Overview and Evaluation of Bluetooth Low Energy: An Emerging Low-Power Wireless Technology
Open accessThe DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
Bluetooth Low Energy (BLE) is an emerging low-power wireless technology developed for short-range control and monitoring applications that is expected to be incorporated into billions of devices in the next few years. This paper describes the main features of BLE, explores its potential applications, and investigates the impact of various critical parameters on its performance. BLE represents a trade-off between energy consumption, latency, piconet size, and throughput that mainly depends on parameters such as connInterval and connSlaveLatency. According to theoretical results, the lifetime of a BLE device powered by a coin cell battery ranges between 2.0 days and 14.1 years. The number of simultaneous slaves per master ranges between 2 and 5,917. The minimum latency for a master to obtain a sensor reading is 676 µs, although simulation results show that, under high bit error rate, average latency increases by up to three orders of magnitude. The paper provides experimental results that complement the theoretical and simulation findings, and indicates implementation constraints that may reduce BLE performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2. Theoretical lifetime of a slave for one-way and round-trip ATT message exchanges, and for different parameter configurations, based on CC2540 current measurements [11].](https://figures.cochat.ai/paper-figures/02304470230d427db90ed7f88e88237c/overview-and-evaluation-of-bluetooth-low-energy-an-emerging-low-power-wireless-figure-2.jpg)






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Haartsen, J. C. (2000) · IEEE Personal Communications · doi:10.1109/98.824570 · Cited by 643 · cited 1×
“BLE PROTOCOL STACK OVERVIEW Like in classic Bluetooth [7], the BLE protocol stack is composed of two main parts: the Controller and the Host.”
BackgroundApplications, challenges, and prospective in emerging body area networking technologies
Patel, M., & Wang, J. (2010) · IEEE Wireless Communications · doi:10.1109/mwc.2010.5416354 · Cited by 638 · cited 1×
“Healthcare, wellness and sports constitute an application domain where classic Bluetooth has already been used [14,15], and for which BLE constitutes an improvement [16].”
BackgroundWireless home automation networks: A survey of architectures and technologies
Gomez, C., & Paradells, J. (2010) · IEEE Communications Magazine · doi:10.1109/mcom.2010.5473869 · Cited by 557 · cited 1×
“been steadily gaining momentum in application domains that require multihop networking [2, 3].”
BackgroundSelf-citationMan-in-the-Middle Attack to the HTTPS Protocol
Callegati, F., Cerroni, W., & Ramilli, M. (2009) · IEEE Security & Privacy Magazine · doi:10.1109/msp.2009.12 · Cited by 347 · cited 1×
“When none of the first two methods can be used, the Just Works method is employed, although it is not authenticated and it does not provide protection against Man In The Middle (MITM) attacks [10].”
MethodExtending IP to Low-Power, Wireless Personal Area Networks
Hui, J. W., & Culler, D. E. (2008) · IEEE Internet Computing · doi:10.1109/mic.2008.79 · Cited by 280 · cited 1×
“In fact, the IETF 6LoWPAN Working Group (WG) [5] has already recognized the importance of BLE for the Internet of Things.”
BackgroundConnecting low-power and lossy networks to the internet
Ko, J., Terzis, A., Dawson-Haggerty, S., Culler, D. E., Hui, J. W., & Levis, P. (2011) · IEEE Communications Magazine · doi:10.1109/mcom.2011.5741163 · Cited by 207 · cited 1×
“While delivery delay may be tolerated for certain sensor measurement reading applications, a user that presses a button in a remote control is sensitive to delays greater than 500 ms [12].”
BackgroundReliability and Availability Evaluation of Wireless Sensor Networks for Industrial Applications
Silva, I., Guedes, L. A., Portugal, P., & Vasques, F. (2012) · Sensors · doi:10.3390/s120100806 · Cited by 189 · cited 1×
“4e specification [21].”
Continua: An Interoperable Personal Healthcare Ecosystem
Carroll, R., Cnossen, R., Schnell, M., & Simons, D. (2007) · IEEE Pervasive Computing · doi:10.1109/mprv.2007.72 · Cited by 159 · cited 1×
“In fact, the Continua Health Alliance, an industry coalition of healthcare and technology companies [17], announced the selection of BLE for “activity monitors and heart rate sensors to be used to monitor a user‟s health and fitness levels” [18].”
BackgroundBluetooth low energy: Wireless connectivity for medical monitoring
Omre, A. H., & Keeping, S. (2010) · Journal of Diabetes Science and Technology · doi:10.1177/193229681000400227 · Cited by 96 · cited 1×
“In fact, the Continua Health Alliance, an industry coalition of healthcare and technology companies [17], announced the selection of BLE for “activity monitors and heart rate sensors to be used to monitor a user‟s health and fitness levels” [18].”
