Development of 3D Printed Biodegradable Mesh with Antimicrobial Properties for Pelvic Organ Prolapse
Open accessThe DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Abstract
To address the increasing demand for safe and effective treatment options for pelvic organ prolapse (POP) due to the worldwide ban of the traditional polypropylene meshes, this study introduced degradable polycaprolactone (PCL)/polyethylene glycol (PEG) composite meshes fabricated with melt-electrowriting (MEW). Two PCL/PEG mesh groups: 90:10 and 75:25 (PCL:PEG, wt%) were fabricated and characterized for their degradation rate and mechanical properties, with PCL meshes used as a control. The PCL/PEG composites showed controllable degradation rates by adjusting the PEG content and produced mechanical properties, such as maximal forces, that were higher than PCL alone. The antibacterial properties of the meshes were elicited by coating them with a commonly used antibiotic: azithromycin. Two dosage levels were used for the coating: 0.5 mg and 1 mg per mesh, and both dosage levels were found to be effective in suppressing the growth of S. aureus bacteria. The biocompatibility of the meshes was assessed using human immortalized adipose derived mesenchymal stem cells (hMSC). In vitro assays were used to assess the cell viability (LIVE/DEAD assay), cell metabolic activity (alamarBlue assay) and cell morphology on the meshes (fluorescent and electron microscopy). The cell attachment was found to decrease with increased PEG content. The freshly drug-coated meshes showed signs of cytotoxicity during the cell study process. However, when pre-released for 14 days in phosphate buffered saline, the initial delay in cell attachment on the drug-coated mesh groups showed full recovery at the 14-day cell culture time point. These results indicated that the PCL/PEG meshes with antibiotics coating will be an effective anti-infectious device when first implanted into the patients, and, after about 2 weeks of drug release, the mesh will be supporting cell attachment and proliferation. These meshes demonstrated a potential effective treatment option for POP that may circumvent the issues related to the traditional polypropylene meshes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures












Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Targeting receptors such as transferrin, insulin, and LDL-related proteins allows selective and efficient nanoparticle (NP) uptake, facilitating delivery of therapeutic agents directly to affected brain regions [10, 11].”
From Targeted Nanoparticles for Drug Delivery Across the Blood–Brain Barrier in Early and Late Stages of Alzheimer's Disease: A Review (2026) · cites this paper as [11]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033 · cited 2×
“PCL, although commonly used as biomaterials, is known for its hydrophobicity which impedes cell adhesion [27].”
BackgroundSelf-citationMesenchymal stem cell perspective: cell biology to clinical progress
Pittenger, M. F., Discher, D. E., Péault, B. M., Phinney, D. G., Hare, J. M., & Caplan, A. I. (2019) · npj Regenerative Medicine · doi:10.1038/s41536-019-0083-6 · Cited by 2,008 · cited 1×
“Additionally, MSCs are immunomodulatory, producing cytokines that regulate immune cells, such as T cells, to influence the activation of the cells involved in wound healing and tissue repair [51].”
BackgroundAdaptive bone-remodeling theory applied to prosthetic-design analysis
Huiskes, R., Weinans, H., Grootenboer, H. J., Dalstra, M., Fudala, B., & Slooff, T. J. (1987) · Journal of Biomechanics · doi:10.1016/0021-9290(87)90030-3 · Cited by 1,173 · cited 1×
“Careful consideration should be given to the stiffness of the designed mesh as higher stiffness meshes have influenced: the rate of mesh-related complications [41,42], tissue remodelling response through stress shielding [64,65] and breakdown of collagen and elastin [66,67], resulting in an increasing risk of mesh exp…”
Effects of polyethylene glycol on the surface of nanoparticles for targeted drug delivery
Shi, L., Zhang, J., Zhao, M., Tang, S., Cheng, X., Zhang, W., Li, W., Liu, X., Peng, H., & Wang, Q. (2021) · Nanoscale · doi:10.1039/d1nr02065j · Cited by 808
Azithromycin: Mechanisms of action and their relevance for clinical applications
Parnham, M. J., Haber, V. E., Giamarellos-Bourboulis, E. J., Perletti, G., Verleden, G. M., & Vos, R. (2014) · Pharmacology & Therapeutics · doi:10.1016/j.pharmthera.2014.03.003 · Cited by 661 · cited 1×
“Its clinical uses include treatment of community-acquired pneumonia, otitis media, pharyngitis, cervical infections, pelvic inflammatory disease, skin infections as an alternative to beta-lactam antibiotics and as prophylaxis to vulnerable patients with advanced acquired immunodeficiency syndrome [60,61].”
