Overview and Evaluation of Bluetooth Low Energy: An Emerging Low-Power Wireless Technology
Open accessThe DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
Bluetooth Low Energy (BLE) is an emerging low-power wireless technology developed for short-range control and monitoring applications that is expected to be incorporated into billions of devices in the next few years. This paper describes the main features of BLE, explores its potential applications, and investigates the impact of various critical parameters on its performance. BLE represents a trade-off between energy consumption, latency, piconet size, and throughput that mainly depends on parameters such as connInterval and connSlaveLatency. According to theoretical results, the lifetime of a BLE device powered by a coin cell battery ranges between 2.0 days and 14.1 years. The number of simultaneous slaves per master ranges between 2 and 5,917. The minimum latency for a master to obtain a sensor reading is 676 µs, although simulation results show that, under high bit error rate, average latency increases by up to three orders of magnitude. The paper provides experimental results that complement the theoretical and simulation findings, and indicates implementation constraints that may reduce BLE performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2. Theoretical lifetime of a slave for one-way and round-trip ATT message exchanges, and for different parameter configurations, based on CC2540 current measurements [11].](https://figures.cochat.ai/paper-figures/02304470230d427db90ed7f88e88237c/overview-and-evaluation-of-bluetooth-low-energy-an-emerging-low-power-wireless-figure-2.jpg)






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Haartsen, J. C. (2000) · IEEE Personal Communications · doi:10.1109/98.824570 · Cited by 643 · cited 1×
“BLE PROTOCOL STACK OVERVIEW Like in classic Bluetooth [7], the BLE protocol stack is composed of two main parts: the Controller and the Host.”
BackgroundApplications, challenges, and prospective in emerging body area networking technologies
Patel, M., & Wang, J. (2010) · IEEE Wireless Communications · doi:10.1109/mwc.2010.5416354 · Cited by 638 · cited 1×
“Healthcare, wellness and sports constitute an application domain where classic Bluetooth has already been used [14,15], and for which BLE constitutes an improvement [16].”
BackgroundWireless home automation networks: A survey of architectures and technologies
Gomez, C., & Paradells, J. (2010) · IEEE Communications Magazine · doi:10.1109/mcom.2010.5473869 · Cited by 557 · cited 1×
“been steadily gaining momentum in application domains that require multihop networking [2, 3].”
BackgroundSelf-citationMan-in-the-Middle Attack to the HTTPS Protocol
Callegati, F., Cerroni, W., & Ramilli, M. (2009) · IEEE Security & Privacy Magazine · doi:10.1109/msp.2009.12 · Cited by 347 · cited 1×
“When none of the first two methods can be used, the Just Works method is employed, although it is not authenticated and it does not provide protection against Man In The Middle (MITM) attacks [10].”
MethodExtending IP to Low-Power, Wireless Personal Area Networks
Hui, J. W., & Culler, D. E. (2008) · IEEE Internet Computing · doi:10.1109/mic.2008.79 · Cited by 280 · cited 1×
“In fact, the IETF 6LoWPAN Working Group (WG) [5] has already recognized the importance of BLE for the Internet of Things.”
BackgroundConnecting low-power and lossy networks to the internet
Ko, J., Terzis, A., Dawson-Haggerty, S., Culler, D. E., Hui, J. W., & Levis, P. (2011) · IEEE Communications Magazine · doi:10.1109/mcom.2011.5741163 · Cited by 207 · cited 1×
“While delivery delay may be tolerated for certain sensor measurement reading applications, a user that presses a button in a remote control is sensitive to delays greater than 500 ms [12].”
BackgroundReliability and Availability Evaluation of Wireless Sensor Networks for Industrial Applications
Silva, I., Guedes, L. A., Portugal, P., & Vasques, F. (2012) · Sensors · doi:10.3390/s120100806 · Cited by 189 · cited 1×
“4e specification [21].”
Continua: An Interoperable Personal Healthcare Ecosystem
Carroll, R., Cnossen, R., Schnell, M., & Simons, D. (2007) · IEEE Pervasive Computing · doi:10.1109/mprv.2007.72 · Cited by 159 · cited 1×
“In fact, the Continua Health Alliance, an industry coalition of healthcare and technology companies [17], announced the selection of BLE for “activity monitors and heart rate sensors to be used to monitor a user‟s health and fitness levels” [18].”
BackgroundBluetooth low energy: Wireless connectivity for medical monitoring
Omre, A. H., & Keeping, S. (2010) · Journal of Diabetes Science and Technology · doi:10.1177/193229681000400227 · Cited by 96 · cited 1×
“In fact, the Continua Health Alliance, an industry coalition of healthcare and technology companies [17], announced the selection of BLE for “activity monitors and heart rate sensors to be used to monitor a user‟s health and fitness levels” [18].”