BackgroundA Decentralized Scheduling Algorithm for Time Synchronized Channel Hopping
Tinka, A., Watteyne, T., & Pister, K. S. J. (2010) · Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering · doi:10.1007/978-3-642-17994-5_14 · Cited by 93
Cited by
Items 501–600 of 969
Impact of IoT in Healthcare: Improvements and Challenges
Swapnarekha, H., Nayak, J., Gorripotu, T. S., & Pelusi, D. (2020) · India studies in business and economics · doi:10.1007/978-981-15-6907-4_5 · Cited by 7
A Survey of Internet of Things based Indoor Positioning Systems based on Bluetooth Low Energy Beacon
Rahman, S. S., Kamaruzaman, M. A., Rashid, R. A., Elvin, C. J., Tashbib, E. T., Imran, M., & Sarijari, M. A. (2024) · ELEKTRIKA- Journal of Electrical Engineering · doi:10.11113/elektrika.v23n1.449 · Cited by 7
“The smart museum system of [22] works well within short ranges and fewer beacons but fails to remain accurate when several beacons are densely situated.”
BackgroundA first step to develop quantum medicine: Radiometers, detectors, and biosensors
Chamkouri, H., Si, J., Chen, P., Niu, C., & Chen, L. (2024) · Sensing and Bio-Sensing Research · doi:10.1016/j.sbsr.2024.100658 · Cited by 11
Wireless Data Transfer for Implanted Real-Time Peripheral Nerve Interfaces
Quartana, C., Coviello, A., Ros, P. M., Bono, F. D., Demarchi, D., Spagnolini, U., & Magarini, M. (2024) · Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering · doi:10.1007/978-3-031-72524-1_5 · Cited by 6
Sensing, processing and analytics
Atzmueller, M., Fries, B., & Hayat, N. (2016) · ACM International Joint Conference on Pervasive and Ubiquitous Computing (UbiComp) · doi:10.1145/2968219.2968438 · Cited by 6
“In a prototypical project, cf. [13], we evaluated an approach utilizing BLE [15], since BLE modules are typically available on modern smartphones.”
MethodApplication Protocols and Wireless Communication for IoT: A Simulation Case Study Proposal
Novelli, L., Jorge, L., Melo, P., & Koscianski, A. (2018) · International Symposium on Communication Systems, Networks and Digital Signal Processing (CSNDSP) · doi:10.1109/csndsp.2018.8471765 · Cited by 10
“Differing from Z-Wave, Thread, and ZigBee, Bluetooth Low Energy (BLE) provides a solution in scenarios where a single-hop solution is required, with implantation similarities from the Bluetooth, operating in the 2.4GHz ISM and achieves over 1Mbps of data-rate [8].”
BackgroundTowards an open data framework for body sensor networks supporting bluetooth low energy
Singh, N., & Ricke, D. O. (2016) · Wearable and Implantable Body Sensor Networks · doi:10.1109/bsn.2016.7516294 · Cited by 6
Guzman, D. A. F., Ros, P. M., Demarchi, D., & Crepaldi, M. (2020) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2020.2998221 · Cited by 6
“7 μ s for an error-free one-way ATT exchange transmission was reported in [41] considering the minimum connection interval of 7 .”
MethodAnalysis and Performance Evaluation of Bluetooth Low Energy Piconet Network
Farej, Z. K., & Saeed, A. M. (2020) · OALib · doi:10.4236/oalib.1106814 · Cited by 7
(2019) · Journal of System and Management Sciences · doi:10.33168/jsms.2019.0407 · Cited by 10
A Novel Antenna System for Direction Finding Applications Using BLE 5.1 Technology
Gouzouasis, I. A., Papaharalabos, S., Nasa, M. A., & Karlsson, P. (2023) · European Conference on Antennas and Propagation · doi:10.23919/eucap57121.2023.10132951 · Cited by 7
Elsawaf, Y., Jaklitsch, E. L., Belyea, M., Rodriguez, L., Silverman, A., Valley, H., Koleilat, I., Yaghi, N. K., & Jaeggli, M. P. (2023) · Journal of Personalized Medicine · doi:10.3390/jpm13091318 · Cited by 6
“In the proposed device, the Controller would be implemented in our pressure sensor, and the Host would be the iPhone [31].”
MethodTowards a commodity solution for the internet of things
Xu, H., Collinge, W. O., Schaefer, L. A., Landis, A. E., Bilec, M. M., & Jones, A. K. (2016) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2016.03.009 · Cited by 7
Wireless Enabling Technologies for the Internet of Things
Elkhodr, M., Shahrestani, S. A., & Cheung, H. (2016) · Advances in systems analysis, software engineering, and high performance computing book series · doi:10.4018/978-1-5225-0287-6.ch015 · Cited by 6
A channel access scheme for Bluetooth low energy to support delay-sensitive applications
Dwijaksara, M. H., Jeon, W. S., & Jeong, D. G. (2016) · IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) · doi:10.1109/pimrc.2016.7794822 · Cited by 6
“There are some works related to the connection state of BLE [6], [9], [10], however, none of them addresses the aforementioned issue.”
