The DOI matches its Crossref record; 170 of the 170 references it cites were found in a registry or an index.
Advantages and Disadvantages of Bioplastics Production from Starch and Lignocellulosic Components
Open accessAbstract
The accumulation of plastic wastes in different environments has become a topic of major concern over the past decades; therefore, technologies and strategies aimed at mitigating the environmental impacts of petroleum products have gained worldwide relevance. In this scenario, the production of bioplastics mainly from polysaccharides such as starch is a growing strategy and a field of intense research. The use of plasticizers, the preparation of blends, and the reinforcement of bioplastics with lignocellulosic components have shown promising and environmentally safe alternatives for overcoming the limitations of bioplastics, mainly due to the availability, biodegradability, and biocompatibility of such resources. This review addresses the production of bioplastics composed of polysaccharides from plant biomass and its advantages and disadvantages.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Cellulose: Fascinating Biopolymer and Sustainable Raw Material
Klemm, D., Heublein, B., Fink, H., & Bohn, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200460587 · Cited by 7,551
What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050
Kaza, S., Yao, L. C., Bhada-Tata, P., Van Woerden, F., & Levine, D. (2018) · doi:10.1596/978-1-4648-1329-0 · Cited by 6,126
Production of first and second generation biofuels: A comprehensive review
Naik, S. N., Goud, V. V., Rout, P. K., & Dalai, A. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.003 · Cited by 3,264
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
Wood: Chemistry, ultrastructure, reactions
(1983) · doi:10.1515/9783110839654 · Cited by 2,846
Climate Change 2014 : Synthesis Report
Pachauri, R. K., Allen, M. R. (. D. )., & Minx, J. C. (. D. ). (2015) · OPUS 4 (Zuse Institute Berlin) · Cited by 2,322
Morphological, thermal and rheological properties of starches from different botanical sources
Singh, N., Singh, J., Kaur, L., Singh Sodhi, N., & Singh Gill, B. (2003) · Food Chemistry · doi:10.1016/s0308-8146(02)00416-8 · Cited by 1,929
Zhang, Y. P., & Lynd, L. R. (2004) · Biotechnology and Bioengineering · doi:10.1002/bit.20282 · Cited by 1,893
Plastic waste in the marine environment: A review of sources, occurrence and effects
LI, W. C., TSE, H. F., & FOK, L. (2016) · Science of The Total Environment · doi:10.1016/j.scitotenv.2016.05.084 · Cited by 1,769
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
Progress in Green Polymer Composites from Lignin for Multifunctional Applications: A Review
Thakur, V. K., Thakur, M. K., Raghavan, P., & Kessler, M. R. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500087z · Cited by 1,398
Biodegradable films and composite coatings: past, present and future
Tharanathan, R. N. (2003) · Trends in Food Science & Technology · doi:10.1016/s0924-2244(02)00280-7 · Cited by 1,243
Galanakis, C. M. (2012) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2012.03.003 · Cited by 1,240
Recent progress in cellulose nanocrystals: sources and production
Trache, D., Hussin, M. H., Haafiz, M. K. M., & Thakur, V. K. (2017) · Nanoscale · doi:10.1039/c6nr09494e · Cited by 1,064
Form and functionality of starch
Copeland, L., Blazek, J., Salman, H., & Tang, M. C. (2009) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2008.09.016 · Cited by 974
Edible films and coatings: Structures, active functions and trends in their use
Falguera, V., Quintero, J. P., Jiménez, A., Muñoz, J. A., & Ibarz, A. (2011) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2011.02.004 · Cited by 939
Application of microbial α-amylase in industry - A review
Souza, P. M. D., & Magalhães, P. D. O. E. (2010) · Brazilian Journal of Microbiology · doi:10.1590/s1517-83822010000400004 · Cited by 893
GONTARD, N., GUILBERT, S., & CUQ, J. (1993) · Journal of Food Science · doi:10.1111/j.1365-2621.1993.tb03246.x · Cited by 890
Agro-industrial lignocellulosic biomass a key to unlock the future bio-energy: A brief review
