Ring-Opening Polymerization—An Introductory Review
Open accessThe DOI matches its Crossref record; 188 of the 190 references it cites were found in a registry or an index; 1 of the 157 sources its claims cite were checked for support.
Abstract
This short, introductory review covers the field of ring opening polymerization and considers different groups of cyclic monomers and mechanisms.
Overview
CoChat Summary
TL;DR
This introductory review organizes ring-opening polymerization (ROP) by mechanism—radical, cationic, anionic, and metathesis—and surveys cyclic monomers, initiators, propagation, termination, and applications. It emphasizes that ROP is a broad, industrially important route to polymers, with ring strain and ring-chain equilibria as central driving and control factors.
Key findings
- ROP is one of the three main paths to polymers; industrial examples include polyacetals, polytetrahydrofurans, polysiloxanes, polyethylene oxide, Nylon 6, polyphosphazenes, and ROMP products such as Norsorex®, Vestenamer®, and Metton®.
- Ring strain drives many ROPs: vinyl cyclopropane has 115 kJ mol−1 ring strain and oxiranes 116 kJ mol−1, while 7- and 8-membered lactones and lactams have only ca. 6 J mol−1; strain-free six-membered rings generally do not polymerize.
- ROMP thermodynamics: cyclohexene has positive ΔG0 (cis 6.2, trans 7.3 kJ/mol) and cannot be polymerized by ROMP at room temperature, whereas cyclooctene and 1,5-cyclooctadiene have negative ΔG0 (e.g., cis −19.4 and −23.5 kJ/mol); ROMP has produced more than 5000 papers in the last 20 years.
- CROP can be accelerated up to 400-fold by microwave heating; CROP of 3-benzyl-1,3-oxazolidine-2-thione with BF3OEt2 gave initiator efficiency ca. 0.1 and Mw/Mn ca. 1.0; polyphosphazene polymerization avoids conversions much greater than 50% to minimize insoluble material.
Methods
- Design: introductory review organized by mechanism—radical ROP (RROP), cationic ROP (CROP), anionic ROP (AROP), and ring-opening metathesis polymerization (ROMP)—rather than by monomer classes.
- Data/sample: literature up to 2012; citations selected to refer to detailed reviews and key papers describing both latest developments and the evolution of the current state of the art.
- Analysis: narrative synthesis of mechanisms, initiators, propagation, termination, thermodynamics, and applications; no primary experimental data are reported.
Limitations
- Paper states: no attempt is made to describe the particularities of ROP thermodynamics; the review is selective and not exhaustive; polyphosphazene ring-opening mechanism is not understood in detail and an economically viable synthesis remains a challenge; ROP reactions are generally rather slow.
- Paper states: some mechanistic questions remain a matter for discussion, e.g., the CROP of cyclic siloxanes, and the 1,3-dioxolane propagation debate illustrates the need to examine experimental conditions carefully before concluding mechanisms.
- Evident: as a review, it provides no new experimental results or systematic quantitative meta-analysis; some figures and tables appear as images or incomplete renderings in the text.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
0 Valid · 11 Not valid · 87 Not checked · 59 Own results and interpretations
In the paper
“For rings containing disulfide, silicon or carbonate moieties an additional effect is the increased rotational freedom of these groups in the resulting linear chains which leads to an increase in entropy to give the driving force for polymerization [4].”
What the sources say
- Not matchedcites [4] Brunelle, D.J. (1993). Ring-Opening Polymerization, Hanser Publishers.
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
In the paper
“for most ROP the driving force is the ring strain and associated steric considerations.”
What the sources say
- Not checked — no full text of the sourcecites [1] Dubois, P., Coulembier, O., and Raquez, J-M. (2009). Handbook of Ring Opening Polymerisation, Wiley-VCH Verlag. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“Vinyl oxiranes yield polyethers via ROP [12 -14] (see Figure 3).”
What the sources say
- Not checked — no full text of the sourcecites [12] Cho, 1983, Exploratory ring-opening polymerization. XIII, Radical ring-opening polymerization of 2-phenyl-3-vinyloxirane: A C–C-Bond scission polymerization of the epoxide ring, J. Polym. Sci. Polym. Lett. source
- Not checked — no full text of the sourcecites [13] Ochiai, 2007, Computational evaluation of radical ring-opening polymerization, J. Polym. Sci. Polym. Chem. source
- Not checked — no full text of the sourcecites [14] Endo, 1985, Syntheses of 2-phenyl-3-vinyloxirane derivatives that undergo radical ring-opening polymerization, J. Polym. Sci. Polym. Chem. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Vinyl cyclobutanes can also undergo RROP [15] (see Figure 4).”
