Overview and Evaluation of Bluetooth Low Energy: An Emerging Low-Power Wireless Technology
Open accessThe DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
Bluetooth Low Energy (BLE) is an emerging low-power wireless technology developed for short-range control and monitoring applications that is expected to be incorporated into billions of devices in the next few years. This paper describes the main features of BLE, explores its potential applications, and investigates the impact of various critical parameters on its performance. BLE represents a trade-off between energy consumption, latency, piconet size, and throughput that mainly depends on parameters such as connInterval and connSlaveLatency. According to theoretical results, the lifetime of a BLE device powered by a coin cell battery ranges between 2.0 days and 14.1 years. The number of simultaneous slaves per master ranges between 2 and 5,917. The minimum latency for a master to obtain a sensor reading is 676 µs, although simulation results show that, under high bit error rate, average latency increases by up to three orders of magnitude. The paper provides experimental results that complement the theoretical and simulation findings, and indicates implementation constraints that may reduce BLE performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2. Theoretical lifetime of a slave for one-way and round-trip ATT message exchanges, and for different parameter configurations, based on CC2540 current measurements [11].](https://figures.cochat.ai/paper-figures/02304470230d427db90ed7f88e88237c/overview-and-evaluation-of-bluetooth-low-energy-an-emerging-low-power-wireless-figure-2.jpg)






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Haartsen, J. C. (2000) · IEEE Personal Communications · doi:10.1109/98.824570 · Cited by 643 · cited 1×
“BLE PROTOCOL STACK OVERVIEW Like in classic Bluetooth [7], the BLE protocol stack is composed of two main parts: the Controller and the Host.”
BackgroundApplications, challenges, and prospective in emerging body area networking technologies
Patel, M., & Wang, J. (2010) · IEEE Wireless Communications · doi:10.1109/mwc.2010.5416354 · Cited by 638 · cited 1×
“Healthcare, wellness and sports constitute an application domain where classic Bluetooth has already been used [14,15], and for which BLE constitutes an improvement [16].”
BackgroundWireless home automation networks: A survey of architectures and technologies
Gomez, C., & Paradells, J. (2010) · IEEE Communications Magazine · doi:10.1109/mcom.2010.5473869 · Cited by 557 · cited 1×
“been steadily gaining momentum in application domains that require multihop networking [2, 3].”
BackgroundSelf-citationMan-in-the-Middle Attack to the HTTPS Protocol
Callegati, F., Cerroni, W., & Ramilli, M. (2009) · IEEE Security & Privacy Magazine · doi:10.1109/msp.2009.12 · Cited by 347 · cited 1×
“When none of the first two methods can be used, the Just Works method is employed, although it is not authenticated and it does not provide protection against Man In The Middle (MITM) attacks [10].”
MethodExtending IP to Low-Power, Wireless Personal Area Networks
Hui, J. W., & Culler, D. E. (2008) · IEEE Internet Computing · doi:10.1109/mic.2008.79 · Cited by 280 · cited 1×
“In fact, the IETF 6LoWPAN Working Group (WG) [5] has already recognized the importance of BLE for the Internet of Things.”
BackgroundConnecting low-power and lossy networks to the internet
Ko, J., Terzis, A., Dawson-Haggerty, S., Culler, D. E., Hui, J. W., & Levis, P. (2011) · IEEE Communications Magazine · doi:10.1109/mcom.2011.5741163 · Cited by 207 · cited 1×
“While delivery delay may be tolerated for certain sensor measurement reading applications, a user that presses a button in a remote control is sensitive to delays greater than 500 ms [12].”
BackgroundReliability and Availability Evaluation of Wireless Sensor Networks for Industrial Applications
Silva, I., Guedes, L. A., Portugal, P., & Vasques, F. (2012) · Sensors · doi:10.3390/s120100806 · Cited by 189 · cited 1×
“4e specification [21].”
Continua: An Interoperable Personal Healthcare Ecosystem
Carroll, R., Cnossen, R., Schnell, M., & Simons, D. (2007) · IEEE Pervasive Computing · doi:10.1109/mprv.2007.72 · Cited by 159 · cited 1×
“In fact, the Continua Health Alliance, an industry coalition of healthcare and technology companies [17], announced the selection of BLE for “activity monitors and heart rate sensors to be used to monitor a user‟s health and fitness levels” [18].”
BackgroundBluetooth low energy: Wireless connectivity for medical monitoring
Omre, A. H., & Keeping, S. (2010) · Journal of Diabetes Science and Technology · doi:10.1177/193229681000400227 · Cited by 96 · cited 1×
“In fact, the Continua Health Alliance, an industry coalition of healthcare and technology companies [17], announced the selection of BLE for “activity monitors and heart rate sensors to be used to monitor a user‟s health and fitness levels” [18].”
BackgroundA Decentralized Scheduling Algorithm for Time Synchronized Channel Hopping
Tinka, A., Watteyne, T., & Pister, K. S. J. (2010) · Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering · doi:10.1007/978-3-642-17994-5_14 · Cited by 93
Cited by
Items 101–200 of 969
Paek, J., Ko, J., & Shin, H. (2016) · Mobile Information Systems · doi:10.1155/2016/8367638 · Cited by 74
“Bluetooth Low Energy (BLE) is an extension of the Bluetooth standard in version 4.0 that enables low-power low-cost short-range wireless communication [1, 2].”