Anwar, Z., Gulfraz, M., & Irshad, M. (2014) · Journal of Radiation Research and Applied Sciences · doi:10.1016/j.jrras.2014.02.003 · Cited by 849
Biodegradable Multiphase Systems Based on Plasticized Starch: A Review
Avérous, L. (2004) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-200029326 · Cited by 834
Thermal processing of starch-based polymers
Liu, H., Xie, F., Yu, L., Chen, L., & Li, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.07.001 · Cited by 817
Microcrystalline cellulose: Isolation, characterization and bio-composites application—A review
Trache, D., Hussin, M. H., Hui Chuin, C. T., Sabar, S., Fazita, M. R. N., Taiwo, O. F. A., Hassan, T. M., & Haafiz, M. K. M. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.09.056 · Cited by 814
Lindeboom, N., Chang, P. R., & Tyler, R. T. (2004) · Starch - Stärke · doi:10.1002/star.200300218 · Cited by 763
Review of the recent developments in cellulose nanocomposite processing
Oksman, K., Aitomäki, Y., Mathew, A. P., Siqueira, G., Zhou, Q., Butylina, S., Tanpichai, S., Zhou, X., & Hooshmand, S. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.041 · Cited by 712
Nanoscale particles for polymer degradation and stabilization—Trends and future perspectives
Kumar, A. P., Depan, D., Singh Tomer, N., & Singh, R. P. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.002 · Cited by 680
Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis
Anglès, M. N., & Dufresne, A. (2000) · Macromolecules · doi:10.1021/ma0008701 · Cited by 667
Food waste-to-energy conversion technologies: Current status and future directions
Pham, T. P. T., Kaushik, R., Parshetti, G. K., Mahmood, R., & Balasubramanian, R. (2015) · Waste Management · doi:10.1016/j.wasman.2014.12.004 · Cited by 664
Mechanical, water vapor barrier and thermal properties of gelatin based edible films
Sobral, P. J. A., Menegalli, F. C., Hubinger, M. D., & Roques, M. A. (2001) · Food Hydrocolloids · doi:10.1016/s0268-005x(01)00061-3 · Cited by 630
Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites
Majeed, K., Jawaid, M., Hassan, A., Abu Bakar, A., Abdul Khalil, H. P. S., Salema, A. A., & Inuwa, I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.10.044 · Cited by 617
Application of bioplastics for food packaging
Peelman, N., Ragaert, P., De Meulenaer, B., Adons, D., Peeters, R., Cardon, L., Van Impe, F., & Devlieghere, F. (2013) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2013.06.003 · Cited by 615
Starch-based nano-biocomposites
Xie, F., Pollet, E., Halley, P. J., & Avérous, L. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.002 · Cited by 550
Self-citationSanyang, M., Sapuan, S., Jawaid, M., Ishak, M., & Sahari, J. (2015) · Polymers · doi:10.3390/polym7061106 · Cited by 509
Kaushik, A., Singh, M., & Verma, G. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.04.063 · Cited by 508
Water vapor permeability of edible starch based films
Bertuzzi, M. A., Castro Vidaurre, E. F., Armada, M., & Gottifredi, J. C. (2007) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2006.07.016 · Cited by 508
Review article: The alkali treatment of straws
Jackson, M. G. (1977) · Animal Feed Science and Technology · doi:10.1016/0377-8401(77)90013-x · Cited by 506
Ghanbarzadeh, B., Almasi, H., & Entezami, A. A. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.10.016 · Cited by 483
Applications of Lignocellulosic Fibers and Lignin in Bioplastics: A Review
Yang, J., Ching, Y., & Chuah, C. (2019) · Polymers · doi:10.3390/polym11050751 · Cited by 438
Technology and applications of edible protective films
Guilbert, S., Gontard, N., & Cuq, B. (1995) · Packaging Technology and Science · doi:10.1002/pts.2770080607 · Cited by 406
Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Journal of Food Science and Technology · doi:10.1007/s13197-015-2009-7 · Cited by 399
Morphological investigation of nanocomposites from sorbitol plasticized starch and tunicin whiskers
Mathew, A. P., & Dufresne, A. (2002) · Biomacromolecules · doi:10.1021/bm0101769 · Cited by 384
Chen, Y., Liu, C., Chang, P. R., Cao, X., & Anderson, D. P. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.11.030 · Cited by 384
