Development of 3D Printed Biodegradable Mesh with Antimicrobial Properties for Pelvic Organ Prolapse
Open accessThe DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Abstract
To address the increasing demand for safe and effective treatment options for pelvic organ prolapse (POP) due to the worldwide ban of the traditional polypropylene meshes, this study introduced degradable polycaprolactone (PCL)/polyethylene glycol (PEG) composite meshes fabricated with melt-electrowriting (MEW). Two PCL/PEG mesh groups: 90:10 and 75:25 (PCL:PEG, wt%) were fabricated and characterized for their degradation rate and mechanical properties, with PCL meshes used as a control. The PCL/PEG composites showed controllable degradation rates by adjusting the PEG content and produced mechanical properties, such as maximal forces, that were higher than PCL alone. The antibacterial properties of the meshes were elicited by coating them with a commonly used antibiotic: azithromycin. Two dosage levels were used for the coating: 0.5 mg and 1 mg per mesh, and both dosage levels were found to be effective in suppressing the growth of S. aureus bacteria. The biocompatibility of the meshes was assessed using human immortalized adipose derived mesenchymal stem cells (hMSC). In vitro assays were used to assess the cell viability (LIVE/DEAD assay), cell metabolic activity (alamarBlue assay) and cell morphology on the meshes (fluorescent and electron microscopy). The cell attachment was found to decrease with increased PEG content. The freshly drug-coated meshes showed signs of cytotoxicity during the cell study process. However, when pre-released for 14 days in phosphate buffered saline, the initial delay in cell attachment on the drug-coated mesh groups showed full recovery at the 14-day cell culture time point. These results indicated that the PCL/PEG meshes with antibiotics coating will be an effective anti-infectious device when first implanted into the patients, and, after about 2 weeks of drug release, the mesh will be supporting cell attachment and proliferation. These meshes demonstrated a potential effective treatment option for POP that may circumvent the issues related to the traditional polypropylene meshes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures












Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“Targeting receptors such as transferrin, insulin, and LDL-related proteins allows selective and efficient nanoparticle (NP) uptake, facilitating delivery of therapeutic agents directly to affected brain regions [10, 11].”
From Targeted Nanoparticles for Drug Delivery Across the Blood–Brain Barrier in Early and Late Stages of Alzheimer's Disease: A Review (2026) · cites this paper as [11]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033 · cited 2×
“PCL, although commonly used as biomaterials, is known for its hydrophobicity which impedes cell adhesion [27].”
BackgroundSelf-citationMesenchymal stem cell perspective: cell biology to clinical progress
Pittenger, M. F., Discher, D. E., Péault, B. M., Phinney, D. G., Hare, J. M., & Caplan, A. I. (2019) · npj Regenerative Medicine · doi:10.1038/s41536-019-0083-6 · Cited by 2,008 · cited 1×
“Additionally, MSCs are immunomodulatory, producing cytokines that regulate immune cells, such as T cells, to influence the activation of the cells involved in wound healing and tissue repair [51].”
