The DOI matches its Crossref record; 148 of the 148 references it cites were found in a registry or an index.
Electrospinning of Potential Medical Devices (Wound Dressings, Tissue Engineering Scaffolds, Face Masks) and Their Regulatory Approach
Open accessAbstract
Electrospinning is the simplest and most widely used technology for producing ultra-thin fibers. During electrospinning, the high voltage causes a thin jet to be launched from the liquid polymer and then deposited onto the grounded collector. Depending on the type of the fluid, solution and melt electrospinning are distinguished. The morphology and physicochemical properties of the produced fibers depend on many factors, which can be categorized into three groups: process parameters, material properties, and ambient parameters. In the biomedical field, electrospun nanofibers have a wide variety of applications ranging from medication delivery systems to tissue engineering scaffolds and soft electronics. Many of these showed promising results for potential use as medical devices in the future. Medical devices are used to cure, prevent, or diagnose diseases without the presence of any active pharmaceutical ingredients. The regulation of conventional medical devices is strict and carefully controlled; however, it is not yet properly defined in the case of nanotechnology-made devices. This review is divided into two parts. The first part provides an overview on electrospinning through several examples, while the second part focuses on developments in the field of electrospun medical devices. Additionally, the relevant regulatory framework is summarized at the end of this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The high specific surface area of electrospinning is conducive to cell attachment and growth, and the porous structure is conducive to the infiltration and exchange of nutrients [75–77].”
From Application of PLCL as a biodegradable polymer in biomedical engineering (2026) · cites this paper as [77]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Zhu, C., Cao, R., Zhang, Y., & Chen, R. (2021) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2021.660571 · Cited by 22
RetractedElectrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028 · cited 1×
“The majority of papers showed a significant indirect influence of temperature on fiber diameter and morphology, concluding that the inverse connection between temperature and viscosity may be exploited to modify nanofibers [34,35].”
BackgroundElectrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
Xue, J., Wu, T., Dai, Y., & Xia, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00593 · Cited by 5,015
Disintegration of water drops in an electric field
Taylor, G. I. (1964) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1964.0151 · Cited by 3,305 · cited 1×
“The cone is named after Sir Geoffrey Taylor, who first modeled the phenomenon in 1964 [8].”
BackgroundElectrospinning: Applications in drug delivery and tissue engineering
Sill, T. J., & von Recum, H. A. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.01.011 · Cited by 3,289 · cited 1×
“In this way, the flight distance of the jet (tip-to-collector distance in the case of nozzle electrospinning) affects the fiber morphology [3,18].”
BackgroundElectrospinning jets and polymer nanofibers
Reneker, D. H., & Yarin, A. L. (2008) · Polymer · doi:10.1016/j.polymer.2008.02.002 · Cited by 2,306
Skin Wound Healing Process and New Emerging Technologies for Skin Wound Care and Regeneration
Tottoli, E. M., Dorati, R., Genta, I., Chiesa, E., Pisani, S., & Conti, B. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12080735 · Cited by 1,340 · cited 1×
“As in wound dressings and tissue engineering, the ability of nanofibers to produce aligned scaffolds capable of mimicking the extracellular matrix is exploited [74,75].”
BackgroundDirect Fabrication of Composite and Ceramic Hollow Nanofibers by Electrospinning
Li, D., & Xia, Y. (2004) · Nano Letters · doi:10.1021/nl049590f · Cited by 1,300
Electrospinning of polymeric nanofibers for drug delivery applications
Hu, X., Liu, S., Zhou, G., Huang, Y., Xie, Z., & Jing, X. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.04.018 · Cited by 1,190 · cited 1×
“Additional benefits are the tailorable release profile, the high loading capacity, the high encapsulation efficiency, the ease of operation, and the cost-effectiveness [73].”
BackgroundIndustrial Upscaling of Electrospinning and Applications of Polymer Nanofibers: A Review
Persano, L., Camposeo, A., Tekmen, C., & Pisignano, D. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200290 · Cited by 965
Cited by
Nanofibers: A current era in drug delivery system
Hiwrale, A., Bharati, S., Pingale, P., & Rajput, A. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e18917 · Cited by 203
“The liquid’s viscosity get enhanced due to higher molecular weight and concentration [48,49].”
BackgroundKurowiak, J., Klekiel, T., & Będziński, R. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms242316952 · Cited by 164
Machine learning applications for electrospun nanofibers: a review
Subeshan, B., Atayo, A., & Asmatulu, E. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-09994-7 · Cited by 140
“The high surface area inherent in this narrow fluid jet facilitates a quick loss of solvent, thereby accelerating the transformation of the fluid jet into a solidified fiber [7].”
Lian, S., Lamprou, D. A., & Zhao, M. (2023) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2023.123641 · Cited by 107
Recent Progress of Electrospun Nanofiber Dressing in the Promotion of Wound Healing
Lu, X., Zhou, L., & Song, W. (2024) · Polymers · doi:10.3390/polym16182596 · Cited by 102
“As the voltage increases, the hemispherical droplets at the needle mouth experience a growing electric field force, leading to the formation of a “Taylor cone” [34].”
Background
Metadata
- Authors
- Uhljar, L. É., & Ambrus, R.
- Affiliations
- University of Szeged (HU)
- Corresponding author
- Ambrus, Rita
- Venue
- Pharmaceutics
- Publisher
- MDPI AG
- Published
- 2023-01-26
- Volume
- 15
- Issue
- 2
- Pages
- 417
- ISSN
- 1999-4923 (ISSN-L)
- PMC
- PMC9965305
- OpenAlex
- W4318204417
- Semantic Scholar
- a0ee75c042054ec481325e17c8050b001a071ceb
- Cited by
- 108
- References
- 148
- Citations by year
- 2026: 26 · 2025: 41 · 2024: 23 · 2023: 18
- FWCI
- 1.89
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Pharmaceutics (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Ministry of Human Capacities, Hungary (TKP2021-EGA-32, 2019-2.1.11-TÉT-2020-00147)
- Hungarian–Slovenian Bilateral project (TKP2021-EGA-32, 2019-2.1.11-TÉT-2020-00147)
- Gedeon Richter’s Talentum Foundation, Gedeon Richter Plc (TKP2021-EGA-32, 2019-2.1.11-TÉT-2020-00147)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Materials Science › Biomaterials › Silk-based biomaterials and applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
- Keywords
- electrospinning, electrospun nanofibers, medical devices, wound dressings, tissue engineering scaffolds, face masks, nanofiber morphology, medical device regulation, nanotechnology regulation, drug delivery systems, soft electronics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrospinning of Potential Medical Devices (Wound Dressings, Tissue Engineering Scaffolds, Face Masks) and Their Regulatory Approach. https://app.cochat.ai/papers/10.3390/pharmaceutics15020417
- The paper
- Uhljar, L. É., & Ambrus, R. (2023). Electrospinning of Potential Medical Devices (Wound Dressings, Tissue Engineering Scaffolds, Face Masks) and Their Regulatory Approach. Pharmaceutics. https://doi.org/10.3390/pharmaceutics15020417
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.