Overview and Evaluation of Bluetooth Low Energy: An Emerging Low-Power Wireless Technology
Open accessThe DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
Bluetooth Low Energy (BLE) is an emerging low-power wireless technology developed for short-range control and monitoring applications that is expected to be incorporated into billions of devices in the next few years. This paper describes the main features of BLE, explores its potential applications, and investigates the impact of various critical parameters on its performance. BLE represents a trade-off between energy consumption, latency, piconet size, and throughput that mainly depends on parameters such as connInterval and connSlaveLatency. According to theoretical results, the lifetime of a BLE device powered by a coin cell battery ranges between 2.0 days and 14.1 years. The number of simultaneous slaves per master ranges between 2 and 5,917. The minimum latency for a master to obtain a sensor reading is 676 µs, although simulation results show that, under high bit error rate, average latency increases by up to three orders of magnitude. The paper provides experimental results that complement the theoretical and simulation findings, and indicates implementation constraints that may reduce BLE performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2. Theoretical lifetime of a slave for one-way and round-trip ATT message exchanges, and for different parameter configurations, based on CC2540 current measurements [11].](https://figures.cochat.ai/paper-figures/02304470230d427db90ed7f88e88237c/overview-and-evaluation-of-bluetooth-low-energy-an-emerging-low-power-wireless-figure-2.jpg)






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Haartsen, J. C. (2000) · IEEE Personal Communications · doi:10.1109/98.824570 · Cited by 643 · cited 1×
“BLE PROTOCOL STACK OVERVIEW Like in classic Bluetooth [7], the BLE protocol stack is composed of two main parts: the Controller and the Host.”
BackgroundApplications, challenges, and prospective in emerging body area networking technologies
Patel, M., & Wang, J. (2010) · IEEE Wireless Communications · doi:10.1109/mwc.2010.5416354 · Cited by 638 · cited 1×
“Healthcare, wellness and sports constitute an application domain where classic Bluetooth has already been used [14,15], and for which BLE constitutes an improvement [16].”
BackgroundWireless home automation networks: A survey of architectures and technologies
Gomez, C., & Paradells, J. (2010) · IEEE Communications Magazine · doi:10.1109/mcom.2010.5473869 · Cited by 557 · cited 1×
“been steadily gaining momentum in application domains that require multihop networking [2, 3].”
BackgroundSelf-citationMan-in-the-Middle Attack to the HTTPS Protocol
Callegati, F., Cerroni, W., & Ramilli, M. (2009) · IEEE Security & Privacy Magazine · doi:10.1109/msp.2009.12 · Cited by 347 · cited 1×
“When none of the first two methods can be used, the Just Works method is employed, although it is not authenticated and it does not provide protection against Man In The Middle (MITM) attacks [10].”
MethodExtending IP to Low-Power, Wireless Personal Area Networks
Hui, J. W., & Culler, D. E. (2008) · IEEE Internet Computing · doi:10.1109/mic.2008.79 · Cited by 280 · cited 1×
“In fact, the IETF 6LoWPAN Working Group (WG) [5] has already recognized the importance of BLE for the Internet of Things.”
BackgroundConnecting low-power and lossy networks to the internet
Ko, J., Terzis, A., Dawson-Haggerty, S., Culler, D. E., Hui, J. W., & Levis, P. (2011) · IEEE Communications Magazine · doi:10.1109/mcom.2011.5741163 · Cited by 207 · cited 1×
“While delivery delay may be tolerated for certain sensor measurement reading applications, a user that presses a button in a remote control is sensitive to delays greater than 500 ms [12].”
BackgroundReliability and Availability Evaluation of Wireless Sensor Networks for Industrial Applications
Silva, I., Guedes, L. A., Portugal, P., & Vasques, F. (2012) · Sensors · doi:10.3390/s120100806 · Cited by 189 · cited 1×
“4e specification [21].”
Continua: An Interoperable Personal Healthcare Ecosystem
Carroll, R., Cnossen, R., Schnell, M., & Simons, D. (2007) · IEEE Pervasive Computing · doi:10.1109/mprv.2007.72 · Cited by 159 · cited 1×
“In fact, the Continua Health Alliance, an industry coalition of healthcare and technology companies [17], announced the selection of BLE for “activity monitors and heart rate sensors to be used to monitor a user‟s health and fitness levels” [18].”
BackgroundBluetooth low energy: Wireless connectivity for medical monitoring
Omre, A. H., & Keeping, S. (2010) · Journal of Diabetes Science and Technology · doi:10.1177/193229681000400227 · Cited by 96 · cited 1×
“In fact, the Continua Health Alliance, an industry coalition of healthcare and technology companies [17], announced the selection of BLE for “activity monitors and heart rate sensors to be used to monitor a user‟s health and fitness levels” [18].”
BackgroundA Decentralized Scheduling Algorithm for Time Synchronized Channel Hopping
Tinka, A., Watteyne, T., & Pister, K. S. J. (2010) · Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering · doi:10.1007/978-3-642-17994-5_14 · Cited by 93
Cited by
Items 201–300 of 969
Simulation of network-level performance for Bluetooth Low Energy
Mikhaylov, K. (2014) · IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) · doi:10.1109/pimrc.2014.7136361 · Cited by 33
“Those made the two technologies not compatible [3], [4].”