BackgroundInfluentialFuture Industrial Applications: Exploring LPWAN-Driven IoT Protocols
Islam, M. N., Jamil, H. M. M., Pranto, S. A., Das, R. K., Amin, A., & Khan, A. A. (2024) · Sensors · doi:10.3390/s24082509 · Cited by 100
“…and Encryption [34] AES 256 [35] AES 256 [35] AES-128 and CCM [33] Modulation CSS [23] DBPSK, GFSK [23] QPSK [17] QPSK, 16-QAM and 64-QAM [42] BFSK [50] Battery life time (Years) >10 [36] >10 [36] >10 [32] 10 [32] >10 [51] Link budget (db) 154 [16] 159 [12] 151 [47] 146 [47] 101 [52] compared to…”
Whaiduzzaman, M., Hossain, M. R., Shovon, A. R., Roy, S., Lászka, Á., Buyya, R., & Barros, A. (2020) · IEEE Journal of Biomedical and Health Informatics · doi:10.1109/jbhi.2020.3026060 · Cited by 74
“on Attribute Protocol (ATT), which uses 128-bit unique ID [30].”
MethodCOVID-19 and Your Smartphone: BLE-Based Smart Contact Tracing
Ng, P. C., Spachos, P., & Plataniotis, K. N. (2021) · IEEE Systems Journal · doi:10.1109/jsyst.2021.3055675 · Cited by 73
“xamined, to investigate the feasibility of the system under different realistic conditions. B. Bluetooth Low Energy (BLE) Technology BLE provides a short-range communication over the 2.4 GHz ISM band [20]. It is ubiquitous and has been adopted by many smart devices (e.g., smartwatches, earphones, smart thermostats, et…”
BackgroundInfluentialDon't Bother Me. I'm Socializing! A Breakpoint-Based Smartphone Notification System
Park, C., Lim, J., Kim, J., Lee, S.-J., & Lee, D. (2017) · ACM Conference on Computer Supported Cooperative Work (CSCW) · doi:10.1145/2998181.2998189 · Cited by 93
“, pairing or connecting to an access point) from the user and is energy-friendly [12].”
BackgroundData Transmission Efficiency in Bluetooth Low Energy Versions
Bulić, P., Kojek, G., & Biasizzo, A. (2019) · Sensors · doi:10.3390/s19173746 · Cited by 79
“In this context, energy-efficient short-range wireless communication technologies have become a hot topic for research and development [2].”
BackgroundHeterogeneous Network Access and Fusion in Smart Factory: A Survey
Xia, D., Jiang, C. S., Wan, J., Jin, J., Leung, V. C. M., & Martínez-García, M. (2022) · ACM Computing Surveys · doi:10.1145/3530815 · Cited by 81
“It presents the advantages of simple installation, easy configuration, centralized media access control, strong antiinterference ability, and low power consumption [57, 58].”
BackgroundUtilizing an Ingestible Biosensor to Assess Real-Time Medication Adherence
Chai, P. R., Castillo‐Mancilla, J., Buffkin, E., Darling, C. E., Rosen, R. K., Horvath, K. J., Boudreaux, E. D., Robbins, G. K., Hibberd, P. L., & Boyer, E. W. (2015) · Journal of Medical Toxicology · doi:10.1007/s13181-015-0494-8 · Cited by 74
“ment of RFID receivers [14, 15].”
A Bluetooth Low Energy real-time protocol for Industrial Wireless mesh Networks
Patti, G., Leonardi, L., & Bello, L. L. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793093 · Cited by 69
“Another analytical model for calculating the maximum throughput of BLE was presented in [4], while the work in [5] analyzed and used a simulation tool to estimate the speed and latency of BLE communications.”
MethodA BLE RSSI ranking based indoor positioning system for generic smartphones
Ma, Z., Poslad, S., Bigham, J., Zhang, X., & Men, L. (2017) · Wireless Telecommunications Symposium · doi:10.1109/wts.2017.7943542 · Cited by 69
Fu, H., Sharif-Khodaei, Z., & Aliabadi, M. H. F. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.03.050 · Cited by 68
“With the development 6 in sensing, communication and power systems [6, 7, 8], SHM has been increasingly considered, adopted and imple7 mented in many industrial applications, especially in the era of the Industrial Internet of Things [9, 10].”
BackgroundEvolution of Bluetooth Technology: BLE in the IoT Ecosystem
Koulouras, G., Katsoulis, S., & Zantalis, F. (2025) · Sensors · doi:10.3390/s25040996 · Cited by 91
“Gomez et al. provided an early overview and evaluation of BLE, highlighting its potential as an emerging low-power wireless technology [1].”
Making urban water smart: the SMART-WATER solution
Antzoulatos, G. S., Mourtzios, C., Stournara, P., Kouloglou, I.-O., Papadimitriou, N., Spyrou, D., Mentes, A. K., Nikolaidis, E., Καρακώστας, Α., Kourtesis, D., et al. (2020) · Water Science & Technology · doi:10.2166/wst.2020.391 · Cited by 69
Bluetooth Low Energy performance and robustness analysis for Inter-Vehicular Communications
Bronzi, W., Frank, R., Castignani, G., & Engel, T. (2015) · Ad Hoc Networks · doi:10.1016/j.adhoc.2015.08.007 · Cited by 65
Performance analysis of device discovery of Bluetooth Low Energy (BLE) networks
Cho, K., Park, G., Cho, W., Seo, J., & Han, K. (2015) · Computer Communications · doi:10.1016/j.comcom.2015.10.008 · Cited by 65
Is Fragmentation a Threat to the Success of the Internet of Things?