Mathew, A. P., Oksman, K., & Sain, M. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23346 · Cited by 363
Thermoplastic Starch: A Possible Biodegradable Food Packaging Material—A Review
Khan, B., Bilal Khan Niazi, M., Samin, G., & Jahan, Z. (2017) · Journal of Food Process Engineering · doi:10.1111/jfpe.12447 · Cited by 358
Barrier, mechanical and optical properties of plasticized yam starch films
Mali, S., Grossmann, M. V. E., Garcı́a, M. A., Martino, M. N., & Zaritzky, N. E. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.01.004 · Cited by 342
Comparison of the aerobic biodegradation of biopolymers and the corresponding bioplastics: A review
Polman, E. M. N., Gruter, G.-J. M., Parsons, J. R., & Tietema, A. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141953 · Cited by 337
Wan, Y. Z., Luo, H., He, F., Liang, H., Huang, Y., & Li, X. L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.024 · Cited by 329
Müller, C. M. O., Laurindo, J. B., & Yamashita, F. (2009) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2008.09.002 · Cited by 328
Lu, Y., Weng, L., & Cao, X. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.08.027 · Cited by 312
Cuq, B., Gontard, N., Cuq, J.-L., & Guilbert, S. (1997) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf960352i · Cited by 312
Ma, X., Chang, P. R., & Yu, J. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.09.002 · Cited by 305
Cabedo, L., Luis Feijoo, J., Pilar Villanueva, M., Lagarón, J. M., & Giménez, E. (2006) · Macromolecular Symposia · doi:10.1002/masy.200690017 · Cited by 289
Panthapulakkal, S., Zereshkian, A., & Sain, M. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.02.043 · Cited by 284
Brazilian sugarcane bagasse: Energy and non-energy consumption
Hofsetz, K., & Silva, M. A. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.06.038 · Cited by 284
Production of biodegradable plastic from agricultural wastes
Mostafa, N. A., Farag, A. A., Abo-dief, H. M., & Tayeb, A. M. (2018) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2015.04.008 · Cited by 277
Cellulose nanomaterials: new generation materials for solving global issues
Mokhena, T. C., & John, M. J. (2020) · Cellulose · doi:10.1007/s10570-019-02889-w · Cited by 269
Wood fiber reinforced bacterial bioplastic composites: Fabrication and performance evaluation
SINGH, S., & MOHANTY, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.11.009 · Cited by 268
Biodegradable carboxymethyl cellulose based material for sustainable packaging application
Yaradoddi, J. S., Banapurmath, N. R., Ganachari, S. V., Soudagar, M. E. M., Mubarak, N. M., Hallad, S., Hugar, S., & Fayaz, H. (2020) · Scientific Reports · doi:10.1038/s41598-020-78912-z · Cited by 266
Starch-based nanocomposites reinforced with flax cellulose nanocrystals
Cao, X., Chen, Y., Chang, P. R., Muir, A. D., & Falk, G. (2008) · Express Polymer Letters · doi:10.3144/expresspolymlett.2008.60 · Cited by 256
Development of thermoplastic starch blown film by incorporating plasticized chitosan
Dang, K. M., & Yoksan, R. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.09.005 · Cited by 255
Aerobic biodegradation of cellulose acetate
Buchanan, C. M., Gardner, R. M., & Komarek, R. J. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070471001 · Cited by 254
A sustainable bioplastic obtained from rice straw
Bilo, F., Pandini, S., Sartore, L., Depero, L. E., Gargiulo, G., Bonassi, A., Federici, S., & Bontempi, E. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.252 · Cited by 252
Müller, C. M. O., Laurindo, J. B., & Yamashita, F. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.12.021 · Cited by 251
Kuang, Y., Chen, C., Pastel, G., Li, Y., Song, J., Mi, R., Kong, W., Liu, B., Jiang, Y., Yang, K., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802398 · Cited by 250
Material Properties of Plasticized Hardwood Xylans for Potential Application as Oxygen Barrier Films
Gröndahl, M., Eriksson, L., & Gatenholm, P. (2004) · Biomacromolecules · doi:10.1021/bm049925n · Cited by 249
Art and Science behind Modified Starch Edible Films and Coatings: A Review
