The DOI matches its Crossref record; 100 of the 100 references it cites were found in a registry or an index.
A Comprehensive Review on Advanced Sustainable Woven Natural Fibre Polymer Composites
Open accessAbstract
Over the last decade, the progressive application of natural fibres in polymer composites has had a major effect in alleviating environmental impacts. Recently, there is a growing interest in the development of green materials in a woven form by utilising natural fibres from lignocellulosic materials for many applications such as structural, non-structural composites, household utilities, automobile parts, aerospace components, flooring, and ballistic materials. Woven materials are one of the most promising materials for substituting or hybridising with synthetic polymeric materials in the production of natural fibre polymer composites (NFPCs). These woven materials are flexible, able to be tailored to the specific needs and have better mechanical properties due to their weaving structures. Seeing that the potential advantages of woven materials in the fabrication of NFPC, this paper presents a detailed review of studies related to woven materials. A variety of factors that influence the properties of the resultant woven NFRC such as yarn characteristics, fabric properties as well as manufacturing parameters were discussed. Past and current research efforts on the development of woven NFPCs from various polymer matrices including polypropylene, polylactic acid, epoxy and polyester and the properties of the resultant composites were also compiled. Last but not least, the applications, challenges, and prospects in the field also were highlighted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
The elasticity and strength of paper and other fibrous materials
Cox, H. L. (1952) · British Journal of Applied Physics · doi:10.1088/0508-3443/3/3/302 · Cited by 3,586
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Physical properties of textile fibres
Morton, W. E., & Hearle, J. W. S. (2008) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845694425 · Cited by 1,530
Biodegradable composites based on lignocellulosic fibers—An overview
Satyanarayana, K. G., Arizaga, G. G. C., & Wypych, F. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.002 · Cited by 1,421
Thyavihalli Girijappa, Y. G., Mavinkere Rangappa, S., Parameswaranpillai, J., & Siengchin, S. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00226 · Cited by 1,011
M.R., S., Siengchin, S., Parameswaranpillai, J., Jawaid, M., Pruncu, C. I., & Khan, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.083 · Cited by 999
Dynamic mechanical analysis of banana fiber reinforced polyester composites
Pothan, L. A., Oommen, Z., & Thomas, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00254-3 · Cited by 925
Mechanical properties of kenaf fibers and kenaf/PLA composites
Ochi, S. (2008) · Mechanics of Materials · doi:10.1016/j.mechmat.2007.10.006 · Cited by 708
A review of bast fibres and their composites. Part 1 – Fibres as reinforcements
Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.06.001 · Cited by 683
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)
Ilyas, R. A., Sapuan, S. M., & Ishak, M. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.045 · Cited by 568
Self-citationIdicula, M., Malhotra, S. K., Joseph, K., & Thomas, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.10.023 · Cited by 530
Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites
Sepe, R., Bollino, F., Boccarusso, L., & Caputo, F. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.09.030 · Cited by 508
Alavudeen, A., Rajini, N., Karthikeyan, S., Thiruchitrambalam, M., & Venkateshwaren, N. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.10.067 · Cited by 493
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.002 · Cited by 448
Self-citationMicro- and Nanocellulose in Polymer Composite Materials: A Review
Omran, A. A. B., Mohammed, A. A. B. A., Sapuan, S. M., Ilyas, R. A., Asyraf, M. R. M., Rahimian Koloor, S. S., & Petrů, M. (2021) · Polymers · doi:10.3390/polym13020231 · Cited by 398
Self-citationEffect of fiber treatment on flexural properties of natural fiber reinforced composites: A review
Sood, M., & Dwivedi, G. (2018) · Egyptian Journal of Petroleum · doi:10.1016/j.ejpe.2017.11.005 · Cited by 384
Mechanical properties of woven banana fibre reinforced epoxy composites
Sapuan, S. M., Leenie, A., Harimi, M., & Beng, Y. K. (2006) · Materials & Design · doi:10.1016/j.matdes.2004.12.016 · Cited by 377
Self-citationImpact and delamination failure of woven-fabric composites
Kim, J.-K., & Sham, M.-L. (2000) · Composites Science and Technology · doi:10.1016/s0266-3538(99)00166-9 · Cited by 360
Comparative Evaluation on Properties of Hybrid Glass Fiber- Sisal/Jute Reinforced Epoxy Composites
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.01.106 · Cited by 310
Nazrin, A., Sapuan, S. M., Zuhri, M. Y. M., Ilyas, R. A., Syafiq, R., & Sherwani, S. F. K. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00213 · Cited by 294
Self-citationTransparent and antimicrobial cellulose film from ginger nanofiber
Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Pratama, A. B., Fajri, N., Sapuan, S. M., & Ilyas, R. A. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.105266 · Cited by 290
Self-citationWhy are designers fascinated by flax and hemp fibre composites?