Aly, M., Khomh, F., Guéhéneuc, Y., Washizaki, H., & Yacout, S. (2018) · IEEE Internet of Things Journal · doi:10.1109/jiot.2018.2863180 · Cited by 80
Modeling the Maximum Throughput of Bluetooth Low Energy in an Error-Prone Link
Gómez, C., Demirkol, I., & Paradells, J. (2011) · IEEE Communications Letters · doi:10.1109/lcomm.2011.092011.111314 · Cited by 64
Self-citationJiang, P., Zhao, S., & Zhu, R. (2015) · Sensors · doi:10.3390/s151229881 · Cited by 68
“Bluetooth Low Energy (BLE) is an emerging low-power wireless technol gy developed f r short-rang c mmunication and monitoring applications that is expected to be incorporated into billions of devices in the next few years [26].”
BackgroundWireless Middleware Solutions for Smart Water Metering
Alvisi, S., Casellato, F., Franchini, M., Govoni, M., Luciani, C., Poltronieri, F., Riberto, G., Stefanelli, C., & Tortonesi, M. (2019) · Sensors · doi:10.3390/s19081853 · Cited by 64
“Bluetooth LE is a relatively recent and non backwards compatible version of Bluetooth specification, featuring increased communication range (up to 100 m) and lower power consumption, albeit at the expense of a lower maximum bitrate (1 Mbps) [18].”
BackgroundA wearable IoT aldehyde sensor for pediatric asthma research and management
Li, B., Dong, Q., Downen, R. S., Tran, N. A., Jackson, J. H., Pillai, D. K., Zaghloul, M. E., & Li, Z. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.02.077 · Cited by 72
“It is currently estimated that billions of devices are BLE-ready across the globe [41].”
BackgroundComparative analysis of the Bluetooth Low-Energy indoor positioning systems
Čabarkapa, D., Grujic, I., & Pavlović, P. D. (2015) · International Conference on Telecommunication in Modern Satellite, Cable and Broadcasting Services · doi:10.1109/telsks.2015.7357741 · Cited by 62
“GAP is very important protocol because allows BLE devices to interoperate with each other and provides a framework that any BLE implementation must follow to allow devices to discover each other, broadcast data, establish secure connections, and perform other operations [4].”
BackgroundMethodSegmentation of the ECG Signal by Means of a Linear Regression Algorithm
Aspuru, J., Ochoa-Brust, A. M., Félix, R. A., Mata-López, W. A., Mena, L. J., Ostos, R., & Martínez-Peláez, R. (2019) · Sensors · doi:10.3390/s19040775 · Cited by 64
“The ReadBEAR LABs BlendMicro that combined the Atmel ATmega32U4 microcontroller with a BLE module (Nordic nRF8001, Nordic Semiconductor, Trondheim, Noruega) [31,32] was used as an MCU to process the signal through its built-in ADC and transmit the information via Bluetooth.”
MethodInfluentialEnergy Efficiency in Short and Wide-Area IoT Technologies—A Survey
Zanaj, E., Caso, G., Nardis, L. D., Mohammadpour, A., Alay, Ö., & Benedetto, M. D. (2021) · Technologies · doi:10.3390/technologies9010022 · Cited by 72
“Out of these channels, three are the so-called Advertising Channels, used for device discovery, connection establishment, and broadcast transmissions; the remaining channels are Data Channels, used for bidirectional data exchange [46,47].”
BackgroundHwang, I., & Jang, Y. J. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2692961 · Cited by 60
“person’s position [18].”
Li, H., Yang, X., Wang, F., Rose, T. M., Chan, G., & Dong, S. S. (2015) · Safety Science · doi:10.1016/j.ssci.2015.11.025 · Cited by 63
Smart, Secure, Yet Energy-Efficient, Internet-of-Things Sensors
Akmandor, A. O., Yin, H., & Jha, N. K. (2018) · IEEE Transactions on Multi-Scale Computing Systems · doi:10.1109/tmscs.2018.2864297 · Cited by 72
“It provides short-range communication in the 2.4 GHz Industrial Scientific Medical (ISM) band [67].”
BackgroundInfluentialRole of Internet of Things (IoT) and Crowdsourcing in Smart City Projects
Shahrour, I., & Xie, X. (2021) · Smart Cities · doi:10.3390/smartcities4040068 · Cited by 68
“At the same time, the latter refers to various technologies such as WIFI, radio, LP-WAN (Low-Power Wide-Area Network) including LoRa and Sigfox (LoRa 2020, Sigfix 2020) [54,55], Bluetooth (Gomez et al., 2012) [56], Li-Fi (Light Fidelity), and 2G, 3G, 4G, and 5G connections (Eiaz et al., 2016) [57].”
BackgroundInfluentialHughes, J., Yan, J., & Soga, K. (2015) · International Journal on Smart Sensing and Intelligent Systems · doi:10.21307/ijssis-2017-811 · Cited by 57
“GATT transactions allow the transfer of data from a peripheral device to a central device, using a Bluetooth stack with three high-level objects: profiles, services and characteristics [20].”