Shah, U., Naqash, F., Gani, A., & Masoodi, F. A. (2016) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.12197 · Cited by 241
A Review of Water‐Resistant Hemicellulose‐Based Materials: Processing and Applications
Farhat, W., Venditti, R. A., Hubbe, M., Taha, M., Becquart, F., & Ayoub, A. (2017) · ChemSusChem · doi:10.1002/cssc.201601047 · Cited by 239
Aravamudhan, A., Ramos, D. M., Nada, A. A., & Kumbar, S. G. (2014) · Natural and Synthetic Biomedical Polymers · doi:10.1016/b978-0-12-396983-5.00004-1 · Cited by 238
Biodegradable films based on rice starch and rice flour
Dias, A. B., Müller, C. M. O., Larotonda, F. D. S., & Laurindo, J. B. (2010) · Journal of Cereal Science · doi:10.1016/j.jcs.2009.11.014 · Cited by 236
The effect of organosolv pretreatment variables on enzymatic hydrolysis of sugarcane bagasse
Mesa, L., González, E., Cara, C., González, M., Castro, E., & Mussatto, S. I. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.003 · Cited by 229
Reducing water absorption in compostable starch-based plastics
Gáspár, M., Benkő, Z., Dogossy, G., Réczey, K., & Czigány, T. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.03.012 · Cited by 228
Sustainable food-packaging materials based on future biorefinery products: Xylans and mannans
Mikkonen, K. S., & Tenkanen, M. (2012) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2012.06.012 · Cited by 225
Reduced water vapour sorption in cellulose nanocomposites with starch matrix
Svagan, A. J., Hedenqvist, M. S., & Berglund, L. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.11.016 · Cited by 212
Peng, X.-W., Ren, J.-L., Zhong, L.-X., & Sun, R.-C. (2011) · Biomacromolecules · doi:10.1021/bm2008795 · Cited by 212
Development and characterization of sugar palm starch and poly(lactic acid) bilayer films
Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Sahari, J. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.051 · Cited by 197
Shafqat, A., Al‐Zaqri, N., Tahir, A., & Alsalme, A. (2020) · Saudi Journal of Biological Sciences · doi:10.1016/j.sjbs.2020.12.015 · Cited by 196
High Strength Hemicellulose-Based Nanocomposite Film for Food Packaging Applications
Chen, G.-G., Qi, X.-M., Guan, Y., Peng, F., Yao, C.-L., & Sun, R.-C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01252 · Cited by 188
Feasibility of using kitchen waste as future substrate for bioethanol production: A review
Hafid, H. S., Rahman, N. A. A., Shah, U. K. M., Baharuddin, A. S., & Ariff, A. B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.071 · Cited by 179
Xylooligosaccharides production process from lignocellulosic biomass and bioactive effects
de Freitas, C., Carmona, E., & Brienzo, M. (2019) · Bioactive Carbohydrates and Dietary Fibre · doi:10.1016/j.bcdf.2019.100184 · Cited by 179
Self-citationOchi, S. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.12.019 · Cited by 175
Structure, organization, and functions of cellulose synthase complexes in higher plants
Festucci-Buselli, R. A., Otoni, W. C., & Joshi, C. P. (2007) · Brazilian Journal of Plant Physiology · doi:10.1590/s1677-04202007000100001 · Cited by 175
Ferreira, F. V., Mariano, M., Rabelo, S. C., Gouveia, R. F., & Lona, L. M. F. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2017.12.137 · Cited by 174
Bioplastic based on starch and cellulose nanocrystals from rice straw
Agustin, M. B., Ahmmad, B., Alonzo, S. M. M., & Patriana, F. M. (2014) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684414558325 · Cited by 169
Broeren, M. L. M., Kuling, L., Worrell, E., & Shen, L. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.001 · Cited by 161
Edible films and coatings: a review
Han, J. H., & Aristippos, G. (2005) · Innovations in Food Packaging · doi:10.1016/b978-012311632-1/50047-4 · Cited by 160
Optimization of thermo-chemical hydrolysis of kitchen wastes
Vavouraki, A. I., Angelis, E. M., & Kornaros, M. E. (2012) · Waste Management · doi:10.1016/j.wasman.2012.07.012 · Cited by 158
Rheological properties of cellulose nanocrystal-embedded polymer composites: a review
Ching, Y. C., Ali, M. E., Abdullah, L. C., Choo, K. W., Kuan, Y. C., Julaihi, S. J., Chuah, C. H., & Liou, N.-S. (2016) · Cellulose · doi:10.1007/s10570-016-0868-3 · Cited by 157