BackgroundAdaptive bone-remodeling theory applied to prosthetic-design analysis
Huiskes, R., Weinans, H., Grootenboer, H. J., Dalstra, M., Fudala, B., & Slooff, T. J. (1987) · Journal of Biomechanics · doi:10.1016/0021-9290(87)90030-3 · Cited by 1,173
Effects of polyethylene glycol on the surface of nanoparticles for targeted drug delivery
Shi, L., Zhang, J., Zhao, M., Tang, S., Cheng, X., Zhang, W., Li, W., Liu, X., Peng, H., & Wang, Q. (2021) · Nanoscale · doi:10.1039/d1nr02065j · Cited by 808
Azithromycin: Mechanisms of action and their relevance for clinical applications
Parnham, M. J., Haber, V. E., Giamarellos-Bourboulis, E. J., Perletti, G., Verleden, G. M., & Vos, R. (2014) · Pharmacology & Therapeutics · doi:10.1016/j.pharmthera.2014.03.003 · Cited by 661
Lam, C. X. F., Savalani, M. M., Teoh, S.-H., & Hutmacher, D. W. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034108 · Cited by 444
VEGF expression by mesenchymal stem cells contributes to angiogenesis in pancreatic carcinoma
Beckermann, B. M., Kallifatidis, G., Groth, A., Frommhold, D., Apel, A., Mattern, J., Salnikov, A. V., Moldenhauer, G., Wagner, W., Diehlmann, A., et al. (2008) · British Journal of Cancer · doi:10.1038/sj.bjc.6604508 · Cited by 406
Dowling, D. P., Miller, I. S., Ardhaoui, M., & Gallagher, W. M. (2011) · Journal of Biomaterials Applications · doi:10.1177/0885328210372148 · Cited by 376
Vaginal mesh erosion after abdominal sacral colpopexy
Visco, A. G., Weidner, A. C., Barber, M. D., Myers, E. R., Cundiff, G. W., Bump, R. C., & Addison, W. A. (2001) · American Journal of Obstetrics and Gynecology · doi:10.1067/mob.2001.109654 · Cited by 247
Effects of Rigidity of an Internal Fixation Device A Comprehensive Biomechanical Investigation
GOEL, V. K., LIM, T.-H., GWON, J., CHEN, J.-Y., WINTERBOTTOM, J. M., PARK, J. B., WEINSTEIN, J. N., & AHN, J.-Y. (1991) · Spine · doi:10.1097/00007632-199103001-00023 · Cited by 190
Cosson, M., Debodinance, P., Boukerrou, M., Chauvet, M. P., Lobry, P., Cr�pin, G., & Ego, A. (2003) · International Urogynecology Journal and Pelvic Floor Dysfunction · doi:10.1007/s00192-003-1066-z · Cited by 169
Vaginal degeneration following implantation of synthetic mesh with increased stiffness
Liang, R., Abramowitch, S., Knight, K., Palcsey, S., Nolfi, A., Feola, A., Stein, S., & Moalli, P. (2013) · BJOG: An International Journal of Obstetrics & Gynaecology · doi:10.1111/1471-0528.12085 · Cited by 164
Keltie, K., Elneil, S., Monga, A., Patrick, H., Powell, J., Campbell, B., & Sims, A. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-11821-w · Cited by 158
Host response to synthetic mesh in women with mesh complications
Nolfi, A. L., Brown, B. N., Liang, R., Palcsey, S. L., Bonidie, M. J., Abramowitch, S. D., & Moalli, P. (2016) · American Journal of Obstetrics and Gynecology · doi:10.1016/j.ajog.2016.04.008 · Cited by 147
Wang, H., Feng, Y., Fang, Z., Yuan, W., & Khan, M. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.07.001 · Cited by 129
Bakheit, A. H. H., Al‐Hadiya, B. M. H., & Abdelgalil, A. A. (2014) · Profiles of drug substances, excipients, and related methodology · doi:10.1016/b978-0-12-800173-8.00001-5 · Cited by 127
Trends in use of surgical mesh for pelvic organ prolapse
Funk, M. J., Edenfield, A. L., Pate, V., Visco, A. G., Weidner, A. C., & Wu, J. M. (2012) · American Journal of Obstetrics and Gynecology · doi:10.1016/j.ajog.2012.11.008 · Cited by 120
Paul, K., Darzi, S., Mcphee, G., Borgo, M. P. D., Werkmeister, J. A., Gargett, C. E., & Mukherjee, S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.08.003 · Cited by 118
Stewart, S. A., Domínguez‐Robles, J., McIlorum, V. J., González, Z., Utomo, E., Mancuso, E., Lamprou, D. A., Donnelly, R. F., & Larrañeta, E. (2020) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.0c00515 · Cited by 105
Clavé, A., Yahi, H., Hammou, J. C., Montanari, S., Gounon, P., & Clavé, H. (2010) · International Urogynecology Journal · doi:10.1007/s00192-009-1021-8 · Cited by 104