What the sources say
- Not checked — no full text of the sourcecites [15] Hiraguri, 1989, Synthesis and radical ring-opening polymerization of 1,2-dicarbomethoxy-3-vinylcyclobutane, J. Polym. Sci. Polym. Lett. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
None of the sources cited for this claim have been checked yet.
In the paper
“Rings composed of 3 -8 atoms may polymerize due to the loss of enthalpy associated with the loss of ring strain.”
What the sources say
- Not checked — no full text of the sourcecites [2] Matyjaszewski, K. (1996). Cationic Polymerizations, Marcel Dekker. source
- Not matchedcites [3] Brandrup, J., and Immergut, E.H. (1975). Polymer Handbook, John Wiley & Sons. [2nd].
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
75 more claims
Create a free account to see all 157 claims and to verify the 13 references still open.
- It may state two separate claims as one. 38
- Probably not a substantial claim. 50
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The PO ring opening reaction is exothermic [25]”
From Prospective techno-economic and environmental assessment of carbon capture at a refinery and CO2 utilisation in polyol synthesis (2017) · cites this paper as [25]
Experimental — accuracy not yet measuredIn the citing paper
“Cyclic monomers can polymerize by opening the ring system using metal catalysts [169].”
From Quaternary ammonium-based biomedical materials: State-of-the-art, toxicological aspects and antimicrobial resistance (2017) · cites this paper as [169]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 7. Ring-Opening Polymerization of Phosphazenes
“This reaction was first reported at the end of the 19th century by Liebig [162] and Stokes [163]”
§ References
“162. Liebig, J. Über Phosphorstickstoff. Ann. Chem. 1834 , 11 , 139.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 1. Introduction
“| Phosphonite | | 3,5 - 7 | Anionic |”
§ 6. Other Ring-Opening Polymerizations
“Cyclic phosphonites undergo an electrophilic ring-opening polymerization via an Arbuzov-type reaction to yield a polyphosphonate (Figure 62) [148].”
Citations
Cites
Scholl, M., Ding, S., Lee, C. W., & Grubbs, R. H. (1999) · Organic Letters · doi:10.1021/ol990909q · Cited by 3,467 · cited 1×
“A selection of ROMP catalysts [135–140].”
A Series of Well‐Defined Metathesis Catalysts–Synthesis of [RuCl2(CHR′)(PR3)2] and Its Reactions
Schwab, P., France, M. B., Ziller, J. W., & Grubbs, R. H. (1995) · Angewandte Chemie International Edition in English · doi:10.1002/anie.199520391 · Cited by 1,493
Olefin‐Metathesis Catalysts for the Preparation of Molecules and Materials (Nobel Lecture)
Grubbs, R. H. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200600680 · Cited by 1,147
Multi-colour organic light-emitting displays by solution processing
Müller, C. D., Falcou, A., Reckefuss, N., Rojahn, M., Wiederhirn, V., Rudati, P., Frohne, H., Nuyken, O., Becker, H., & Meerholz, K. (2003) · Nature · doi:10.1038/nature01390 · Cited by 1,110 · cited 1×
“, by spin-coating), dried and then photochemically crosslinked so that further coating is possible without dissolving the deposited film [71,72].”
Self-citationJean‐Louis Hérisson, P., & Chauvin, Y. (1971) · Die Makromolekulare Chemie · doi:10.1002/macp.1971.021410112 · Cited by 1,100
A Recyclable Ru-Based Metathesis Catalyst
Kingsbury, J. S., Harrity, J. P. A., Bonitatebus, P. J., & Hoveyda, A. H. (1999) · Journal of the American Chemical Society · doi:10.1021/ja983222u · Cited by 947
Multiple Metal–Carbon Bonds for Catalytic Metathesis Reactions (Nobel Lecture)
Schrock, R. R. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200600085 · Cited by 929 · cited 1×
“Schrock, Grubbs and Chauvin were honored with a Nobel Prize in 2005 for their synthetic and mechanistic work in this area [132–134].”
