The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Antioxidant PLA Composites Containing Lignin for 3D Printing Applications: A Potential Material for Healthcare Applications
Open accessAbstract
Lignin (LIG) is a natural biopolymer with well-known antioxidant capabilities. Accordingly, in the present work, a method to combine LIG with poly(lactic acid) (PLA) for fused filament fabrication applications (FFF) is proposed. For this purpose, PLA pellets were successfully coated with LIG powder and a biocompatible oil (castor oil). The resulting pellets were placed into an extruder at 200 °C. The resulting PLA filaments contained LIG loadings ranging from 0% to 3% (w/w). The obtained filaments were successfully used for FFF applications. The LIG content affected the mechanical and surface properties of the overall material. The inclusion of LIG yielded materials with lower resistance to fracture and higher wettabilities. Moreover, the resulting 3D printed materials showed antioxidant capabilities. By using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) method, the materials were capable of reducing the concentration of this compound up to ca. 80% in 5 h. This radical scavenging activity could be potentially beneficial for healthcare applications, especially for wound care. Accordingly, PLA/LIG were used to design meshes with different designs for wound dressing purposes. A wound healing model compound, curcumin (CUR), was applied in the surface of the mesh and its diffusion was studied. It was observed that the dimensions of the meshes affected the permeation rate of CUR. Accordingly, the design of the mesh could be modified according to the patient’s needs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The estimation of the bactericidal power of the blood
Miles, A. A., Misra, S. S., & Irwin, J. O. (1938) · Epidemiology and Infection · doi:10.1017/s002217240001158x · Cited by 3,583
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Plastics, the environment and human health: current consensus and future trends
Thompson, R. C., Moore, C. J., vom Saal, F. S., & Swan, S. H. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2009.0053 · Cited by 3,032
Towards lignin-based functional materials in a sustainable world
Kai, D., Tan, M. J., Chee, P. L., Chua, Y. K., Yap, Y. L., & Loh, X. J. (2016) · Green Chemistry · doi:10.1039/c5gc02616d · Cited by 1,267
Lignin as a base material for materials applications: Chemistry, application and economics
Stewart, D. (2008) · Industrial Crops and Products · doi:10.1016/j.indcrop.2007.07.008 · Cited by 760
3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges
Jamróz, W., Szafraniec, J., Kurek, M., & Jachowicz, R. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2454-x · Cited by 707
Recent advances in green hydrogels from lignin: a review
Thakur, V. K., & Thakur, M. K. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.09.044 · Cited by 622
Fused-filament 3D printing (3DP) for fabrication of tablets
Goyanes, A., Buanz, A. B. M., Basit, A. W., & Gaisford, S. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.09.044 · Cited by 587
3D Printing Pharmaceuticals: Drug Development to Frontline Care
Trenfield, S. J., Awad, A., Goyanes, A., Gaisford, S., & Basit, A. W. (2018) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2018.02.006 · Cited by 502
Figueiredo, P., Lintinen, K., Kiriazis, A., Hynninen, V., Liu, Z., Bauleth-Ramos, T., Rahikkala, A., Correia, A., Kohout, T., Sarmento, B., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.12.034 · Cited by 398
Stewart, S. A., Domínguez-Robles, J., Donnelly, R. F., & Larrañeta, E. (2018) · Polymers · doi:10.3390/polym10121379 · Cited by 390
Self-citationEffect of wood content in FDM filament on properties of 3D printed parts
Kariz, M., Sernek, M., Obućina, M., & Kuzman, M. K. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.12.016 · Cited by 360
Antimicrobial and antioxidant activities of lignin from residue of corn stover to ethanol production
Dong, X., Dong, M., Lu, Y., Turley, A., Jin, T., & Wu, C. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.06.002 · Cited by 341
3D printing for chemical, pharmaceutical and biological applications
Capel, A. J., Rimington, R. P., Lewis, M. P., & Christie, S. D. R. (2018) · Nature Reviews Chemistry · doi:10.1038/s41570-018-0058-y · Cited by 312
McIlroy, C., & Olmsted, P. D. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.051 · Cited by 308
Larrañeta, E., Henry, M., Irwin, N. J., Trotter, J., Perminova, A. A., & Donnelly, R. F. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.12.015 · Cited by 269
Self-citationLarrañeta, E., Imízcoz, M., Toh, J. X., Irwin, N. J., Ripolin, A., Perminova, A., Domínguez-Robles, J., Rodríguez, A., & Donnelly, R. F. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01371 · Cited by 247
Self-citationAzadfar, M., Gao, A. H., Bule, M. V., & Chen, S. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.12.049 · Cited by 213
Characterization of plastic packaging additives: Food contact, stability and toxicity
Cherif Lahimer, M., Ayed, N., Horriche, J., & Belgaied, S. (2017) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.07.022 · Cited by 213
3D‐Printing Strong High‐Resolution Antioxidant Bioresorbable Vascular Stents
van Lith, R., Baker, E., Ware, H., Yang, J., Farsheed, A. C., Sun, C., & Ameer, G. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600138 · Cited by 189
Recent Advances in 3D Printing of Aliphatic Polyesters
