The DOI matches its Crossref record; 110 of the 110 references it cites were found in a registry or an index.
Environmental Impact of Food Packaging Materials: A Review of Contemporary Development from Conventional Plastics to Polylactic Acid Based Materials
Open accessAbstract
Plastics have remained the material of choice, and after serving their intended purpose, a large proportion ends up in the environment where they persist for centuries. The packaging industry is the largest and growing consumer of synthetic plastics derived from fossil fuels. Food packaging plastics account for the bulk of plastic waste that are polluting the environment. Additionally, given the fact that petroleum reserves are finite and facing depletion, there is a need for the development of alternative materials that can serve the same purpose as conventional plastics. This paper reviews the function of packaging materials and highlights the future potential of the adoption of green materials. Biopolymers have emerged as promising green materials although they still have very low market uptake. Polylactic acid (PLA) has emerged as the most favoured bioplastic. However, it is limited by its high cost and some performance drawbacks. Blending with agricultural waste and natural fillers can result in green composites at low cost, low greenhouse gas emissions, and with improved performance for food packaging applications. The continent of Africa is proposed as a rich source of fibres and fillers that can be sustainably exploited to fabricate green composites in a bid to achieve a circular economy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Degradation rates of plastics in the environment
Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06635 · Cited by 3,463 · cited 2×
“One study sh wed th the urf ce deg adation rate for HDPE was similar to PLA in the marine environme t although on land PLA deg aded 20 times f ster [57].”
BackgroundMethodFarah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443 · cited 3×
“In literature, PLA is widely reported as a biodegradable polyester that can serve as an alternative to petrochemical plastics [52,53].”
BackgroundInfluentialBiological degradation of plastics: A comprehensive review
Shah, A. A., Hasan, F., Hameed, A., & Ahmed, S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.12.005 · Cited by 2,765
Biodegradable polymers for food packaging: a review
Siracusa, V., Rocculi, P., Romani, S., & Rosa, M. D. (2008) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2008.07.003 · Cited by 2,126 · cited 7×
“Poly(D,L-lactide) with 88–90% L-lactide has been widely used for packaging purpose as it is easy to process by thermoforming and displays properties similar to polystyrene [43,70].”
BackgroundInfluentialFood Packaging—Roles, Materials, and Environmental Issues
Marsh, K., & Bugusu, B. (2007) · Journal of Food Science · doi:10.1111/j.1750-3841.2007.00301.x · Cited by 1,919
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Polysaccharide-based films and coatings for food packaging: A review
Cazón, P., Velazquez, G., Ramírez, J. A., & Vázquez, M. (2017) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2016.09.009 · Cited by 1,345
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Biodegradation of bioplastics in natural environments
Emadian, S. M., Onay, T. T., & Demirel, B. (2017) · Waste Management · doi:10.1016/j.wasman.2016.10.006 · Cited by 1,168
Current progress on bio-based polymers and their future trends
Babu, R. P., O'Connor, K., & Seeram, R. (2013) · Progress in Biomaterials · doi:10.1186/2194-0517-2-8 · Cited by 1,126
Composites from renewable and sustainable resources: Challenges and innovations
Mohanty, A. K., Vivekanandhan, S., Pin, J.-M., & Misra, M. (2018) · Science · doi:10.1126/science.aat9072 · Cited by 1,032
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Food packaging: A comprehensive review and future trends
Han, J., Ruiz‐Garcia, L., Qian, J., & Yang, X. (2018) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12343 · Cited by 811
Recycling of Polymers: A Review
Ignatyev, I. A., Thielemans, W., & Vander Beke, B. (2014) · ChemSusChem · doi:10.1002/cssc.201300898 · Cited by 753
Green composites: a review of material attributes and complementary applications