MethodPostoperative Remote Automated Monitoring: Need for and State of the Science
McGillion, M. H., Duceppe, E., Allan, K. S., Marcucci, M., Yang, S. S., Johnson, A. P., Ross-Howe, S., Peter, E. H., Scott, T., Ouellette, C., et al. (2018) · Canadian Journal of Cardiology · doi:10.1016/j.cjca.2018.04.021 · Cited by 69
“Cellular capabilities allow built-in wireless transfer capabilities but could be expensive if a wearable device transfers significant amounts of raw sensor data.(24) Striking a balance between alarm fatigue and missed events is also an important consideration.”
Bluetooth Mesh Energy Consumption: A Model
Darroudi, S. M., Sànchez, R. C., & Gómez, C. (2019) · Sensors · doi:10.3390/s19051238 · Cited by 57
“BLE is defined by the Bluetooth core specifications as a layered protocol stack [1].”
BackgroundMethodPuckdeevongs, A., Tripathi, N. K., Witayangkurn, A., & Saengudomlert, P. (2020) · Information · doi:10.3390/info11060329 · Cited by 56
“A challenge with this technique is that obstacles or attenuations in the target area can significantly affect the estimation or the RSSI value at the receiver [26].”
MethodInfluentialAdvertisement Interval to Minimize Discovery Time of Whole BLE Advertisers
Shan, G., & Roh, B. (2018) · IEEE Access · doi:10.1109/access.2018.2817343 · Cited by 56
“Lowering energy consumption during the BLE NDP is also one of the most important key design requirements for BLE-enabled IoT applications.”
BackgroundInfluentialEnhanced Hydroponic Agriculture Environmental Monitoring: An Internet of Things Approach
Marques, G., Aleixo, D., & Pitarma, R. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-22744-9_51 · Cited by 55
“BLE is a low-power wireless technology for single-hop communication which can be assumed as a significant approach for IoT [21].”
BackgroundA practical study on Bluetooth Low Energy (BLE) throughput
Dian, F. J., Yousefi, A., & Lim, S. (2018) · IEEE Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON) · doi:10.1109/iemcon.2018.8614763 · Cited by 53
“The methods proposed in [8-10] use identical modules for master and slave devices, while the method in [11] does not use identical modules.”
BackgroundMethodMoving Towards Body-to-Body Sensor Networks for Ubiquitous Applications: A Survey
Meharouech, A., Elias, J., & Mehaoua, A. (2019) · Journal of Sensor and Actuator Networks · doi:10.3390/jsan8020027 · Cited by 65
Estimating SoC, SoH, or RuL of Rechargeable Batteries via IoT: A Review
Bokstaller, J., Schneider, J., & Brocke, J. V. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3342367 · Cited by 56
“S OURCES : [100], [101], [102] 10 m, while WiFi (802.11b) supports an outdoor range of up to 92 m.”
BackgroundBF-IoT: Securing the IoT Networks via Fingerprinting-Based Device Authentication
Gu, T., & Mohapatra, P. (2018) · 2018 IEEE 15th International Conference on Mobile Ad Hoc and Sensor Systems (MASS) · doi:10.1109/mass.2018.00047 · Cited by 49
“Blue-tooth low energy (BLE) [6] dominates in the IoT world due to its low energy consumption which increases the lifetime of the service provision [7].”
BackgroundResource discovery techniques in the internet of things: A review
Khalil, K., Elgazzar, K., Seliem, M., & Bayoumi, M. (2020) · Internet of Things · doi:10.1016/j.iot.2020.100293 · Cited by 54
Decades of Internet of Things Towards Twenty-first Century: A Research-Based Introspective
Nagajayanthi, B. (2021) · Wireless Personal Communications · doi:10.1007/s11277-021-09308-z · Cited by 61
“BLE Dual-mode has low power and uses Gaussian Frequency shift keying for range extension [42].”
MethodSmart home gateway system over Bluetooth low energy with wireless energy transfer capability
Galinina, O., Mikhaylov, K., Andreev, S. D., Turlikov, A. M., & Koucheryavy, Y. A. (2015) · EURASIP Journal on Wireless Communications and Networking · doi:10.1186/s13638-015-0393-3 · Cited by 51
“4 GHz band and has inherited some features of the classical Bluetooth, the two technologies are not compatible [5, 6].”
BackgroundResource-Aware Distributed Epilepsy Monitoring Using Self-Awareness From Edge to Cloud
Forooghifar, F., Aminifar, A., & Atienza, D. (2019) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2019.2951222 · Cited by 58
“Bluetooth Low Energy (BLE): To communicate between edge and fog, we use BLE protocol [37], which is a lowpower protocol suitable for short distance communications.”
MethodArtificial-Intelligence-Enhanced Mobile System for Cardiovascular Health Management
Fu, Z., Hong, S., Zhang, R., & Du, S. (2021) · Sensors · doi:10.3390/s21030773 · Cited by 64
“The BLE is used to transmit data from the hardware device to the mobile phone and provides considerably reduced power consumption and cost while maintaining a similar communication range [18].”
MethodA preliminary study of low power wireless technologies: ZigBee and Bluetooth Low Energy
Lee, J., Dong, M., & Sun, Y.-H. (2015) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2015.7334098 · Cited by 50
“Thus, several wireless communication solutions have been developed to enable objects transferring small amount of messages to the Internet under low-power requirements.”