BackgroundInformation and Communication System for informing Users in Traffic Environment – SaforA
Peraković, D., Periša, M., Sente, R. E., Bijelica, N., Brletić, L., Bucak, B., Ignjatić, A., Mišić, V., Papac, A., Vuletić, M., et al. (2017) · EAI International Summit on Smart City 360° (SmartCity360) · doi:10.4108/eai.14-2-2017.152166 · Cited by 6
“Bluetooth technology (BLe v.4.0.) is an open standard that can be implemented in IoT and AAL concepts [Gomez et al 2012].”
BackgroundInfluentialUse of a Mobile BIM Application Integrated with Asset Tracking Technology Over a Cloud
Park, J., & Cho, Y. K. (2017) · Springer eBooks · doi:10.1007/978-981-10-6190-5_135 · Cited by 6
Indoor Location Using Bluetooth Low Energy Beacons
Gomes, A. C. D. S. F., Pinto, A., Soares, C. P. D. A., Torres, J. M., Sobral, P., & Moreira, R. S. (2018) · Advances in intelligent systems and computing · doi:10.1007/978-3-319-77712-2_53 · Cited by 6
Enabling Dynamic and Lightweight Management of Distributed Bluetooth Low Energy Devices
Ha, M., & Lindh, T. (2018) · 2012 International Conference on Computing, Networking and Communications (ICNC) · doi:10.1109/iccnc.2018.8390355 · Cited by 6
“Bluetooth Low Energy (BLE) is a wireless personal area network technology aimed at smart applications in the healthcare, fitness, beacons, home entertainment, etc [1].”
BackgroundPerformance Modeling and Optimization for a Fog-Based IoT Platform
Tang, S. (2023) · IoT · doi:10.3390/iot4020010 · Cited by 8
“The external arrival rate vector is γvec = [γ1, γ2, · · · , γn], where all elements are set to be identical and each changes from 1 to 10 for numerical evaluation, and the total external arrival rate is γ = ∑ i=1 γi; the fog node service rate vector is μvec = [μ1, μ2, · · · , μn], and the initial setting for numerical…”
BackgroundA home automation based environmental sound alert for people experiencing hearing loss
Mielke, M., & Brück, R. (2016) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2016.7591935 · Cited by 6
“Connections are scheduled in intervals (connInterval) and in between the devices go into sleep mode to save energy [6].”
BackgroundReliable Compression Route Protocol for Mobile Crowd Sensing (RCR-MSC)
Nsaif, M., Al-Haboobi, A., Rabee, F., & Alasadi, F. A. (2019) · Journal of Communications · doi:10.12720/jcm.14.3.170-178 · Cited by 6
Energy-Efficient and Secure Data Networking Using Chaotic Pulse Position Coded PDUs
Feng, D., Shi, Y. R., Das, S., & Biswas, S. K. (2019) · IEEE Transactions on Green Communications and Networking · doi:10.1109/tgcn.2019.2960627 · Cited by 6
“…CPPM [11], Pulse Position Modulation Time Hopping (PPM TH) [23] (key-based cryptographic coding), our previous work PPCP [12], BPPM [24], M-ary PPM [25], M-ary DPPM [19], and BLE [26] using a wideband channel model and hardware experiments based on the prototype of the designed IoT sensor platform.”
BackgroundMethodVSDM: A Virtual Service Device Management Scheme for UPnP-Based IoT Networks
Kayas, G., Hossain, M., Payton, J., & Islam, S. M. R. (2020) · IEEE Annual Ubiquitous Computing, Electronics & Mobile Communication Conference (UEMCON) · doi:10.1109/uemcon51285.2020.9298148 · Cited by 7
“In general, a gateway device act as a bridge between heterogeneous IoT devices within the local area network and remote devices, performing protocol translation, packet fragmentation, and communication bridging between different communication technologies (e.g., BLE [9], Zigbee [10], 6LoWPAN [11]).”
InfluentialBALSA: Bluetooth Low Energy Application Layer Security Add-on
Ortiz-Yepes, D. A. (2015) · International Workshop Secure Internet Things · doi:10.1109/siot.2015.12 · Cited by 6
“Communication between a client and a server using BLE achieves low energy consumption by running at low clock cycles [7], using a simple protocol and preventing client polling by using notifications/indications.”