BackgroundA Decentralized Scheduling Algorithm for Time Synchronized Channel Hopping
Tinka, A., Watteyne, T., & Pister, K. S. J. (2010) · Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering · doi:10.1007/978-3-642-17994-5_14 · Cited by 93
Cited by
Items 301–400 of 969
Networking solutions for connecting bluetooth low energy devices - a comparison
Labib, M. I., Ghalwash, A. Z., Abdulkader, S. N., & Elgazzar, M. M. A. (2019) · MATEC Web of Conferences · doi:10.1051/matecconf/201929202003 · Cited by 17
Systematic literature review of ambient assisted living systems supported by the Internet of Things
Caballero, P., Ortiz, G., & Medina‐Bulo, I. (2023) · Universal Access in the Information Society · doi:10.1007/s10209-023-01022-w · Cited by 20
“BLE is a variation of traditional Bluetooth oriented to energy efficiency and connection speed [15].”
Development of a Digital and Battery-Free Smart Flowmeter
Wang, H., & García, R. (2014) · Energies · doi:10.3390/en7063695 · Cited by 18
“Energy harvesters produces power from the local environment, eliminating batteries in wireless sensors [19].”
BackgroundMenychtas, A., Tsanakas, P. D., & Maglogiannis, I. G. (2016) · Healthcare Technology Letters · doi:10.1049/htl.2015.0054 · Cited by 17
mSync: Physical Layer Frame Synchronization without Preamble Symbols
Bloessl, B., & Dressler, F. (2018) · IEEE Transactions on Mobile Computing · doi:10.1109/tmc.2018.2808968 · Cited by 17
“(BLE) standard, whose energy efficiency results mainly from changes on the link and network layer [20].”
BackgroundRadio Beacons in Indoor Navigation
Vaščák, J., & Savko, I. (2018) · World Symposium on Digital Intelligence for Systems and Machines (DISA) · doi:10.1109/disa.2018.8490529 · Cited by 17
“0 and its roots can be traced back to 2006 under the name Wibree [11].”
BackgroundInfluentialSaban, M., Medus, L. D., Berga, S. C., Aghzout, O., & Rosado-Muñoz, A. (2021) · Sensors · doi:10.3390/s21020491 · Cited by 17
“The BLE Controller perform the encryption function by generating 128-bit encrypted data from a 128-bit key, and 128-bit plain-text data using the AES-128-bit block cipher as defined in the Federal Information Processing Standards Publication FIPS-1971 [28].”
BackgroundInfluentialAn ASIC Implementation of Security Scheme for Body Area Networks
Wang, J., Han, K., Alexandridis, A., Žilić, Ž., Pang, Y., & Lin, J. (2018) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2018.8351098 · Cited by 17
“Firstly, when compared to Bluetooth Low Energy (BLE) [26], BAN is exchanging data at a much lower rate, since it is unnecessary to request biometric data from a node at thousands of times per second.”
BackgroundBluetooth Low Energy Devices Security Testing Framework
Ray, A., Raj, V., Manuel Oriol, B., Monot, A., & Obermeier, S. (2018) · IEEE International Conference on Software Testing, Verification and Validation (ICST) · doi:10.1109/icst.2018.00045 · Cited by 17
“The typical requirement for communication is a pairing process [23].”
BackgroundPersonal Environmental Monitoring System and network platform
Cho, H. (2015) · International Conference on Sensing Technology · doi:10.1109/icsenst.2015.7438496 · Cited by 17
“So, the PEMS can use a secondary communication channel, such as Bluetooth LE [7], ZigBee, Thread [8], 6LoWPAN [9], or an ultra low-power (ULP) radio like IEEE 802.”
MethodSivakumaran, P., & Blasco, J. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1808.03778 · Cited by 17
“Its focus on resource-constrained devices has made BLE highly suited for IoT applications [2], including personal health and fitness monitoring [3], asset tracking [4], vehicular management [5], and home automation and security [6].”
BackgroundBluetooth Low Energy (BLE) Security and Privacy
Zhang, Y., Weng, J., Dey, R. K., & Fu, X. (2019) · Springer eBooks · doi:10.1007/978-3-319-32903-1_298-1 · Cited by 17
Gupta, S., Mamodiya, U., & Al-Gburi, A. J. A. (2025) · Automation · doi:10.3390/automation6030025 · Cited by 24
Osaba, E., Pierdicca, R., Malinverni, E. S., Khromova, A., Álvarez, F. J., & Bahillo, A. (2018) · ISPRS International Journal of Geo-Information · doi:10.3390/ijgi7050190 · Cited by 16
“BLE is a relatively new wireless technology developed by the Bluetooth Special Interest Group as a low-power solution, which may contribute to connecting a dramatically large number of devices to the Internet of Things [27].”
BackgroundAnalyzing power consumption and characterizing user activities on smartwatches: summary
Poyraz, E., & Memik, G. (2016) · IEEE International Symposium on Workload Characterization · doi:10.1109/iiswc.2016.7581282 · Cited by 16
“BLE (Bluetooth low energy) technology used in all our target devices and it keeps the network energy consumption low [4] when compared to other hardware components.”