BackgroundZhang, H., Du, W., Zhou, P., Li, M., & Mohapatra, P. (2016) · ACM Annual International Conference on Mobile Computing and Networking (MobiCom) · doi:10.1145/2973750.2973775 · Cited by 50
“Human proximity detection based schemes like BLE or NFC [5,6] give another indicator.”
BackgroundFirmXRay: Detecting Bluetooth Link Layer Vulnerabilities From Bare-Metal Firmware
Wen, H., Lin, Z., & Zhang, Y. (2020) · ACM SIGSAC Conference on Computer and Communications Security (CCS) · doi:10.1145/3372297.3423344 · Cited by 72
“, [30, 34, 44, 48, 63]), we particularly focus on those caused by the vulnerabilities at the BLE link layer, which is responsible for broadcast, pairing, and encryption.”
BackgroundAn investigation of Bluetooth security vulnerabilities
Cope, P., Campbell, J., & Hayajneh, T. (2017) · 2017 IEEE 7th Annual Computing and Communication Workshop and Conference (CCWC) · doi:10.1109/ccwc.2017.7868416 · Cited by 47
Internet of Things based Durability Monitoring and Assessment of Reinforced Concrete Structures
Taffese, W. Z., Nigussie, E., & Isoaho, J. (2019) · Procedia Computer Science · doi:10.1016/j.procs.2019.08.096 · Cited by 49
“Short-range wireless communication technologies, such as ZigBee [22], Bluetooth Low Energy (BLE) [23], and WirelessHART [24], require multi-hop mesh networking to cover a larger area.”
BackgroundIndoor Positioning System using Bluetooth Low Energy
Kalbandhe, A. A., & Patil, S. C. (2016) · International Conference on Computing, Analytics and Security Trends · doi:10.1109/cast.2016.7915011 · Cited by 50
“advertising, scanning and initiating [8].”
MethodBLE device indoor localization based on RSS fingerprinting mapped by propagation modes
Pelant, J., Tlamsa, Z., Benes, V., Polák, L., Kaller, O., Bolecek, L., Kufa, J., Šebesta, J., & Kratochvíl, T. (2017) · International Conference Radioelektronika · doi:10.1109/radioelek.2017.7937584 · Cited by 49
Lightweight CoAP-Based Bootstrapping Service for the Internet of Things
García-Carrillo, D., & Marín-López, R. (2016) · Sensors · doi:10.3390/s16030358 · Cited by 47
“These are typically based on low power radio technologies [4] such as IEEE 802.15.4 [5] or Bluetooth Smart [6].”
BackgroundInfluentialA lightweight cyber security framework with context-awareness for pervasive computing environments
Al-Muhtadi, J. F., Saleem, K., Al-Rabiaah, S., Imran, M. A., Gawanmeh, A., & Rodrigues, J. J. P. C. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2020.102610 · Cited by 47
Load balancing for RPL-based Internet of Things: A review
Pancaroglu, D., & Şen, S. (2021) · Ad Hoc Networks · doi:10.1016/j.adhoc.2021.102491 · Cited by 47
MicroServices Suite for Smart City Applications
Badii, C., Bellini, P., Difino, A., Nesi, P., Pantaleo, G., & Paolucci, M. (2019) · Sensors · doi:10.3390/s19214798 · Cited by 50
Brunelli, D., Farella, E., Giovanelli, D., Milosevic, B., & Minakov, I. (2016) · IEEE Sensors Journal · doi:10.1109/jsen.2016.2596712 · Cited by 48
“level [27], [28].”
A Categorization of Discovery Technologies for the Internet of Things
Bröring, A., Datta, S. K., & Bonnet, C. (2016) · International Conference on the Internet of Things (IoT) · doi:10.1145/2991561.2991570 · Cited by 45
“However, optical markers are in general different from technologies such as NFC or BLE, as they only allow to receive more information about a tagged thing, but not to discover a thing.”
BackgroundInfluentialBluetooth Low Energy (BLE) based geomarketing system
Zaim, D., & Bellafkih, M. (2016) · International Conference on Intelligent Systems: Theories and Applications · doi:10.1109/sita.2016.7772263 · Cited by 45
“BLE enables smaller form factors, better power optimization, and the ability to operate on a small power cell for several years The table (Figure 2) below shows a comparison between Bluetooth Low Energy and Classic Bluetooth: In addition to its ultra-low power consumption [7], BLE has a huge number…”
BackgroundMining user reviews of COVID contact-tracing apps: An exploratory analysis of nine European apps
Garousi, V., Cutting, D., & Felderer, M. (2021) · Journal of Systems and Software · doi:10.1016/j.jss.2021.111136 · Cited by 46
“The framework/API is a decentralized reporting-based protocol built on a combination of Bluetooth Low Energy (BLE) technology (Gomez et al., 2012) and privacy-preserving cryptography.”
A comparative analysis of BLE and 6LoWPAN for U-HealthCare applications
Tabish, R., Mnaouer, A. B., Touati, F., & Ghaleb, A. M. (2013) · IEEE GCC Conference and Exhibition (GCCCE) · doi:10.1109/ieeegcc.2013.6705791 · Cited by 44
“Another feature that is dropped from earlier Bluetooth version in the BLE L2CAP is segmentation and reassembly under the assumption that higher layer protocols provide PDUs that fit into the maximum L2CAP payload size, which is equal to 23 bytes in BLE [20].”