BackgroundMethodA Wireless Body Sound Sensor with a Dedicated Compact Chipset
Dong, J., Jiang, H., Yang, K., Weng, Z., Li, F., Wei, J., Ning, Y., Chen, X., & Wang, Z. (2016) · Circuits Systems and Signal Processing · doi:10.1007/s00034-016-0412-6 · Cited by 6
Data Security and Privacy in Cyber‐Physical Systems for Healthcare
Čaušević, A., Fotouhi, H., & Lundqvist, K. (2017) · Wiley eBooks · doi:10.1002/9781119226079.ch15 · Cited by 6
Efficient Routing Primitives for Low-power and Lossy Networks in Internet of Things
Ghaleb, B. (2026) · Research Output (Edinburgh Napier University) · doi:10.17869/enu.2026.2070542 · Cited by 6
Trust in the Networked Era: When Phones Become Hotel KeysPreprint
Keymolen, E. (2018) · SSRN Electronic Journal · doi:10.2139/ssrn.3168402 · Cited by 6
Internet of Entities (IoE): a Blockchain-based Distributed Paradigm to SecurityPreprint
Saia, R. (2018) · arXiv (Cornell University) · doi:10.13140/rg.2.2.19702.65600 · Cited by 10
Rammouz, R., Labrak, L., Abouchi, N., Rammouz, R., Constantin, J., Zaatar, Y., & Zaouk, D. (2015) · International Conference on Advances in Biomedical Engineering (ICABME) · doi:10.1109/icabme.2015.7323275 · Cited by 5
“Concerning the BLE module, it will wake up and start advertising on three channels until it receives a connection request from the master (gateway) to initiate the transmission [11, 12].”
BackgroundA Detailed Exploration of Usability Statistics and Application Rating Based on Wireless Protocols
Khan, A. A., Ali, M. H., Haque, A., Debnath, C., & Jabiullah, M. I. (2020) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 5
Bluetooth Performance Evaluation based on Notify for Real-time Body-Area Sensor Networks
Reich, O., Hübner, E., Ghita, B., Wagner, M., & Schäfer, J. (2020) · IEEE International Workshop on Metrology for Industry 4.0 & IoT (MetroInd4.0&IoT) · doi:10.1109/metroind4.0iot48571.2020.9138199 · Cited by 5
“[14] the theoretical maximum number of simultaneous connected Bluetooth devices is between 2 and 5917.”
BackgroundPower Autonomy Estimation of Low-Power Sensor for Long-Term ECG Monitoring
Bregar, K., Krištofelc, T., Depolli, M., Avbelj, V., & Rashkovska, A. (2022) · Sensors · doi:10.3390/s22145070 · Cited by 5
IOT Architecture and its Integration with Mechatronics
Tasnim, R., Hussein, M. R., Hasan, M. K., Islam, S., Akhter, F., & Farhan, A. (2024) · Emerging trends in mechatronics · doi:10.1007/978-981-97-7117-2_5 · Cited by 5
Bhutta, M. A. M., Kim, S., & Kim, Y. (2025) · IEEE Internet of Things Journal · doi:10.1109/jiot.2025.3544290 · Cited by 7
“The BLE is experiencing rapid growth thanks to its low latency, extensive adoption in commercial electronics, and energy-efficient operation [69].”
Namiot, D., & Sneps-Sneppe, M. (2015) · Automatic Control and Computer Sciences · doi:10.3103/s0146411615030062 · Cited by 5
Wireless temperature sensor for harsh industrial environments
Kerezov, A., Kulkarni, A., & Nihtianov, S. N. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392721 · Cited by 5
“A comparison between the Classic Bluetooth technology and BLE is given in [20].”
MethodNamiot, D., & Sneps-Sneppe, M. (2014) · doi:10.1109/nets4carsfall.2014.7000912 · Cited by 7
Performance Evaluation of Bluetooth in a Wireless Body Area Network for Practical Applications
Reich, O., Hübner, E., Ghita, B., Wagner, M., & Schäfer, J. (2020) · IEEE Sensor Array and Multichannel Signal Processing Workshop (SAM) · doi:10.1109/sam48682.2020.9104399 · Cited by 5
Indoor positioning system using Beacon technology
Guaman, B. P., & Cordero, J. (2020) · Iberian Conference on Information Systems and Technologies (CISTI) · doi:10.23919/cisti49556.2020.9141009 · Cited by 5
“Los beacons poseen un identificador único universal que puede ser captado por diferentes dispositivos como smartphones, tablets, entre otros, que se encuentren en un rango que puede llegar a 50 metros o más [2].”
BackgroundConjoint Vehicle License Plate Identification System
Wiseman, Y. (2020) · The Open Transportation Journal · doi:10.2174/1874447802014010164 · Cited by 5
Ryu, D.-S., Yeon, Y.-M., & Kim, S. (2021) · Electronics · doi:10.3390/electronics10192335 · Cited by 5
“The original design of the BLE is focused on star topology networking, which limits the network application scope and excludes end-to-end path diversity [13].”
BackgroundMethodInfluentialA Privacy-Aware Zero Interaction Smart Mobility System
Righini, S., Calderoni, L., & Maio, D. (2022) · IEEE Access · doi:10.1109/access.2022.3146340 · Cited by 7
“BLE Advertising enables the dissemination of a message from a certain device (the advertiser) to surrounding devices (the receivers) [37].”
BackgroundOccupancy inference using infrastructure elements in indoor environment: a multi-sensor data fusion
Trivedi, D., Badarla, V., & Bhandari, R. B. (2023) · CCF Transactions on Pervasive Computing and Interaction · doi:10.1007/s42486-023-00130-z · Cited by 5
“Also, energy is a critical criterion for handheld smart devices whereas for better accuracy high-frequency transmission of data is required which leads to high energy consumption in the case of BLE beacons (Gomez et al. 2012).”