BackgroundImproving the efficiency and responsiveness of smart objects using adaptive BLE device discovery
Renzler, T., Spörk, M., Boano, C. A., & Römer, K. (2018) · doi:10.1145/3213299.3213306 · Cited by 16
“[13] evaluate the performance of BLE connections and mention that the connection interval and slave latency parameters could be adapted at runtime to realize high-level application metrics.”
BackgroundResource Shared Galois Field Computation for Energy Efficient AES/CRC in IoT Applications
Noor, S. M., & John, E. B. (2019) · IEEE Transactions on Sustainable Computing · doi:10.1109/tsusc.2019.2943878 · Cited by 16
“A 100.0 MHz clock can support a maximum data throughput of 25.6 Mbps, which exceeds the requiremnts of Bluetooth 4.0 Low Energy [23], the popular low power IEEE 802.15.4 protocol ZigBee [10] and most internet enabled IoT devices.”
BackgroundInfluentialA Novel Drone-based Search and Rescue System using Bluetooth Low Energy Technology
Hashmi, A. M. (2021) · Engineering Technology & Applied Science Research · doi:10.48084/etasr.4104 · Cited by 16
“Another option would be to set the slave devices to sleep mode by default to save energy [22].”
BackgroundTouati, F., Erdene‐Ochir, O., Mehmood, W., Hassan, A., Mnaouer, A. B., Gaabab, B., Rasid, M. F. A., & Khriji, L. (2015) · International Journal of Distributed Sensor Networks · doi:10.1155/2015/645781 · Cited by 16
“…on BLE consider the specifications provided by the manufacturer [15, 16], while the proposed performance evaluations mostly consider WSNs, do not deal with medical data [17, 18], focus on the energy consumption aspect only [19], or study the feasibility of BLE in healthcare applications [20, 21].”
BackgroundMethodInfluentialSelection probability of data channels in Bluetooth Low Energy
Kalaa, M. O. A., & Refai, H. H. (2015) · International Wireless Communications and Mobile Computing Conference (IWCMC) · doi:10.1109/iwcmc.2015.7289073 · Cited by 16
Acoustic Wake-Up Receivers for Home Automation Control Applications
Bannoura, A., Höflinger, F., Gorgies, O., Gamm, G. U., Albesa, J., & Reindl, L. M. (2016) · Electronics · doi:10.3390/electronics5010004 · Cited by 16
SDN-based service automation for IoT
Uddin, M., Mukherjee, S., Chang, H., & Lakshman, T. V. (2017) · IEEE International Conference on Network Protocols (ICNP) · doi:10.1109/icnp.2017.8117555 · Cited by 16
“This popularity of BLE stems from its two key attributes [4]: (i) a low power physical and data link layer suited to low cost devices with long operating life on battery, (ii) a transaction oriented service layer, comprising of Attribute Protocol (ATT) and Generic”
BackgroundSimultaneously ensuring smartness, security, and energy efficiency in Internet-of-Things sensors
Akmandor, A. O., Yin, H., & Jha, N. K. (2018) · Custom Integrated Circuits Conference · doi:10.1109/cicc.2018.8357069 · Cited by 19
“4 GHz Industrial Scientific Medical (ISM) band [11].”
BackgroundUtilizing HoloLens to Support Industrial Service Processes
Aleksy, M., Troost, M., Scheinhardt, F., & Zank, G. T. (2018) · International Conference on Advanced Information Networking and Applications (AINA) · doi:10.1109/aina.2018.00033 · Cited by 16
“Digital beacons, such as iBeacon use Bluetooth low energy [8] proximity sensing to send an unique identifier.”
MethodRespiratory monitoring system using Bluetooth Low Energy
Janik, P., Pielka, M., Janik, M. A., & Wróbel, Z. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.12.040 · Cited by 16
Design and development of a smart attendance management system with Bluetooth low energy beacons
Zorić, B., Dudjak, M., Bajer, D., & Martinović, G. (2019) · Zooming Innovation in Consumer Technologies Conference (ZINC) · doi:10.1109/zinc.2019.8769433 · Cited by 17
“This low-power wireless technology was developed primarily for short-range control and monitoring applications [15].”
BackgroundBlack networks for Bluetooth Low Energy
Chakrabarty, S., & Engels, D. W. (2016) · International Conference on Consumer Electronics · doi:10.1109/icce.2016.7430504 · Cited by 15
“both the Host and the Controller [4].”
Enhanced Channel Access for Connection State of Bluetooth Low Energy Networks
Jeon, W. S., & Jeong, D. G. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2675915 · Cited by 17
“In [22], the performance of BLE was evaluated for various use cases and configurations, in terms of throughput, energy consumption, latency, and maximum piconet size.”
6LoWPAN Overview and Implementations
Yang, Z., & Chang, C. H. (2019) · International Conference on Embedded Wireless Systems and Networks · doi:10.5555/3324320.3324409 · Cited by 15
Mehrabi, A., Mazzoni, A., Jones, D., & Steed, A. J. (2019) · Personal and Ubiquitous Computing · doi:10.1007/s00779-019-01345-7 · Cited by 16
Ta, V. C., Dao, T., Vaufreydaz, D., & Castelli, E. (2020) · Sensors · doi:10.3390/s20020405 · Cited by 15
“More recent works employ the new Bluetooth Low Energy (BLE) technology [27].”