Pil, L., Bensadoun, F., Pariset, J., & Verpoest, I. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.11.004 · Cited by 282
Evaluation of mechanical and thermal properties of banana–flax based natural fibre composite
Srinivasan, V., Boopathy, S. R., N, S. D., & Ramnath, B. V. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.03.014 · Cited by 280
A review of 3D and 4D printing of natural fibre biocomposites
Le Duigou, A., Correa, D., Ueda, M., Matsuzaki, R., & Castro, M. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108911 · Cited by 280
Abdul Khalil, H. P. S., Yusra, A. F. I., Bhat, A. H., & Jawaid, M. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2009.09.008 · Cited by 269
Ilyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.124 · Cited by 257
Self-citationIlyas, R. A., Sapuan, S. M., Sanyang, M. L., Ishak, M. R., & Zainudin, E. S. (2018) · Current Analytical Chemistry · doi:10.2174/1573411013666171003155624 · Cited by 253
Self-citationIlyas, R. A., Sapuan, S. M., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Atikah, M. S. N., Mohd Nurazzi, N., Atiqah, A., Ansari, M. N. M., et al. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.08.028 · Cited by 250
Self-citationStudies on the Water Absorption Properties of Short Hemp—Glass Fiber Hybrid Polypropylene Composites
Panthapulakkal, S., & Sain, M. (2007) · Journal of Composite Materials · doi:10.1177/0021998307069900 · Cited by 244
Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Asrofi, M., Atikah, M. S. N., Huzaifah, M. R. M., Radzi, A. M., et al. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.04.011 · Cited by 240
Self-citationIlyas, R. A., Sapuan, S. M., Ishak, M. R., & Zainudin, E. S. (2017) · BioResources · doi:10.15376/biores.12.4.8734-8754 · Cited by 218
Self-citationSanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.037 · Cited by 217
Self-citationThe fracture behaviour and toughness of woven flax fibre reinforced epoxy composites
Liu, Q., & Hughes, M. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.07.008 · Cited by 209
Effect of ultrasonication duration of polyvinyl alcohol (PVA) gel on characterizations of PVA film
Abral, H., Atmajaya, A., Mahardika, M., Hafizulhaq, F., Kadriadi, Handayani, D., Sapuan, S. M., & Ilyas, R. A. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.12.078 · Cited by 209
Self-citationThe response of natural fibre composites to ballistic impact by fragment simulating projectiles
Wambua, P., Vangrimde, B., Lomov, S., & Verpoest, I. (2007) · Composite Structures · doi:10.1016/j.compstruct.2005.07.006 · Cited by 200
Syafiq, R., Sapuan, S. M., Zuhri, M. Y. M., Ilyas, R. A., Nazrin, A., Sherwani, S. F. K., & Khalina, A. (2020) · Polymers · doi:10.3390/polym12102403 · Cited by 199
Self-citationEdhirej, A., Sapuan, S. M., Jawaid, M., & Zahari, N. I. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.03.045 · Cited by 193
Self-citationIlyas, R., Sapuan, S., Atikah, M., Asyraf, M., Rafiqah, S. A., Aisyah, H., Nurazzi, N. M., & Norrrahim, M. (2021) · Textile Research Journal · doi:10.1177/0040517520932393 · Cited by 183
Self-citationSanjay, M. R., Arpitha, G. R., Senthamaraikannan, P., Kathiresan, M., Saibalaji, M. A., & Yogesha, B. (2019) · Journal of Natural Fibers · doi:10.1080/15440478.2018.1431828 · Cited by 175
Syafri, E., Sudirman, Mashadi, Yulianti, E., Deswita, Asrofi, M., Abral, H., Sapuan, S. M., Ilyas, R. A., & Fudholi, A. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.10.016 · Cited by 175
Self-citationIlyas, R. A., Sapuan, S. M., Atiqah, A., Ibrahim, R., Abral, H., Ishak, M. R., Zainudin, E. S., Nurazzi, N. M., Atikah, M. S. N., Ansari, M. N. M., et al. (2020) · Polymer Composites · doi:10.1002/pc.25379 · Cited by 172
Self-citationSapuan, S. M., Aulia, H. S., Ilyas, R. A., Atiqah, A., Dele-Afolabi, T. T., Nurazzi, M. N., Supian, A. B. M., & Atikah, M. S. N. (2020) · Polymers · doi:10.3390/polym12102211 · Cited by 172