BackgroundMethodMethod for Improving Indoor Positioning Accuracy Using Extended Kalman Filter
Lee, S.-H., Lim, I.-K., & Lee, J.-K. (2016) · Mobile Information Systems · doi:10.1155/2016/2369103 · Cited by 44
Detailed Examination of a Packet Collision Model for Bluetooth Low Energy Advertising Mode
Ghamari, M., Villeneuve, E., Soltanpur, C., Khangosstar, J., Janko, B., Sherratt, R. S., & Harwin, W. (2018) · IEEE Access · doi:10.1109/access.2018.2866323 · Cited by 50
“The BLE protocol has extended the functionality and applicability of previous Bluetooth protocols by incorporating some advanced technical features and new innovations [2].”
COVID‐19 in Italy: current state, impact and ICT‐based solutions
Tropea, M., & Rango, F. D. (2020) · IET Smart Cities · doi:10.1049/iet-smc.2020.0052 · Cited by 55
Artificial Intelligence, Sensors and Vital Health Signs: A Review
Junaid, S. B., Imam, A. A., Shuaibu, A. N., Basri, S. B., Kumar, G., Surakat, Y. A., Balogun, A. O., Abdulkarim, M., Garba, A., Sahalu, Y., et al. (2022) · Applied Sciences · doi:10.3390/app122211475 · Cited by 51
IoT data analytic algorithms on edge-cloud infrastructure: A review
Edje, A. E., Latiff, M. S. A., & Chan, W. H. (2023) · Digital Communications and Networks · doi:10.1016/j.dcan.2023.10.002 · Cited by 52
A Survey on Energy-Aware Security Mechanisms for the Internet of Things
He, P., Zhou, Y. X., & Qin, X. (2024) · Future Internet · doi:10.3390/fi16040128 · Cited by 58
A Survey on IoT: Architectures, Elements, Applications, QoS, Platforms and Security Concepts
Marques, G., García, N. M., & Pombo, N. G. C. C. (2016) · Studies in big data · doi:10.1007/978-3-319-45145-9_5 · Cited by 51
de Cerio, D. P. D., Hernández‐Solana, Á., Valenzuela, J. L., & Valdovinos, A. (2017) · Sensors · doi:10.3390/s17030499 · Cited by 43
“In [8], the BLE protocol stack is described, and the impact of several parameters on its performance is investigated, showing that configuration parameters have a big impact on the tradeoff between performance and energy consumption.”
BackgroundWang, Y., Wei, L., Vasilakos, A. V., & Jin, Q. (2015) · Future Generation Computer Systems · doi:10.1016/j.future.2015.10.020 · Cited by 42
“However, currently, BLE only supports star networks and cannot organize mesh networks, because BLE link layer do not support multicast [5].”
BackgroundChallenges and standardisation strategies for sensor-based data collection for digital phenotyping
Alam, N. B., Surani, M., Das, C. K., Giacco, D., Singh, S. P., & Jilka, S. (2025) · Communications Medicine · doi:10.1038/s43856-025-01013-3 · Cited by 50
“Additionally, the development of low-power wearable devices, leveraging energy-ef fi cient chipsets 42 , Blue-tooth Low Energy (BLE) 43 and hardware-based power management algorithms, enables prolonged monitoring while reducing the frequency of recharging 42,44 .”
Real-time multi-agent systems for telerehabilitation scenarios
Calvaresi, D., Marinoni, M., Dragoni, A. F., Hilfiker, R., & Schumacher, M. (2019) · Artificial Intelligence in Medicine · doi:10.1016/j.artmed.2019.02.001 · Cited by 42
“Wearable devices for telerehabilitation are usually characterized by low-energy consumption communication means: Bluetooth low-energy (BLE) [66] and Zigbee [67].”
BackgroundArora, J., Saini, A., Mehra, N., Jain, V., Shrey, S., & Parnami, A. (2019) · CHI Conference on Human Factors in Computing Systems · doi:10.1145/3290605.3300286 · Cited by 41
“Firstly, since each feature brick forms a separate communication channel with the host PC, the maximum number of feature bricks that can operate at once are limited by the communication bandwidth of the PC [13], and the minimum data rate required for the application.”
BackgroundMena, L. J., Félix, V. G., Ochoa-Brust, A. M., Ostos, R., González, E., Aspuru, J., Velarde-Alvarado, P., & Maestre, G. E. (2018) · Computational and Mathematical Methods in Medicine · doi:10.1155/2018/9128054 · Cited by 44
“The BlendMicro of Read Bear Labs [38], which combines the Atmega32U4 microcontroller unit with a Bluetooth Low Energy (BLE) module [39, 40], is used for microcontroller processing of the signal.”
MethodA Wearable Multifunctional Pulse Monitor Using Thermosensation-Based Flexible Sensors
Fu, Y., Zhao, S., & Zhu, R. (2019) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2018.2873754 · Cited by 40
“monitoring applications [47].”