MethodBloothAir: A Secure Aerial Relay System Using Bluetooth Connected Autonomous Drones
Li, K., Lü, N., Zheng, J., Zhang, P., Ni, W., & Tovar, E. (2021) · ACM Transactions on Cyber-Physical Systems · doi:10.1145/3448254 · Cited by 19
“In this article, Bluetooth Low Energy (BLE) [10] is considered for data communications in aerial relay systems due to the following preferable features.”
BackgroundMultimodal Sensing Capabilities for the Detection of Shunt Failure
Gamero, M., Kim, W. S., Hong, S., Vorobiev, D., Morgan, C. D., & Park, S. I. (2021) · Sensors · doi:10.3390/s21051747 · Cited by 16
“Given these possibilities, the Bluetooth chip we are applying offers a high level of security clearance and facilitates reliable read/write access on portable devices, which is advantageous for extending the mentioned functionality [45,46].”
BackgroundSmart Tracking and Monitoring in Supply Chain Systems using RFID and BLE
Kumar, S. G., Prince, S., & Shankar, B. M. (2021) · doi:10.1109/icspc51351.2021.9451700 · Cited by 15
“BLE commences as a strong low-power wireless device for single-hop communication which may provide to connecting an intensely large amount of novel devices to the Internet of Things [3].”
BackgroundPower Management for Energy Harvesting in IoT – A Brief Review of Requirements and Innovations
Kawar, S., Krishnan, S., & Abugharbieh, K. (2021) · IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) · doi:10.1109/mwscas47672.2021.9531846 · Cited by 15
“The transmitter power is specified as -20dBm to +10dBm [29].”
Wielandt, S., Uhlemann, S., Fiolleau, S., & Dafflon, B. (2023) · Journal of Signal Processing Systems · doi:10.1007/s11265-023-01834-2 · Cited by 23
“Bluetooth low energy (BLE) is selected for local connectivity to a computer or smartphone for data offloading and sensor configuration.”
BackgroundInfluentialAutomatic control of cycling effort using electric bicycles and mobile devices
Afonso, J. A., Rodrigues, F. J., Pedrosa, D., & Afonso, J. L. (2015) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 19
Flexibility-Aware System-on-Polymer (SoP): Concept to Prototype
Gupta, U., Park, J., Joshi, H., & Ogras, U. Y. (2016) · IEEE Transactions on Multi-Scale Computing Systems · doi:10.1109/tmscs.2016.2637345 · Cited by 15
Bluetooth Low Energy based Communication Framework for Intra Vehicle Wireless Sensor Networks
Mirza, N., & Khan, A. N. (2017) · International Conference on Frontiers of Information Technology (FIT) · doi:10.1109/fit.2017.00013 · Cited by 15
STC: an intelligent trash can system based on both NB-IoT and edge computing for smart cities
Jia, G., Zhu, Y., Han, G., Chan, S., & Shu, L. (2019) · Enterprise Information Systems · doi:10.1080/17517575.2019.1669833 · Cited by 17
BLE Sniffing for Crowd Sensing and Directionality Scanning of Mobile Devices Inside Tunnels
Asiminidis, C., Kokkonis, G., & Kontogiannis, S. I. (2020) · World Symposium on Communication Engineering (WSCE) · doi:10.1109/wsce51339.2020.9275574 · Cited by 15
“BLE was firstly introduced in 2009 in version 4.0 according to Bluetooth version 4.0 [4].”
MethodInfluentialWearable Intelligent Human–Machine Interfaces Ready for Sustainable Edge Computing Systems
Zhu, M., He, S., Chen, T., & Lee, C. (2025) · AI Sensors · doi:10.3390/aisens1020009 · Cited by 17
“For instance, a Bluetooth low energy device powered by a coin battery is reported to have a theoretical battery life of 14.1 years [236].”
InfluentialSalaberria, I., Perallos, A., Azpilicueta, L., Falcone, F., Carballedo, R., Angulo, I., Elejoste, P., Bahillo, A., Astráin, J. J., & Villadangos, J. (2014) · Sensors · doi:10.3390/s140508003 · Cited by 14
“It must be pointed out that the data of BLE and classic Bluetooth has been obtained from the literature [36].”
Sneps-Sneppe, M., & Namiot, D. (2016) · International Siberian Conference on Control and Communications · doi:10.1109/sibcon.2016.7491675 · Cited by 14
Applications of Secure Location Sensing in Healthcare
Martin, P. D., Rushanan, M., Tantillo, T., Lehmann, C. U., & Rubin, A. D. (2016) · ACM International Conference on Bioinformatics, Computational Biology, and Health Informatics (ACM-BCB) · doi:10.1145/2975167.2975173 · Cited by 14
Wearable sensing and haptic feedback research platform for gait retraining
Xu, J., Lee, U. H., Bao, T., Huang, Y., Sienko, K. H., & Shull, P. B. (2017) · Wearable and Implantable Body Sensor Networks · doi:10.1109/bsn.2017.7936023 · Cited by 14
“Bluetooth Low Energy networking [21] for lower energy consumption.”