Self-citationLee, C. H., Khalina, A., Lee, S. H., & Liu, M. (2020) · Advances in Materials Science and Engineering · doi:10.1155/2020/6074063 · Cited by 168
Self-citationSugar Palm Starch-Based Composites for Packaging Applications
Sanyang, M. L., Ilyas, R. A., Sapuan, S. M., & Jumaidin, R. (2017) · Springer eBooks · doi:10.1007/978-3-319-67319-6_7 · Cited by 167
Self-citationEnzymatic Deconstruction of Sugarcane Bagasse and Straw to Obtain Cellulose Nanomaterials
de Aguiar, J., Bondancia, T. J., Claro, P. I. C., Mattoso, L. H. C., Farinas, C. S., & Marconcini, J. M. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06806 · Cited by 162
Studies on the mechanical properties of woven jute fabric reinforced poly(l-lactic acid) composites
Khan, G. M. A., Terano, M., Gafur, M. A., & Alam, M. S. (2013) · Journal of King Saud University - Engineering Sciences · doi:10.1016/j.jksues.2013.12.002 · Cited by 161
Highly transparent and antimicrobial PVA based bionanocomposites reinforced by ginger nanofiber
Abral, H., Ariksa, J., Mahardika, M., Handayani, D., Aminah, I., Sandrawati, N., Sapuan, S. M., & Ilyas, R. A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106186 · Cited by 160
Self-citationThermal Properties of Woven Kenaf/Carbon Fibre-Reinforced Epoxy Hybrid Composite Panels
Aisyah, H. A., Tahir, P. M., Sapuan, S. M., Abdan, K., Berkalp, Ö. B., Lee, S. H., Lee, C. H., Norizan, M. N., Ramli, N., Wahab, M. S., et al. (2019) · International Journal of Polymer Science · doi:10.1155/2019/5258621 · Cited by 153
Self-citationBallistic Test of Multilayered Armor with Intermediate Epoxy Composite Reinforced with Jute Fabric
da Luz, F. S., Júnior, É. P. L., Louro, L. H. L., & Monteiro, S. N. (2015) · Materials Research · doi:10.1590/1516-1439.358914 · Cited by 146
Life cycle assessment of a novel hybrid glass-hemp/thermoset composite
Rosa, A. D. L., Cozzo, G., Latteri, A., Recca, A., Björklund, A., Parrinello, E., & Cicala, G. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.11.038 · Cited by 138
Asyraf, M. R. M., Ishak, M. R., Sapuan, S. M., Yidris, N., Ilyas, R. A., Rafidah, M., & Razman, M. R. (2020) · International Journal of Polymer Science · doi:10.1155/2020/8878300 · Cited by 131
Self-citationBiopolymers and Biocomposites: Chemistry and Technology
Ilyas, R. A., & Sapuan, S. M. (2020) · Current Analytical Chemistry · doi:10.2174/157341101605200603095311 · Cited by 129
Self-citationViscoelastic and thermal behavior of woven hemp fiber reinforced poly(lactic acid) composites
Song, Y. S., Lee, J. T., Ji, D. S., Kim, M. W., Lee, S. H., & Youn, J. R. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.10.021 · Cited by 128
Self-citationKalagi, G., Patil, R. K., & Nayak, N. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.11.043 · Cited by 126
Azammi, A. M. N., Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Atikah, M. S. N., Asrofi, M., & Atiqah, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-08-102665-6.00003-0 · Cited by 124
Self-citationHaghighatnia, T., Abbasian, A., & Morshedian, J. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.07.020 · Cited by 123
Sabaruddin, F. A., Paridah, M. T., Sapuan, S. M., Ilyas, R. A., Lee, S. H., Abdan, K., Mazlan, N., Roseley, A. S. M., & Khalil, H. P. S. A. (2020) · Polymers · doi:10.3390/polym13010116 · Cited by 122
Self-citationSari, N. H., Pruncu, C. I., Sapuan, S. M., Ilyas, R. A., Catur, A. D., Suteja, S., Sutaryono, Y. A., & Pullen, G. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106751 · Cited by 119
Self-citationAbdellaoui, H., Bensalah, H., Echaabi, J., Bouhfid, R., & Qaiss, A. E. K. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.11.059 · Cited by 118
Chung, T., Park, J., Lee, H., Kwon, H.-J., Kim, H., Lee, Y., & Tze, W. T. Y. (2018) · Applied Sciences · doi:10.3390/app8030376 · Cited by 117
Rafiqah, S. A., Abdan, K., Harmaen, A. S., Zaman, K., Tawakkal, I., Liu, Q., Ilyas, R. A., & Lee, C. H. (2020) · Polymers · doi:10.3390/polym12071571 · Cited by 117
