The DOI matches its Crossref record; 159 of the 159 references it cites were found in a registry or an index.
Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate): Enhancement Strategies for Advanced Applications
Open accessAbstract
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), PHBV, is a microbial biopolymer with excellent biocompatible and biodegradable properties that make it a potential candidate for substituting petroleum-derived polymers. However, it lacks mechanical strength, water sorption and diffusion, electrical and/or thermal properties, antimicrobial activity, wettability, biological properties, and porosity, among others, limiting its application. For this reason, many researchers around the world are currently working on how to overcome the drawbacks of this promising material. This review summarises the main advances achieved in this field so far, addressing most of the chemical and physical strategies to modify PHBV and placing particular emphasis on the combination of PHBV with other materials from a variety of different structures and properties, such as other polymers, natural fibres, carbon nanomaterials, nanocellulose, nanoclays, and nanometals, producing a wide range of composite biomaterials with increased potential applications. Finally, the most important methods to fabricate porous PHBV scaffolds for tissue engineering applications are presented. Even though great advances have been achieved so far, much research needs to be conducted still, in order to find new alternative enhancement strategies able to produce advanced PHBV-based materials able to overcome many of these challenges.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED ARTICLE: Towards understanding polyhydroxyalkanoates and their use
Kushwah, B. S., Kushwah, A. V. S., & Singh, V. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-0988-3 · Cited by 31
RetractedHelical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Liu, S., Zeng, T. H., Hofmann, M., Burcombe, E., Wei, J., Jiang, R., Kong, J., & Chen, Y. (2011) · ACS Nano · doi:10.1021/nn202451x · Cited by 2,929
Occurrence, metabolism, metabolic role, and industrial uses of bacterial polyhydroxyalkanoates
Anderson, A. J., & DAWES, E. A. (1990) · Microbiological Reviews · doi:10.1128/mmbr.54.4.450-472.1990 · Cited by 2,912
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Synthesis, structure and properties of polyhydroxyalkanoates: biological polyesters
Sudesh, K., Abe, H., & Doi, Y. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00035-6 · Cited by 2,254
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Haider, A., Haider, S., & Kang, I.-K. (2018) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2015.11.015 · Cited by 1,861
(2001) · Topics in Applied Physics · doi:10.1007/3-540-39947-x · Cited by 1,748
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Additive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
The application of polyhydroxyalkanoates as tissue engineering materials
Chen, G.-Q., & Wu, Q. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.036 · Cited by 1,418
Malafaya, P. B., Silva, G. A., & Reis, R. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.012 · Cited by 1,401
Functionalized hexagonal boron nitride nanomaterials: emerging properties and applications
Weng, Q., Wang, X., Wang, X., Bando, Y., & Golberg, D. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00869g · Cited by 1,282
Polymeric materials with antimicrobial activity
Muñoz-Bonilla, A., & Fernández-García, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.08.005 · Cited by 1,221
Polymer surface modification by plasmas and photons
Chan, C.-M., Ko, T.-M., & Hiraoka, H. (1996) · Surface Science Reports · doi:10.1016/0167-5729(96)80003-3 · Cited by 1,074
Fabry - Perot interference in a nanotube electron waveguide
Liang, W., Bockrath, M., Bozovic, D., Hafner, J. H., Tinkham, M., & Park, H. (2001) · Nature · doi:10.1038/35079517 · Cited by 958