BackgroundSmartphone-Based User Positioning in a Multiple-User Context with Wi-Fi and Bluetooth
Ta, V. C., Dao, T., Vaufreydaz, D., & Castelli, E. (2018) · International Conference on Indoor Positioning and Indoor Navigation · doi:10.1109/ipin.2018.8533809 · Cited by 16
IoT Networking and Communication Layer
Mohamed, K. S. (2019) · Springer eBooks · doi:10.1007/978-3-030-18133-8_3 · Cited by 15
Khazraee, M., Guddeti, Y. R., Crow, S., Snoeren, A. C., Levchenko, K., Bharadia, D., & Schulman, A. (2019) · International Conference on Mobile Systems, Applications, and Services · doi:10.1145/3307334.3326088 · Cited by 14
“Specifically, we show that it is possible to simultaneously receive 450 Bluetooth Low Energy (BLE) transmissions per second across the full 2.4-GHz band using a Raspberry Pi 3+ connected to a SparSDR-enabled USRP N210 operating at its full 100-MHz bandwidth.”
BackgroundInfluentialOptimizing the Bluetooth Low Energy Service Discovery Process
T’Jonck, K., Pang, B., Hallez, H., & Boydens, J. (2021) · Sensors · doi:10.3390/s21113812 · Cited by 19
“Gomez et al. [6] presented an overview of the BLE specification [6].”
BackgroundSurvey on inertial sensor-based ILS for smartphone users
Panja, A. K., Chowdhury, C., & Neogy, S. (2022) · CCF Transactions on Pervasive Computing and Interaction · doi:10.1007/s42486-022-00098-2 · Cited by 18
“The common technologies used in positioning include Bluetooth Low Energy (BLE), WiFi, UWB, Lo Ra, and so on, on which techniques such as RSS based fingerprinting, TDoA based approaches are carried out for localization.”
MethodDISASTER: Dedicated Intelligent Security Attacks on Sensor-Triggered Emergency Responses
Mosenia, A., Sur‐Kolay, S., Raghunathan, A., & Jha, N. K. (2017) · IEEE Transactions on Multi-Scale Computing Systems · doi:10.1109/tmscs.2017.2720660 · Cited by 14
“Bluetooth [19] and ZigBee [20] are instances of standardized communication protocols that offer lightweight encryption mechanisms (e.”
BackgroundAngel-Echo: A Personalized Health Care Application
Ma, M., Skubic, M., Ai, K., & Hubbard, J. (2017) · IEEE/ACM Conference on Connected Health: Applications, Systems and Engineering Technologies · doi:10.1109/chase.2017.91 · Cited by 14
Neonatal EEG Interpretation and Decision Support Framework for Mobile Platforms
O’Sullivan, M., Gomez, S., O'Shea, A., Salgado, E., Huillca, K., Mathieson, S., Boylan, G. B., Popovici, E. M., & Temko, A. (2018) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2018.8513231 · Cited by 14
The Study of Smart Elderly Care System
Lu, Y.-H., & Lin, C. (2018) · International Conference on Information Science and Technology · doi:10.1109/icist.2018.8426110 · Cited by 14
Social Distancing using Bluetooth Low Energy to Prevent the Spread of COVID-19
Kumar, S., Gautam, V., Kumar, A., & Kumari, P. (2021) · International Conference on Cloud Computing, Data Science & Engineering (Confluence) · doi:10.1109/confluence51648.2021.9377096 · Cited by 14
IOT based Indoor Air Pollution Monitoring using Raspberry PI
(2017) · International Journal of Innovations in Engineering and Technology · doi:10.21172/ijiet.92.03 · Cited by 14
Rashidi, M. R., & Chinara, S. (2025) · IEEE Internet of Things Journal · doi:10.1109/jiot.2025.3611794 · Cited by 19
“ATT manages to define the attributes, e.g., basic units of data in the BLE database, where each attribute has a type which is identified by a universally unique identifier (UUID), a value, and permissions to define if the attribute can be read or written [43].”
Phase-Based Ranging in Narrowband Systems With Missing/Interfered Tones
Sheikh, A., Romme, J., Govers, J., Farsaei, A., & Bachmann, C. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3264790 · Cited by 13
“Missing tones in Bluetooth system are unavoidable as some channels are reserved for Bluetooth advertising packets [14].”
BackgroundModak, M., Pritom, M. M., Banik, S. C., & Rabbi, M. S. (2025) · IET Wireless Sensor Systems · doi:10.1049/wss2.70013 · Cited by 18
A real-subject evaluation trial for location-aware smart buildings
Inaya, M., Meli, M., Sikeridis, D., & Devetsikiotis, M. (2017) · IEEE Conference on Computer Communications Workshops (INFOCOM WKSHPS) · doi:10.1109/infcomw.2017.8116393 · Cited by 13
“The beacons within the system are configured to broadcast under the same 16-byte universally unique identifier (UUID) [13].”
