The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Electrospraying, a Reproducible Method for Production of Polymeric Microspheres for Biomedical Applications
Open accessAbstract
The ability to reproducibly load bioactive molecules into polymeric microspheres is a challenge. Traditional microsphere fabrication methods typically provide inhomogeneous release profiles and suffer from lack of batch to batch reproducibility, hindering their potential to up-scale and their translation to the clinic. This deficit in homogeneity is in part attributed to broad size distributions and variability in the morphology of particles. It is thus desirable to control morphology and size of non-loaded particles in the first instance, in preparation for obtaining desired release profiles of loaded particles in the later stage. This is achieved by identifying the key parameters involved in particle production and understanding how adapting these parameters affects the final characteristics of particles. In this study, electrospraying was presented as a promising technique for generating reproducible particles made of polycaprolactone, a biodegradable, FDA-approved polymer. Narrow size distributions were obtained by the control of electrospraying flow rate and polymer concentration, with average particle sizes ranging from 10 to 20 µm. Particles were shown to be spherical with a homogeneous embossed texture, determined by the polymer entanglement regime taking place during electrospraying. No toxic residue was detected by this process based on preliminary cell work using DNA quantification assays, validating this method as suitable for further loading of bioactive components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033
Self-citationDisintegration of water drops in an electric field
Taylor, G. I. (1964) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1964.0151 · Cited by 3,305
XX. On the equilibrium of liquid conducting masses charged with electricity
Rayleigh, L. (1882) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786448208628425 · Cited by 1,825
Complexity in biomaterials for tissue engineering
Place, E. S., Evans, N. D., & Stevens, M. M. (2009) · Nature Materials · doi:10.1038/nmat2441 · Cited by 1,728
Polymer microspheres for controlled drug release
Freiberg, S., & Zhu, X. X. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2004.04.013 · Cited by 1,336
Shenoy, S. L., Bates, W. D., Frisch, H. L., & Wnek, G. E. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.011 · Cited by 1,209
Poly-ϵ-caprolactone microspheres and nanospheres: an overview
Sinha, V. R., Bansal, K., Kaushik, R., Kumria, R., & Trehan, A. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2004.01.044 · Cited by 1,100
Mundargi, R. C., Babu, V. R., Rangaswamy, V., Patel, P., & Aminabhavi, T. M. (2008) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.09.013 · Cited by 1,025
Micro/Nano encapsulation via electrified coaxial liquid jets
Loscertales, I. G., Barrero, A., Guerrero, I., Cortijo, R., Marquez, M., & Gañán-Calvo, A. M. (2002) · Science · doi:10.1126/science.1067595 · Cited by 1,017
Electrospraying route to nanotechnology: An overview
Jaworek, A., & Sobczyk, A. T. (2008) · Journal of Electrostatics · doi:10.1016/j.elstat.2007.10.001 · Cited by 963
Freitas, S., Merkle, H. P., & Gander, B. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.10.015 · Cited by 923
Controlled Delivery Systems for Proteins Based on Poly(Lactic/Glycolic Acid) Microspheres
Cohen, S., Yoshioka, T., Lucarelli, M., Hwang, L. H., & Langer, R. (1991) · Pharmaceutical Research · doi:10.1023/a:1015841715384 · Cited by 843
Zeleny, J. (1914) · Physical Review · doi:10.1103/physrev.3.69 · Cited by 834
Gupta, P., Elkins, C., Long, T. E., & Wilkes, G. L. (2005) · Polymer · doi:10.1016/j.polymer.2005.04.021 · Cited by 834
Crescenzi, V., Manzini, G., Calzolari, G., & Borri, C. (1972) · European Polymer Journal · doi:10.1016/0014-3057(72)90109-7 · Cited by 750
Polymer carriers for drug delivery in tissue engineering
Sokolsky-Papkov, M., Agashi, K., Olaye, A., Shakesheff, K., & Domb, A. J. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.001 · Cited by 452
Issues in long-term protein delivery using biodegradable microparticles
Ye, M., Kim, S., & Park, K. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.05.011 · Cited by 386
PLA Nano‐ and Microparticles for Drug Delivery: An Overview of the Methods of Preparation
Lassalle, V., & Ferreira, M. L. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700022 · Cited by 340
Zeleny, J. (1914) · Medical Entomology and Zoology · Cited by 309