Xylan from corn cobs, a promising polymer for drug delivery: Production and characterization
Oliveira, E. E., Silva, A. E., Nagashima, T., Gomes, M. C. S., Muratori, L., Marcelino, H. R., de Araújo, I. B., Bayer, M. P., Ricardo, N. M. P. S., de Oliveira, A. G., et al. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.137 · Cited by 156
Biodegradable packages development from starch based heat sealable films
López, O. V., Lecot, C. J., Zaritzky, N., et al. (2011) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.02.029 · Cited by 155
Advances in lignocellulosic biotechnology: A brief review on lignocellulosic biomass and cellulases
Shahzadi, T., Mehmood, S., Irshad, M., Anwar, Z., Afroz, A., Zeeshan, N., Rashid, U., & Sughra, K. (2014) · Advances in Bioscience and Biotechnology · doi:10.4236/abb.2014.53031 · Cited by 150
Dissolution of kraft lignin using Protic Ionic Liquids and characterization
Rashid, T., Kait, C. F., Iyyaswami, R., & Murugesan, T. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.017 · Cited by 150
Enzymatic hydrolysis of food waste and ethanol fermentation
Moon, H. C., Song, I. S., Kim, J., Shirai, Y., Lee, D. H., Kim, J. K., Chung, S. O., Kim, D. H., Oh, K. K., & Cho, Y. S. (2008) · International Journal of Energy Research · doi:10.1002/er.1432 · Cited by 146
Key Factors Affecting the Recalcitrance and Conversion Process of Biomass
Melati, R. B., Shimizu, F. L., Oliveira, G., Pagnocca, F. C., de Souza, W., Sant’Anna, C., & Brienzo, M. (2018) · BioEnergy Research · doi:10.1007/s12155-018-9941-0 · Cited by 142
Self-citationReis, L. C. B., de Souza, C. O., da Silva, J. B. A., Martins, A. C., Nunes, I. L., & Druzian, J. I. (2014) · Food and Bioproducts Processing · doi:10.1016/j.fbp.2014.05.004 · Cited by 140
Kayserilioğlu, B. Ş., Bakır, U., Yılmaz, L., & Akkaş, N. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(02)00258-4 · Cited by 139
Shimizu, F. L., Monteiro, P. Q., Ghiraldi, P. H. C., Melati, R. B., Pagnocca, F. C., de Souza, W., Sant’Anna, C., & Brienzo, M. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.02.024 · Cited by 139
Self-citationActivation of Crystalline Cellulose Surfaces through the Chemoenzymatic Modification of Xyloglucan
Brumer, H., Zhou, Q., Baumann, M. J., Carlsson, K., & Teeri, T. T. (2004) · Journal of the American Chemical Society · doi:10.1021/ja0316770 · Cited by 137
Effect of candelilla wax on functional properties of biopolymer emulsion films – A comparative study
Kowalczyk, D., & Baraniak, B. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2014.04.004 · Cited by 137
Physical properties of edible emulsified films based on pistachio globulin protein and fatty acids
Zahedi, Y., Ghanbarzadeh, B., & Sedaghat, N. (2010) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2010.03.033 · Cited by 135
Production and Characterization of Films from Cotton Stalk Xylan
Goksu, E. I., Karamanlioglu, M., Bakır, U., Yılmaz, L., & Yilmazer, Ü. (2007) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf071893i · Cited by 134
Biodegradation of Hemicellulose-Cellulose-Starch-Based Bioplastics and Microbial Polyesters
Abe, M. M., Branciforti, M. C., & Brienzo, M. (2021) · Recycling · doi:10.3390/recycling6010022 · Cited by 130
Self-citationCassava (Manihot esculenta) starch films reinforced with natural fibrous filler
Versino, F., & García, M. A. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.04.040 · Cited by 128
The role of pretreatment in the catalytic valorization of cellulose
Liao, Y., de Beeck, B. O., Thielemans, K., Ennaert, T., Snelders, J., Dusselier, M., Courtin, C. M., & Sels, B. F. (2020) · Molecular Catalysis · doi:10.1016/j.mcat.2020.110883 · Cited by 128
Enzymatical hydrolysis of food waste and ethanol production from the hydrolysate
Yan, S., Li, J., Chen, X., Wu, J., Wang, P., Ye, J., & Jianming, Y. (2010) · Renewable Energy · doi:10.1016/j.renene.2010.08.020 · Cited by 127
Gu, J., Eberiel, D. T., McCarthy, S. P., & Gross, R. A. (1993) · Journal of Polymers and the Environment · doi:10.1007/bf01418207 · Cited by 124
A biodegradable and edible packaging film based on papaya puree, gelatin, and defatted soy protein