Love, J. A., Morgan, J. P., Trnka, T. M., & Grubbs, R. H. (2002) · Angewandte Chemie International Edition · doi:10.1002/1521-3773(20021104)41:21<4035::aid-anie4035>3.0.co;2-i · Cited by 920
Poly(2‐oxazoline)s: A Polymer Class with Numerous Potential Applications
Hoogenboom, R. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200901607 · Cited by 889
Buchmeiser, M. R. (2000) · Chemical Reviews · doi:10.1021/cr990248a · Cited by 796
Research works printed but not linked: 14
- Brandrup, J., and Immergut, E.H. (1975). Polymer Handbook, John Wiley & Sons. [2nd].
- Sadhir, R.K., and Luck, R.M. (1992). Expanding Monomers, CRC-Press.
- Matyjaszewski, K. (1996). Cationic Polymerizations, Marcel Dekker. · DOI · Paper page
- Goethals, E.J. (1984). Cationic Polymerization and Related Processes, Academic Press.
- Ostrovskii, 1970, Heat of ethylene oxide polymerization and kinetics of polymerization on solid potassium hydroxide, Dokl. Akad. Nauk. SSSR, 191, 1095
- Goethals, E.J. (1989). Telechelic Polymers: Synthesis and Applications, CRC Press.
- Lebedev, 1978, Thermodynamics of Poly(dimethyldisiloxane) in the Range of 0–350 K, Vysokomol. Soed. Ser. A, 20, 1297
- Verkade, J.G., and Quin, L.D. (1987). Phosphorus-31 NMR Spectroscopy in Stereochemical Analysis, Wiley VCH.
- Dubois, P., Coulombier, O., and Raquez, J.-M. (2009). Handbook of Ring-Opening Polymerization, Wiley-VCH. · DOI · Paper page
- Nuyken, O., Schneider, M., and Frenzel, U. (2012). Encyclopedia of Polymer Science and Technology, Wiley.
- Herisson, 1971, Catalysis of olefin transformation by tungsten complexes, telomerization of cyclic olefins in the presence of acyclic olefins, Makromol. Chem., 141, 161
- Allcock, H.R. (1972). Phosphorus-Nitrogen-Compounds, Academic Press.
- 1834, Über Phosphorstickstoff, Ann. Chem., 11, 139
- Stokes, 1897, Chloronitrides of phosphorus, Am. Chem. J., 19, 782
Cited by
Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., & Bikiaris, D. N. (2021) · Polymers · doi:10.3390/polym13111822 · Cited by 655
“,6, Scheme 5) and 1,5,7-Triazabicyclodec-5-ene (TBD) [66] as a guanidine type molecule are frequently applied to catalyze the ROP of lactide by this mechanism [64,67,68].”
BackgroundMethodJiao, Y., Niu, L.-N., Ma, S., Li, J., Tay, F. R., & Chen, J.-H. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.03.001 · Cited by 639
“Cyclic monomers can polymerize by opening the ring system using metal catalysts [169] .”
BackgroundWang, H., Sheng, L., Yasin, G., Wang, L., Xu, H., & He, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.08.014 · Cited by 410
Engineering Functional Polymer Capsules toward Smart Nanoreactors
Gaitzsch, J., Huang, X., & Voit, B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00241 · Cited by 397
Polymeric Delivery of Therapeutic Nucleic Acids
Kumar, R., Santa Chalarca, C. F., Bockman, M. R., Bruggen, C. V., Grimme, C. J., Dalal, R. J., Hanson, M. G., Hexum, J. K., & Reineke, T. M. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00997 · Cited by 365
In situ polymerization process: an essential design tool for lithium polymer batteries
Vijayakumar, V., Anothumakkool, B., Kurungot, S., Winter, M., & Nair, J. R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03527k · Cited by 365
Polymerization of Polar Monomers Mediated by Main-Group Lewis Acid–Base Pairs
Hong, M., Chen, J., & Chen, E. Y.-X. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00352 · Cited by 320
Metal–organic framework (MOF) materials as polymerization catalysts: a review and recent advances
Goetjen, T. A., Liu, J., Wu, Y., Sui, J., Zhang, X., Hupp, J. T., & Farha, O. K. (2020) · Chemical Communications · doi:10.1039/d0cc03790g · Cited by 306
Chakrabarty, A., & Teramoto, Y. (2018) · Polymers · doi:10.3390/polym10050517 · Cited by 302
“It is widely used for the production of many industrially-important polymers, like nylon 6, polynorbornene, polyphosphazene, polyethylene oxide, etc [117].”