Dicker, M. P. M., Duckworth, P. F., Baker, A. B., Francois, G., Hazzard, M. K., & Weaver, P. M. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.10.014 · Cited by 650
Abiotic and biotic environmental degradation of the bioplastic polymer poly(lactic acid): A review
Karamanlioglu, M., Preziosi, R., & Robson, G. D. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.01.009 · Cited by 636
Application of bioplastics for food packaging
Peelman, N., Ragaert, P., De Meulenaer, B., Adons, D., Peeters, R., Cardon, L., Van Impe, F., & Devlieghere, F. (2013) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2013.06.003 · Cited by 615
Garavand, F., Rouhi, M., Razavi, S. H., Cacciotti, I., & Mohammadi, R. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.06.093 · Cited by 563
Guillard, V., Gaucel, S., Fornaciari, C., Angellier-Coussy, H., Buche, P., & Gontard, N. (2018) · Frontiers in Nutrition · doi:10.3389/fnut.2018.00121 · Cited by 547
The quest for sustainable polyesters – insights into the future
Vilela, C., Sousa, A. F., Fonseca, A. C., Serra, A. C., Coelho, J. F. J., Freire, C. S. R., & Silvestre, A. J. D. (2014) · Polym. Chem. · doi:10.1039/c3py01213a · Cited by 527
Sustainability assessments of bio-based polymers
Hottle, T. A., Bilec, M. M., & Landis, A. E. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.016 · Cited by 525
Application of Biodegradable Polymers in Food Packaging Industry: A Comprehensive Review
Mangaraj, S., Yadav, A., Bal, L. M., Dash, S. K., & Mahanti, N. K. (2019) · Journal of Packaging Technology and Research · doi:10.1007/s41783-018-0049-y · Cited by 525
Natural fiber reinforced polylactic acid composites: A review
Siakeng, R., Jawaid, M., Ariffin, H., Sapuan, S. M., Asim, M., & Saba, N. (2019) · Polymer Composites · doi:10.1002/pc.24747 · Cited by 524
Combination of Poly(lactic) Acid and Starch for Biodegradable Food Packaging
Muller, J., González-Martínez, C., & Chiralt, A. (2017) · Materials · doi:10.3390/ma10080952 · Cited by 447
Narrowing the Gap for Bioplastic Use in Food Packaging: An Update
Zhao, X., Cornish, K., & Vodovotz, Y. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.9b03755 · Cited by 423
Production of Sustainable and Biodegradable Polymers from Agricultural Waste
Maraveas, C. (2020) · Polymers · doi:10.3390/polym12051127 · Cited by 423
A circular economy approach to plastic waste
Payne, J., McKeown, P., & Jones, M. D. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.05.014 · Cited by 385
Wróblewska-Krepsztul, J., Rydzkowski, T., Borowski, G., Szczypiński, M., Klepka, T., & Thakur, V. K. (2018) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2018.1455382 · Cited by 321
Abdul Khalil, H. P. S., Davoudpour, Y., Saurabh, C. K., Hossain, M. S., Adnan, A. S., Dungani, R., Paridah, M. T., Islam Sarker, M. Z., Fazita, M. R. N., Syakir, M. I., et al. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.072 · Cited by 306
Bioplastics and food packaging: A review
Jabeen, N., Majid, I., & Nayik, G. A. (2015) · Cogent Food & Agriculture · doi:10.1080/23311932.2015.1117749 · Cited by 288
Vegetal fibers in polymeric composites: a review
Pereira, P. H. F., Rosa, M. D. F., Cioffi, M. O. H., Benini, K. C. C. D. C., Milanese, A. C., Voorwald, H. J. C., & Mulinari, D. R. (2015) · Polímeros · doi:10.1590/0104-1428.1722 · Cited by 264
Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites
Sawpan, M. A., Pickering, K. L., & Fernyhough, A. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.12.004 · Cited by 261 · cited 1×
“Hemp fibres Twin extruder, compression and injection moulding − Increased tensile strength, young’s modulus and impact strength − Fibre treatments with alkali and saline increased tensile and impact strength [107]”
BackgroundApplication of plastics and paper as food packaging materials ? An overview
Raheem, D. (2013) · Emirates Journal of Food and Agriculture · doi:10.9755/ejfa.v25i3.11509 · Cited by 228
Qin, L., Qiu, J., Liu, M., Ding, S., Shao, L., Lü, S., Zhang, G., Zhao, Y., & Fu, X. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.11.039 · Cited by 210
Green Composites Made of Bamboo Fabric and Poly (Lactic) Acid for Packaging Applications—A Review
Nurul Fazita, M. R., Jayaraman, K., Bhattacharyya, D., Mohamad Haafiz, M. K., Saurabh, C., Hussin, M., & H.P.S., A. (2016) · Materials · doi:10.3390/ma9060435 · Cited by 206