BackgroundInfluentialA Wearable System for Real-Time Continuous Monitoring of Physical Activity
Taffoni, F., Rivera, D., Camera, A. L., Nicolò, A., Velasco, J. R., & Massaroni, C. (2018) · Journal of Healthcare Engineering · doi:10.1155/2018/1878354 · Cited by 42
“Particular attention was paid to keep the weight and the size factor of the system as small as possible and to select the electronics to be compatible with low-voltage power supply reducing as much as possible the overall power consumption of the system, as suggested by [52].”
BackgroundNkomo, M., Hancke, G. P., Abu-Mahfouz, A. M. I., Sinha, S., & Onumanyi, A. J. (2018) · Sensors · doi:10.3390/s18103215 · Cited by 34
“3 MAC and sub-GHz open and proprietary standards, which include 6LoWPAN [22], ZigBee [23], Bluetooth Low Energy [24], Wi-Fi, Thread [25], and ZWave [26].”
BackgroundInfluentialSurvey of Automated Fare Collection Solutions in Public Transportation
Bieler, M., Skretting, A., Budinger, P., & Grønli, T. (2022) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2022.3161606 · Cited by 44
“BLE has low energy consumption and enhanced range and is currently available in most smartphones [198].”
BackgroundBluetooth Low Energy for data streaming: Application-level analysis and recommendation
Giovanelli, D., Milosevic, B., & Farella, E. (2015) · International Workshop on Advances in Sensors and Interfaces (IWASI) · doi:10.1109/iwasi.2015.7184945 · Cited by 32
“In [21] similar theoretical results have been reported with the additions of experimental tests, which highlights that with a real device the application level throughput is 58.”
BackgroundA BLE-based data collection system for IoT
Boualouache, A., Nouali, O., Moussaoui, S., & Derder, A. (2015) · International Conference on New Technologies of Information and Communication (NTIC) · doi:10.1109/ntic.2015.7368748 · Cited by 32
“Indeed, according to a conducted study on Bluetooth Low Energy System-on-aChip module with a standard battery of 230 mAh, the battery can get up to 14 years in ideal conditions [20].”
García-Espinosa, E., Longoria‐Gandara, O., Pegueros-Lepe, I. I., & Veloz-Guerrero, A. (2018) · Electronics · doi:10.3390/electronics7120386 · Cited by 36
“The BLE protocol defines a network called piconet [3], formed by a central device (CD) or master and one or more peripheral devices (PD) or slaves.”
BackgroundMethodInfluentialEfficient Communication Scheme for Bluetooth Low Energy in Large Scale Applications
Nikodem, M., Słabicki, M., & Bawiec, M. A. (2020) · Sensors · doi:10.3390/s20216371 · Cited by 35
“Because the number of BLE devices using connection-based communication is limited [19,20], the practical IoT applications have to use connection-less mode.”
BackgroundWalk‐to‐Charge Technology: Exploring Efficient Energy Harvesting Solutions for Smart Electronics
Beniwal, R., Kalra, S., Beniwal, N. S., Mazumdar, H., Singhal, A. K., & Singh, S. K. (2023) · Journal of Sensors · doi:10.1155/2023/6614658 · Cited by 34
“Some of these protocols are suggested by Gomez et al. [90], Li et al. [91], Wang et al. [92], Haselsteiner and Breitfu ß [93], Sharma and Namuduri [94], Perez et al. [95], Bahillo et al. [96], Cente-naro et al. [97], and Catarinucci et al. [98] Challenges in power management for wearable sensors…”
BackgroundRousta, A., & Jafari, E. A. (2024) · Management of Environmental Quality An International Journal · doi:10.1108/meq-06-2023-0166 · Cited by 38
Transmission of ECG data with the patch-type ECG sensor system using Bluetooth Low Energy
Park, Y., & Cho, H. (2013) · International Conference on Information and Communication Technology Convergence (ICTC) · doi:10.1109/ictc.2013.6675359 · Cited by 36
“5ms to 4 seconds as mentioned in the BLE’s specification [10].”
BackgroundOpportunistic interaction in the challenged internet of things
Wirtz, H., Rüth, J., Serror, M., Link, J. Á. B., & Wehrle, K. (2014) · ACM Workshop on Challenged Networks (CHANTS) · doi:10.1145/2645672.2645679 · Cited by 31
“To the best of our knowledge, we are the first to a) provide a comprehensive BLE evaluation on commodity devices, complementing the evaluation of isolated radios and fixed parameters [4], and b) propose BLE for challenged networking.”
BackgroundInfluentialDong, B., Kjærgaard, M. B., Simone, M. D., Gunay, B., O’Brien, W., Mora, D., Dziedzic, J. W., & Zhao, J. (2017) · Springer eBooks · doi:10.1007/978-3-319-61464-9_4 · Cited by 31
Levy, A. A., Hong, J. W., Riliskis, L., Levis, P. A., & Winstein, K. (2016) · International Conference on Mobile Systems, Applications, and Services · doi:10.1145/2906388.2906414 · Cited by 30
“Curious readers can read more in several good overviews [10, 7] or the specification itself [5].”