Self-citationAsrofi, M., Sapuan, S. M., Ilyas, R. A., & Ramesh, M. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.07.254 · Cited by 115
Self-citationAsyraf, M. R. M., Rafidah, M., Ishak, M. R., Sapuan, S. M., Yidris, N., Ilyas, R. A., & Razman, M. R. (2020) · Polymer Composites · doi:10.1002/pc.25587 · Cited by 109
Self-citationCalabrese, L., Fiore, V., Scalici, T., & Valenza, A. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47203 · Cited by 106
Universiti Putra Malaysia, M., Norizan, M. N., Abdan, K., Universiti Putra Malaysia, M., Sapuan, S. M., Universiti Putra Malaysia, M., Mohamed, R., & Universiti Teknologi MARA, M. (2017) · Journal of Physical Science · doi:10.21315/jps2017.28.3.8 · Cited by 104
Self-citationMorye, S. S., & Wool, R. P. (2005) · Polymer Composites · doi:10.1002/pc.20099 · Cited by 99
Ahmed, K., Vijayarangan, S., & Chhaya, R. (2006) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684406066747 · Cited by 99
Damage investigation and assessment due to low-velocity impact on flax/glass hybrid composite plates
Barouni, A. K., & Dhakal, H. N. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.111224 · Cited by 91
Kandola, B. K., Mistik, S. I., Pornwannachai, W., & Anand, S. C. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.09.013 · Cited by 90
Saidane, E. H., Scida, D., Pac, M.-J., et al. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.02.022 · Cited by 88
Effect of twist on the electromechanical properties of carbon nanotube yarns
Anike, J. C., Belay, K., & Abot, J. L. (2018) · Carbon · doi:10.1016/j.carbon.2018.10.067 · Cited by 85
Jute and glass fibre hybrid laminates
Clark, R. A., & Ansell, M. P. (1986) · Journal of Materials Science · doi:10.1007/bf01144731 · Cited by 82
Salman, S. D., Sharba, M. J., Leman, Z., Sultan, M. T. H., Ishak, M. R., & Cardona, F. (2015) · International Journal of Polymer Science · doi:10.1155/2015/894565 · Cited by 82
de Vasconcellos, D. S., Fabrizio Sarasini, A., Touchard, F., Chocinski‐Arnault, L., Pucci, M. F., Santulli, C., Tirillò, J., Iannace, S., & Sorrentino, L. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.04.025 · Cited by 76
Biodegradability studies on natural fibers reinforced polypropylene composites
Chattopadhyay, S. K., Singh, S., Pramanik, N. K., Niyogi, U. K., Khandal, R. K., Uppaluri, R. V. S., & Ghoshal, A. K. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33828 · Cited by 74
Aisyah, H. A., Tahir, P. M., Abdan, K., Sapuan, S. M., Wahab, M. S., Berkalp, Ö. B., Lee, C. H., & Lee, S. H. (2018) · Polymers · doi:10.3390/polym10121320 · Cited by 72
Self-citationA Review of the Flammability Factors of Kenaf and Allied Fibre Reinforced Polymer Composites
Lee, C. H., Sapuan, S. M., & Hassan, M. R. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/514036 · Cited by 71
Self-citationKhoshnava, S. M., Rostami, R., Ismail, M., Rahmat, A. R., & Ogunbode, E. B. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.189 · Cited by 70
Yallew, T. B., Kassegn, E., Aregawi, S., & Gerezgiher, A. G. (2020) · SN Applied Sciences · doi:10.1007/s42452-020-2101-0 · Cited by 68
Production, Processes and Modification of Nanocrystalline Cellulose from Agro-Waste: A Review
Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Atikah, M. S. N., Atiqah, A., Ansari, M. N. M., & Norrrahim, M. N. F. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.87001 · Cited by 66
Self-citationEffect of variety, seed rate and time of cutting on fibre yield of dew-retted hemp
Bennett, S. J., Snell, R., & Wright, D. (2006) · Industrial Crops and Products · doi:10.1016/j.indcrop.2006.03.007 · Cited by 63
Awais, H., Nawab, Y., Amjad, A., Anjang, A., Akil, H. M., & Abidin, M. J. Z. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107279 · Cited by 61
Monteiro, S. N., Drelich, J. W., Colorado, H. A., Nascimento, L. F. C., da Luz, F. S., da Silva, L. C., dos Santos, J. L., Filho, F. D. C. G., de Assis, F. S., Júnior, É. P. L., et al. (2019) · The minerals, metals & materials series · doi:10.1007/978-3-030-10383-5_4 · Cited by 56