BackgroundDeployment of LoRA WAN Network for Rural Smart Grid in Brazil
Silva, F. E. S. E., Barriquello, C. H., Canha, L. N., Bernardon, D. P., & Hokama, W. S. (2018) · IEEE PES Transmission & Distribution Conference and Exposition - Latin America (PES T&D-LA) · doi:10.1109/tdc-la.2018.8511646 · Cited by 13
Marques, G., & Pitarma, R. (2019) · Lecture notes in networks and systems · doi:10.1007/978-3-030-23672-4_2 · Cited by 16
Guido: Augmented Reality for Indoor Navigation Using Commodity Hardware
Cankiri, Z. T., Marasli, E. E., Akturk, S., Sonlu, S., & Güdükbay, U. (2020) · International Conference on Information Visualisation (IV) · doi:10.1109/iv51561.2020.00123 · Cited by 13
“Energy consumption of the BLE devices is low, thus it is possible to create a grid network of BLE beacons and use them for positioning with trilateration techniques [5].”
MethodExploring the application of IoT in the service station business
Marques, R., Ferreira, W. D. P., Nassif, G., Armellini, F., Dungen, J., & de Santa-Eulália, L. A. (2021) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2021.08.163 · Cited by 13
Propagation Measurements for IQRF Network in an Urban Environment
Bouzidi, M., Mohamed, M., Dalveren, Y., Moldsvor, A., Cheikh, F. A., & Derawi, M. O. (2022) · Sensors · doi:10.3390/s22187012 · Cited by 13
“In order to satisfy these requirements, several communication technologies such as 6LoWPAN [2], Wi-Fi [3,4], BLE [5], and ZigBee [6,7] have already been developed.”
MethodUsing Bluetooth Low Energy for Dynamic Information-Sharing in Vehicle-to-Vehicle Communication
Yang, J., Poellabauer, C., & Mitra, P. (2017) · SAE International journal of passenger cars. Electronic and electrical systems · doi:10.4271/2017-01-1650 · Cited by 13
Pustišek, M., Dolenc, D., & Kos, A. (2019) · Sensors · doi:10.3390/s19102337 · Cited by 16
Medication Adherence and Liquid Level Tracking System for Healthcare Provider Feedback
Payne, N., Gangwani, R., Barton, K. L., Sample, A. P., Cain, S. M., Burke, D., Newman-Casey, P. A., & Shorter, K. A. (2020) · Sensors · doi:10.3390/s20082435 · Cited by 13
“Unlike Bluetooth, BLE uses two types of RF channels, advertising and data transmission, to poll for a connection and send data at set intervals [27].”
MethodA Privacy-Preserving Solution for Proximity Tracing Avoiding Identifier Exchanging
Buccafurri, F., Angelis, V. D., & Labrini, C. (2020) · International Conference on Cyberworlds (CW) · doi:10.1109/cw49994.2020.00045 · Cited by 17
“Bluetooth Low Energy (BLE) [3] on board of smartphones is the technology used to implement decentralized protocols, in which users in BLE action range exchange pseudonym identities and store them together with some information useful to evaluate the risk of the occurred contacts in terms of possible contagious.”
BackgroundAn analytical model of the effective delay performance for Bluetooth low energy
Rondón, R., Landernäs, K., & Gidlund, M. (2016) · IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) · doi:10.1109/pimrc.2016.7794553 · Cited by 13
“This tendency is congruent with the results obtained by Gomez [16], and is also consistent with the transition probabilities (7), (17) and (22), since a Connection Event ends prematurely more frequently with a greater PBit, and thus it is more likely that several Connection Events are required for a single successful…”
ResultB-hop: Time-Domain Adjustment of BLE Frequency Hopping Against Wi-Fi Beacon Interference
Park, W., Eo, S., Joo, C., & Bahk, S. (2023) · IEEE Internet of Things Journal · doi:10.1109/jiot.2023.3337252 · Cited by 12
“Certainly, BLE’s frequency-hopping spread spectrum (FHSS) channel access [4] and adaptive frequency hopping (AFH) [5], [6] help avoid the use of poor-quality channels.”
BackgroundNoguera-Arnaldos, J. Á., Paredes‐Valverde, M. A., Salas‐Zárate, M. D. P., Rodríguez‐García, M. Á., Valencia‐García, R., & Ochoa, J. L. (2017) · Intelligent systems reference library · doi:10.1007/978-3-319-51905-0_1 · Cited by 12
“For instance, in[19] the authors presented a BLEbased (Bluetooth Low Energy)[20] appliance control system.”