BackgroundHan, K., Xing, H., Deng, Z., & Du, Y. (2018) · ISPRS International Journal of Geo-Information · doi:10.3390/ijgi7060232 · Cited by 34
“BLE has been designed to provide features such as a low cost and a low power consumption [17].”
Improved Distance Estimation with BLE Beacon Using Kalman Filter and SVM
Lam, C. H., Ng, P. C., & She, J. P. M. (2018) · International Conference on Communications · doi:10.1109/icc.2018.8423010 · Cited by 30
“However, Bluetooth signals [16] [17], similar any RF signals,”
BackgroundKumar, P., & Reddy, S. R. N. (2020) · CSI Transactions on ICT · doi:10.1007/s40012-020-00289-1 · Cited by 31
Vannieuwenborg, F., Verbrugge, S., & Colle, D. (2018) · Transactions on Emerging Telecommunications Technologies · doi:10.1002/ett.3308 · Cited by 33
Alam, M., Ahmed, N., Matam, R., & Barbhuiya, F. A. (2024) · Ad Hoc Networks · doi:10.1016/j.adhoc.2024.103437 · Cited by 33
Agent-Based Systems for Telerehabilitation: Strengths, Limitations and Future Challenges
Calvaresi, D., Schumacher, M., Marinoni, M., Hilfiker, R., Dragoni, A. F., & Buttazzo, G. (2017) · Lecture notes in computer science · doi:10.1007/978-3-319-70887-4_1 · Cited by 32
“Communication means Wearable devices for telerehabilitation are usually characterized by low-energy consumption communication means, as Bluetooth low-energy (BLE) [47] and Zigbee [48].”
BackgroundMulti-Residential Activity Labelling in Smart Homes with Wearable Tags Using BLE Technology
Mokhtari, G., Anvari‐Moghaddam, A., Zhang, Q., & Karunanithi, M. (2018) · Sensors · doi:10.3390/s18030908 · Cited by 29
“However, in the case of healthcare systems, especially those applied for aged care, it is recommended to use technologies that fulfill requirements such as low cost, low power, high accuracy and reliability, real time operation, and good resistance to fading (caused by multipath propagation) [25].”
BackgroundN-TWR: An accurate time-of-flight-based N-ary ranging protocol for Ultra-Wide band
Despaux, F., BOSSCHE, A. V. D., Jaffrès‐Runser, K., & Val, T. (2018) · Ad Hoc Networks · doi:10.1016/j.adhoc.2018.05.016 · Cited by 29
“In the context of WSNs, several localization systems based on BlueTooth Low Energy (BLE) [16] have been proposed: BlueCats, BlueSense, Estimote, Gelo, GlimWorm, Kontakt, Sensorberg, among others.”
MethodUse of the IQRF Technology in Internet-of-Things-Based Smart Cities
Bouzidi, M., Dalveren, Y., Cheikh, F. A., & Derawi, M. O. (2020) · IEEE Access · doi:10.1109/access.2020.2982558 · Cited by 30
“Although wireless communication technologies such as 6LoWPAN [13], Wi-Fi [14], [15], Bluetooth Low Energy (BLE) [16], and ZigBee [17], [18] have been widely used for IoT solutions in smart cities, limited coverage that they provide could be considered as a main concern [19].”
Bluetooth 5 performance analysis for inter-vehicular communications
Aza, A., Melendi, D., García, R., Pañeda, X. G., Pozueco, L., & Magaña, V. C. (2021) · Wireless Networks · doi:10.1007/s11276-021-02830-9 · Cited by 29
BLE power consumption estimation and its applications to smart manufacturing
Tei, R., Hiroyuki, Y., & Shimizu, T. (2015) · Annual Conference of the Society of Instrument and Control Engineers of Japan (SICE) · doi:10.1109/sice.2015.7285303 · Cited by 29
“We estimated the BLE average consumptive current IAVG using the equations (2), (3), (4) and (5) with the values in Table 1, and we obtained the results showed in Fig 10 and Table 2.”
MethodEnabling always on service discovery: Wifi neighbor awareness networking
Camps‐Mur, D., García-Villegas, E., López-Aguilera, E., Loureiro, P., Lambert, P., & Raissinia, A. (2015) · IEEE Wireless Communications · doi:10.1109/mwc.2015.7096294 · Cited by 29
A study in accuracy of time synchronization of BLE devices using connection-based event
Dian, F. J., Yousefi, A., & Somaratne, K. (2017) · IEEE Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON) · doi:10.1109/iemcon.2017.8117156 · Cited by 35
“Other circumstances that force the end of a connection event include the reception of two consecutive packets with bit errors by either the master or the slave, and the corruption of the access address field of a packet sent by any device [19].”
BackgroundBluetooth 5.0 throughput comparison for internet of thing usability a survey
Yaakop, M., Malik, I. A. A., Suboh, M. Z., Ramli, A. F., & Abu, M. (2017) · International Conference on Engineering Technology and Technopreneurship (ICE2T) · doi:10.1109/ice2t.2017.8215995 · Cited by 29
“An easy-to-deploy, cost-efficient, and low power solution is a key requirement in IoT [2-4].”