Tulamandi, S., Rangarajan, V., Rizvi, S. S. H., Singhal, R. S., Chattopadhyay, S. K., & Saha, N. C. (2016) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2016.10.007 · Cited by 121
Rivard, C. J., Moens, L. J., Roberts, K., Brigham, J. S., & Kelley, S. S. (1995) · Enzyme and Microbial Technology · doi:10.1016/0141-0229(94)00120-g · Cited by 119
Evaluation of the effects of additives on the properties of starch-based bioplastic film
Oluwasina, O. O., Akinyele, B. P., Olusegun, S. J., Oluwasina, O. O., & Mohallem, N. D. S. (2021) · SN Applied Sciences · doi:10.1007/s42452-021-04433-7 · Cited by 114
Innovation and Industrial Trends in Bioplastics
Queiroz, A. U. B., & Collares‐Queiroz, F. P. (2009) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583720902834759 · Cited by 112
A review on lignin sources and uses
Gomes, F. J. B., de Souza, R. E., Brito, E. O., & Lelis, R. C. C. (2020) · Journal of Applied Biotechnology & Bioengineering · doi:10.15406/jabb.2020.07.00222 · Cited by 111
Sabetzadeh, M., Bagheri, R., & Masoomi, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.11.038 · Cited by 108
Selective extraction and conversion of lignin in actual biomass to monophenols: A review
Jiang, Z., & Hu, C. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.10.008 · Cited by 104
Woehl, M. A., Canestraro, C. D., Mikowski, A., Sierakowski, M. R., Ramos, L. P., & Wypych, F. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.12.045 · Cited by 102
Hansen, N. M. L., Blomfeldt, T. O. J., Hedenqvist, M. S., & Plackett, D. (2012) · Cellulose · doi:10.1007/s10570-012-9764-7 · Cited by 102
Jin, Y., Li, Y., & Li, J. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2016.05.047 · Cited by 101
Pea starch‐based composite films with pea hull fibers and pea hull fiber‐derived nanowhiskers
Chen, Y., Liu, C., Chang, P. R., Anderson, D. P., & Huneault, M. A. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21290 · Cited by 93
Moorthy, S. N. (2004) · Elsevier eBooks · doi:10.1533/9781855739093.2.321 · Cited by 92
Novel nanocellulosic xylan composite film
Saxena, A., Elder, T., Pan, S., & Ragauskas, A. J. (2009) · Composites Part B Engineering · doi:10.1016/j.compositesb.2009.05.003 · Cited by 92
Cyras, V. P., Soledad, C. M., & Vázquez, A. (2009) · Polymer · doi:10.1016/j.polymer.2009.10.065 · Cited by 92
Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan
Saxena, A., & Ragauskas, A. J. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.03.039 · Cited by 91
Korol, J., Hejna, A., Burchart-Korol, D., & Wachowicz, J. (2020) · Materials · doi:10.3390/ma13163541 · Cited by 90
Review of direct chemical and biochemical transformations of starch
Хлесткин, В. К., Peltek, S. E., & Kolchanov, N. A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.035 · Cited by 87
Xylan–cellulose films: Improvement of hydrophobicity, thermal and mechanical properties
Gordobil, O., Egüés, I., Urruzola, I., & Labidi, J. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.05.060 · Cited by 85
Ekici, S. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-5158-0 · Cited by 85
Lee, H. W., Htoon, A., & PATERSON, J. (2006) · Food Chemistry · doi:10.1016/j.foodchem.2006.03.042 · Cited by 84
Formulating bioplastic composites for biodegradability, recycling, and performance: A Review
Hubbe, M. A., Lavoine, N., Lucia, L. A., & Dou, C. (2020) · BioResources · doi:10.15376/biores.16.1.hubbe · Cited by 84
Joshi, S. (2008) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2008.00039.x · Cited by 83
Structures, properties, modifications, and uses of oat starch
Zhu, F. (2017) · Food Chemistry · doi:10.1016/j.foodchem.2017.02.064 · Cited by 77
Lacerda, L. G., Colman, T. A. D., Bauab, T., Filho, M. A. D. S. C., Demiate, I. M., de Vasconcelos, E. C., & Schnitzler, E. (2013) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-013-3349-z · Cited by 70
Arabinoxylan/nanofibrillated cellulose composite films
Stevanic, J. S., Bergström, E. M., Gatenholm, P., Berglund, L. A., & Salmén, L. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6615-8 · Cited by 70
Ergun, R., Guo, J., & Hübner-Keese, B. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-384947-2.00127-6 · Cited by 70
