References
- 128
- FWCI
- 14.32
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.