BackgroundInfluentialA Survey on Low Power Network Protocols for the Internet of Things and Wireless Sensor Networks
Barker, P., & Hammoudeh, M. A. A. (2017) · International Conference on Future Networks and Distributed Systems (ICFNDS) · doi:10.1145/3102304.3102348 · Cited by 28
Hussein, A. F., Hashim, S. J., Aziz, A. F. A., Rokhani, F. Z., & Adnan, W. A. W. (2017) · Journal of Ambient Intelligence and Humanized Computing · doi:10.1007/s12652-017-0560-y · Cited by 30
A Bluetooth-Low-Energy Sensor Node for Acoustic Monitoring of Small Birds
Magno, M., Vultier, F., Szebedy, B., Yamahachi, H., Hahnloser, R. H. R., & Luca Benini, C. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2940282 · Cited by 27
“a power budget that is an order of magnitude lower than similar circuits only a few years ago [1].”
BackgroundExploring Ticketing Approaches Using Mobile Technologies: QR Codes, NFC and BLE
Couto, R., Leal, J., Costa, P. M., & Galvao, T. (2015) · IEEE International Conference on Intelligent Transportation Systems (ITSC) · doi:10.1109/itsc.2015.9 · Cited by 27
“The most recent Bluetooth standard is called Bluetooth Smart, or Bluetooth Low Energy (BLE); it has several advantages over the traditional standard, such as lower power consumption and enhanced range [12, 13], and it is being adopted by the recently released smartphones.”
BackgroundAssessing Vulnerabilities in Bluetooth Low Energy (BLE) Wireless Network Based IoT Systems
Qu, Y., & Chan, P. K. (2016) · IEEE International Conference on Big Data Security on Cloud, IEEE International Conference on High Performance and Smart Computing, and IEEE International Conference on Intelligent Data and Security (BigDataSecurity/HPSC/IDS) · doi:10.1109/bigdatasecurity-hpsc-ids.2016.63 · Cited by 27
“Bluetooth low energy (BLE) [2] wireless network technology is now emerging as the low-power wireless technology of choice in many IoT applications [3, 4].”
BackgroundOn practical selective jamming of Bluetooth Low Energy advertising
Brauer, S., Zubow, A., Zehl, S., Roshandel, M., & Mashhadi-Sohi, S. (2016) · IEEE Conference on Standards for Communications and Networking · doi:10.1109/cscn.2016.7785169 · Cited by 41
“The prototypic implementation uses off-the-shelf embedded hardware which is low-cost, small-size and very power efficient.”
BackgroundLie, M. M. K., & Kusuma, G. P. (2020) · Neural Computing and Applications · doi:10.1007/s00521-020-05159-0 · Cited by 26
“Several benefits of using BLE are its low power consumption, low network latency, and high sampling rate [6, 7].”
BackgroundCumulative Message Authentication Codes for Resource-Constrained IoT Networks
Li, H., Kumar, V., Park, J.-M. J., & Yang, Y. (2021) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3074054 · Cited by 35
A Flexible Multi-Functional Touch Panel for Multi-Dimensional Sensing in Interactive Displays
Gao, S., & Nathan, A. (2019) · Cambridge University Press eBooks · doi:10.1017/9781108686532 · Cited by 27
“Voice recognition is another technique for remote interactivity [18].”
MethodApplying Seamful Design in Location-Based Mobile Museum Applications
Nilsson, T., Hogsden, C., Perera, C., Aghaee, S., Scruton, D., Lund, A., & Blackwell, A. F. (2016) · ACM Transactions on Multimedia Computing Communications and Applications · doi:10.1145/2962720 · Cited by 26
“Given that BLE is expected to be supported by billions of mobile devices in the near future [West 2013] and achieve a strong presence in several market segments [Gomez et al. 2012], it seems inevitable that similar experiences are about to play an increasingly important role in our lives.”
BackgroundA security evaluation of popular Internet of Things protocols for manufacturers
Celebucki, D., Lin, M. A., & Graham, S. (2018) · International Conference on Consumer Electronics · doi:10.1109/icce.2018.8326099 · Cited by 26
“device that has been provided with the encryption key [19].”
BackgroundMethodInfluentialJoint computing, communication and cost-aware task offloading in D2D-enabled Het-MEC
Abbas, N., Sharafeddine, S., Mourad, A., Abou‐Rjeily, C., & Fawaz, W. F. (2022) · Computer Networks · doi:10.1016/j.comnet.2022.108900 · Cited by 25
Design Space Exploration for Ultra-Low-Energy and Secure IoT MCUs
Aerabi, E., Bohlouli, M., Ahmadilivani, M. H., Fazeli, M., Papadimitriou, A., & Hély, D. (2020) · ACM Transactions on Embedded Computing Systems · doi:10.1145/3384446 · Cited by 26
“In ultra-low-power cases, the IoT device may connect to a close proxy device (e.g., a cell phone) using an ultra-low-power wireless communication technology (e.g., Bluetooth Low Energy—BLE [10]) which relays information back and forth between the IoT device and the remote server or cloud system [8].”