Bugnicourt, E., Cinelli, P., Lazzeri, A., & Alvarez, V. (2014) · Express Polymer Letters · doi:10.3144/expresspolymlett.2014.82 · Cited by 943
Thermosetting (bio)materials derived from renewable resources: A critical review
Raquez, J.-M., Deléglise, M., Lacrampe, M.-F., & Krawczak, P. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.001 · Cited by 910
Polyhydroxyalkanoates: biodegradable polymers with a range of applications
Philip, S., Keshavarz, T., & Roy, I. (2007) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1667 · Cited by 883
Recent advances in microbial polyhydroxyalkanoates
Khanna, S., & Srivastava, A. K. (2005) · Process Biochemistry · doi:10.1016/j.procbio.2004.01.053 · Cited by 762
Yan, L., Kasal, B., & Huang, L. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.02.002 · Cited by 635
Polyhydroxyalkanoates: opening doors for a sustainable future
Li, Z., Yang, J., & Loh, X. J. (2016) · NPG Asia Materials · doi:10.1038/am.2016.48 · Cited by 625
Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites
Majeed, K., Jawaid, M., Hassan, A., Abu Bakar, A., Abdul Khalil, H. P. S., Salema, A. A., & Inuwa, I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.10.044 · Cited by 617
A review of plant-derived essential oils in ruminant nutrition and production
Benchaar, C., Calsamiglia, S., Chaves, A. V., Fraser, G. R., Colombatto, D., McAllister, T. A., & Beauchemin, K. A. (2008) · Animal Feed Science and Technology · doi:10.1016/j.anifeedsci.2007.04.014 · Cited by 615
Polyhydroxyalkanoates, biopolyesters from renewable resources: Physiological and engineering aspects
Braunegg, G., Lefebvre, G., & Genser, K. F. (1998) · Journal of Biotechnology · doi:10.1016/s0168-1656(98)00126-6 · Cited by 536
Graphene: a versatile nanoplatform for biomedical applications
Zhang, Y., Nayak, T. R., Hong, H., & Cai, W. (2012) · Nanoscale · doi:10.1039/c2nr31040f · Cited by 530
Plastic bacteria? Progress and prospects for polyhydroxyalkanoate production in bacteria
Lee, S. Y. (1996) · Trends in Biotechnology · doi:10.1016/0167-7799(96)10061-5 · Cited by 529
Start a Research on Biopolymer Polyhydroxyalkanoate (PHA): A Review
Tan, G.-Y., Chen, C.-L., Li, L., Ge, L., Wang, L., Razaad, I., Li, Y., Zhao, L., Mo, Y., & Wang, J.-Y. (2014) · Polymers · doi:10.3390/polym6030706 · Cited by 524
Review of nanocellulose for sustainable future materials
Kim, J.-H., Shim, B. S., Kim, H. S., Lee, Y.-J., Min, S.-K., Jang, D., Abas, Z., & Kim, J. (2015) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-015-0024-9 · Cited by 498
Graphene substrates promote adherence of human osteoblasts and mesenchymal stromal cells
Kalbacova, M., Broz, A., Kong, J., & Kalbac, M. (2010) · Carbon · doi:10.1016/j.carbon.2010.07.045 · Cited by 446
Carbon nanofibers and carbon nanotubes in regenerative medicine
Tran, P. A., Zhang, L., & Webster, T. J. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.07.010 · Cited by 444
Emiroğlu, Z. K., Yemiş, G. P., Coşkun, B. K., & Candoğan, K. (2010) · Meat Science · doi:10.1016/j.meatsci.2010.04.016 · Cited by 438
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
Biodegradable compatibilized polymer blends for packaging applications: A literature review
Muthuraj, R., Misra, M., & Mohanty, A. K. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.45726 · Cited by 391
Macromolecular plasma-chemistry: an emerging field of polymer science
DENES, F. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.05.001 · Cited by 374
Serafim, L. S., Lemos, P. C., Oliveira, R., & Reis, M. A. M. (2004) · Biotechnology and Bioengineering · doi:10.1002/bit.20085 · Cited by 374
Degradation of poly (D,L-lactic acid) microspheres: Effect of molecular weight
Park, T. G. (1994) · Journal of Controlled Release · doi:10.1016/0168-3659(94)90263-1 · Cited by 359
Avella, M., Martuscelli, E., & Raimo, M. (2000) · Journal of Materials Science · doi:10.1023/a:1004740522751 · Cited by 357