BackgroundGautam, S., Guria, C., & Rajak, V. K. (2022) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2022.110318 · Cited by 233
Lignin-based polymers and nanomaterials
Grossman, A., & Vermerris, W. (2019) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2018.10.009 · Cited by 228
“As the name implies, ROP involves a polymerization reaction in which a cyclic molecule is opened, which creates a reactive group that can react with the next cyclic molecule [35].”
BackgroundCui, Y., Liang, X., Chai, J., Cui, Z., Wang, Q., He, W., Liu, X., Liu, Z., Cui, G., & Feng, J. (2017) · Advanced Science · doi:10.1002/advs.201700174 · Cited by 210
Hu, Y., Daoud, W., Cheuk, K., & Lin, C. (2016) · Materials · doi:10.3390/ma9030133 · Cited by 194
“As the reactive center of propagation, the terminal end of a polymer classifies the mechanism into anionic ROP, cationic ROP and radical ROP [13].”
BackgroundCationic Polymerization: From Photoinitiation to Photocontrol
Michaudel, Q., Kottisch, V., & Fors, B. P. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201701425 · Cited by 192
Mechanochemical Ruthenium-Catalyzed Olefin Metathesis
Do, J.-L., Mottillo, C., Tan, D., Štrukil, V., & Friščić, T. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00151 · Cited by 182
Espinoza, S. M., Patil, H. I., San Martin Martinez, E., Casañas Pimentel, R., & Ige, P. P. (2020) · International Journal of Polymeric Materials and Polymeric Biomaterials · doi:10.1080/00914037.2018.1539990 · Cited by 162
“perature have important effects on the microstructure of the products([71]).”
BackgroundMethodInfluentialRedox-Responsive Drug Delivery Systems: A Chemical Perspective
Abed, H., Abuwatfa, W. H., & Husseini, G. A. (2022) · Nanomaterials · doi:10.3390/nano12183183 · Cited by 175
“As its name suggests, ROP reactions involve the opening of cyclic monomeric units to react with terminal ends of other monomers to form polymeric chains and are of many types [136].”
BackgroundSynthetic polymers: A review of applications in drilling fluids
Davoodi, S., Al-Shargabi, M., Wood, D. A., Rukavishnikov, V. S., & Минаев, К. М. (2023) · Petroleum Science · doi:10.1016/j.petsci.2023.08.015 · Cited by 175
“Factors affecting RO include the rate and selectivity of RO can be in fl uenced by several factors, including the type of monomer, the initiator or catalyst, the solvent, temperature, and pressure (Nuyken and Pask, 2013; Takasu and Hayashi, 2015).”
Henschel, J., Peschel, C., Klein, S., Horsthemke, F., Winter, M., & Nowak, S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202000727 · Cited by 155
Shi, C., Clarke, R. W., McGraw, M. L., & Chen, E. Y. ‐. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c12278 · Cited by 149
Das, A., Babu, A., Chakraborty, S., Guyse, J. F. R. V., Hoogenboom, R., & Maji, S. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202402432 · Cited by 177
ICTAC Kinetics Committee recommendations for analysis of thermal polymerization kinetics
Vyazovkin, S., Achilias, D. S., Fernández‐Francos, X., Galukhin, A., & Sbirrazzuoli, N. (2022) · Thermochimica Acta · doi:10.1016/j.tca.2022.179243 · Cited by 155
Varlas, S., Lawrenson, S. B., Arkinstall, L. A., O’Reilly, R. K., & Foster, J. C. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101278 · Cited by 139
Gomri, C., Cretin, M., & Semsarilar, M. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119790 · Cited by 131
Huang, Z., Xiao, Z., Jin, R., Li, Z., Shu, C., Shi, R., Wang, X., Tang, Z., Tang, W., & Wu, Y. (2024) · Energy & Environmental Science · doi:10.1039/d4ee02060j · Cited by 117
Arya, A., & Sharma, A. L. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04434-8 · Cited by 110
Wright, T. A., Page, R. C., & Konkolewicz, D. (2018) · Polymer Chemistry · doi:10.1039/c8py01399c · Cited by 117
Design, Synthesis and Architectures of Hybrid Nanomaterials for Therapy and Diagnosis Applications
Macchione, M. A., Biglione, C., & Strumia, M. C. (2018) · Polymers · doi:10.3390/polym10050527 · Cited by 122
“Polymer chains can be synthetized using mainly ATRP [98], RAFT [99], ring-opening polymerization [100,101], among others.”