Arabinoxylan structure affects the reinforcement of films by microfibrillated cellulose
Mikkonen, K. S., Pitkänen, L., Liljeström, V., Bergström, E. M., Serimaa, R. E., Salmén, L., & Tenkanen, M. (2012) · Cellulose · doi:10.1007/s10570-012-9655-y · Cited by 68
Suriyatem, R., Noikang, N., Kankam, T., et al. (2020) · Polymers · doi:10.3390/polym12071505 · Cited by 68
Hydroxypropylation improves film properties of high amylose corn starch
Kim, H. Y., Jane, J., & Lamsal, B. P. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.10.025 · Cited by 67
Composite films from spruce galactoglucomannans with microfibrillated spruce wood cellulose
Mikkonen, K. S., Stevanic, J. S., Joly, C., Dole, P., Pirkkalainen, K., Serimaa, R. E., Salmén, L., & Tenkanen, M. (2011) · Cellulose · doi:10.1007/s10570-011-9524-0 · Cited by 64
Guimarães, I. C., dos Reis, K. C., Menezes, E. G. T., Rodrigues, A. C., da Silva, T. F., de Oliveira, I. R. N., & Boas, E. V. D. B. V. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.05.024 · Cited by 61
do Lago, R. C., de Oliveira, A. L. M., Dias, M. C., Carvalho, E. E. N., Tonoli, G. H. D., & Boas, E. V. D. B. V. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.112264 · Cited by 61
Araújo, R. G., Rodríguez‐Jasso, R. M., Ruíz, H. A., Govea‐Salas, M., Rosas‐Flores, W., Aguilar-González, M. Á., Pintado, M., Lopez-Badillo, C. M., Luevanos, C., & Aguilar, C. N. (2020) · Processes · doi:10.3390/pr8070759 · Cited by 61
Hietala, M., Rollo, P., Kekäläinen, K., & Oksman, K. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39981 · Cited by 58
Sugarcane biomass conversion influenced by lignin
Schmatz, A. A., Tyhoda, L., & Brienzo, M. (2019) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.2070 · Cited by 58
Self-citationEffect of Fiber Orientation on Mechanical Properties of Kenaf-Reinforced Polymer Composite
Yong, C. K., Ching, Y. C., Chuah, C. H., & Liou, N.-S. (2015) · BioResources · doi:10.15376/biores.10.2.2597-2608 · Cited by 55
Herrera, N., Singh, A. A., Salaberria, A. M., Labidi, J., Mathew, A. P., & Oksman, K. (2017) · Polymers · doi:10.3390/polym9090406 · Cited by 55
Laure, S., Leschinsky, M., Fröhling, M., Schultmann, F., & Unkelbach, G. (2014) · Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft) · Cited by 54
Ehivet, F. E., Min, B., Park, M., & Oh, J. (2011) · Journal of Food Science · doi:10.1111/j.1750-3841.2010.01961.x · Cited by 53
Korol, J., Hejna, A., Burchart-Korol, D., Chmielnicki, B., & Wypiór, K. (2019) · Polymers · doi:10.3390/polym11111791 · Cited by 53
Enhanced lignin extraction process from steam exploded corn stalk
Wang, G., & Chen, H. (2015) · Separation and Purification Technology · doi:10.1016/j.seppur.2015.11.036 · Cited by 52
Sreekala, M. S., Koichi, G. O. D. A., & Devi, P. V. (2008) · Composite Interfaces · doi:10.1163/156855408783810812 · Cited by 50
Prospective Biodegradable Plastics from Biomass Conversion Processes
de Paula-Elias, F. C., de Paula, C. B. C., & Contiero, J. (2018) · InTech eBooks · doi:10.5772/intechopen.75111 · Cited by 47
Puyana, V. M. P., Félix, M., Romero, A., & Guerrero, A. F. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43306 · Cited by 45
Acetosolv pulping for the fractionation of empty fruit bunches from palm oil industry
Ferrer, A., Vega, A., Rodríguez, A., & Jiménez, L. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.12.189 · Cited by 41
Advanced Nano-biocomposites Based on Starch
Xie, F., Pollet, É., Halley, P. J., & Avérous, L. (2014) · Springer eBooks · doi:10.1007/978-3-319-03751-6_50-1 · Cited by 40
Self-citationFei, Z., Huang, S., Yin, J., Xu, F., & Zhang, Y. (2015) · Journal of Polymers and the Environment · doi:10.1007/s10924-015-0711-1 · Cited by 40
Lara-Flores, A. A., Araújo, R. G., Rodríguez‐Jasso, R. M., Aguedo, M., Aguilar, C. N., Trajano, H. L., & Ruíz, H. A. (2017) · Energy, environment, and sustainability · doi:10.1007/978-981-10-7431-8_8 · Cited by 40
Sieving process selects sugarcane bagasse with lower recalcitrance to xylan solubilization
Alves, R. C., Melati, R. B., Casagrande, G. M., Contiero, J., Pagnocca, F. C., & Brienzo, M. (2020) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.6541 · Cited by 38