Muhammadi, Shabina, Afzal, M., & Hameed, S. (2015) · Green Chemistry Letters and Reviews · doi:10.1080/17518253.2015.1109715 · Cited by 357
Díez-Pascual, A. M., & Díez-Vicente, A. L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502261e · Cited by 295
Isolation and recovery of microbial polyhydroxyalkanoates
Kunasundari, B., & Sudesh, K. (2011) · Express Polymer Letters · doi:10.3144/expresspolymlett.2011.60 · Cited by 293
PHB packaging for the storage of food products
Bucci, D. Z., Tavares, L. B. B., & Sell, I. (2005) · Polymer Testing · doi:10.1016/j.polymertesting.2005.02.008 · Cited by 280
Wood fiber reinforced bacterial bioplastic composites: Fabrication and performance evaluation
SINGH, S., & MOHANTY, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.11.009 · Cited by 268
Singh, S., Mohanty, A. K., Sugie, T., Takai, Y., & Hamada, H. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.01.004 · Cited by 244
Effect of biodegradable plasticizers on thermal and mechanical properties of poly(3-hydroxybutyrate)
Choi, J. S., & Park, W. H. (2004) · Polymer Testing · doi:10.1016/j.polymertesting.2003.09.005 · Cited by 237
Design and fabrication of porous biodegradable scaffolds: a strategy for tissue engineering
Raeisdasteh Hokmabad, V., Davaran, S., Ramazani, A., & Salehi, R. (2017) · Journal of Biomaterials Science, Polymer Edition · doi:10.1080/09205063.2017.1354674 · Cited by 217
Miscibility, properties, and biodegradability of microbial polyester containing blends
Ha, C. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00050-8 · Cited by 216
Nanotechnology for bioplastics: opportunities, challenges and strategies
Lagaron, J. M., & Lopez-Rubio, A. (2011) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2011.01.007 · Cited by 199
Azevedo, H., & Reis, R. (2004) · Biodegradable Systems in Tissue Engineering and Regenerative Medicine · doi:10.1201/9780203491232.ch12 · Cited by 191
Carli, L. N., Crespo, J. S., & Mauler, R. S. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.07.007 · Cited by 186
Biodegradation of polyhydroxyalkanoates
Mergaert, J. (1992) · FEMS Microbiology Letters · doi:10.1016/0378-1097(92)90325-i · Cited by 186
Zhao, H., Cui, Z., Wang, X., Turng, L.-S., & Peng, X. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.02.034 · Cited by 175
Avérous, L., & Pollet, E. (2012) · Green Energy and Technology · doi:10.1007/978-1-4471-4108-2_2 · Cited by 172
Sanchez-Garcia, M. D., Lagaron, J. M., & Hoa, S. V. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.02.015 · Cited by 169
Xing, Z.-C., Chae, W.-P., Baek, J.-Y., Choi, M.-J., Jung, Y., & Kang, I.-K. (2010) · Biomacromolecules · doi:10.1021/bm1000372 · Cited by 168
Liu, Q.-S., Zhu, M.-F., Wu, W.-H., & Qin, Z.-Y. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.016 · Cited by 159
Berthet, M.-A., Angellier‐Coussy, H., Chea, V., Guillard, V., Gastaldi, E., & Gontard, N. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.02.006 · Cited by 155
Morphology and molten-state rheology of polylactide and polyhydroxyalkanoate blends
Gérard, T., & Budtova, T. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.03.015 · Cited by 151
Castro-Mayorga, J. L., Fabra, M. J., Pourrahimi, A. M., Olsson, R. T., & Lagaron, J. M. (2016) · Food and Bioproducts Processing · doi:10.1016/j.fbp.2016.10.007 · Cited by 148
Biodegradable active packaging based on cassava bagasse, polyvinyl alcohol and essential oils
Debiagi, F., Kobayashi, R. K. T., Nakazato, G., Panagio, L. A., & Mali, S. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.11.032 · Cited by 144
Biodegradation behavior of PHBV films in a pilot-scale composting condition
Weng, Y., Wang, Y., Wang, X., & Wang, Y. (2010) · Polymer Testing · doi:10.1016/j.polymertesting.2010.04.002 · Cited by 142
Modern Biotechnological Polymer Synthesis: A Review
Dias, M. M. D. S., Reiterer, A., Braunegg, G., Salerno, A., & Koller, M. (2010) · University of Zagreb University Computing Centre (SRCE) · Cited by 140