BackgroundFernández-Dacosta, C., van der Spek, M., Hung, C. R., Oregionni, G. D., Skagestad, R., Parihar, P., Gokak, D. T., Strømman, A. H., & Ramirez, A. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.08.005 · Cited by 104
“The PO ring opening reaction is exothermic [25] and the CO2 bond breaking is an endothermic reaction [26].”
Synthesis of block copolymers used in polymersome fabrication: Application in drug delivery
Hasannia, M., Aliabadi, A., Abnous, K., Taghdisi, S. M., Ramezani, M., & Alibolandi, M. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.11.010 · Cited by 109
Robert, C., Schmid, T. E., Richard, V., Haquette, P., Raman, S. K., Rager, M.-N., Gauvin, R. M., Morin, Y., Trivelli, X., Guérineau, V., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01749 · Cited by 101
Design and fabrication of hydrogel-based nanoparticulate systems for in vivo drug delivery
Lai, W., & He, Z. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.10.013 · Cited by 104
Venkataraman, S., Ng, V. W. L., Coady, D. J., Horn, H. W., Jones, G. O., Fung, T. S., Sardon, H., Waymouth, R. M., Hedrick, J. L., & Yang, Y. Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06355 · Cited by 97
Polyoxazoline: A review article from polymerization to smart behaviors and biomedical applications
Mahand, S. N., Aliakbarzadeh, S., Moghaddam, A., Moghaddam, A. S., Kruppke, B., Nasrollahzadeh, M., & Khonakdar, H. A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111484 · Cited by 118
Novel monomers for photopolymer networks
Lai, H., Peng, X., Li, L., Zhu, D., & Xiao, P. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101529 · Cited by 108
Blosch, S. E., Scannelli, S. J., Alaboalirat, M., & Matson, J. B. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00338 · Cited by 107
Thermoplastic matrix‐based composites produced by resin transfer molding: A review
Campos, B. M., Bourbigot, S., Fontaine, G., & Bonnet, F. (2022) · Polymer Composites · doi:10.1002/pc.26575 · Cited by 93
Recent advances in the ring-opening polymerization of sulfur-containing monomers
Purohit, V. B., Pięta, M., Pietrasik, J., & Plummer, C. M. (2022) · Polymer Chemistry · doi:10.1039/d2py00831a · Cited by 92
Main group metal polymerisation catalysts
Fazekas, E., Lowy, P. A., Rahman, M. A., Lykkeberg, A., Zhou, Y., Chambenahalli, R., & Garden, J. A. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00048b · Cited by 89
Xu, J., Wang, X., Liu, J., Feng, X., Gnanou, Y., & Hadjichristidis, N. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101484 · Cited by 93
Synthetic approaches for multiblock copolymers
Beyer, V. P., Kim, J., & Becer, C. R. (2020) · Polymer Chemistry · doi:10.1039/c9py01571j · Cited by 86
Bhaumik, A., Peterson, G. I., Kang, C., & Choi, T. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b05822 · Cited by 87
Si, G., & Chen, C. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00163-9 · Cited by 97
“Strain (%) DCPD DCPD(40)/recycle (1) DCPD(20)/recycle (1) DCPD(10)/recycle (1) DCPD(5)/recycle (1) a b”
Radical Cascade-Triggered Controlled Ring-Opening Polymerization of Macrocyclic Monomers
Huang, H., Sun, B., Huang, Y., & Niu, J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b05365 · Cited by 95
Heteroatom-containing degradable polymers by ring-opening metathesis polymerization
Xu, J., & Hadjichristidis, N. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101656 · Cited by 87
Rahme, K., & Dagher, N. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11070327 · Cited by 82
“The new formed species is now considered to be the nucleophile because the alkoxide ion of the opened ε-caprolactone has a stronger nucleophilic character than a partial negatively polarized nitrogen atom [31].”