Nanocellulose in green food packaging
Vilarinho, F., Sanches Silva, A., Vaz, M. F., & Farinha, J. P. (2018) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2016.1270254 · Cited by 203
Green composites: A review of processing technologies and recent applications
Mann, G. S., Singh, L. P., Kumar, P., & Singh, S. (2018) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705718816354 · Cited by 195
Introduction to smart polymers and their applications
Aguilar, M. R., & Román, J. S. (2014) · Elsevier eBooks · doi:10.1533/9780857097026.1 · Cited by 185
Materials for food packaging applications based on bio-based polymer nanocomposites: A review
Attaran, S. A., Hassan, A., & Wahit, M. U. (2017) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705715588801 · Cited by 170
The trends and challenges of fiber reinforced additive manufacturing
Fidan, I., Imeri, A., Gupta, A., Hasanov, S., Nasirov, A., Elliott, A., Alifui-Segbaya, F., & Nanami, N. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-03269-7 · Cited by 170
Status of Underutilised Crops in South Africa: Opportunities for Developing Research Capacity
Mabhaudhi, T., Chimonyo, V. G. P., & Modi, A. T. (2017) · Sustainability · doi:10.3390/su9091569 · Cited by 164
Exploiting recycled plastic waste as an alternative binder for paving blocks production
Agyeman, S., Obeng-Ahenkora, N. K., Assiamah, S., & Twumasi, G. (2019) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2019.e00246 · Cited by 161
Mallegni, N., Phuong, T. V., Coltelli, M., Cinelli, P., & Lazzeri, A. (2018) · Materials · doi:10.3390/ma11010148 · Cited by 140
Long-term properties and end-of-life of polymers from renewable resources
Badia-Valiente, J. D., Gil-Castell, O., & Ribes-Greus, A. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.01.002 · Cited by 139
Castro‐Aguirre, E., Auras, R. A., Selke, S. E. M., Rubino, M. I., & Marsh, T. L. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.05.017 · Cited by 137
Introduction to plastic waste and recycling
Letcher, T. M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817880-5.00001-3 · Cited by 132
Evaluation of some eco‐friendly plasticizers for PLA films processing
Darie-Niță, R. N., Vasile, C., Irimia, A., Lipşa, R., & Râpă, M. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.43223 · Cited by 129
Anderson, G., & Shenkar, N. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.115364 · Cited by 122
Sustainable Active Food Packaging from Poly(lactic acid) and Cocoa Bean Shells
Papadopoulou, E. L., Paul, U. C., Tran, T. N., Suarato, G., Ceseracciu, L., Marras, S., d’Arcy, R., & Athanassiou, A. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b09755 · Cited by 121
Tensile and Thermal Properties of Poly(lactic acid)/Eggshell Powder Composite Films
Ashok, B., Naresh, S., Reddy, K. O., Madhukar, K., Cai, J., Zhang, L., & Rajulu, A. V. (2014) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2014.879633 · Cited by 120
Scarfato, P., Maio, L. D., & Incarnato, L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42597 · Cited by 119
Aliotta, L., Gigante, V., Coltelli, M., Cinelli, P., & Lazzeri, A. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20040960 · Cited by 119
Lv, S., Zhang, Y., Gu, J., & Tan, H. (2017) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2017.08.056 · Cited by 118
Dhar, P., Gaur, S. S., Soundararajan, N., Gupta, A., Bhasney, S. M., Mili, M., Kumar, A., & Katiyar, V. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b04699 · Cited by 115
Suwanamornlert, P., Kerddonfag, N., Sane, A., Chinsirikul, W., Zhou, W., & Chonhenchob, V. (2020) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2020.100515 · Cited by 114
Isolation and screening of biopolymer-degrading microorganisms from northern Thailand
Penkhrue, W., Khanongnuch, C., Masaki, K., ., W. P.-A., Punyodom, W., & Lumyong, S. (2015) · World Journal of Microbiology and Biotechnology · doi:10.1007/s11274-015-1895-1 · Cited by 113
Advances in bio-nanocomposite materials for food packaging: a review
Kumar, N., Kaur, P., & Bhatia, S. (2017) · Nutrition & Food Science · doi:10.1108/nfs-11-2016-0176 · Cited by 111
Plant fibre-reinforced polymers: where do we stand in terms of tensile properties?