Srithep, Y., Ellingham, T., Peng, J., Sabo, R. C., Clemons, C. C., Turng, L., & Pilla, S. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.05.006 · Cited by 140
Hu, S. ‐., Jou, C., & Yang, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00079-6 · Cited by 140
NATURAL FIBRE REINFORCED BIODEGRADABLE POLYMER COMPOSITES
Sahari, J., & Sapuan, S. M. (2012) · Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia) · Cited by 140
Yu, H., Qin, Z., Liu, Y.-N., Chen, L., Liu, N., & Zhou, Z. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.04.053 · Cited by 138
Yu, H., Qin, Z., Sun, B., Yang, X., & Yao, J. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.01.018 · Cited by 137
Sultana, N., & Wang, M. (2012) · Biofabrication · doi:10.1088/1758-5082/4/1/015003 · Cited by 137
Duan, B., Cheung, W. L., & Wang, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/1/015001 · Cited by 132
Graphene reinforced biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate) nano-composites
Sridhar, V., Lee, I., Chun, H. H., & Park, H. J. (2013) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2013.29 · Cited by 130
Polymer coatings for biomedical applications: a review
Smith, J. R., & Lamprou, D. A. (2014) · Transactions of the IMF · doi:10.1179/0020296713z.000000000157 · Cited by 128
Removal of Endotoxin during Purification of Poly(3-Hydroxybutyrate) from Gram-Negative Bacteria
Lee, S. Y., Choi, J., Han, K., & Song, J. Y. (1999) · Applied and Environmental Microbiology · doi:10.1128/aem.65.6.2762-2764.1999 · Cited by 126
Berthet, M.-A., Angellier‐Coussy, H., Machado, D., Hilliou, L. H. G., Staebler, A., Vicente, A. A., & Gontard, N. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.01.028 · Cited by 125
Castro-Mayorga, J. L., Fabra, M. J., & Lagaron, J. M. (2015) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2015.10.019 · Cited by 125
Jun, D., Zhao, G., Mingzhu, P., Leilei, Z., Li, D., & Zhang, R. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.03.076 · Cited by 122
Luo, S., & Netravali, A. N. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00383-x · Cited by 119
Production of purified polyhydroxyalkanoates (PHAs) for applications in contact with blood
Sevastianov, V. I., Nv, P., Shishatskaya, E. I., Kalacheva, G. S., & Volova, T. G. (2003) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856203769231547 · Cited by 118
Han, J., Hou, J., Zhang, F., Ai, G., Li, M., Cai, S., Liu, H., Wang, L., Wang, Z., Zhang, S., et al. (2013) · Applied and Environmental Microbiology · doi:10.1128/aem.03915-12 · Cited by 118
Castro-Mayorga, J. L., Fabra, M. J., Cabedo, L., Moragas, G. S., & Lagaron, J. M. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45673 · Cited by 117
Paclitaxel-PHBV nanoparticles and their toxicity to endometrial and primary ovarian cancer cells
Vilos, C., Morales, F. A., Solar, P., Herrera, N., González-Nilo, F. D., Aguayo, D. A., Mendoza, H., Comer, J. R., Bravo, M. L., González, P., et al. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.02.034 · Cited by 116
Ten, E., Bahr, D. F., Li, B., Jiang, L., & Wolcott, M. P. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2023367 · Cited by 116
Aldor, I. S., Kim, S.-W., Prather, K. L. J., & Keasling, J. D. (2002) · Applied and Environmental Microbiology · doi:10.1128/aem.68.8.3848-3854.2002 · Cited by 114
Yu, H., Qin, Z., & Zhou, Z. (2011) · Progress in Natural Science Materials International · doi:10.1016/s1002-0071(12)60086-0 · Cited by 111
Javadi, A., Srithep, Y., Lee, J., Pilla, S., Clemons, C. C., Gong, S., & Turng, L. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.04.002 · Cited by 110
Improvement of cell adhesion on poly(L‐lactide) by atmospheric plasma treatment
Nakagawa, M., Teraoka, F., Fujimoto, S., Hamada, Y., Kibayashi, H., & Takahashi, J. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30521 · Cited by 110