BackgroundSynthetic Biomaterials from Metabolically Derived Synthons
Ricapito, N. G., Ghobril, C., Zhang, H., Grinstaff, M. W., & Putnam, D. A. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00465 · Cited by 86
Intensification of Polymerization Processes by Reactive Extrusion
Li, T., Feng, L., Gu, X., Zhang, C., Wang, P., & Hu, G. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c05078 · Cited by 83
Thermoresponsive Nanodevices in Biomedical Applications
Bergueiro, J., & Calderón, M. (2014) · Macromolecular Bioscience · doi:10.1002/mabi.201400362 · Cited by 85
Open Macromolecular Genome: Generative Design of Synthetically Accessible Polymers
Kim, S., Schroeder, C. M., & Jackson, N. E. (2023) · ACS Polymers Au · doi:10.1021/acspolymersau.3c00003 · Cited by 80
Nanogels: A chemically versatile drug delivery platform
Blagojevic, L., & Kamaly, N. (2025) · Nano Today · doi:10.1016/j.nantod.2025.102645 · Cited by 93
Advances and applications of block-copolymer-based nanoformulations
Agrahari, V., & Agrahari, V. (2018) · Drug Discovery Today · doi:10.1016/j.drudis.2018.03.004 · Cited by 78
Carborane-Containing Polymers: Synthesis, Properties, and Applications
Zhang, X. C., Rendina, L. M., & Müllner, M. (2023) · ACS Polymers Au · doi:10.1021/acspolymersau.3c00030 · Cited by 74
Miktoarm Star Polymers: Synthesis and Applications
Liu, M., Blankenship, J. R., Levi, A. E., Fu, Q., Hudson, Z. M., & Bates, C. M. (2022) · Chemistry of Materials · doi:10.1021/acs.chemmater.2c01220 · Cited by 77
Diebler, J., Komber, H., Häußler, L., Lederer, A., & Werner, T. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00728 · Cited by 76
Recent advances in light-regulated non-radical polymerisations
Lai, H., Zhang, J., Xing, F., & Xiao, P. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00731h · Cited by 72
Nifant’ev, I., & Ivchenko, P. (2019) · Molecules · doi:10.3390/molecules24224117 · Cited by 72
“The results of the modeling were confirm d by preferable fo mation of macr cyclic PLA in polymerization catalyzed by lix[8]arene-based dizirconium complex.”
BackgroundMethodResultInfluentialChen, G., Ye, L., Zhang, K., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124885 · Cited by 70
Bhatia, S. K., Bhatia, R. K., & Yang, Y.-H. (2016) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-016-9415-9 · Cited by 70
“Ring-opening polymerization is a form of chaingrowth where the terminal end of a polymer chain acts as a reactive center and other cyclic monomers react by opening its ring system to form a long polymer chain (Nuyken and Pask 2013).”
BackgroundNair, J. R., Shaji, I., Ehteshami, N., et al. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b04172 · Cited by 70
Sun, H. R., Yang, L., Thompson, M. P., Schara, S., Cao, W., Choi, W., Hu, Z., Zang, N., Tan, W., & Gianneschi, N. C. (2019) · Bioconjugate Chemistry · doi:10.1021/acs.bioconjchem.9b00166 · Cited by 67
Pharmaceutical and Biomedical Applications of Polymers
Deb, P. K., Kokaz, S. F., Abed, S. N., Paradkar, A. R., & Tekade, R. K. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-817909-3.00006-6 · Cited by 112
Synthesis and Properties of Poly-Ether/Ethylene Carbonate Electrolytes with High Oxidative Stability
Khan, K., Tu, Z., Zhao, Q. X., et al. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b02823 · Cited by 65
Bouncing and 3D printable hybrids with self-healing properties
Tallia, F., Russo, L., Li, S., Orrin, A. L. H., Shi, X., Chen, S., Steele, J. A. M., Meille, S., Chevalier, J., Lee, P. D., et al. (2018) · Materials Horizons · doi:10.1039/c8mh00027a · Cited by 67
Hu, Y., Daoud, W. A., Fei, B., Chen, L., Kwan, T. H., & Lin, C. S. K. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.067 · Cited by 65
Watson, S., Nie, M., Wang, L., & Stokes, K. R. (2015) · RSC Advances · doi:10.1039/c5ra17468f · Cited by 63
Deng, Y., Mehner, F., & Gaitzsch, J. (2023) · Macromolecular Rapid Communications · doi:10.1002/marc.202200941 · Cited by 67
Sustainable and Repulpable Barrier Coatings for Fiber-Based Materials for Food Packaging: A Review
Kathuria, A., & Zhang, S. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.929501 · Cited by 76
“Poly(ε-caprolactone) (PCL), a petroleum-derived flexible biodegradable aliphatic polyester with low Tg (−60°C) and Tm (55–70°C) is produced by ring-opening polymerization of εcaprolactone (ε-CL) (Detyothin et al., 2010).”