BackgroundDevelopment of an Autonomous Modular Swimming Robot with Disturbance Rejection and Path Tracking
Deng, H., Nitroy, C., Panta, K., Li, D., Priya, S., & Cheng, B. (2023) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros55552.2023.10341571 · Cited by 6
“BLE, developed for short-range control and monitoring applications, is a low-power wireless technology that requires considerably less energy than Classic Bluetooth [33].”
BackgroundA virtual reality-based multiplayer game using fine-grained localization
Schepper, T. D., Braem, B., & Latré, S. (2015) · Global Information Infrastructure and Networking Symposium · doi:10.1109/giis.2015.7347176 · Cited by 5
Gossip in a Smartphone Peer-to-Peer Network
Newport, C. C. (2017) · ACM Symposium on Principles of Distributed Computing (PODC) · doi:10.1145/3087801.3087813 · Cited by 5
Indoor positioning method using BITON and linear Kalman filter
Lee, S.-H., & Lim, K.-S. (2018) · Soft Computing · doi:10.1007/s00500-018-3259-x · Cited by 5
Smart Wristband System for Improving Quality of Life for Users in Traffic Environment
Peraković, D., Periša, M., Sente, R. E., Zorić, P., Bucak, B., Ignjatić, A., Mišić, V., Vuletić, M., Bijelica, N., Brletić, L., et al. (2019) · EAI/Springer Innovations in Communication and Computing · doi:10.1007/978-3-319-76998-1_32 · Cited by 5
AN OPEN SOURCE ARCHITECTURE OF A WIRELESS BODY AREA NETWORK IN A MEDICAL ENVIRONMENT
Kokkonis, G., & The Society of Digital Information and Wireless Communication (2016) · International Journal of Digital Information and Wireless Communications · doi:10.17781/p001975 · Cited by 5
“Furthermore, the Bluetooth Special Interest Group announced and implemented recently an alternative protocol, the Bluetooth Low Energy (BLE) [22], an ultra-low power technology for devices with limited battery capacity allowing consumption of only a small fraction of the power of the original Bluetooth products, which…”
BackgroundAn Application of Using Bluetooth Indoor Positioning, Image Recognition and Augmented Reality
Tsai, C.-Y., & Hsu, K.-H. (2016) · IEEE International Conference on e-Business Engineering (ICEBE) · doi:10.1109/icebe.2016.054 · Cited by 5
Wireless Communication for Modular Production FacilitiesPreprint
Schellenberger, C., Zimmermann, M., & Schotten, H. D. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1804.08273 · Cited by 6
Smart Environment Monitoring Models Using Cloud‐Based Data Analytics: A Comprehensive Study
Borkar, P. S., & Thakur, R. (2021) · Wiley eBooks · doi:10.1002/9781119785873.ch10 · Cited by 7
Lightweight Frame Format for Interoperability in Wireless Sensor Networks of IoT-Based Smart Systems
Jaloudi, S. (2026) · Future Internet · doi:10.3390/fi18010033 · Cited by 5
“According to [60] and Silicon Labs [61], the manufacturers of these technology boards, these values are typical with security off and non-mesh networks.”
Performance Analysis of Bicycle-to-Pedestrian Safety Application using Bluetooth Low Energy
Park, H., Lee, S.-W., Moon, E., Ahmed, S. H., & Kim, D. (2017) · ACM Conference on Research in Adaptive and Convergent Systems (RACS) · doi:10.1145/3129676.3129727 · Cited by 4
“BLE defines protocols and related architectures that are able to communicate with low power [7][8][11][4][13].”
BackgroundAutomatic Remote Car Locker Using Bluetooth Low Energy Wireless Communication
Faraaz, S. M., Naik, B. B., & Singh, D. (2019) · Communications in computer and information science · doi:10.1007/978-981-13-8581-0_38 · Cited by 4
Bardoutsos, A., Markantonatos, D., Nikoletseas, S., Spirakis, P. G., & Tzamalis, P. (2021) · International Conference on Distributed Computing in Smart Systems and the Internet of Things (DCOSS-IoT) · doi:10.1109/dcoss52077.2021.00067 · Cited by 4
Keskinoğlu, C., & Aydın, A. (2022) · Journal of Ultrasound in Medicine · doi:10.1002/jum.15948 · Cited by 5
“BLE is used for the communication of the system with the computer.(36) In the study, a principle named pitch–catch is used for TOF calculation.”
MethodInternet-of-Things in Emergency Services: Architecture, Applications, and Research Challenges
Shamsudheen, S., Karthik, G., Anoop, A., & Gobinathan, P. (2023) · International Conference on Advanced Innovations in Smart Cities (ICAISC) · doi:10.1109/icaisc56366.2023.10085468 · Cited by 6
“Three-layered IoT architecture energy use, latency, piconet size, and throughput are trade-offs in BLE, however, parameter adjustment enables BLE to be tailored for various applications [11].”