Chiulan, I., Frone, A., Brandabur, C., & Panaitescu, D. (2017) · Bioengineering · doi:10.3390/bioengineering5010002 · Cited by 189
Kai, D., Low, Z. W., Liow, S. S., Abdul Karim, A., Ye, H., Jin, G., Li, K., & Loh, X. J. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00405 · Cited by 184
Kai, D., Zhang, K., Lu, J., Wong, H. Z., Li, Z., Zhang, Z., & Loh, X. J. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00850 · Cited by 176
Generating and Reversing Chronic Wounds in Diabetic Mice by Manipulating Wound Redox Parameters
Dhall, S., Do, D. C., Garcia, M., Kim, J. H., Mirebrahim, S. H., Lyubovitsky, J. G., Lonardi, S., Nothnagel, E. A., Schiller, N. L., & Martins‐Green, M. M. (2014) · Journal of Diabetes Research · doi:10.1155/2014/562625 · Cited by 165
Wang, R., Neoh, K. G., Shi, Z., Kang, E. T., Tambyah, P. A., & Chiong, E. (2011) · Biotechnology and Bioengineering · doi:10.1002/bit.23342 · Cited by 160
Lignin-based hydrogels with “super-swelling” capacities for dye removal
Domínguez‐Robles, J., Peresin, M. S., Tamminen, T., Rodríguez, A., Larrañeta, E., & Jääskeläinen, A.-S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.04.044 · Cited by 141
Self-citationIsolation and characterization of lignocellulose nanofibers from different wheat straw pulps
Sánchez, R., Espinosa, E., Domínguez‐Robles, J., Loaiza, J. M., & Rodríguez, A. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.08.019 · Cited by 120
Self-citationCost estimates of kraft lignin recovery by ultrafiltration
Jönsson, A., & Wallberg, O. (2009) · Desalination · doi:10.1016/j.desal.2007.11.061 · Cited by 119
van Lith, R., Gregory, E. K., Yang, J. H., Kibbe, M. R., & Ameer, G. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.06.004 · Cited by 116
In vitro antioxidant and antidiabetic activities of biomodified lignin from Acacia nilotica wood
Barapatre, A., Aadil, K. R., Tiwary, B. N., & Jha, H. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.01.012 · Cited by 115
Moseley, R., Walker, M., Waddington, R. J., & Chen, W. Y. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00540-9 · Cited by 103
Dhall, S., Do, D. C., Garcia, M., Wijesinghe, D. S., Brandon, A. P., Kim, J. H., Sanchez, A., Lyubovitsky, J. G., Gallagher, S., Nothnagel, E. A., et al. (2014) · PLoS ONE · doi:10.1371/journal.pone.0109848 · Cited by 102
Wang, X., Jia, Y., Liu, Z., & Miao, J. (2018) · Polymers · doi:10.3390/polym10091013 · Cited by 96
Ajalloueian, F., Tavanai, H., Hilborn, J. G., Donzel‐Gargand, O., Leifer, K., Wickham, A., & Arpanaei, A. (2014) · BioMed Research International · doi:10.1155/2014/475280 · Cited by 90
A novel lignin-based nanofibrous dressing containing arginine for wound-healing applications
Reesi, F., Minaiyan, M., & Taheri, A. (2017) · Drug Delivery and Translational Research · doi:10.1007/s13346-017-0441-0 · Cited by 81
Eraković, S., Janković, A., Tsui, C. P., Tang, C. Y., Mišković‐Stanković, V., & Stevanović, T. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms150712294 · Cited by 78
Domínguez‐Robles, J., Sánchez, R., Díaz‐Carrasco, P., Espinosa, E., García‐Domínguez, M. T., & Rodríguez, A. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.07.015 · Cited by 73
Self-citationInfluence of slicing tools on quality of 3D printed parts
Baumann, F. W., Bugdayci, H., Grunert, J., Keller, F., & Roller, D. H. (2015) · Computer-Aided Design and Applications · doi:10.1080/16864360.2015.1059184 · Cited by 62
Lücking, T. H., Sambale, F., Schnaars, B., Bulnes‐Abundis, D., Beutel, S., & Scheper, T. H. (2014) · Engineering in Life Sciences · doi:10.1002/elsc.201400094 · Cited by 55
Jones, D. S., McGovern, J. G., Woolfson, A. D., & Gorman, S. P. (1997) · Biomaterials · doi:10.1016/s0142-9612(96)00170-6 · Cited by 51
Antioxidant Activity of the Lignins Derived from Fluidized-Bed Fast Pyrolysis
Qazi, S. S., Li, D., Briens, C. L., Berruti, F., & Abou‐Zaid, M. M. (2017) · Molecules · doi:10.3390/molecules22030372 · Cited by 44
Meullemiestre, A., Kamal, I., Maache‐Rezzoug, Z., Chemat, F., & Rezzoug, S.-A. (2013) · Waste and Biomass Valorization · doi:10.1007/s12649-013-9237-8 · Cited by 31
An Infection-Responsive Approach To Reduce Bacterial Adhesion in Urinary Biomaterials
McCoy, C. P., Irwin, N., Brady, C., Jones, D. S., Carson, L., Andrews, G. P., & Gorman, S. P. (2016) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.6b00402 · Cited by 31
Self-citation
Cited by
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Guo, S., Ren, Y., Chang, R., He, Y., Zhang, D., Guan, F., & Yao, M. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c08870 · Cited by 520
Lignin valorization: Status, challenges and opportunities
Sethupathy, S., Murillo Morales, G., Gao, L., Wang, H., Yang, B., Jiang, J., Sun, J., & Zhu, D. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2022.126696 · Cited by 473
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 454
Current advancement on the isolation, characterization and application of lignin
Liao, J. J., Latif, N. H. A., Trache, D., Brosse, N., & Hussin, M. H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.168 · Cited by 425
Metadata
- Authors
- Domínguez-Robles, J., Martin, N. K., Fong, M. L., Stewart, S. A., Irwin, N. J., Rial-Hermida, M. I., Donnelly, R. F., & Larrañeta, E.
- Venue
- Pharmaceutics
- Publisher
- MDPI AG
- Published
- 2019-04-04
- Volume
- 11
- Issue
- 4
- Pages
- 165
- ISSN
- 1999-4923 (ISSN-L)
- OpenAlex
- W2928062382
- Cited by
- 281
- References
- 43
- FWCI
- 8.47
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.