BackgroundInfluentialPascual, A., Sardón, H., Ruipérez, F., Gracia, R., Sudam, P., Veloso, A., & Mecerreyes, D. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27473 · Cited by 71
Piotrowska, U., & Sobczak, M. (2014) · Molecules · doi:10.3390/molecules20010001 · Cited by 61
“The ROP of cyclic esters can be performed in the presence of cationic or anionic initiators as well as metal coordinate and enzymatic catalysts [44–46].”
BackgroundMalekshah, R. E., Moharramnejad, M., Gharanli, S., et al. (2023) · ACS Omega · doi:10.1021/acsomega.3c02552 · Cited by 56
A road map on synthetic strategies and applications of biodegradable polymers
Meghana, M. C., Nandhini, C., Benny, L., George, L., & Varghese, A. (2022) · Polymer Bulletin · doi:10.1007/s00289-022-04565-9 · Cited by 64
“This dual monomer and initiator coordination form a reaction complex [33].”
Varanaraja, Z., Kim, J., & Becer, C. R. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110299 · Cited by 60
Santulli, F., D’Auria, I., Boggioni, L., Losio, S., Proverbio, M., Costabile, C., & Mazzeo, M. (2020) · Organometallics · doi:10.1021/acs.organomet.0c00016 · Cited by 58
Triazabicyclodecene: A versatile catalyst for polymer synthesis
Kim, J. G., Lee, G. S., & Lee, A. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230643 · Cited by 65
Updating radical ring-opening polymerisation of cyclic ketene acetals from synthesis to degradation
Folini, J., Murad, W., Mehner, F., Meier, W. P., & Gaitzsch, J. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109851 · Cited by 60
Jiang, H., Yang, C., Chen, M., Liu, X., Yin, L., You, Y., & Lu, J. B. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202300238 · Cited by 61
Laser Sintering Approaches for Bone Tissue Engineering
Dinoro, J., Paxton, N. C., Skewes, J., Yue, Z., Lewis, P., Thompson, R. G., Beirne, S., Woodruff, M. A., & Wallace, G. G. (2022) · Polymers · doi:10.3390/polym14122336 · Cited by 64
“PCL is produced by polymerisation of ε-caprolactone via cationic, anionic, or radical polymerisation methods [111,112].”
MethodBraun, O., Coquery, C., Kieffer, J., Blondel, F., Favero, C., Besset, C., Mesnager, J., Voelker, F., Delorme, C., & Matioszek, D. (2021) · Molecules · doi:10.3390/molecules27010042 · Cited by 60
Esmaeili, N., Zohuriaan‐Mehr, M. J., Salimi, A., et al. (2018) · Thermochimica Acta · doi:10.1016/j.tca.2018.04.013 · Cited by 52
Quan, S. M., Wei, J., & Diaconescu, P. L. (2017) · Organometallics · doi:10.1021/acs.organomet.7b00672 · Cited by 50
Morgenstern, J., Alvaradejo, G. G., Bluthardt, N., Beloqui, A., Delaittre, G., & Hubbuch, J. J. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01020 · Cited by 53
Venkataraman, S., Tan, J. P. K., Ng, V. W. L., Tan, E., Hedrick, J. L., & Yang, Y. Y. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b01463 · Cited by 54
Quo Vadis Carbanionic Polymerization?
Ντέτσικας, Κ., Ladelta, V., Bhaumik, S., & Hadjichristidis, N. (2022) · ACS Polymers Au · doi:10.1021/acspolymersau.2c00058 · Cited by 49
Recent developments in stimuli-responsive poly(ionic liquid)s
Banerjee, P., Anas, M., Jana, S., & Mandal, T. K. (2020) · Journal of Polymer Research · doi:10.1007/s10965-020-02091-8 · Cited by 50
Molecular bionics – engineering biomaterials at the molecular level using biological principles
Rodríguez‐Arco, L., Poma, A., Ruiz‐Pérez, L., Scarpa, E., Ngamkham, K., & Battaglia, G. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.10.044 · Cited by 49
Organocatalytic Cationic Ring-Opening Polymerization of a Cyclic Hemiacetal Ester
Neitzel, A. E., Haversang, T. J., & Hillmyer, M. A. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b03114 · Cited by 56
Park, I., Sun, H., Kim, S., Kim, Y., Kim, G. E., Lee, Y., Kim, T., Choi, H. R., Suhr, J., & Nam, J. (2019) · Scientific Reports · doi:10.1038/s41598-019-43296-2 · Cited by 46
Achiral and chiral metal-organic frameworks (MOFs) as an efficient catalyst for organic synthesis