Yang, Y.-Y., Chung, T.-S., Bai, X.-L., & Chan, W.-K. (2000) · Chemical Engineering Science · doi:10.1016/s0009-2509(99)00503-5 · Cited by 298
On the Equilibrium of Liquid Conducting Masses charged with Electricity
(2009) · Scientific Papers · doi:10.1017/cbo9780511703973.013 · Cited by 290
Controlling the morphology of electrospray-generated PLGA microparticles for drug delivery
Almería, B., Deng, W., Fahmy, T. M., & Gomez, A. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.10.002 · Cited by 277
Electrohydrodynamic atomization for biodegradable polymeric particle production
Xie, J., Lim, L. K., Phua, Y., Hua, J., & Wang, C.-H. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.06.037 · Cited by 251
Quent, V. M. C., Loessner, D., Friis, T., Reichert, J. C., & Hutmacher, D. W. (2010) · Journal of Cellular and Molecular Medicine · doi:10.1111/j.1582-4934.2010.01013.x · Cited by 215
Self-citationArya, N., Chakraborty, S., Dube, N., & Katti, D. S. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31085 · Cited by 192
XU, Y., & HANNA, M. (2006) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2006.03.046 · Cited by 166
Electrospray Encapsulation of Hydrophilic and Hydrophobic Drugs in Poly(L‐lactic acid) Nanoparticles
Valo, H., Peltonen, L., Vehviläinen, S., Karjalainen, M., Kostiainen, R., Laaksonen, T., & Hirvonen, J. (2009) · Small · doi:10.1002/smll.200801907 · Cited by 158
Xie, J., & Wang, C. (2007) · Biotechnology and Bioengineering · doi:10.1002/bit.21334 · Cited by 149
Production of Uniform-Sized Polymer Core−Shell Microcapsules by Coaxial Electrospraying
Hwang, Y. K., Jeong, U., & Cho, E. C. (2008) · Langmuir · doi:10.1021/la703546f · Cited by 97
Amsden, B. G., & Goosen, M. F. A. (1997) · Journal of Controlled Release · doi:10.1016/s0168-3659(96)01483-6 · Cited by 85
Polystyrene Microspheres and Nanospheres Produced by Electrospray
Fantini, D., Zanetti, M., & Costa, L. (2006) · Macromolecular Rapid Communications · doi:10.1002/marc.200600532 · Cited by 81
Electrosprayed polymer particles: Effect of the solvent properties
Park, C. H., & Lee, J. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30498 · Cited by 80
Electrohydrodynamic atomization of quasi-monodisperse drug-loaded spherical/wrinkled microparticles
Hong, Y., Li, Y., Yin, Y., Li, D., & Zou, G. (2008) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2008.02.004 · Cited by 80
Xu, Y., Skotak, M., & Hanna, M. A. (2006) · Journal of Microencapsulation · doi:10.1080/02652040500435048 · Cited by 73
Nie, H., Dong, Z., Arifin, D. Y., Hu, Y., & Wang, C. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32867 · Cited by 72
Microspheres containing insulin-like growth factor I for treatment of chronic neurodegeneration
Carrascosa, C., Torres‐Alemán, I., López-López, C., Carro, E., Espejo, L. A., Torrado, S., & Torrado, J. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00562-3 · Cited by 53
Meng, F., Jiang, Y., Sun, Z., Yin, Y., & Li, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30107 · Cited by 52
Polymeric particle formation through electrospraying at low atmospheric pressure
Wu, Y., Kennedy, S. J., & Clark, R. L. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31296 · Cited by 34
Cited by
Protein-Based Nanoparticles as Drug Delivery Systems
Hong, S., Choi, D. W., Kim, H. N., Park, C. G., Lee, W., & Park, H. H. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12070604 · Cited by 619
Engineering and Functionalization of Gelatin Biomaterials: From Cell Culture to Medical Applications
Bello, A. B., Kim, D., Kim, D., Park, H., & Lee, S.-H. (2020) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2019.0256 · Cited by 545
Electrospraying of polymers with therapeutic molecules: State of the art
Bock, N., Dargaville, T. R., & Woodruff, M. A. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.03.002 · Cited by 440
Self-citationA review on electrospun polymeric nanofibers: Production parameters and potential applications
Ibrahim, H. M., & Klingner, A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106647 · Cited by 402
Xie, J., Jiang, J., Davoodi, P., Srinivasan, M. P., & Wang, C.-H. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2014.08.061 · Cited by 317
Metadata
- Authors
- Bock, N., Woodruff, M. A., Hutmacher, D. W., & Dargaville, T. R.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2011-01-05
- Volume
- 3
- Issue
- 1
- Pages
- 131-149
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1977464265
- Cited by
- 326
- References
- 38
- FWCI
- 9.58
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.