Fortea-Verdejo, M., Bumbaris, E. K., Burgstaller, C., Bismarck, A., & Lee, K. (2017) · International Materials Reviews · doi:10.1080/09506608.2016.1271089 · Cited by 109
Environmentally compatible food packaging
Chiellini, E. (2008) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845694784 · Cited by 103
The overview on the use of natural fibers reinforced composites for food packaging
Sydow, Z., & Bieńczak, K. (2018) · Journal of Natural Fibers · doi:10.1080/15440478.2018.1455621 · Cited by 102
Zhao, Y., Qiu, J., Feng, H., Zhang, M., Lei, L., & Wu, X. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.076 · Cited by 98
Current industry position on plastic production and recycling
Kosior, E., & Mitchell, J. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817880-5.00006-2 · Cited by 97
Masmoudi, F., Bessadok, A., Dammak, M., Jaziri, M., & Ammar, E. (2016) · Environmental Science and Pollution Research · doi:10.1007/s11356-016-7276-y · Cited by 96
Maroyi, A. (2017) · Journal of Ethnobiology and Ethnomedicine · doi:10.1186/s13002-017-0173-8 · Cited by 95
Biopolymers for food packaging applications
Fabra, M. J., López‐Rubio, A., & Lagaron, J. M. (2014) · Elsevier eBooks · doi:10.1533/9780857097026.2.476 · Cited by 94
Heat resistance of new biobased polymeric materials, focusing on starch, cellulose, PLA , and PHA
Peelman, N., Ragaert, P., Ragaert, K., Meulenaer, B. D., Devlieghere, F., & Cardon, L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42305 · Cited by 94
Bio-Based Nanocomposites for Food Packaging and Their Effect in Food Quality and Safety
Ramos, Ó. L., Pereira, R. N., Cerqueira, M. Â., Martins, J. T., Teixeira, J. A., Malcata, F. X., & Vicente, A. A. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-811516-9.00008-7 · Cited by 94
Effect of lignin as accelerator of the biodegradation process of poly(lactic acid)/lignin composites
da Silva, T. F., de Menezes, F. S., Montagna, L. S., Lemes, A. P., & Passador, F. R. (2019) · Materials Science and Engineering B · doi:10.1016/j.mseb.2019.114441 · Cited by 93
Bioplastics from agro-wastes for food packaging applications
de Moura, I. G., de Sá, A. V., Abreu, A. S. L. M., & Machado, A. V. A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-804302-8.00007-8 · Cited by 90
An overview of bio-based polymers for packaging materials
Pan, Y., Farmahini‐Farahani, M., O'Hearn, P., Xiao, H., & Ocampo, H. (1996) · Journal of Bioresources and Bioproducts · doi:10.21967/jbb.v1i3.49 · Cited by 86
Food contact substances and chemicals of concern: a comparison of inventories
Geueke, B., Wagner, C. C., & Muncke, J. (2014) · Food Additives & Contaminants Part A · doi:10.1080/19440049.2014.931600 · Cited by 82
Biopolymers as Food Packaging Materials
Porta, R., Sabbah, M., & Pierro, P. D. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21144942 · Cited by 81
Environmentally Compatible Food Packaging
(2008) · CRC Press eBooks · doi:10.1201/9781439832783 · Cited by 79
Faludi, G., Dora, G., Imre, B., Renner, K. E., Móczó, J., & Pukánszky, B. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39902 · Cited by 79
The Use of Biopolymers in Food Packaging
Adeyeye, O. A., Sadiku, E. R., Reddy, A. B., Ndamase, A. S., Makgatho, G., Sellamuthu, P. S., Perumal, A. B., Nambiar, R. B., Fasiku, V. O., Ibrahim, I. D., et al. (2019) · Materials horizons · doi:10.1007/978-981-13-8063-1_6 · Cited by 79