BackgroundLam, C. X. F., Savalani, M. M., Teoh, S.-H., & Hutmacher, D. W. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034108 · Cited by 444 · cited 1×
“Three mesh samples of each group were weighed and immersed in 10 mL 5 M NaOH at 37 ◦C until the samples became irretrievable as reported previously [15].”
MethodVEGF expression by mesenchymal stem cells contributes to angiogenesis in pancreatic carcinoma
Beckermann, B. M., Kallifatidis, G., Groth, A., Frommhold, D., Apel, A., Mattern, J., Salnikov, A. V., Moldenhauer, G., Wagner, W., Diehlmann, A., et al. (2008) · British Journal of Cancer · doi:10.1038/sj.bjc.6604508 · Cited by 406 · cited 1×
“MSCs also produce various types of growth factors, including VEGF, which will assist with production of blood vessels and tissue integration [50].”
BackgroundDowling, D. P., Miller, I. S., Ardhaoui, M., & Gallagher, W. M. (2011) · Journal of Biomaterials Applications · doi:10.1177/0885328210372148 · Cited by 376 · cited 1×
“Other studies have shown that the relationship between surface wettability and cell adhesion displays a bell shape distribution rather than a linear relationship, with the ideal hydrophilicity being cell-dependent [55,56].”
BackgroundVaginal mesh erosion after abdominal sacral colpopexy
Visco, A. G., Weidner, A. C., Barber, M. D., Myers, E. R., Cundiff, G. W., Bump, R. C., & Addison, W. A. (2001) · American Journal of Obstetrics and Gynecology · doi:10.1067/mob.2001.109654 · Cited by 247 · cited 2×
“meshes can influence the rate of mesh-related complications [41,42], resulting in increasing risk of mesh exposure [40].”
BackgroundEffects of Rigidity of an Internal Fixation Device A Comprehensive Biomechanical Investigation
GOEL, V. K., LIM, T.-H., GWON, J., CHEN, J.-Y., WINTERBOTTOM, J. M., PARK, J. B., WEINSTEIN, J. N., & AHN, J.-Y. (1991) · Spine · doi:10.1097/00007632-199103001-00023 · Cited by 190 · cited 1×
“Careful consideration should be given to the stiffness of the designed mesh as higher stiffness meshes have influenced: the rate of mesh-related complications [41,42], tissue remodelling response through stress shielding [64,65] and breakdown of collagen and elastin [66,67], resulting in an increasing risk of mesh exp…”
Background
Cited by
Kochman, U., Sitka, H., Kuźniar, J., Czaja, M., Kozubek, P., Beszłej, J. A., & Leszek, J. (2026) · Molecular Neurobiology · doi:10.1007/s12035-025-05417-z · Cited by 60
Emerging materials and technologies for advancing bioresorbable surgical meshes
Heidari, B. S., Dodda, J. M., El-Khordagui, L. K., Focarete, M. L., Maróti, P., Tóth, L., Pacilio, S., El-Habashy, S. E., Boateng, J. S., Catanzano, O., et al. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2024.06.012 · Cited by 64
Rajaram, K., Lee, J. H., Youn, J. K., Jang, T., Han, W. B., Yang, S. M., Shin, J., Ko, G., Kim, D., Han, S., et al. (2023) · Advanced Materials · doi:10.1002/adma.202307391 · Cited by 44
Rising role of 3D-printing in delivery of therapeutics for infectious disease
Kyser, A. J., Fotouh, B., Mahmoud, M. Y., & Frieboes, H. B. (2024) · Journal of Controlled Release · doi:10.1016/j.jconrel.2023.12.051 · Cited by 29
Tissue-engineered repair material for pelvic floor dysfunction