Zhao, S., Zhu, M., Zhang, J., Zhang, Y., Liu, Z., Zhu, Y., & Zhang, C. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00838c · Cited by 108
Biosynthesis and Thermal Properties of PHBV Produced from Levulinic Acid by Ralstonia eutropha
Wang, Y., Chen, R., Cai, J., Liu, Z., Zheng, Y., Wang, H., Li, Q., & He, N. (2013) · PLoS ONE · doi:10.1371/journal.pone.0060318 · Cited by 107
Gas transport properties of starch based films
Dole, P., Joly, C., Espuche, É., Alric, I., & Gontard, N. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.08.002 · Cited by 106
Kennouche, S., Moigne, N. L., Kaci, M., Quantin, J.-C., Caro‐Bretelle, A. S., Delaite, C., & Lopez‐Cuesta, J. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.12.009 · Cited by 101
Han, J., Wu, L., Hou, J., Zhao, D., & Xiang, H. (2015) · Biomacromolecules · doi:10.1021/bm5016267 · Cited by 99
Abdalkarim, S. Y. H., Yu, H.-Y., Wang, D., & Yao, J. (2017) · Cellulose · doi:10.1007/s10570-017-1303-0 · Cited by 96
Electrospun PHBV/PEO co-solution blends: Microstructure, thermal and mechanical properties
Bianco, A., Calderone, M., & Cacciotti, I. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.11.030 · Cited by 94
Shan, G., Gong, X., Chen, W.-P., Chen, L., & Zhu, M. (2011) · Colloid & Polymer Science · doi:10.1007/s00396-011-2412-1 · Cited by 93
Thermal Properties and Biodegradability Studies of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)
Shang, L., Fei, Q., Zhang, Y. H., Wang, X. Z., Fan, D., & Chang, H. N. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0362-9 · Cited by 92
Jost, V. (2015) · Chemical and Biochemical Engineering Quarterly · doi:10.15255/cabeq.2014.2257 · Cited by 91
Sykacek, E., Hrabalova, M., Frech, H., & Mundigler, N. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.05.023 · Cited by 89
Three‐layer sheets based on gelatin and poly(lactic acid), part 1: Preparation and properties
Martucci, J. F., & Ruseckaite, R. A. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32751 · Cited by 89
Requena, R., Jiménez, A., Vargas, M., & Chiralt, A. (2016) · Polymer Testing · doi:10.1016/j.polymertesting.2016.09.022 · Cited by 87
Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-based scaffolds for tissue engineering
Chang, H. M., Wang, Z., Luo, H., Xu, M., Ren, X., Zheng, G., Wu, B., Zhang, X., Lu, X., Chen, F., et al. (2014) · Brazilian Journal of Medical and Biological Research · doi:10.1590/1414-431x20143930 · Cited by 83
Improvement of PHBV Scaffolds with Bioglass for Cartilage Tissue Engineering
Wu, J., Xue, K., Li, H., Sun, J., & Liu, K. (2013) · PLoS ONE · doi:10.1371/journal.pone.0071563 · Cited by 82
Abdalkarim, S. Y. H., Yu, H., Song, M., Zhou, Y., Yao, J., & Ni, Q. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.08.051 · Cited by 80
Biofunctionalization of Polymers and Their Applications
Chen, G. (2010) · Advances in biochemical engineering, biotechnology · doi:10.1007/10_2010_89 · Cited by 78
Modi, S. J., Koelling, K. W., & Vodovotz, Y. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.036 · Cited by 76
Fabra, M. J., López‐Rubio, A., & Lagaron, J. M. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.12.023 · Cited by 74
Fei, B., Chen, C., Chen, S., Peng, S., Zhuang, Y., An, Y., & Dong, L. (2004) · Polymer International · doi:10.1002/pi.1477 · Cited by 73
Han, J., Wu, L., Liu, X., Hou, J., Zhao, L., Chen, J., Zhao, D., & Xiang, H. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.006 · Cited by 70
Increased response of Vero cells to PHBV matrices treated by plasma
Lucchesi, C., Ferreira, B. M. P., Duek, E. A. D. R., Santos, A. R., & Joazeiro, P. P. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-0169-3 · Cited by 67
Mofokeng, J. P., & Luyt, A. S. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-8950-z · Cited by 66
Norrrahim, M. N. F., Ariffin, H., Hassan, M. A., Ibrahim, N. A., & Nishida, H. (2013) · RSC Advances · doi:10.1039/c3ra43632b · Cited by 65