Cellulose extracted from rice husk as filler for poly(lactic acid): preparation and characterization
Battegazzore, D., Bocchini, S., Alongi, J., Frache, A., & Marino, F. (2014) · Cellulose · doi:10.1007/s10570-014-0207-5 · Cited by 76
Panseri, S., Martino, P. A., Cagnardi, P., Celano, G., Tedesco, D., Castrica, M., Balzaretti, C. M., & Chiesa, L. M. (2017) · Food Chemistry · doi:10.1016/j.foodchem.2017.12.067 · Cited by 76
Biopolymers as Food Packaging Materials
Grujić, R., Vujadinović, D., & Savanović, D. (2017) · Springer eBooks · doi:10.1007/978-3-319-62767-0_8 · Cited by 73
A circular economy response to plastic pollution: Current policy landscape and consumer perception
de Kock, L., Sadan, Z., Arp, R., & Upadhyaya, P. (2020) · South African Journal of Science · doi:10.17159/sajs.2020/8097 · Cited by 72
Bioplastics for Food Packaging
Byun, Y., & Kim, Y. T. (2013) · Elsevier eBooks · doi:10.1016/b978-0-12-394601-0.00014-x · Cited by 68
Functionality and Properties of Bio-based Materials
Pandit, P., Nadathur, G. T., Maiti, S., & Regubalan, B. (2018) · Springer eBooks · doi:10.1007/978-981-13-1909-9_4 · Cited by 68
Jacob, J., Lawal, U., Thomas, S., & Valapa, R. B. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818795-1.00004-6 · Cited by 60
Biopolymer-Based Lightweight Materials for Packaging Applications
Hu, B. S. (2014) · ACS symposium series · doi:10.1021/bk-2014-1175.ch013 · Cited by 56
Food Packaging Materials: Testing & Quality Assurance
Singh, P., Wani, A. A., & Langowski, H.-C. (2017) · doi:10.1201/9781315374390 · Cited by 55
Totaro, G., Sisti, L., Fiorini, M., Lancellotti, I., Andreola, F., & Saccani, A. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01447-6 · Cited by 52
Mechanical Properties of Poly (lactic acid) Composites Reinforced with CaCO3 Eggshell Based Fillers
Betancourt, N., & Cree, D. E. (2017) · MRS Advances · doi:10.1557/adv.2017.473 · Cited by 51
Kamthai, S., & Magaraphan, R. (2018) · Packaging Technology and Science · doi:10.1002/pts.2420 · Cited by 48
Righetti, M. C., Cinelli, P., Mallegni, N., Massa, C. A., Aliotta, L., & Lazzeri, A. (2019) · Materials · doi:10.3390/ma12060990 · Cited by 39
Lignocellulosic Materials and Their Use in Bio-based Packaging
Ballesteros, L. F., Michelin, M., Vicente, A. A., Teixeira, J. A., & Cerqueira, M. Â. (2018) · Springer briefs in molecular science · doi:10.1007/978-3-319-92940-8 · Cited by 36
Cecchi, T., Giuliani, A., Iacopini, F., Santulli, C., Fabrizio Sarasini, A., & Tirillò, J. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-04187-1 · Cited by 34
Grząbka‐Zasadzińska, A., Kłapiszewski, Ł., Borysiak, S., & Jesionowski, T. (2018) · Materials · doi:10.3390/ma11112257 · Cited by 33
Nešić, A., Castillo, C., Castaño-Rivera, P., Cabrera‐Barjas, G., & Serrano, J. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818493-6.00008-7 · Cited by 32
Hazards of Food Contact Material: Food Packaging Contaminants
Muncke, J. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-378612-8.00218-3 · Cited by 29
Rapisarda, M., Patanè, C., Pellegrino, A., Malvuccio, A., Rizzo, V., Muratore, G., & Rizzarelli, P. (2020) · Materials · doi:10.3390/ma13153432 · Cited by 29
Hammiche, D., Boukerrou, A., Bettache, A., Guermazi, N., & Budtova, T. (2019) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2019.1567083 · Cited by 28