Shah, D. U., Schubel, P. J., Licence, P., & Clifford, M. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-6096-1 · Cited by 55
Interfacial Characteristics of Sisal Fiber and Polymeric Matrices
Li, Y., & Mai, Y. (2006) · The Journal of Adhesion · doi:10.1080/00218460600713840 · Cited by 54
Natural fibre composites (NFCs) for construction and automotive industries
Kim, Y. K., & Chalivendra, V. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818782-1.00014-6 · Cited by 54
Baihaqi, N. M. Z. N., Khalina, A., Norizan, M. N., Aisyah, H. A., Sapuan, S. M., & Ilyas, R. A. (2021) · Polimery · doi:10.14314/polimery.2021.1.5 · Cited by 53
Self-citationAsrofi, M., Sujito, S., Syafri, E., Sapuan, S. M., & Ilyas, R. A. (2020) · Key engineering materials · doi:10.4028/www.scientific.net/kem.849.96 · Cited by 51
Self-citationPolymers to improve the world and lifestyle: physical, mechanical, and chemical needs
Al‐Maadeed, M. A. A., Ponnamma, D., & El-Samak, A. A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816808-0.00001-9 · Cited by 50
Hazrol, M. D., Sapuan, S. M., Ilyas, R. A., Othman, M. L., & Sherwani, S. F. K. (2020) · Polimery · doi:10.14314/polimery.2020.5.4 · Cited by 47
Self-citationInterfacial Characterization by Pull-Out Test of Bamboo Fibers Embedded in Poly(Lactic Acid)
Viel, Q., Esposito, A., Saiter, J., Santulli, C., & Turner, J. A. (2018) · Fibers · doi:10.3390/fib6010007 · Cited by 45
Lee, C. H., Sapuan, S. M., & Hassan, M. R. (2017) · Journal of Engineered Fibers and Fabrics · doi:10.1177/155892501701200206 · Cited by 44
Self-citationZin, M. H., Abdan, K., Norizan, M. N., & Mazlan, N. (2018) · Universiti Putra Malaysia Institutional Repository (Universiti Putra Malaysia) · Cited by 28
Yusof, N. S. B., Sapuan, S. M., Sultan, M. T. H., et al. (2020) · Journal of Central South University · doi:10.1007/s11771-020-4278-1 · Cited by 26
Self-citationFormability Analysis of Bamboo Fabric Reinforced Poly (Lactic) Acid Composites
Rawi, N. F. M., Jayaraman, K., & Bhattacharyya, D. (2016) · Materials · doi:10.3390/ma9070539 · Cited by 23
Furfural production from oil palm frond (OPF) under subcritical ethanol conditions
Mohamad, N., Abd-Talib, N., & Len, K. Y. T. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.01.256 · Cited by 18
Norizan, M. N., Abdan, K., Sapuan, S. M., & Mohamed, R. (2018) · Sains Malaysiana · doi:10.17576/jsm-2018-4704-07 · Cited by 17
Self-citationMechanical performance of flax-based biocomposites
Bourmaud, A., Duigou, A. L., & Baley, C. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-373-7.00013-5 · Cited by 14
Cited by
Sustainable Fiber‐Reinforced Composites: A Review
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200258 · Cited by 493
Ilyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
Self-citationLignocellulosic Agricultural Waste Valorization to Obtain Valuable Products: An Overview
Blasi, A., Verardi, A., Lopresto, C. G., Siciliano, S., & Sangiorgio, P. (2023) · Recycling · doi:10.3390/recycling8040061 · Cited by 338
Suriani, M. J., Ilyas, R. A., Zuhri, M. Y. M., Khalina, A., Sultan, M. T. H., Sapuan, S. M., Ruzaidi, C. M., Wan, F. N., Zulkifli, F., Harussani, M. M., et al. (2021) · Polymers · doi:10.3390/polym13203514 · Cited by 285
Self-citationIlyas, R., Aisyah, H., Nordin, A., Ngadi, N., Zuhri, M., Asyraf, M., Sapuan, S., Zainudin, E., Sharma, S., Abral, H., et al. (2022) · Polymers · doi:10.3390/polym14050874 · Cited by 258
Self-citation
Metadata
- Authors
- Aisyah, H. A., Paridah, M. T., Sapuan, S. M., Ilyas, R. A., Khalina, A., Nurazzi, N. M., Lee, S. H., & Lee, C. H.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-02-02
- Volume
- 13
- Issue
- 3
- Pages
- 471
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3127977141
- Cited by
- 263
- References
- 100
- FWCI
- 15.52
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.