Ren, J., Blackwood, K. A., Doustgani, A., Poh, P. P., Steck, R., Stevens, M. M., & Woodruff, M. A. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34985 · Cited by 97
Self-citationHao, L., Yang, H., Du, C., Fu, X., Zhao, N., Xu, S., Cui, F., Mao, C., & Wang, Y. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00597j · Cited by 96
Mesh removal following transvaginal mesh placement: a case series of 104 operations
Marcus-Braun, N., & von Théobald, P. (2009) · International Urogynecology Journal · doi:10.1007/s00192-009-1050-3 · Cited by 93
Gu, W., Hong, X., Bras, A. L., Nowak, W. N., Bhaloo, S. I., Deng, J., Xie, Y., Hu, Y., Ruan, X. Z., & Xu, Q. (2018) · Journal of Biological Chemistry · doi:10.1074/jbc.ra118.001739 · Cited by 93
Mechanical Properties of Mesh Materials Used for Hernia Repair and Soft Tissue Augmentation
Pott, P. P., Schwarz, M., Gundling, R., Nowak, K., Hohenberger, P., & Roessner, E. D. (2012) · PLoS ONE · doi:10.1371/journal.pone.0046978 · Cited by 87
Mathew, A., Vaquette, C., Hashimi, S., Rathnayake, I., Huygens, F., Hutmacher, D. W., & Ivanovski, S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601345 · Cited by 86
Lake, S. P., Ray, S., Zihni, A. M., Thompson, D. M., Gluckstein, J. A., & Deeken, C. R. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.11.011 · Cited by 85
Lins, L. C., Wianny, F., Livi, S., Hidalgo, I. A., Dehay, C., Duchet‐Rumeau, J., & Gérard, J. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00820 · Cited by 80
Degradation and Viscoelastic Properties of PLA-PCL, PGA-PCL, PDO and PGA Fibres
Vieira, A. C., Vieira, J. C., Guedes, R. M., & Marques, A. T. (2010) · Materials science forum · doi:10.4028/www.scientific.net/msf.636-637.825 · Cited by 76
Evaluation of the use of human Mesenchymal Stem Cells for acute toxicity tests
Scanu, M., Mancuso, L., & Cao, G. (2011) · Toxicology in Vitro · doi:10.1016/j.tiv.2011.07.006 · Cited by 72
Landmarks in vaginal mesh development: polypropylene mesh for treatment of SUI and POP
Mangır, N., Dikici, B. A., Chapple, C. R., & MacNeil, S. (2019) · Nature Reviews Urology · doi:10.1038/s41585-019-0230-2 · Cited by 71
Mistrangelo, E., Mancuso, S., Nadalini, C., Lijoi, D., & Costantini, S. (2007) · Journal of Minimally Invasive Gynecology · doi:10.1016/j.jmig.2007.04.017 · Cited by 64
Mangır, N., Hillary, C. J., Chapple, C. R., & MacNeil, S. (2017) · European Urology Focus · doi:10.1016/j.euf.2017.05.004 · Cited by 64
Paxton, N. C., Ren, J., Ainsworth, M. J., Solanki, A. K., Jones, J. R., Allenby, M. C., Stevens, M. M., & Woodruff, M. A. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900019 · Cited by 63
Self-citationCharacterizing the ex vivo textile and structural properties of synthetic prolapse mesh products
Feola, A., Barone, W., Moalli, P., & Abramowitch, S. (2013) · International Urogynecology Journal · doi:10.1007/s00192-012-1901-1 · Cited by 62
Characterisation of clinical and newly fabricated meshes for pelvic organ prolapse repair
Edwards, S. L., Werkmeister, J. A., Rosamilia, A., Ramshaw, J. A. M., White, J., & Gargett, C. E. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.04.002 · Cited by 61
Vashaghian, M., Ruiz‐Zapata, A. M., Kerkhof, M. H., Zandieh‐Doulabi, B., Werner, A., Roovers, J., & Smit, T. H. (2016) · Neurourology and Urodynamics · doi:10.1002/nau.22969 · Cited by 60
Douglas, P., Albadarin, A. B., Sajjia, M., Mangwandi, C., Kuhs, M., Collins, M. N., & Walker, G. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.01.036 · Cited by 58
Mancuso, E., Downey, C. L., Doxford‐Hook, E., Bryant, M., & Culmer, P. (2019) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34432 · Cited by 57
A 3D printed drug delivery implant formed from a dynamic supramolecular polyurethane formulation
Salimi, S., Wu, Y., Barreiros, M. I. E., Natfji, A. A., Khaled, S. A., Wildman, R. D., Hart, L. R., Greco, F., Clark, E. A., Roberts, C. J., et al. (2020) · Polymer Chemistry · doi:10.1039/d0py00068j · Cited by 56