BackgroundYaseen, M., Saleem, K., Orgun, M. A., Derhab, A., Abbas, H., Al-Muhtadi, J. F., Iqbal, W., & Rashid, I. (2017) · Telematics and Informatics · doi:10.1016/j.tele.2017.08.005 · Cited by 55
DACIoT: Dynamic Access Control Framework for IoT Deployments
Alkhresheh, A., Elgazzar, K., & Hassanein, H. S. (2020) · IEEE Internet of Things Journal · doi:10.1109/jiot.2020.3002709 · Cited by 33
“(BLE) [33] to scan and discover available IoT devices and”
BackgroundA two-stage game theoretical approach for interference mitigation in Body-to-Body Networks
Meharouech, A., Elias, J., & Mehaoua, A. (2015) · Computer Networks · doi:10.1016/j.comnet.2015.12.001 · Cited by 24
“Bluetooth Low Energy (BLE) standard [5], which defines three channels as advertising channels, used for device discovery and connection establishment, and have been assigned center frequencies that minimize overlapping with”
BackgroundSemwal, T., & Nair, S. B. (2016) · Electronics · doi:10.3390/electronics5040072 · Cited by 25
“Bluetooth Low Energy (BLE) technologies [54] can offer a far more superior solution than RFIDs.”
BackgroundEnergy-Efficient BLE Device Discovery for Internet of Things
Chen, B.-R., Cheng, S., & Lin, J.-J. (2017) · International Symposium on Computing and Networking · doi:10.1109/candar.2017.95 · Cited by 24
“How to detect enough number of IoT devices so that discovery latency is constrained without incurring unnecessary waste on energy is a critical issue [4], [5].”
BackgroundResilient Privacy Protection for Location-Based Services through Decentralization
Jin, H., & Papadimitratos, P. (2019) · ACM Transactions on Privacy and Security · doi:10.1145/3319401 · Cited by 24
“WiFi-Direct [7] and Bluetooth [25] can be used for P2P communication, supported by most off-the-shelf smartphones nowadays.”
Localization and Indoor Navigation for Visually Impaired Using Bluetooth Low Energy
Nagarajan, B., Valliappan, S., Narayanan, V. A., & Sivakumar, P. B. (2019) · Smart innovation, systems and technologies · doi:10.1007/978-981-13-8406-6_25 · Cited by 24
González, E., Peña, R., Vargas‐Rosales, C., Ávila, A., & de Cerio, D. P. D. (2015) · Sensors · doi:10.3390/s150511993 · Cited by 24
“LATENCY [33,39,42] <3 ms <5 ms (beaconless mode, at 250 kbps) 1.”
MethodInfluentialde Blasio, G., Rodríguez-Rodríguez, J. C., García, C. R., & Quesada-Arencibia, A. (2019) · Sensors · doi:10.3390/s19143087 · Cited by 27
State-of-the-Art of Industrial Wearables: A Systematic Review
Svertoka, E., Rusu-Casandra, A., & Marghescu, I. (2020) · International Conference on Communications (COMM) · doi:10.1109/comm48946.2020.9141982 · Cited by 28
“Nowadays, more popular than basic Bluetooth protocol is its simplified lowenergy version BLE [18].”
InfluentialAzpilicueta, L., López-Iturri, P., Aguirre, E., Mateo, I., Astráin, J. J., Villadangos, J., & Falcone, F. (2014) · Sensors · doi:10.3390/s141223650 · Cited by 23
“It must be pointed out that the data of BLE and classic Bluetooth has been obtained from the literature [31].”
Tree network based on Bluetooth 4.0 for wireless sensor network applications
Maharjan, B. K., Witkowski, U., & Zandian, R. (2014) · European Embedded Design in Education and Research Conference (EDERC) · doi:10.1109/ederc.2014.6924382 · Cited by 23
“This node can be viewed as a gateway sensor or a data collecting center in analogy to WSNs.”
BackgroundTowards bounded-latency Bluetooth Low Energy for in-vehicle network cable replacement
Kandhalu, A., Xhafa, A. E., & Hosur, S. (2013) · International Conference on Connected Vehicles and Expo · doi:10.1109/iccve.2013.6799869 · Cited by 23
BLE and IEEE 802.15.4 in the IoT: Evaluation and Interoperability Considerations
Narendra, P., Duquennoy, S., & Voigt, T. (2016) · Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering · doi:10.1007/978-3-319-47075-7_47 · Cited by 23
“Above the link layer the BLE stack consists of the Logical Link Control and Adaptation Protocol (L2CAP), the Attribute Protocol (ATT), the Generic Attribute Profile (GATT), the Security Manager Protocol (SMP) and the Generic Access Profile (GAP) [12].”
MethodThree-dimensional positioning system using Bluetooth low-energy beacons
Park, H., Noh, J., & Cho, S. (2016) · International Journal of Distributed Sensor Networks · doi:10.1177/1550147716671720 · Cited by 23
“If the sphere equation is validated, a central point of the sphere is calculated by equation (11).”
BackgroundA method for the analysis and visualization of clinical workflow in dynamic environments
Vankipuram, A., Traub, S. J., & Patel, V. L. (2018) · Journal of Biomedical Informatics · doi:10.1016/j.jbi.2018.01.007 · Cited by 27
Clustered Crowd GPS for Privacy Valuing Active Localization
Yücel, F., & Bulut, E. (2018) · IEEE Access · doi:10.1109/access.2018.2830300 · Cited by 23
“However, user check-outs were not available for the locations, thus, we decide visit durations uniformly from a range of [5-15] minutes.”