Gürsel, İ., Balçik, C., Arıca, Y., Akkuş, O., Akkaş, N., & Hasırcı, V. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00009-x · Cited by 63
Vidhate, S., Mei, L. H. I., & D’Souza, N. A. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23084 · Cited by 63
Zine, R., & Sinha, M. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.05.138 · Cited by 63
Diego, R. B., Olmedilla, M. P., Serrano‐Aroca, Á., Ribelles, J. L. G., Pradas, M. M., Ferrer, G. G., & Salmerón‐Sánchez, M. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-3885-4 · Cited by 63
Self-citationGogolewski, S., Mainil‐Varlet, P., & Dillon, J. G. (1996) · Journal of Biomedical Materials Research · Cited by 57
Li, W., Zaloga, J., Ding, Y., Liu, Y., Janko, C., Pischetsrieder, M., Alexiou, C., & Boccaccini, A. R. (2016) · Scientific Reports · doi:10.1038/srep23140 · Cited by 57
Castro-Mayorga, J. L., Martínez‐Abad, A., Fabra, M. J., Olivera, C., Reis, M. A. M., & Lagaron, J. M. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.06.059 · Cited by 55
Ke, Y., Wang, Y. J., Ren, L., Zhao, Q., & Huang, W. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.026 · Cited by 54
Unalan, I., Güneş, O. Ç., Albayrak, A. Z., Görgün, C., & Şendemir, A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.07.054 · Cited by 54
Anti-infective biomaterials with surface-decorated tachyplesin I
Xue, Q., Liu, X., Lao, Y., Wu, L., Wang, D., Zuo, Z., Chen, J., Hou, J., Bei, Y.-Y., Wu, X., et al. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.05.008 · Cited by 52
Pramanik, N., De, J., Basu, R. K., Rath, T., & Kundu, P. P. (2016) · RSC Advances · doi:10.1039/c6ra03233h · Cited by 50
Kocić‐Tanackov, S., Dimić, G., Tanackov, I., Pejin, D. J., Mojović, L. V., & Pejin, J. D. (2012) · LWT · doi:10.1016/j.lwt.2012.04.013 · Cited by 49
Ke, Y., Liu, C., Zhang, X., Xiao, M., & Wu, G. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700258 · Cited by 47
Shuai, C., Guo, W., Gao, C., Yang, Y., Xu, Y. B., Liu, L., Tian, Q., Sun, H., Yang, S. L., Feng, P., et al. (2017) · Polymers · doi:10.3390/polym9050175 · Cited by 45
Öner, M., & İlhan, B. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.04.024 · Cited by 44
A new nanofiber fabrication technique based on coaxial electrospinning
Tong, H., Zhang, X., & Wang, M. (2011) · Materials Letters · doi:10.1016/j.matlet.2011.08.095 · Cited by 43
Baek, J.-Y., Xing, Z., Kwak, G., Yoon, K., Park, S., Park, L. S., & Kang, I. (2012) · Journal of Nanomaterials · doi:10.1155/2012/171804 · Cited by 42
Fabrication and characterization of bioactive β-Ca2SiO4/PHBV composite scaffolds
Wang, N., Zhou, Z. Y., Xia, L., Dai, Y., & Liu, H. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.01.059 · Cited by 42
Requena, R., Jiménez, A., Vargas, M., & Chiralt, A. (2016) · Polymer International · doi:10.1002/pi.5091 · Cited by 40
Three‐dimensional nanocomposite scaffolds with ordered cylindrical orthogonal pores
Hernández, J. C. R., Serrano‐Aroca, Á., Ribelles, J. L. G., & Pradas, M. M. (2007) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30902 · Cited by 39
Self-citationSolar, P., González, G., Vilos, C., Herrera, N., Juica, N., Moreno, M., Simón, F., & Velásquez, L. (2015) · Journal of Nanobiotechnology · doi:10.1186/s12951-015-0077-5 · Cited by 39
Bittmann, B., Bouza, R., Barral, L., Diez, J., & Ramírez, C. (2013) · Polymer Composites · doi:10.1002/pc.22510 · Cited by 38
Effect of60Co ?-radiation on the properties of poly(hydroxybutyrate-co-hydroxyvalerate)
Luo, S., & Netravali, A. N. (1999) · Journal of Applied Polymer Science · Cited by 36
Hassaini, L., Kaci, M., Benhamida, A., Bruzaud, S., Pillin, I., & Grohens, Y. (2016) · Journal of Adhesion Science and Technology · doi:10.1080/01694243.2016.1168961 · Cited by 33
Modi, S. J., Cornish, K., Koelling, K. W., & Vodovotz, Y. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43937 · Cited by 32
Chang, C.-K., Wang, H.-M., & Lan, J. C. (2018) · Polymers · doi:10.3390/polym10040355 · Cited by 31