BackgroundBarman, P., Chowdhury, R., Chakraborty, T., Goswami, A., Ghosh, S., & Saha, B. (2025) · Neural Computing and Applications · doi:10.1007/s00521-025-11154-0 · Cited by 5
Site Monitoring of Crews and Passengers on Board by the BLE and PLM Combination
Kwon, H.-J., Yang, H., & Lee, S.-G. (2015) · Journal of Advanced Marine Engineering and Technology · doi:10.5916/jkosme.2015.39.4.463 · Cited by 4
Trial of real-time locating and messaging system with Bluetooth low energy
Arisaka, N., Mamorita, N., Isonaka, R., Kawakami, T., & Takeuchi, A. (2016) · Technology and Health Care · doi:10.3233/thc-161220 · Cited by 4
“NFC was primarily designed for short-range wireless communication between mobile devices [15,16,18,19].”
InfluentialLow-Cost Mitigation Against Cold Boot Attacks for an Authentication Token
Goldberg, I., Jenkinson, G., & Stajano, F. (2016) · Lecture notes in computer science · doi:10.1007/978-3-319-39555-5_3 · Cited by 4
“BLE also supports a privacy feature, in which hardware addresses are encrypted over the air, in order to avoid tracking of devices [14]; this feature also meshes well with our requirements.”
BackgroundBlueNet: BLE-based ad-hoc communications without predefined roles
Yang, J., Poellabauer, C., Mitra, P., Rao, J., & Neubecker, C. (2017) · IEEE SmartWorld, Ubiquitous Intelligence & Computing, Advanced & Trusted Computing, Scalable Computing & Communications, Cloud & Big Data Computing, Internet of People and Smart City Innovation (SmartWorld/SCALCOM/UIC/ATC/CBDCom/IOP/SCI) · doi:10.1109/uic-atc.2017.8397434 · Cited by 4
“Previous research has shown that BLE can maintain robust short-range communication for both static and mobile scenarios [5], while also providing low power consumption and low latency [6].”
BackgroundModel Checking Indoor Positioning System With Triangulation Positioning Technology
Yuan, D., Ning, M., Xu, R., Zhou, S., Shi, W., Zheng, K. W., & Huang, X. (2018) · International Conference on Information Technology in Medicine and Education · doi:10.1109/itme.2018.00193 · Cited by 4
“BLE is treated as a module connecting dispatch radar and devices with high efficiency [13, 14].”
MethodMultilayered Network Model for Mobile Network Infrastructure Disruption
Hrabčák, D., Doboš, Ľ., Papaj, J., & Ovseník, Ľ. (2020) · Sensors · doi:10.3390/s20195491 · Cited by 4
“However, a slave device may participate in one or more piconets [12].”
BackgroundInfluentialRevisiting Adaptive Frequency Hopping Map Prediction in Bluetooth with Machine Learning Classifiers
Lee, J., Park, C., & Roh, H. (2021) · Energies · doi:10.3390/en14040928 · Cited by 4
“Since Ubertooth One also supports Bluetooth Low Energy (BLE) [24], AFH map prediction in BLE sniffers (e.g., [25]) could be considered as a future work.”
BackgroundInfluentialCluster-Based Transmission Diversity Optimization in Ultra Reliable Low Latency Communication
Shanto, M. A. H., Binodon, Karmaker, A., Reza, M. M., & Hossain, M. A. (2022) · Network · doi:10.3390/network2010012 · Cited by 4
An Enhanced Piezoelectric-Generated Power Technique for Qi Wireless Charging
Elmannai, W., Elleithy, K. M., Benz, A. A., DeAngelis, A. C., & Weaver, N. (2023) · Clean Technologies · doi:10.3390/cleantechnol5010006 · Cited by 6
Introductory Chapter: An Overview to the Internet of Things
Domínguez-Morales, M., Varela‐Vaca, Á. J., & Miró-Amarante, L. (2023) · IntechOpen eBooks · doi:10.5772/intechopen.108960 · Cited by 6
Design of a Wearable Remote Neonatal Health Monitoring Device
Rao, H., Saxena, D., Kumar, S., Sagar, G. V., Amrutur, B. S., Mony, P. K., Thankachan, P., Shankar, K., Rao, S. P., & Bhat, S. (2015) · Communications in computer and information science · doi:10.1007/978-3-319-26129-4_3 · Cited by 5
Quarto, A., Soldo, D., Gemmano, S., Dario, R., Lecce, V. D., Guaragnella, C., Cardellicchio, A., & Lombardi, A. (2017) · IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems (EESMS) · doi:10.1109/eesms.2017.8052698 · Cited by 4
“On the other hand, in [24, 25] the agent based distributed approach in IoT is presented as an alternative to a middleware-based centralized approach.”
Trust in the Networked Era: When Phones Become Hotel Keys
Keymolen, E. (2018) · Techné Research in Philosophy and Technology · doi:10.5840/techne201792271 · Cited by 9
“BLE is a low-power technology developed for short-range control and monitoring applications (Gomez, Oller, and Paradells 2012, 11734).”