BackgroundA Model-based Approach for Managing Criticality Requirements in e-Health IoT Systems
Kotronis, C., Νικολαϊδου, Μ., Dimitrakopoulos, G. J., Anagnostopoulos, D., Amira, A., & Bensaali, F. (2018) · International Conference on System of Systems Engineering · doi:10.1109/sysose.2018.8428764 · Cited by 24
“The Sensor transmits these data using fast, low-power and short-range wireless communication protocols, like Bluetooth Low Energy (BLE) [28] or ZigBee [29].”
MethodQureshi, U. M., Umair, Z., Duan, Y., & Hancke, G. P. (2018) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2018.8433787 · Cited by 23
“Due to its ubiquitousness, BLE is now widely considered for wireless Indoor Localization Systems (ILS) [5].”
BackgroundMethodInfluentialPark, J., & Cho, Y. K. (2017) · Journal of Computing in Civil Engineering · doi:10.1061/(asce)cp.1943-5487.0000658 · Cited by 22
Indoor Positioning inside an Office Building Using BLE
Radoi, I., Guțu-Robu, G., Rebedea, T. E., Neagu, C., & Popa, M. F. (2017) · International Conference on Control Systems and Computer Science · doi:10.1109/cscs.2017.29 · Cited by 22
“0+ [2], also called Bluetooth Smart, allowed the integration of Bluetooth transmitters into small devices, whose batteries store energy for a very long period of time.”
BackgroundModeling the Connectivity of Data-Channel-Based Bluetooth Low Energy Mesh Networks
Darroudi, S. M., & Gómez, C. (2018) · IEEE Communications Letters · doi:10.1109/lcomm.2018.2864994 · Cited by 22
“BLE defines a complete protocol architecture [11].”
Mavrogiorgou, A., Kiourtis, A., & Kyriazis, D. (2019) · Evolving Systems · doi:10.1007/s12530-019-09286-5 · Cited by 22
“To this end, it should be noted that this interface is based upon the new Bluetooth Low-Energy (BLE) (Gomez et al. 2012), which is a core protocol for IoT applications, having become the most commonly used protocol in the era of IoT.”
MethodA Survey of Short-Range Wireless Communication for Ultra-Low-Power Embedded Systems
Baker, B. O., Woods, J., Reed, M. J., & Afford, M. (2024) · Journal of Low Power Electronics and Applications · doi:10.3390/jlpea14020027 · Cited by 26
“[40] shows that a round trip with a connection interval of 375 ms has an estimated lifespan of 2 years, while a connection interval of 4000 ms has a lifespan of 12 years using a CC2540 (SoC) for Bluetooth low-energy applications [40].”
MethodWiazowski, J. (2014) · Assistive Technology · doi:10.1080/10400435.2014.928389 · Cited by 22
Design and implementation of simulator for analysis of BLE broadcast signal collision
Shan, G., Lee, B.-U., Shin, S., & Roh, B. (2017) · International Conference on Information Networking · doi:10.1109/icoin.2017.7899533 · Cited by 22
“The specification of the Bluetooth system defines only three channels (index=37, 38, 39) is used for BLE broadcasting [13].”
MethodTwistIn: Tangible Authentication of Smart Devices via Motion Co-analysis with a Smartwatch
Leung, H.-M. C., Fu, C., & Heng, P. (2018) · Proceedings of the ACM on Interactive Mobile Wearable and Ubiquitous Technologies · doi:10.1145/3214275 · Cited by 27
“Devices equipped with Bluetooth Low Energy [17] such as Apple’s iBeacon [3] and Google’s Eddystone [1] enable proximity sensing by measuring the received signal strength indicator and using a path loss model [16].”
MethodAn NB-IoT-based smart trash can system for improved health in smart cities
Zhu, Y., Jia, G., Han, G., Zhou, Z., & Guizani, M. (2019) · International Wireless Communications and Mobile Computing Conference (IWCMC) · doi:10.1109/iwcmc.2019.8766748 · Cited by 26
Hale, M. L., Ellis, D., Gamble, R., Waler, C., & Lin, J. (2015) · IEEE International Conference on Mobile Services · doi:10.1109/mobserv.2015.23 · Cited by 26
“Bluetooth Low Energy (BLE) [11, 38, 39], or “Bluetooth Smart”, is a scaled down version of the standard Bluetooth protocol designed for communication with small, powerconstrained, hardware.”
BackgroundBluetooth low energy for indoor positioning: Challenges, algorithms and datasets
Ghaemifar, M., Motie, S., Moosaviun, S. M., Nemati, Y., & Ebadollahi, S. (2025) · Automation in Construction · doi:10.1016/j.autcon.2025.106316 · Cited by 21
Maruyama, K., Kawakami, Y., & Narita, F. (2022) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/ac7d96 · Cited by 23
Hybrid Indoor Positioning Method of BLE and Monocular VINS-Based Smartphone
Kong, X., Wu, C. W., You, Y., Lv, Z., & Zhao, Z. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3295010 · Cited by 28
“BLE is part of Bluetooth 4.0 [31], which uses the 2.4-GHz radio-frequency and features low power consumption, low delay, low cost, and compatibility with smartphones and computers [39].”