BackgroundImproving Delivery Probability in Mobile Opportunistic Networks with Social-Based Routing
Jesús-Azabal, M., García-Alonso, J. M., Soares, V. N. G. J., & Galán–Jiménez, J. (2022) · Electronics · doi:10.3390/electronics11132084 · Cited by 12
Automated concrete curing and assessment of strength and durability using IoT system
Taffese, W. Z., & Nigussie, E. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.07.107 · Cited by 12
Mobile sensing system for georeferenced performance monitoring in cycling
Oliveira, D. S., & Afonso, J. A. (2015) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 12
A Field Test Study on a Dynamic Shelf Life Service for Perishables
Jevinger, Å., Göransson, M., & Båth, K. (2014) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 12
Security Analysis of an IoT Architecture for Healthcare
Villalba, M. T., Rodríguez, M. D. B., Páez, D. G., & Aparicio, F. (2016) · Lecture notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering · doi:10.1007/978-3-319-47063-4_48 · Cited by 15
Interference-Robust Transmission in Wireless Sensor Networks
Han, J., & Lee, Y. (2016) · Sensors · doi:10.3390/s16111910 · Cited by 12
“Bluetooth low energy (BLE) employs an adaptive frequency hopping (AFH) mechanism [14].”
BackgroundFundamentals of Wireless Communication Link Design for Networked Robotics
Barriquello, C. H., Silva, F. E. S. E., Bernardon, D. P., Canha, L. N., Ramos, M. J. D. S., & Porto, D. S. (2018) · InTech eBooks · doi:10.5772/intechopen.69873 · Cited by 12
Multi-sensing of fragile persons for risk situation detection: devices, methods, challenges
Yebda, T., Benois‐Pineau, J., Amieva, H., & Frolicher, B. (2019) · International Workshop on Content-Based Multimedia Indexing (CBMI) · doi:10.1109/cbmi.2019.8877476 · Cited by 13
“In this section, we model the time stamping errors of multisensor data as well as the desynchronisation of the sensors between them inspired by [25].”
BackgroundMethodA low-cost IoT-based health monitoring platform enriched with social networking facilities
Korres, S. P., Menychtas, A., Tsanakas, P. D., & Maglogiannis, I. G. (2018) · IEEE International Conference on Pervasive Computing and Communications Workshops (PerCom Workshops) · doi:10.1109/percomw.2018.8480186 · Cited by 15
“The prototype implementation is based on a Raspberry Pi 3 [13], a credit card sized computer that supports BLE communication and is capable to host the various modules of the platform besides its low-cost.”
MethodInfluentialStandards for Cyber-Physical Energy Systems—Two Case Studies from Sensor Technology
Krutwig, M. C., Köelmel, B., Tantau, A. D., & Starosta, K. (2019) · Applied Sciences · doi:10.3390/app9030435 · Cited by 13
IoT Devices Recognition through Object Detection and Classification Techniques
Mavrogiorgou, A., Kiourtis, A., & Kyriazis, D. (2019) · World Conference on Smart Trends in Systems, Security and Sustainability (WorldS4) · doi:10.1109/worlds4.2019.8903926 · Cited by 13
“This interface is based upon the Bluetooth Low-Energy (BLE) [44], which is a core protocol for IoT applications [45].”
MethodHealth Monitoring Systems: An Enabling Technology for Patient Care
Balsamo, D., & Das, S. (2019) · CRC Press eBooks · doi:10.1201/9780429113390 · Cited by 13
WSN-Based Multi-Sensor System for Structural Health Monitoring
Dagsever, F., Khodaei, Z. S., & Aliabadi, M. H. (2025) · Sensors · doi:10.3390/s25144407 · Cited by 19
“In addition, antenna characteristics and orientation play a critical role in determining the achievable range [40,41].”
Gupta, N. K., Kasula, V., Sanmugananthan, P., Panico, N., Dubin, A. H., Sykes, D. A. W., & D’Amico, R. S. (2023) · World Neurosurgery X · doi:10.1016/j.wnsx.2023.100247 · Cited by 11
“14,31,32 Wei Chen et al reported 82 % and 90 % accuracy using a combined Apple watch (Apple, Cupertino, California, USA) IMU device to measure Activities of Daily Living (ADL) function in stroke patients based on ten and seven ADL tasks, respectively.”
MethodLightweight Mobile Web Service Provisioning for Sensor Mediation
Liyanage, M., Chang, C., & Srirama, S. N. (2015) · IEEE International Conference on Mobile Services · doi:10.1109/mobserv.2015.18 · Cited by 11
“With the data rate of 1 Mb/s, BTLE uses Gaussian Frequency Shift Keying (GFSK) as the modulation scheme [37], [38].”
MethodA Holistic Approach to ZigBee Performance Enhancement for Home Automation Networks
Betzler, A., Gómez, C., Demirkol, I., & Paradells, J. (2014) · Sensors · doi:10.3390/s140814932 · Cited by 11
“Table 1 [23] shows a comparison of the key features, such as Bitrates or message (msg.”