Sezer, Ü. A., Şanko, V., Gülmez, M., Aru, B., Sayman, E., Aktekin, A., Aker, F., Demirel, G. Y., & Sezer, S. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.02.064 · Cited by 52
Briggs, T., Treiser, M. D., Holmes, P. F., Kohn, J., Moghe, P. V., & Arinzeh, T. L. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32310 · Cited by 46
Effects of Stress Shielding on the Transverse Mechanical Properties of Rabbit Patellar Tendons
YAMAMOTO, E., Hayashi, K., & Yamamoto, N. (2000) · Journal of Biomechanical Engineering · doi:10.1115/1.1319660 · Cited by 45
Weyhe, D., Cobb, W. S., Lecuivre, J., Alves, A., Ladet, S., Lomanto, D., & Bayon, Y. (2015) · International Journal of Surgery · doi:10.1016/j.ijsu.2015.07.717 · Cited by 43
Crystallization and Segregation Behavior at the Submicrometer Scale of PCL/PEG Blends
Nguyen‐Tri, P., & Prud'homme, R. E. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01503 · Cited by 43
Vashaghian, M., Zandieh‐Doulabi, B., Roovers, J., & Smit, T. H. (2016) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0194 · Cited by 41
Solovieva, A. O., Miroshnichenko, S. M., Kovalskii, A. M., Permyakova, E. S., Popov, Z. I., Dvořáková, E., Kiryukhantsev–Korneev, P. V., Obrosov, A., Polčák, J., Zajı́čková, L., et al. (2017) · Polymers · doi:10.3390/polym9120736 · Cited by 39
Pang, L., Paxton, N. C., Ren, J., Liu, F., Zhan, H., Woodruff, M. A., Bo, A., & Gu, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c14831 · Cited by 37
Self-citationBasic science and clinical aspects of mesh infection in pelvic floor reconstructive surgery
de Tayrac, R., & Letouzey, V. (2011) · International Urogynecology Journal · doi:10.1007/s00192-011-1405-4 · Cited by 32
Mirjavan, M., Asayesh, A., & Jeddi, A. A. A. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.10.016 · Cited by 32
Regulatory Warnings and Use of Surgical Mesh in Pelvic Organ Prolapse
Sedrakyan, A., Chughtai, B. I., & Mao, J. (2015) · JAMA Internal Medicine · doi:10.1001/jamainternmed.2015.6595 · Cited by 31
Khaki, M., Salmanian, A. H., Abtahi, H., Ganji, A., & Mosayebi, G. (2018) · Europe PMC (PubMed Central) · Cited by 31
Gibson, W., & Wagg, A. (2015) · BJOG An International Journal of Obstetrics & Gynaecology · doi:10.1111/1471-0528.13338 · Cited by 29
The influence of the mechanical environment on remodelling of the patellar tendon
Rumian, A. P., Draper, E. R. C., Wallace, A. L., & Goodship, A. E. (2009) · Journal of Bone and Joint Surgery - British Volume · doi:10.1302/0301-620x.91b4.21580 · Cited by 29
Lanaro, M., Luu, A., Lightbody-Gee, A., Hedger, D., Powell, S. K., Holmes, D. W., & Woodruff, M. A. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06634-1 · Cited by 26
Self-citationSultana, N., Arayne, M. S., Hussain, F., & Fatima, A. (2006) · PubMed · Cited by 25
Enzyme‐Degradable 3D Multi‐Material Microstructures
Gräfe, D., Gernhardt, M., Ren, J., Blasco, E., Wegener, M., Woodruff, M. A., & Barner‐Kowollik, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202006998 · Cited by 24
Self-citationGuazzelli, E., Galli, G., & Martinelli, E. (2020) · Polymers · doi:10.3390/polym12061236 · Cited by 20
Managing female pelvic floor disorders: a medical device review and appraisal
Powers, S. A., Burleson, L. K., & Hannan, J. L. (2019) · Interface Focus · doi:10.1098/rsfs.2019.0014 · Cited by 19
Maria, C. D., Santoro, V., & Vozzi, G. (2016) · BioMed Research International · doi:10.1155/2016/1267521 · Cited by 16
Ranganathan, S. I., Kohama, C., Mercurio, T., Salvatore, A., Benmassaoud, M. M., & Kim, T. W. B. (2020) · Biomedical Microdevices · doi:10.1007/s10544-020-00512-5 · Cited by 15
Lu, Y., Fu, S., Zhou, S., Chen, G., Zhu, C., Li, N., & Ma, Y. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.02.030 · Cited by 10
Nanofibrous biomimetic mesh can be used for pelvic reconstructive surgery: A randomized study
Ding, J., Deng, M., Song, X., Chen, C., Lai, K., Wang, G., Yuan, Y., Xu, T., & Zhu, L. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.01.003 · Cited by 7
Azithromycin for PID beats doxycycline on all counts.