BackgroundInfluentialPrasanna, D. L., & Tripathi, S. L. (2024) · Wireless Personal Communications · doi:10.1007/s11277-024-10897-8 · Cited by 23
“[24, 31] and [53].”
A Real-time BLE Enabled ECG System for Remote Monitoring
Touati, F., Tabish, R., & Mnaouer, A. B. (2013) · APCBEE Procedia · doi:10.1016/j.apcbee.2013.08.022 · Cited by 21
Agadakos, I., Polakis, J., & Portokalidis, G. (2017) · International Conference on Mobile Systems, Applications, and Services · doi:10.1145/3081333.3081345 · Cited by 21
“It has taken off after the release of Bluetooth Low Energy (BLE), which allows near-range communication with a sig-nificantly reduced power consumption [31], as it facilitated the creation of small, battery-powered, BLE-enabled tags that can be easily attached to objects, or worn by people and pets.”
BackgroundChapron, K., Plantevin, V., Thullier, F., Bouchard, K., Duchesne, É., & Gaboury, S. (2018) · Sensors · doi:10.3390/s18010268 · Cited by 24
“This choice was mainly motivated because such a technology was meant to enable low power wireless communications [26].”
BackgroundBIIT: Standardization of Blockchain-based I2oT Systems in the I4 Era
Niya, S. R., Schiller, E., Cepilov, I., & Stiller, B. (2020) · IEEE/IFIP Network Operations and Management Symposium (NOMS) · doi:10.1109/noms47738.2020.9110379 · Cited by 21
“There is an increasing attention focused on the BIoT-integrated systems [27] supporting various technologies such as supply chain monitoring [32], [35], smart industries [45], and industrial pollution monitoring [36].”
BackgroundA Review of Moving Target Defense Mechanisms for Internet of Things Applications
Saputro, N., Tonyalı, S., Aydeger, A., Akkaya, K., Rahman, M. A., & Uluagac, A. S. (2020) · Wiley eBooks · doi:10.1002/9781119593386.ch24 · Cited by 24
BLISP: Enhancing backscatter radio with active radio for computational RFIDs
Veen, I. I., Liu, Q., Pawełczak, P., Parks, A. N., & Smith, J. R. (2016) · IEEE International Conference on RFID · doi:10.1109/rfid.2016.7488010 · Cited by 20
“Most low power wireless sensor nodes use active radio transmission techniques, such as Bluetooth Low Energy [2], to transport data.”
BackgroundInfluentialIPv6 WSN solution for integration and interoperation between smart home and AAL systems
Palma, L., Pernini, L., Belli, A., Valenti, S., Maurizi, L., & Pierleoni, P. (2016) · IEEE Sensors Applications Symposium (SAS) · doi:10.1109/sas.2016.7479840 · Cited by 20
“Among many protocol and solution investigated the widely spread and the most commercial are Bluetooth Low Energy [5] [6] and ZigBee [7].”
BackgroundA Survey on Energy Efficient Wireless Sensor Networks for Bicycle Performance Monitoring Application
Gharghan, S. K., Nordin, R., & Ismail, M. B. (2014) · Journal of Sensors · doi:10.1155/2014/153604 · Cited by 21
“BLE enjoys several advantages over classic Bluetooth, which areas follows: (i) it is designed to transmit data at very low latency 15 times more efficiently than classic Bluetooth, (ii) only three channels are used for advertising, whereas 32 channels for classic Bluetooth, making BLE over 17 times more efficient than…”
BackgroundA Versatile Architecture for Building IoT Quantified-Self Applications
Menychtas, A., Doukas, C. N., Tsanakas, P. D., & Maglogiannis, I. G. (2017) · Proceedings - IEEE Symposium on Computer-Based Medical Systems · doi:10.1109/cbms.2017.80 · Cited by 21
Design and validation of an e-textile-based wearable system for remote health monitoring
Coccia, A., Amitrano, F., Donisi, L., Cesarelli, G., Pagano, G., Cesarelli, M., & D’Addio, G. (2021) · ACTA IMEKO · doi:10.21014/acta_imeko.v10i2.912 · Cited by 21
“In fact, BLE technology presents a perfect trade-off between energy consumption, latency, piconet size, and throughput [20].”
BackgroundDevice-to-Device Communications Underlaying an Uplink SCMA System
Kim, H. M., Nguyen, H. V., Kang, G.-M., Shin, Y., & Shin, O. (2019) · IEEE Access · doi:10.1109/access.2019.2896582 · Cited by 22
A Smart Motor Rehabilitation System Based on the Internet of Things and Humanoid Robotics
Moghbelan, Y., Esposito, A., Zyrianoff, I., Spaletta, G., Stefano Borgo, A., Masolo, C., Ballarin, F., Seidita, V., Toni, R., Barbaro, F., et al. (2024) · Applied Sciences · doi:10.3390/app142411489 · Cited by 23
Bluetooth low energy for inter-vehicular communications
Bronzi, W., Frank, R., Castignani, G., & Engel, T. (2014) · IEEE Vehicular Networking Conference (VNC) · doi:10.1109/vnc.2014.7013351 · Cited by 19
“In Section VI we conclude the paper and provide directions for future work.”