BackgroundSelf-citationSmart 3D pointing device based on MEMS sensor and bluetooth low energy
Židek, K., & Piteľ, J. (2013) · IEEE Symposium on Computational Intelligence in Control and Automation (CICA) · doi:10.1109/cica.2013.6611686 · Cited by 11
“The minimum latency for a master to obtain a sensor reading is 676 μs, although simulation results show that under high bit error rate, average latency increases by up to three orders of magnitude according [2], [3].”
BackgroundAn optimized OPC UA transport profile to bringing Bluetooth Low Energy Device into IP networks
Shrestha, G. M., Imtiaz, J., & Jasperneite, J. (2013) · IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) · doi:10.1109/etfa.2013.6648115 · Cited by 11
“A typical scenario exhibiting the use of BLE devices in the IOT is shown in Figure 1 [2].”
BackgroundAccelerated Connection Establishment (ACE) mechanism for Bluetooth Low Energy
Mikhaylov, K. (2014) · IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) · doi:10.1109/pimrc.2014.7136362 · Cited by 11
Vehicle Identification by OCR, RFID and Bluetooth for Toll Roads
Wiseman, Y. (2018) · International Journal of Control and Automation · doi:10.14257/ijca.2018.11.9.07 · Cited by 11
“1% [16], whereas OCR has the highest error bit rate of 3.”
BackgroundCumulative Message Authentication Codes for Resource-Constrained Networks
Li, H., Kumar, V., Park, J.-M. J., & Yang, Y. (2020) · IEEE Conference on Communications and Network Security · doi:10.1109/cns48642.2020.9162217 · Cited by 11
Gutowski, T., & Chmielewski, M. (2021) · IEEE Access · doi:10.1109/access.2021.3056629 · Cited by 14
Digital Door-Lock using Authentication Code Based on ANN Encryption
Hanafiah, N., Kariman, C. P., Fandino, N., Halim, E., Jingga, F., & Atmadja, W. (2021) · Procedia Computer Science · doi:10.1016/j.procs.2021.01.079 · Cited by 11
Cullinan, M. F., Scott, R., Linogao, J., Bradwell, H. L., Cooper, L., & McGinn, C. (2023) · Sensors · doi:10.3390/s23052493 · Cited by 12
“1 years of operation for simple devices [28].”
BackgroundBasal body temperature measurement using e-textile
Caya, M. V. C., Cruz, F. R. G., Linsangan, N. B., Catipon, M. A. M. D., Monje, P. I. T., Tan, H. K. R., & Chung, W. (2017) · IEEE International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management (HNICEM) · doi:10.1109/hnicem.2017.8269444 · Cited by 11
“With the use of Bluetooth technology [8], data from the Arduino sent to the computer to display the temperature gathered.”
MethodBLE Tree Networks for Sensor Devices in Internet of Things
Wang, S., & Chiang, K.-J. (2017) · IEEE Intl Conf on Dependable, Autonomic and Secure Computing, Intl Conf on Pervasive Intelligence and Computing, Intl Conf on Cloud and Big Data Computing, Intl Conf on Cyber Science and Technology Congress (DASC/PiCom/CBDCom/CyberSciTech) · doi:10.1109/dasc-picom-datacom-cyberscitec.2017.210 · Cited by 11
“The drop of packet delivery rate at 10 p/s may be caused by reason that the sending cycle, 100 ms, reaches the one-way delivery latency with high BER [4].”
BackgroundRethinking ranging of unmodified BLE peripherals in smart city infrastructure
Islam, B., Uddin, M., Mukherjee, S., & Nirjon, S. (2018) · ACM Multimedia Systems Conference (MMSys) · doi:10.1145/3204949.3204950 · Cited by 11
“Bluetooth Low Energy (BLE) is a wireless technology which is especially designed for low power devices that operate in the 2.4GHz ISM band [25].”
Background
Metadata
- Authors
- Gomez, C., Oller, J., & Paradells, J.
- Affiliations
- Universitat Politècnica de Catalunya/Fundació i2Cat, C/Esteve Terradas, 7, Castelldefels 08860, Spain
- i2CAT (ES)
- Venue
- Sensors
- Publisher
- MDPI AG
- Published
- 2012-08-29
- Volume
- 12
- Issue
- 9
- Pages
- 11734-11753
- ISSN
- 1424-8220 (ISSN-L)
- PMC
- PMC3478807
- OpenAlex
- W1971130353
- Cited by
- 967
- References
- 17
- Citations by year
- 2026: 34 · 2025: 51 · 2024: 48 · 2023: 42 · 2022: 47 · 2021: 68 · 2020: 100 · 2019: 105 · 2018: 128 · 2017: 120 · 2016: 108 · 2015: 68 · 2014: 34 · 2013: 13
- FWCI
- 48.24
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sensors (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
- Physical Sciences › Engineering › Biomedical Engineering › Wireless Body Area Networks
- Physical Sciences › Computer Science › Computer Networks and Communications › Energy Efficient Wireless Sensor Networks
- Keywords
- Bluetooth Low Energy, low-power wireless communication, energy consumption, throughput, battery life, coin cell batteries, bit error rate, sensor networks
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.