Mobile application for elderly assistance in public transport
Concepción-Sánchez, J. Á., Caballero‐Gil, P., Suárez-Armas, J., & Álvarez-Díaz, N. (2017) · doi:10.1145/3109761.3158387 · Cited by 4
“To do this, the mobile application, developed for Android devices, will use Bluetooth Low Energy (BLE) [31] and beacons to know where the users are and what actions they are doing at any given time.”
MethodCubeSat networks: Balancing power with satellite-to-ground data throughput
Ennis, S., & Dukes, J. (2018) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2018.8396750 · Cited by 5
“4 [67], Bluetooth Low Energy (BLE) [68], and the IPv6 based “Routing Protocol for Low power and lossy networks” (RPL) [69].”
BackgroundA Critical Review of Wireless Health Monitoring Devices
Jena, M. K., & Ansari, I. A. (2018) · IEEE Conference on Information and Communication Technology (CICT) · doi:10.1109/infocomtech.2018.8722358 · Cited by 5
“Bluetooth Low Energy (BLE) [33]: consume less power than Bluetooth.”
BackgroundA PORTABLE WEARABLE TELE ECG MONITORING SYSTEM
Priya, K. J., Yadav, K. H., & Jyothsna, K. (2020) · International Journal of Engineering Applied Sciences and Technology · doi:10.33564/ijeast.2020.v04i12.123 · Cited by 4
Toward Mobile Distributed Ledgers
Chatzopoulos, D., Jain, A., Gujar, S., Faltings, B. V., & Hui, P. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3113730 · Cited by 4
Blouetooth Low Energy: A Survey
Hilal, S. (2017) · International Journal of Computer Applications · doi:10.5120/ijca2017913248 · Cited by 4
IoT in Healthcare: A 360-Degree View
Mehta, R., Khanna, K., & Sahni, J. (2022) · Internet of things · doi:10.1007/978-3-030-89554-9_4 · Cited by 4
Wireless Sensor Network Based Smart Home System over BLE with Energy Harvesting Capability
Galinina, O., Mikhaylov, K., Andreev, S. D., & Turlikov, A. M. (2014) · Lecture notes in computer science · doi:10.1007/978-3-319-10353-2_37 · Cited by 4
A SCO-Based Tower Crane System for Prefabrication Construction
Liu, D., Lu, W., Niu, Y., & Wang, H. (2016) · Springer eBooks · doi:10.1007/978-981-10-0855-9_87 · Cited by 4
“Compared to other wireless communication technologies, Bluetooth is preferred because low-energy Bluetooth could perform lower power consumption [20] .”
BackgroundMicrointeractions in Mobile and Wearable Computing
Aleksy, M., Brönmark, J., & Mahate, S. (2016) · International Conference on Advanced Information Networking and Applications (AINA) · doi:10.1109/aina.2016.134 · Cited by 4
“Digital beacons, such as iBeacon use Bluetooth low energy [9] proximity sensing to send an unique identifier.”
MethodNoncoherent Low-Frequency Ultrasonic Communication System with Optimum Symbol Length
Jeon, K. M., Kim, H. K., & Lee, M. J. (2016) · International Journal of Distributed Sensor Networks · doi:10.1155/2016/9713180 · Cited by 4
“Both NFC and BLE have been successfully applied to shortrange communication-based services, including electronic payment or location-based advertisement via smartphones.”
BackgroundBeaconholic: An efficient framework for location sensing reminder application using IoT
Assissi, A., Paul, A. M., Mathew, J., Paul, J., Jose, T. J., & Soumya, K. (2016) · International Conference on Electrical, Electronics, and Optimization Techniques · doi:10.1109/iceeot.2016.7755334 · Cited by 4
“The proposal in [3] gives an extensible and flexible architecture for incorporating Wireless Sensor Networks with the Cloud.”
BackgroundMethodOn Findability Issues of Constrained Web of Things in a Smart Home Environment
Cheah, W.-T., & Liao, C.-F. (2017) · International Conference on Platform Technology and Service · doi:10.1109/platcon.2017.7883719 · Cited by 4
“Also, as the CoAP specification does not limit itself to IP-based network, we are investigating the way to construct a CoAP stack on top of a BLE (Bluetooth Low Energy) [23] network.”
BackgroundCharacterizing driving environments through Bluetooth discovery
Bronzi, W., Faye, S., Frank, R., & Engel, T. (2017) · International Conference on Information and Communication Technology Convergence (ICTC) · doi:10.1109/ictc.2017.8191028 · Cited by 6
Spatial-aware service management in a pervasive environment
Liao, C.-F., & Fu, H.-Y. (2017) · Service Oriented Computing and Applications · doi:10.1007/s11761-017-0223-z · Cited by 4
“As mentioned, a Worker Node is typically a software module running on a Pervasive Host, where the Pervasive Host can be the control board of a sensor, a gateway to BLE-connected(Bluetooth Low Energy) [12] devices, or a controllable home appliance.”