Chauhan, N. P. S., Perumal, P., Chundawat, N. S., & Jadoun, S. (2025) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2025.216536 · Cited by 50
Continuous flow ring-opening polymerizations
Hu, X., Zhu, N., Fang, Z. D., & Guo, K. (2016) · Reaction Chemistry & Engineering · doi:10.1039/c6re00206d · Cited by 45
Polysaccharide-containing block copolymers: synthesis and applications
Volokhova, A. S., Edgar, K. J., & Matson, J. B. (2019) · Materials Chemistry Frontiers · doi:10.1039/c9qm00481e · Cited by 48
Polymer-grafted metal–organic frameworks: design, synthesis, and applications
Yang, X., Cheng, T.-C., & Morris, A. J. (2024) · Journal of Materials Chemistry C · doi:10.1039/d3tc03373b · Cited by 51
Photoinduced ring-opening polymerizations
Guy, N., Giani, O., Blanquer, S., Pinaud, J., & Robin, J. (2021) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2021.106159 · Cited by 53
Knox, S. T., & Warren, N. J. (2020) · Reaction Chemistry & Engineering · doi:10.1039/c9re00474b · Cited by 42
Rupf, S. M., Pröhm, P., & Plajer, A. J. (2022) · Chemical Science · doi:10.1039/d2sc01776h · Cited by 42
Rizzo, A., Peterson, G. I., Bhaumik, A., Kang, C., & Choi, T. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202012544 · Cited by 45
Chemo-enzymatic routes towards the synthesis of bio-based monomers and polymers
Ahmed, S. T., Leferink, N. G. H., & Scrutton, N. S. (2019) · Molecular Catalysis · doi:10.1016/j.mcat.2019.01.036 · Cited by 43
“Kobayashi and co-workers used 36 as a substrate for lipase catalyzed ROP to obtain poly-36 with an Mn of 8.4 kg mol –1.”
BackgroundInfluentialEnzymatic Degradation of Star Poly(ε-Caprolactone) with Different Central Units
Blackwell, C. J., Haernvall, K., Guebitz, G. M., Groombridge, M., Gonzales, D., & Khosravi, E. (2018) · Polymers · doi:10.3390/polym10111266 · Cited by 47
“It can be synthesised by the facile ring-opening polymerisation (ROP) of ε-caprolactone (ε-CL) using a nucleophilic initiator such as hydroxyl groups and catalysed by FDA-approved tin (II) ethyl hexanoate (SnOct2) [4,5].”
MethodNovel Zinc-Catalytic Systems for Ring-Opening Polymerization of ε-Caprolactone
Żółtowska, K., Sobczak, M., & Olędzka, E. (2015) · Molecules · doi:10.3390/molecules20022816 · Cited by 43
“For example, zinc lactate gives good toxicological results [14,16–19], whereas zinc acetate turns out to be a friendly analogue of tin(II) 2-ethylhexanoate [14,20].”
BackgroundUrbaniak, T., & Musiał, W. (2019) · Nanomaterials · doi:10.3390/nano9091240 · Cited by 41
“Active pharmaceutical ingredient can be employed as initiator, resulting in drug-tagged polymer chains formation [32].”
Background
Metadata
- Authors
- Nuyken, O., & Pask, S.
- Affiliations
- Technical University of Munich (DE)
- SteDaPa Consulting, Im Gerstenfeld 44, Dormagen D-41542, Germany
- Corresponding author
- Nuyken, Oskar
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2013-04-25
- Volume
- 5
- Issue
- 2
- Pages
- 361-403
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W2113692324
- Cited by
- 456
- References
- 190
- Citations by year
- 2026: 31 · 2025: 37 · 2024: 49 · 2023: 36 · 2022: 38 · 2021: 39 · 2020: 43 · 2019: 49 · 2018: 31 · 2017: 29 · 2016: 31 · 2015: 26 · 2014: 16 · 2013: 1
- FWCI
- 9.41
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Physical Sciences › Chemistry › Organic Chemistry › Synthetic Organic Chemistry Methods
- Keywords
- ring-opening polymerization, radical ring-opening polymerization, cationic ring-opening polymerization, anionic ring-opening polymerization, ring-opening metathesis polymerization, cyclic monomers, cyclic olefins, cyclic ethers, cyclic thioethers, cyclic amines, cyclic lactones, cyclic disulfides, cyclic anhydrides, cyclic carbonates, phosphazenes, phosphonites, polymerization mechanism
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-08, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-08 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.