Soil Degradation Characteristics of Short Sisal/PLA Composites
Rajesh, G., Prasad, A. V. R., & Gupta, A. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.270 · Cited by 27
Imam, S. H., Glenn, G. M., & Chiellini, E. (2012) · Elsevier eBooks · doi:10.1533/9780857095664.4.435 · Cited by 26
Waste Management in Food Packaging Industry
kumar, G. M., Irshad, A., Raghunath, B. V., & Rajarajan, G. (2016) · Environmental science and engineering · doi:10.1007/978-3-319-27228-3_24 · Cited by 25
Bio-Plastics: A Perfect Tool for Eco-Friendly Food Packaging: A Review
Kumar, Y., Shukla, P., & Singh, P. (2014) · Cited by 22
Song, J., Kay, M., & Coles, R. (2011) · Wiley eBooks · doi:10.1002/9781444392180.ch11 · Cited by 22
Definitions, Functions, Attributes and Environments of Food Packaging
Robertson, G. L. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-100596-5.22537-7 · Cited by 20
Dukaļska, L., Ungure, E., Augšpole, I., Muižniece-Brasava, S., Levkane, V., Rakčejeva, T., & Krasnova, I. (2013) · Rural Sustainability Research · doi:10.2478/plua-2013-0011 · Cited by 14
Marsh, K. S. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100596-5.03379-5 · Cited by 11
Consumer attitude to food packaging and the market for environmentally compatible products
Arvanitoyannis, I. S., & Kassaveti, A. (2008) · Elsevier eBooks · doi:10.1533/9781845694784.2.161 · Cited by 10
Stiff Biodegradable Polylactide Composites with Ultrafine Cellulose Filler
Cichorek, M., Piórkowska, E., & Krasnikova, N. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0788-1 · Cited by 10
Eco-design of food and beverage packaging
Han, J., Lee, D. S., Min, S. C., & Chung, M. S. (2012) · Elsevier eBooks · doi:10.1533/9780857095664.4.361 · Cited by 9
Madhuri, K. S., Rao, H. R., & Reddy, B. C. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.06.355 · Cited by 4
Mohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Cited by
An Overview of Plastic Waste Generation and Management in Food Packaging Industries
Ncube, L. K., Ude, A. U., Ogunmuyiwa, E. N., Zulkifli, R., & Beas, I. N. (2021) · Recycling · doi:10.3390/recycling6010012 · Cited by 647
Self-citationSwetha, T. A., Bora, A., Mohanrasu, K., Balaji, P., Raja, R., Ponnuchamy, K., Muthusamy, G., & Arun, A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123715 · Cited by 630
Applications of biodegradable materials in food packaging: A review
Cheng, J., Gao, R., Zhu, Y., & Lin, Q. (2024) · Alexandria Engineering Journal · doi:10.1016/j.aej.2024.01.080 · Cited by 312
Sustainable bioplastics derived from renewable natural resources for food packaging
Zhao, X., Wang, Y., Chen, X., Yu, X., Li, W., Zhang, S., Meng, X., Zhao, Z.-M., Dong, T., Anderson, A., et al. (2023) · Matter · doi:10.1016/j.matt.2022.11.006 · Cited by 303
Wang, M., Li, Q., Shi, C., Lv, J., Xu, Y., Yang, J., Chua, S. L., Jia, L., Chen, H., Liu, Q., et al. (2023) · Nature Nanotechnology · doi:10.1038/s41565-023-01329-y · Cited by 263
Metadata
- Authors
- Ncube, L. K., Ude, A. U., Ogunmuyiwa, E. N., Zulkifli, R., & Beas, I. N.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2020-11-06
- Volume
- 13
- Issue
- 21
- Pages
- 4994
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W3096905319
- Cited by
- 736
- References
- 110
- FWCI
- 14.27
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.