Self-citationAbundance of polymers degrading microorganisms in a sea-based solid waste disposal site
Ishigaki, T., Sugano, W., Ike, M., Kawagoshi, Y., Fukunaga, I., & Fujita, M. (2000) · Journal of Basic Microbiology · Cited by 35
Effect of UV irradiation on cellulase degradation of cellulose acetate containing TiO2
Jang, J., Lee, H.-S., & Lyoo, W.-S. (2007) · Fibers and Polymers · doi:10.1007/bf02908155 · Cited by 34
A Review of Biodegradable Thermoplastic Starch Polymers
Halley, P. J., Truss, R. W., Markotsis, M. G., et al. (2007) · ACS symposium series · doi:10.1021/bk-2007-0978.ch024 · Cited by 32
Self-citationAcid hydrolysis of O-acetyl-galactoglucomannan
Kusema, B. T., Tönnov, T., Mäki‐Arvela, P., Salmi, T., Willför, S. M., Holmbom, B. R., & Murzin, D. Y. (2012) · Catalysis Science & Technology · doi:10.1039/c2cy20314f · Cited by 31
REVIEW OF BIOFUEL PRODUCTION – FEEDSTOCK, PROCESSES AND MARKETS — Review Article
Neuling, U. (2017) · Journal of Oil Palm Research · doi:10.21894/jopr.2017.2902.01 · Cited by 31
Chapter 10 Starch: Physicochemical and Functional Aspects
Eliasson, A. (2016) · CRC Press eBooks · doi:10.1201/9781315372822-11 · Cited by 30
Alkaline degradation kinetics and CE-separation of cello- and xylooligomers. Part I
Sartori, J., Potthast, A., Ecker, A., Sixta, H., Rosenau, T., & Kosma, P. (2003) · Carbohydrate Research · doi:10.1016/s0008-6215(03)00115-0 · Cited by 28
Kaur, D., Bhardwaj, N. K., & Lohchab, R. K. (2018) · Waste and Biomass Valorization · doi:10.1007/s12649-017-0193-6 · Cited by 27
Application of wheat B-starch in biodegradable plastic materials
Šárka, E., Kruliš, Z., Kotek, J., Růžek, L., Korbářová, A., Bubník, Z., & Růžková, M. (2011) · Czech Journal of Food Sciences · doi:10.17221/292/2010-cjfs · Cited by 24
Díaz, A., Dini, C., Viña, S. Z., & García, M. A. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.07.004 · Cited by 21
Gunasekaran, V., Ramesh, S., Sathiasivan, K., Shankar, M., Rajesh, M. P., & Tamilarasan, K. (2019) · Chemical Papers · doi:10.1007/s11696-019-00876-w · Cited by 21
Sun, B., Zhang, M., & Ni, Y. (2018) · Cellulose · doi:10.1007/s10570-018-1918-9 · Cited by 19
Anatomic influence of sugarcane biomass on xylan solubilization
Melati, R. B., Sass, D. C., Pagnocca, F. C., & Brienzo, M. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113357 · Cited by 17
Self-citationWei, X., Zhang, L., Wang, J., Li, J., & Zhou, W. (2020) · Materials Research Express · doi:10.1088/2053-1591/ab73fd · Cited by 13
Properties of cassava starch-based bioplastics and CMC with sorbitol as A plasticizer
Tamara, T., Sumari, S., Nazriati, N., & Arni, S. (2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/456/1/012077 · Cited by 13
Mechanical performance of starch-based biocomposites
Xie, F., Avérous, L., Halley, P. J., & Liu, P. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-373-7.00011-1 · Cited by 10
Self-citation
Cited by
Innovations in applications and prospects of bioplastics and biopolymers: a review
Nanda, S., Patra, B. R., Patel, R., Bakos, J., & Dalai, A. K. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01334-4 · Cited by 478
Lee, S. J., Gwak, M. A., Chathuranga, K., Lee, J. S., Koo, J., & Park, W. H. (2023) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.108249 · Cited by 259
Huang, S., Dong, Q., Che, S., Li, R., & Tang, K. H. D. (2025) · Science of The Total Environment · doi:10.1016/j.scitotenv.2025.178911 · Cited by 132
Reconsidering the potential of direct microalgal biomass utilization as end-products: A review
Choi, H. I., Sung, Y. J., Hong, M. E., Han, J., Min, B. K., & Sim, S. J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111930 · Cited by 37
Metadata
- Authors
- Abe, M. M., Martins, J. R., Sanvezzo, P. B., Macedo, J. V., Branciforti, M. C., Halley, P., Botaro, V. R., & Brienzo, M.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2021-07-28
- Volume
- 13
- Issue
- 15
- Pages
- 2484
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W3184571843
- Cited by
- 269
- References
- 170
- FWCI
- 8.24
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.