Qureshi, U. M., Umair, Z., & Hancke, G. P. (2019) · Sensors · doi:10.3390/s19153282 · Cited by 40
“Furthermore, BLE RSS is susceptible to fast fading noise [14] and multi-path effects [25] caused by clutter present in the indoor environment, regardless of the transmission power level used by the wireless devices [26].”
BackgroundMethodAn Overview of Wireless Technologies for IoT Network
Sikimić, M., Amović, M., Vujović, V., Suknovic, B., & Manjak, D. (2020) · International Symposium INFOTEH-JAHORINA (INFOTEH) · doi:10.1109/infoteh48170.2020.9066337 · Cited by 42
“BLE is specific for devices with low bandwidth, as well as for devices powered by autonomous power sources [29, 30].”
BackgroundDeveloping a platform to evaluate and assess the security of wearable devices
Hale, M. L., Lotfy, K., Gamble, R. F., Walter, C., & Lin, J. (2019) · Digital Communications and Networks · doi:10.1016/j.dcan.2018.10.009 · Cited by 39
“Bluetooth Low Energy (BLE) [11,39,40], or “Bluetooth Smart”, is a scaled down version of the standard Bluetooth protocol designed for communication with small and power-constrained hardware.”
BackgroundData Gathering Techniques in WSN: A Cross-Layer View
Gurewitz, O., Shifrin, M., & Dvir, E. (2022) · Sensors · doi:10.3390/s22072650 · Cited by 48
“[210] for performance evaluation and comparison with ordinary Bluetooth and other protocols).”
BackgroundRattal, S., Badri, A., Moughit, M., Ar-Reyouchi, E. M., & Ghoumid, K. (2025) · IEEE Access · doi:10.1109/access.2025.3551224 · Cited by 49
“IoT devices must balance energy constraints, scalability, and reliability to support critical use cases like wearable monitoring [9] and remote patient care [10].”
Multihop data transfer service for Bluetooth Low Energy
Mikhaylov, K., & Tervonen, J. K. (2013) · International Conference on ITS Telecommunications · doi:10.1109/itst.2013.6685566 · Cited by 38
“point-to-point or star topologies [2], [5].”
BackgroundInfluentialWang, L., Zhang, D., Xiong, H., Gibson, J. P., Chen, C., & Xie, B. (2016) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2016.2523902 · Cited by 38
“0 low energy technology, the energy consumption of the Bluetooth scanning becomes much lower [34], which”
BackgroundZheng, L., Hu, B., Qiu, J., & Cui, M. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.2981723 · Cited by 40
“Nevertheless, some common indoor localization methods based on wireless fidelity (Wi-Fi) [1]–[5], Bluetooth [6], [7], infrared [8], visible light [9], radio-”
BackgroundCommunication and Security in Health Monitoring Systems -- A Review
Fotouhi, H., Čaušević, A., Lundqvist, K., & Björkman, M. (2016) · IEEE Annual International Computer Software and Applications Conference (COMPSAC) · doi:10.1109/compsac.2016.8 · Cited by 40
“In BLE, timing requirement in frequency hopping is more relaxed due to the longer stay in each channel.”
MethodInfluentialPerformance Evaluation of Bluetooth Low Energy for High Data Rate Body Area Networks
Afonso, J. A., Maio, A. F., & Simões, R. (2016) · Wireless Personal Communications · doi:10.1007/s11277-016-3335-4 · Cited by 39
“In [19], the authors evaluate the energy consumption, latency, piconet size, and throughput of BLE as a function of the connection interval and slave latency, either by means of theoretical, simulation or experimental results.”
BackgroundMethodInfluentialTowards an interoperable Internet of Things through a web of virtual things at the Fog layer
Negash, B., Westerlund, T., & Tenhunen, H. (2018) · Future Generation Computer Systems · doi:10.1016/j.future.2018.07.053 · Cited by 50
“All the three protocols use the same physical medium, 2.4 GHz radio [18], [15], to exchange information.”
BackgroundInfluentialImproved Bluetooth Low Energy Sensor Detection for Indoor Localization Services
Pušnik, M., Galun, M., & Šumak, B. (2020) · Sensors · doi:10.3390/s20082336 · Cited by 36
“Neburka et al. [11] evaluated the performance of the RSSI-based indoor positioning system in ideal and in real environment settings, where an increased fluctuation of RSSI values was observed in the real environment settings.”
BackgroundBLEach: Exploiting the Full Potential of IPv6 over BLE in Constrained Embedded IoT Devices
Spörk, M., Boano, C. A., Zimmerling, M., & Römer, K. (2017) · ACM Conference on Embedded Networked Sensor Systems (SenSys) · doi:10.1145/3131672.3131687 · Cited by 38
From lab to life: Fine-grained behavior monitoring in the elderly's home
Riboni, D., Bettini, C., Civitarese, G., Janjua, Z. H., & Bulgari, V. (2015) · IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops) · doi:10.1109/percomw.2015.7134060 · Cited by 42
“In particular, off-the-shelf Bluetooth low energy (BLE) beacons [14] not only include micro-localization features, but are also integrated with accelerometers and other sensors.”
BackgroundSecure Seamless Bluetooth Low Energy Connection Migration for Unmodified IoT Devices
Hussain, S. R., Mehnaz, S., Nirjon, S., & Bertino, E. (2017) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2017.2739742 · Cited by 35
“tions, few research efforts [20], [53], [54] have been devoted to enable seamless connectivity for IoT devices.”