Lin, M., Lu, Y., & Chen, J. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.968482 · Cited by 33
3D printed materials for combating antimicrobial resistance
Doganay, M. T., Chelliah, C. R. A. J., Tozluyurt, A., Hujer, A. M., Obaro, S., Gurkan, U. A., Patel, R., Bonomo, R. A., & Draz, M. S. (2023) · Materials Today · doi:10.1016/j.mattod.2023.05.030 · Cited by 27
Sterk, S., Silva, M. E., Fernandes, A. A., Huß, A., & Wittek, A. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54687 · Cited by 25
Devlin, B. L., Kuba, S., Hall, P. C., McCosker, A. B., Pickering, E., Dalton, P. D., Klein, T. J., Woodruff, M. A., & Paxton, N. C. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400419 · Cited by 24
Self-citationA detailed guide to melt electro-writing for tissue engineering applications
Snow, F., Doyle, S. E., Liu, E. I., Rauch, D. D., Millett, D., Wilding-McBride, J., Kita, M., Pirogova, E., Kapsa, R. M. I., & Quigley, A. F. (2025) · Biofabrication · doi:10.1088/1758-5090/adfbc4 · Cited by 19
Innovative Strategies in Hernia Mesh Design: Materials, Mechanics, and Modeling
Antoniadi, E., Ferreira, N. M., Vaz, F., Parente, M., Ferraz, M. P., & Silva, M. E. (2025) · Materials · doi:10.3390/ma18153509 · Cited by 19
“Additionally, the mechanical strength and stiffness of the PCL/PEG meshes were significantly improved, with the 75:25 composition achieving a 127% increase in tensile strength compared to PCL alone [63].”
InfluentialVaz, F., Martins, J. P., Pinheiro, F., Ferreira, N. M., Brandão, S., Alves, J. L., Fernandes, A. A., Parente, M., & Silva, M. E. (2024) · Applied Sciences · doi:10.3390/app14219670 · Cited by 15
Accelerated degradation testing impacts the degradation processes in 3D printed amorphous PLLA
Malone, L. P., Best, S. M., & Cameron, R. E. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1419654 · Cited by 17
Mace, M. A. M., Reginatto, C. L., Soares, R. M. D., & Fuentefría, A. M. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00334 · Cited by 14
Vaz, F., Martins, J. P., Pinheiro, F., Ferreira, N. M., Brandão, S., Alves, J. L., Fernandes, A. A., Parente, M., & Silva, M. E. (2024) · Journal of Applied Polymer Science · doi:10.1002/app.56408 · Cited by 13
A novel degradable PCL/PLLA strapping band for internal fixation of fracture
Jin, B., Zhang, C., Zhong, Z., Liu, Z., Zhang, Z., Li, D., Zhu, M., & Yu, B. (2023) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-023-06759-7 · Cited by 11
Mathew, A., Devlin, B. L., Singh, D., Paxton, N. C., & Woodruff, M. A. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300168 · Cited by 11
Self-citationZheng, Z., Wang, M., Ren, A., Cheng, Z., Li, X., & Guo, C. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c00368 · Cited by 8
Vaz, F., Silva, M. E., Parente, M., Brandão, S., & Fernandes, A. A. (2024) · Engineering Computations · doi:10.1108/ec-12-2023-0967 · Cited by 8
Zhang, Y., Zhao, F., Qiao, A., Liu, Y., & Chen, M. (2026) · Nano-Micro Letters · doi:10.1007/s40820-025-01986-9 · Cited by 11
“For instance, PCL/PEG crosshatch scaffolds loaded with azithromycin inhibited S. aureus, with smaller pores exhibiting faster release [264], while vancomycin-loaded wavy PCL fibers achieved 18% loading efficiency and provided burst release followed by sustained delivery over 14 days [265].”