Cho, Y. S., Hong, M. W., Kim, S.-Y., Lee, S., Lee, J. H., Kim, Y., & Cho, Y.-S. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.10.009 · Cited by 30
Asencio, Í. O., Dew, L., Kelly, A. G., Chong, C. K., MacNeil, S., & Claeyssens, F. (2015) · Biomaterials Science · doi:10.1039/c4bm00418c · Cited by 29
Blending Modification of PHBV/PCL and its Biodegradation by Pseudomonas mendocina
Liu, H., Gao, Z., Hu, X., Wang, Z., Su, T., Yang, L., & Yan, S. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0795-2 · Cited by 28
Zembouai, I., Kaci, M., Bruzaud, S., Dumazert, L., Bourmaud, A., Mahlous, M., Lopez‐Cuesta, J., & Grohens, Y. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.11.003 · Cited by 25
Wang, L., Du, J., Cao, D., & Wang, Y. (2013) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2013.802540 · Cited by 23
Öner, M., Keskin, G., Kızıl, G., Pochat‐Bohatier, C., & Bechelany, M. (2017) · Polymer Composites · doi:10.1002/pc.24603 · Cited by 23
Braga, N. F., da Silva, A. P., Arantes, T. M., Lemes, A. P., & Cristovan, F. H. (2017) · Materials Research Express · doi:10.1088/2053-1591/aa9f7a · Cited by 23
García-García, J. M., Quijada‐Garrido, I., López‐Gómez, L., París, R., Núñez‐López, M. T., Zarzuelo, E. D. L. P., & Garrido, L. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.08.052 · Cited by 20
Rao, U., Kumar, R., Balaji, S., & Sehgal, P. K. (2010) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911510369037 · Cited by 19
Surface Modification of PHBV Scaffolds via UV Polymerization to Improve Hydrophilicity
Ke, Y., Wang, Y., & Ren, L. (2010) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/092050609x12520505439788 · Cited by 17
Recco, M. S., Floriano, A. C., Tada, D. B., Lemes, A. P., Lang, R., & Cristovan, F. H. (2016) · RSC Advances · doi:10.1039/c5ra26747a · Cited by 16
Modeling of molar mass distribution of poly( D ‐(–)‐3‐hydroxybutyrate) during bacterial synthesis
Bradel, R., & Reichert, K. (1993) · Die Makromolekulare Chemie · doi:10.1002/macp.1993.021940712 · Cited by 15
Johari, N. S. C., Aizad, S., & Zubairi, S. I. (2017) · International Journal of Polymer Science · doi:10.1155/2017/5029194 · Cited by 14
Liu, X., Wu, L., Hou, J., Chen, J., Han, J., & Xiang, H. (2016) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-016-7528-2 · Cited by 10
Smart Nanomaterials**By Yaser Dahman, Adil Kamil, and Daniel Baena.
Dahman, Y. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-51256-5.00003-4 · Cited by 10
Krikštanavičienė, K., Stanys, S., & Jonaitienė, V. (2014) · Autex Research Journal · doi:10.2478/aut-2014-0001 · Cited by 7
Cited by
Naser, A. Z., Deiab, I., & Darras, B. M. (2021) · RSC Advances · doi:10.1039/d1ra02390j · Cited by 836
Zhou, J., Gui, H., Banfield, C. C., Wen, Y., Zang, H., Dippold, M. A., Charlton, A., & Jones, D. L. (2021) · Soil Biology and Biochemistry · doi:10.1016/j.soilbio.2021.108211 · Cited by 630
Fused deposition modelling: Current status, methodology, applications and future prospects
Cano-Vicent, A., Tambuwala, M. M., Hassan, S. S., Barh, D., Aljabali, A. A. A., Birkett, M., Arjunan, A., & Serrano-Aroca, Á. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102378 · Cited by 509
Self-citationNarrowing the Gap for Bioplastic Use in Food Packaging: An Update
Zhao, X., Cornish, K., & Vodovotz, Y. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.9b03755 · Cited by 423
Udayakumar, G. P., Muthusamy, S., Selvaganesh, B., Sivarajasekar, N., Rambabu, K., Banat, F., Sivamani, S., Sivakumar, N., Hosseini-Bandegharaei, A., & Show, P. L. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105322 · Cited by 347
Metadata
- Authors
- Rivera-Briso, A. L., & Serrano-Aroca, Á.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2018-07-03
- Volume
- 10
- Issue
- 7
- Pages
- 732
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2811194914
- Cited by
- 332
- References
- 159
- FWCI
- 7.91
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.