BackgroundA CoAP-Based Network Access Authentication Service for Low-Power Wide Area Networks: LO-CoAP-EAP
García-Carrillo, D., Marín-López, R., Kandasamy, A., & Pelov, A. P. (2017) · Sensors · doi:10.3390/s17112646 · Cited by 35
“Several wireless technologies, such as Bluetooth [2] or IEEE 802.15.4 [3], give support to the myriad of devices connected to IoT networks.”
BackgroundInfluentialRapidly Deployable IoT Architecture with Data Security: Implementation and Experimental Evaluation
Maitra, S., & Yelamarthi, K. (2019) · Sensors · doi:10.3390/s19112484 · Cited by 42
“Bluetooth Low Energy (BLE) is a wireless personal area network developed by the Bluetooth Special Interest Group (SIG) and is used for short-range monitoring and control applications such as wearable electronics, medical informatics, consumer electronics, security, and entertainment systems [51].”
BackgroundA Comparison Analysis of BLE-Based Algorithms for Localization in Industrial Environments
Cannizzaro, D., Zafiri, M., Pagliari, D. J., Patti, E., Macii, E., Poncino, M., & Acquaviva, A. (2019) · Electronics · doi:10.3390/electronics9010044 · Cited by 37
“Bluetooth low-energy (BLE) uses the same frequency of Wi-Fi (2.4 GHz) but is designed as a short range energy-efficient communication protocol, allowing compatible devices to communicate through short messages with minimal overhead [6].”
InfluentialWen, H., Chen, Q. A., & Lin, Z. (2020) · USENIX Security Symposium · Cited by 93
Priyanka, E. B., & Thangavel, S. (2020) · Journal of Engineering Science and Technology Review · doi:10.25103/jestr.134.01 · Cited by 38
“Even though this is anything but a total rundown of utilizations, it can fill in as a decent beginning stage for future research in the significant regions [121].”
BackgroundPérez‐delHoyo, R., García-Mayor, C., Mora, H., Gilart-Iglesias, V., & Andújar-Montoya, M. D. (2016) · International Journal of Sustainable Development and Planning · doi:10.2495/sdp-v12-n3-357-367 · Cited by 40
“Low Energy Bluetooth beacons – BLE – also enable communication with mobile devices [26].”
BackgroundEnergy Harvesting in Internet of Things
Yau, C.-W., Kwok, T. T.-O., Lei, C., & Kwok, Y. R. (2017) · Internet of things · doi:10.1007/978-981-10-5861-5_3 · Cited by 36
CPS/IoT Ecosystem: Indoor Vertical Farming System
Isakovic, H., Fasching, A., Punzenberger, L., & Grosu, R. (2019) · IEEE International Symposium on Consumer Electronics (ISCE) · doi:10.1109/isce.2019.8900974 · Cited by 34
“cessor and Bluetooth Low Energy (BLE) transceiver with an integrated antenna [21].”
BackgroundRodríguez‐Rodríguez, I., Rodríguez, J., Elizondo-Moreno, A., Heras-González, P., & Gentili, M. (2019) · Symmetry · doi:10.3390/sym12010037 · Cited by 40
“allows a connection to be put to sleep, and wake up quickly (3 ms) [34], and can also use NFC, although this requires a small distance between devices.”
Background(2016) · Cited by 33
A Low-Power Wearable Stand-Alone Tongue Drive System for People With Severe Disabilities
Jafari, A., Buswell, N., Ghovanloo, M., & Mohsenin, T. (2017) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2017.2757031 · Cited by 39
“The BLE doesn’t need to be active at all, as it sends these 3 bits through advertising packet [42].”
BackgroundJoint Compression of EEG and EMG Signals for Wireless Biometrics
Cisotto, G., Guglielmi, A. V., Badia, L., & Zanella, A. (2018) · Globecom · doi:10.1109/glocom.2018.8647543 · Cited by 33
“technologies, such as Bluetooth Low Energy [5], IEEE 802.”
MethodInfluentialVoice Activated IoT Devices for Healthcare: Design Challenges and Emerging Applications
Spachos, P., Gregori, S., & Deen, M. J. (2022) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2022.3179680 · Cited by 46
“• Integrated circuits for low-power wireless communications [52]–[54].”
Background
Metadata
- Authors
- Gomez, C., Oller, J., & Paradells, J.
- Affiliations
- Universitat Politècnica de Catalunya/Fundació i2Cat, C/Esteve Terradas, 7, Castelldefels 08860, Spain
- i2CAT (ES)
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2012-08-29
- Volume
- 12
- Issue
- 9
- Pages
- 11734-11753
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC3478807
- OpenAlex
- W1971130353
- Cited by
- 967
- References
- 17
- Citations by year
- 2026: 34 · 2025: 51 · 2024: 48 · 2023: 42 · 2022: 47 · 2021: 68 · 2020: 100 · 2019: 105 · 2018: 128 · 2017: 120 · 2016: 108 · 2015: 68 · 2014: 34 · 2013: 13
- FWCI
- 48.24
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Wireless Body Area Networks
- Physical Sciences › Computer Science › Computer Networks and Communications › Energy Efficient Wireless Sensor Networks
- Keywords
- Bluetooth Low Energy, low-power wireless communication, energy consumption, throughput, battery life, coin cell batteries, bit error rate, sensor networks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.