Rowland, K., & Ewigman, B. (2007) · PubMed · Cited by 3
BIOCOMPATIBILITY OF AZITROMICYN ON CONNECTIVE TISSUE
Kurnia, S. (2015) · Indonesian Journal of Tropical and Infectious Disease · doi:10.20473/ijtid.v2i1.189 · Cited by 1
Cited by
Kochman, U., Sitka, H., Kuźniar, J., Czaja, M., Kozubek, P., Beszłej, J. A., & Leszek, J. (2026) · Molecular Neurobiology · doi:10.1007/s12035-025-05417-z · Cited by 60
Emerging materials and technologies for advancing bioresorbable surgical meshes
Heidari, B. S., Dodda, J. M., El-Khordagui, L. K., Focarete, M. L., Maróti, P., Tóth, L., Pacilio, S., El-Habashy, S. E., Boateng, J. S., Catanzano, O., et al. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2024.06.012 · Cited by 64
Rajaram, K., Lee, J. H., Youn, J. K., Jang, T., Han, W. B., Yang, S. M., Shin, J., Ko, G., Kim, D., Han, S., et al. (2023) · Advanced Materials · doi:10.1002/adma.202307391 · Cited by 44
Rising role of 3D-printing in delivery of therapeutics for infectious disease
Kyser, A. J., Fotouh, B., Mahmoud, M. Y., & Frieboes, H. B. (2024) · Journal of Controlled Release · doi:10.1016/j.jconrel.2023.12.051 · Cited by 29
Tissue-engineered repair material for pelvic floor dysfunction
Lin, M., Lu, Y., & Chen, J. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.968482 · Cited by 33
Metadata
- Authors
- Ren, J., Murray, R., Wong, C. S., Qin, J., Chen, M., Totsika, M., Riddell, A. D., Warwick, A., Rukin, N., & Woodruff, M. A.
- Affiliations
- Queensland University of Technology (AU)
- The University of Queensland (AU)
- St Vincent's Hospital Melbourne (AU)
- Redcliffe Hospital (AU)
- Corresponding author
- Woodruff, Maria A.
- ORCID
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2022-02-16
- Volume
- 14
- Issue
- 4
- Pages
- 763
- ISSN
- 2073-4360 (ISSN-L)
- PMC
- PMC8877663
- OpenAlex
- W4213118871
- Cited by
- 42
- References
- 65
- Citations by year
- 2026: 9 · 2025: 12 · 2024: 13 · 2023: 7 · 2022: 1
- FWCI
- 2.06
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- QUT ePrints (Queensland University of Technology) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Metro North Hospital and Health Services; Queensland University of Technology (CRG 172-2019)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Electrospun Nanofibers in Biomedical Applications
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Health Sciences › Medicine › Urology › Pelvic floor disorders treatments
- Keywords
- pelvic organ prolapse, biodegradable mesh, polycaprolactone, polyethylene glycol, melt electrowriting, antimicrobial coatings, azithromycin, Staphylococcus aureus, mechanical properties, adipose-derived stem cells, biocompatibility, cytotoxicity, drug release
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.