BackgroundAnalysis of low energy consumption wireless sensor with BLE
Feng, Z., Mo, L., & Li, M. (2015) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/icsens.2015.7370563 · Cited by 19
Performance Analysis Of Bluetooth Low Energy Mesh Routing Algorithm In Case Of Disaster Prediction
Gogić, A., Mujčić, A., Ibrić, S., & Suljanović, N. (2016) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1124689 · Cited by 19
A Solar Energy Harvester with an Improved MPPT Circuit for Wearable IoT Applications
Wu, T., Arefin, M. S., Redouté, J., & Yuce, M. R. (2017) · International Conference on Body Area Networks · doi:10.4108/eai.15-12-2016.2267622 · Cited by 19
A novel security scheme for Body Area Networks compatible with smart vehicles
Wang, J., Han, K., Alexandridis, A., Žilić, Ž., Pang, Y., Wu, W., Din, S., & Jeon, G. (2018) · Computer Networks · doi:10.1016/j.comnet.2018.07.005 · Cited by 19
A Systematic Review of Radio Frequency Threats in IoMT
Jayaraj, I. A., Shanmugam, B., Azam, S., & Samy, G. N. (2022) · Journal of Sensor and Actuator Networks · doi:10.3390/jsan11040062 · Cited by 22
“The present-day wireless attacks are not limited to NFC (near field communication) [5], (BLE) bluetooth low energy [6], LTE (long-term evolution) [7], RF (radio frequency) [8], Wi-Fi (wireless fidelity), GPS (global positioning satellite), or SATCOM (satellite communications) but extend to other wireless spectrum tech…”
BackgroundIfNot: An approach towards mitigating interest flooding attacks in Named Data Networking of Things
Bilgili, S., Demir, A. K., & Alam, S. (2024) · Internet of Things · doi:10.1016/j.iot.2024.101076 · Cited by 20
Experimental Study of Bluetooth Indoor Positioning Using RSS and Deep Learning Algorithms
Wu, C., Wong, I. C., Wang, Y., Ke, W., & Yang, X. (2024) · Mathematics · doi:10.3390/math12091386 · Cited by 18
Aguirre, E., López-Iturri, P., Azpilicueta, L., Garasa, C. R., Astráin, J. J., Villadangos, J., & Falcone, F. (2016) · International Journal of Distributed Sensor Networks · doi:10.1177/1550147716668063 · Cited by 22
Smart-Lock Security Re-engineered Using Cryptography and Steganography
Bapat, C., Baleri, G., Inamdar, S., & Nimkar, A. V. (2017) · Communications in computer and information science · doi:10.1007/978-981-10-6898-0_27 · Cited by 22
“elds are then encrypted. Authenticated data is passed over an unencrypted channel by using digital signatures. An algorithm which makes use of a 128-bit AES block cipher helps generate the signature [2]. A counter is given as one of the inputs to this algorithm, that gives protection against various replay attacks. It…”
MethodBaek, S. H., & Cha, S. H. (2018) · Building and Environment · doi:10.1016/j.buildenv.2018.12.030 · Cited by 20
On the System-level Performance Evaluation of Bluetooth 5 in IoT: Open Office Case Study
Badihi, B., Ghavimi, F., & Jäntti, R. (2019) · International Symposium on Wireless Communication Systems · doi:10.1109/iswcs.2019.8877223 · Cited by 18
“Discovery performance of the BLE was studied in [13] while the performance of the protocol was discussed in [14] and [15].”
MethodRahimzadeh, C. Y., Salih, A., & Barzinjy, A. A. (2022) · Sustainability · doi:10.3390/su14031723 · Cited by 18
RetractedCzeczot, G., Rojek, I., & Mikołajewski, D. (2023) · Electronics · doi:10.3390/electronics12112503 · Cited by 19
“The Bluetooth mesh profile is an exception to this rule and is based on a General Access Profile (GAP) [1].”
BackgroundMethod
Metadata
- Authors
- Gomez, C., Oller, J., & Paradells, J.
- Affiliations
- Universitat Politècnica de Catalunya/Fundació i2Cat, C/Esteve Terradas, 7, Castelldefels 08860, Spain
- i2CAT (ES)
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2012-08-29
- Volume
- 12
- Issue
- 9
- Pages
- 11734-11753
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC3478807
- OpenAlex
- W1971130353
- Cited by
- 967
- References
- 17
- Citations by year
- 2026: 34 · 2025: 51 · 2024: 48 · 2023: 42 · 2022: 47 · 2021: 68 · 2020: 100 · 2019: 105 · 2018: 128 · 2017: 120 · 2016: 108 · 2015: 68 · 2014: 34 · 2013: 13
- FWCI
- 48.24
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Wireless Body Area Networks
- Physical Sciences › Computer Science › Computer Networks and Communications › Energy Efficient Wireless Sensor Networks
- Keywords
- Bluetooth Low Energy, low-power wireless communication, energy consumption, throughput, battery life, coin cell batteries, bit error rate, sensor networks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.