Self-citationDarroch, C., Digeronimo, F., Asaro, G. A., Minsart, M., Pien, N., Vlierberghe, S. V., & Monaghan, M. G. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad5b41 · Cited by 8
Brebels, J., Agten, H., Smet, M., Bloemen, V., & Mignon, A. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102422 · Cited by 9
Zhang, Y., Zhao, F., Chen, S., Li, B., Dong, J., Chen, Y., Liu, Y., Qiao, A., & Chen, M. (2026) · Acta Biomaterialia · doi:10.1016/j.actbio.2026.02.015 · Cited by 7
Self-citationPelvic Organ Prolapse – General Overview and Latest Therapy Possibilities
Wojtas, A. K., Cygnarowicz, A., Sacher, K., Zabojska, K., Korotko, U., Mandziuk, A., Witowska, K., Turemka, M., Biskupski, M., & Hosseinnejad, N. (2024) · Quality in Sport · doi:10.12775/qs.2024.25.56803 · Cited by 6
Bioinspired scaffold design using a custom Voronoi path generator for extrusion-based 3D printing
Farina, F., Licciardello, M., Moroni, L., Babilotte, J., Ciardelli, G., & Tonda‐Turo, C. (2026) · Biomaterials Science · doi:10.1039/d5bm01834j · Cited by 4
Kyser, A. J., Mahmoud, M. Y., Fotouh, B., Patel, R., Armstrong, C. N., Aagard, M. A., Rush, I., Lewis, W. G., Lewis, A. L., & Frieboes, H. B. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.214005 · Cited by 4
Wedge resection combined with 3D-printed polycaprolactone mesh for caudal septal deviation
Moon, J. W., Choi, S.-Y., Kim, S.-J., Shin, J., & Park, I. (2023) · Journal of Otolaryngology - Head and Neck Surgery · doi:10.1186/s40463-023-00677-y · Cited by 4
“However, the research is ongoing for its use on stress urine incontinence or pelvic prolapse with satisfying results, so we expect the PCL mesh soon to be available worldwide [21, 22].”
BackgroundMelt electrowriting for bone repair: A review of scaffold architectures and material selection
Jangi, R., Zgeib, R., Zaeri, A., & Chang, R. C. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00474 · Cited by 5
Vaz, F., Silva, T., Silva, M. E., Parente, M., Brandão, S., & Fernandes, A. A. (2025) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/09544119251323336 · Cited by 3
“11 MEW is an innovative method that combines low-cost with high-precision additive manufacturing.”
Kim, J., Jeong, H., Park, J.-W., Gwak, S., Han, J., Jung, K. I., & Lee, S. (2025) · Polymers · doi:10.3390/polym17010118 · Cited by 3
“Furthermore, the inner layer could be loaded with antifibrotic agents such as mitomycin C or 5-FU, which could be applied to various ophthalmic surgeries requiring IOP control.”
Martins, J. P., de Sousa, A. S., Costa‐de‐Oliveira, S., Fernandes, A. A., & Silva, M. E. (2025) · Macromol—A Journal of Macromolecular Research · doi:10.3390/macromol5030033 · Cited by 2
Martins, J. P., Sousa, A. S., Costa‐de‐Oliveira, S., Fernandes, A. A., & Silva, M. E. (2025) · Applied Sciences · doi:10.3390/app15179436 · Cited by 2
Seifalian, A., Al-Uloom, T. F. M. B., Seifalian, N., Digesu, G. A., & Khullar, V. (2025) · International Urogynecology Journal · doi:10.1007/s00192-025-06370-0 · Cited by 2
“The degradation process needs to be at a rate that supports native tissue regeneration and prevents breakdown of mechanical strength [37], hence the current lack of long-term efficacy of biodegradable implants and greater likelihood of POP recurrence.”