BackgroundPerformance Comparison Between ETSI SmartBAN and Bluetooth
D'Souza, A., Viittala, H., Hämäläinen, M., & Mucchi, L. (2018) · International Symposium on Medical Information and Communication Technology · doi:10.1109/ismict.2018.8573708 · Cited by 4
Identification of Bluetooth-Enabled IoT Devices Through Syntactic Similarity Techniques
Mavrogiorgou, A., Kiourtis, A., Touloupou, M., & Kyriazis, D. (2019) · International Conference on Ubiquitous and Future Networks · doi:10.1109/icufn.2019.8806153 · Cited by 4
“GARMIN VIVOSMART SPECIFICATIONS’ SYNTACTIC RESULTS Unknown device Garmin Vivosmart -------------------- 00054F6BD52B Known devices’ Name ------------ MAC Levenshtein Name ------------ MAC Overall Garmin Vivomove 0.71 0.86 00054F6C6192 1.00 Garmin Vivosport 0.88 0.94 00054F6BD535 1.00 Garmin Vivofit 0.79 0.89 00054F6BD…”
MethodInfluentialWearables Security and Privacy
Blasco, J., Chen, T., Patil, H. K., & Wolff, D. (2019) · Studies in systems, decision and control · doi:10.1007/978-3-319-92384-0_11 · Cited by 7
Leveraging Earables for Natural Calibration-Free Multi-Device Identification in Smart Environments
Hashem, O. A., Alkiek, K., Youssef, M. A., & Harras, K. A. (2021) · IEEE Workshop on Mobile Computing Systems and Applications (WMCSA) · doi:10.1145/3446382.3448653 · Cited by 4
“As a part of the BLE protocol, peripherals broadcast advertisement beacons to allow for their discovery by host devices [18].”
BackgroundAn iBeacon-Based Location-Aware Advertising System
Ning, J. (2016) · UWSpace (University of Waterloo) · Cited by 5
Epidemic Exposure Notification with Smartwatch: A Proximity-Based Privacy-Preserving ApproachPreprint
Ng, P. C., Spachos, P., Gregori, S., & Plataniotis, K. N. (2020) · arXiv (Cornell University) · doi:10.48550/arxiv.2007.04399 · Cited by 4
“4 GHz ISM band [17], BLE is readily available in many smart devices including smartwatches, earphones, smart thermostats, etc.”
BackgroundLoubet, G. (2021) · theses.fr (ABES) · doi:10.70675/598369e1zd175z411bzb305zf00fcf7269d5 · Cited by 8
Recent Advances in Green and Intelligent Electrochemical Sensing System for Environmental Monitoring
Chu, C., Mou, J., Zhang, H., & Ding, J. (2026) · Advanced Sustainable Systems · doi:10.1002/adsu.70485 · Cited by 3
“Bluetooth Low Energy offers low-power connection for portable and wearable sensors [160].”
Bodrumlu, T., & Çalışkan, F. (2024) · Sensors · doi:10.3390/s24103048 · Cited by 3
“BLE is Bluetooth Low Energy (BLE) and Wi-Fi operate on the same frequency. intended for short-range and energy-e ffi cient communication using BLE is intended for short-range and energy-efficient communication using brief messages [8]. brief messages [8].”
BackgroundA wireless EEG device using Bluetooth for brain activity measurement
Bai, H., yang, S., Xiang, Z., & Li, C. (2024) · International Conference on Future of Medicine and Biological Information Engineering (MBIE) · doi:10.1117/12.3045891 · Cited by 3
“CC2652 Bluetooth chip, a high-performance wireless MCU chip that integrates Bluetooth low energy consumption and multi-protocol, has powerful processing power, rich peripheral interfaces, low power design, and high security[8].”
Headphones over the cochlear-implant sound processor to replace direct audio input
Bernstein, J. G. W., Voelker, J., & Phatak, S. A. (2024) · JASA Express Letters · doi:10.1121/10.0028737 · Cited by 3
Metadata
- Authors
- Gomez, C., Oller, J., & Paradells, J.
- Affiliations
- Universitat Politècnica de Catalunya/Fundació i2Cat, C/Esteve Terradas, 7, Castelldefels 08860, Spain
- i2CAT (ES)
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2012-08-29
- Volume
- 12
- Issue
- 9
- Pages
- 11734-11753
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC3478807
- OpenAlex
- W1971130353
- Cited by
- 967
- References
- 17
- Citations by year
- 2026: 34 · 2025: 51 · 2024: 48 · 2023: 42 · 2022: 47 · 2021: 68 · 2020: 100 · 2019: 105 · 2018: 128 · 2017: 120 · 2016: 108 · 2015: 68 · 2014: 34 · 2013: 13
- FWCI
- 48.24
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Wireless Body Area Networks
- Physical Sciences › Computer Science › Computer Networks and Communications › Energy Efficient Wireless Sensor Networks
- Keywords
- Bluetooth Low Energy, low-power wireless communication, energy consumption, throughput, battery life, coin cell batteries, bit error rate, sensor networks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.