A New Dimension in Pessary Care
Kisby, C. K. (2023) · Urogynecology · doi:10.1097/spv.0000000000001360 · Cited by 2
Antistatic Melt-Electrowritten Biodegradable Mesh Implants for Enhanced Pelvic Organ Prolapse Repair
Cruz, D., Vaz, F., Antoniadi, E., Silva, A. T., Martins, J. P., Pinheiro, F., Ferreira, N. M., Bebiano, L. B., Pereira, R. F., Fernandes, A. A., et al. (2025) · Applied Sciences · doi:10.3390/app15147763 · Cited by 1
Brebels, J., Saraiva, S., Agten, H., Smet, M., Bloemen, V., Fonseca, A. M. L. M., & Mignon, A. (2026) · Biofabrication · doi:10.1088/1758-5090/ae3cc4 · Cited by 1
Abed, H., Georgeous, J., Joshi, K., Khader, B. A., & Al-Othman, A. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.116216 · Cited by 1
Singh, S. K., Kumar, M., Choudhary, D., Dikshant, Kumar, D., Chopra, S., & Bhatia, A. (2025) · Current Pharmaceutical Design · doi:10.2174/0113816128365632250524160128 · Cited by 1
Jamaludin, A. S., Rosli, A. M., Hamran, N. N. N., Zawawi, M. Z. M., & Ali, M. A. M. (2024) · Lecture notes in networks and systems · doi:10.1007/978-981-99-8819-8_33
Evaluation Methods for Mechanical Biocompatibility of Innovative Prolapse Repair Meshes
Ferreira, N. M., Almeida, J., Vaz, F., Silva, A. T., Silva, A. R., Parente, M., Fernandes, A. A., & Silva, M. E. (2025) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.70115
“Ren et al. also explored this approach, finding that biodegradable meshes could serve as an effective treatment option for POP [16].”
3D Printing for Pelvic Organ Prolapse Management: A Narrative Review of Emerging Applications
Wei, X., Wang, X., Yang, X., Qiao, M., Chen, Y., Hoerning, A., Liu, X., & Ren, C. (2026) · Bioengineering · doi:10.3390/bioengineering13050488
“Pilot animal experiments in rodent studies [40] have shown superior tissue integration and reduced inflammatory responses compared with polypropylene meshes.”
Surgical meshes: types, clinical applications, and associated complications
Rezvani, M., Zamani, S., Rad, S. S., Naeiji, M., Maghsoodifar, H., Vataniman, M., Jahanbazi, R., & Salehi, M. (2026) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2026.2675313
Polymers for Pelvic Floor Repair: Current State and Future Prospects.
Spece, H., Varghese, S. A., Artsen, A. M., & Moalli, P. (2026) · PubMed · doi:10.1097/spv.0000000000001936
Alperin, M., Moalli, P., Acoff, E. T., Alarab, M., Balgobin, S., Botros-Brey, S., Chidawanyika, T., Ferrara, K., Hennes, D. M. Z. B., Hijaz, A., et al. (2026) · International Urogynecology Journal · doi:10.1007/s00192-026-06926-8
Metadata
- Authors
- Ren, J., Murray, R., Wong, C. S., Qin, J., Chen, M., Totsika, M., Riddell, A. D., Warwick, A., Rukin, N., & Woodruff, M. A.
- Affiliations
- Queensland University of Technology (AU)
- The University of Queensland (AU)
- St Vincent's Hospital Melbourne (AU)
- Redcliffe Hospital (AU)
- Corresponding author
- Woodruff, Maria A.
- ORCID
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2022-02-16
- Volume
- 14
- Issue
- 4
- Pages
- 763
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC8877663
- OpenAlex
- W4213118871
- Cited by
- 42
- References
- 65
- Citations by year
- 2026: 9 · 2025: 12 · 2024: 13 · 2023: 7 · 2022: 1
- FWCI
- 2.06
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- QUT ePrints (Queensland University of Technology) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Metro North Hospital and Health Services; Queensland University of Technology (CRG 172-2019)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Health Sciences › Medicine › Urology › Pelvic floor disorders treatments
- Keywords
- pelvic organ prolapse, biodegradable mesh, polycaprolactone, polyethylene glycol, melt electrowriting, antimicrobial coatings, azithromycin, Staphylococcus aureus, mechanical properties, adipose-derived stem cells, biocompatibility, cytotoxicity, drug release
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.