Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 1,181

The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.

Infrared Thermography for Temperature Measurement and Non-Destructive Testing

Open access
Usamentiaga, Rubén, Venegas, Pablo, Guerediaga, Jon, Vega, Laura, Molleda, Julio, Bulnes, Francisco · 2014 · Sensors

Abstract

The intensity of the infrared radiation emitted by objects is mainly a function of their temperature. In infrared thermography, this feature is used for multiple purposes: as a health indicator in medical applications, as a sign of malfunction in mechanical and electrical maintenance or as an indicator of heat loss in buildings. This paper presents a review of infrared thermography especially focused on two applications: temperature measurement and non-destructive testing, two of the main fields where infrared thermography-based sensors are used. A general introduction to infrared thermography and the common procedures for temperature measurement and non-destructive testing are presented. Furthermore, developments in these fields and recent advances are reviewed.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/s140712305

Cites

64 of 64 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 65

  1. Gaussorgues, G. (1994). Infrared Thermography, Springer. · doi:10.1007/978-94-011-0711-2
  2. Bogue, 2013, Sensors for condition monitoring: A review of technologies and applications, Sens. Rev., 33, 295, 10.1108/SR-05-2013-675 · doi:10.1108/sr-05-2013-675
  3. Tarpani, 2013, Nondestructive testing with thermography, Eur. J. Phys., 34, S91, 10.1088/0143-0807/34/6/S91 · doi:10.1088/0143-0807/34/6/s91
  4. Amalu, W.C. A Review of Breast Thermography. Available online: http://www.iact-org.org/downloads/a-review-of-bc.pdf.
  5. Fikackova, 2004, Can infrared thermography be a diagnostic tool for arthralgia of the temporomandibular joint?, Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endodontology, 98, 643, 10.1016/j.tripleo.2004.02.080 · doi:10.1016/j.tripleo.2004.02.080
  6. Manginas, 2010, Right ventricular endocardial thermography in transplanted and coronary artery disease patients: First human application, J. Invasive Cardiol., 22, 400
  7. Chou, Y.C., and Yao, L. (2009, January 4–7). Automatic diagnostic system of electrical equipment using infrared thermography. Malacca, Malaysia. · doi:10.1109/socpar.2009.41
  8. Luong, 1998, Fatigue limit evaluation of metals using an infrared thermographic technique, Mech. Mater., 28, 155, 10.1016/S0167-6636(97)00047-1 · doi:10.1016/s0167-6636(97)00047-1
  9. Risitano, 2000, Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components, Int. J. Fatigue, 22, 65, 10.1016/S0142-1123(99)00088-2 · doi:10.1016/s0142-1123(99)00088-2
  10. Grinzato, 1998, Quantitative infrared thermography in buildings, Energy Build., 29, 1, 10.1016/S0378-7788(97)00039-X · doi:10.1016/s0378-7788(97)00039-x
  11. Badulescu, 2011, Applying the grid method and infrared thermography to investigate plastic deformation in aluminium multicrystal, Mech. Mater., 43, 36, 10.1016/j.mechmat.2010.11.001 · doi:10.1016/j.mechmat.2010.11.001
  12. Pastor, 2008, Applying infrared thermography to study the heating of 2024-T3 aluminium specimens under fatigue loading, Infrared Phys. Technol., 51, 505, 10.1016/j.infrared.2008.01.001 · doi:10.1016/j.infrared.2008.01.001
  13. Meola, 2004, The use of infrared thermography for nondestructive evaluation of joints, Infrared Phys. Technol., 46, 93, 10.1016/j.infrared.2004.03.013 · doi:10.1016/j.infrared.2004.03.013
  14. Ljungberg, 1994, Infrared techniques in buildings and structures: Operation and maintenance, Infrared Methodol. Technol., 7, 211
  15. Kiiskinen, 1997, Infrared thermography examination of paper structure, Tappi J., 80, 159
  16. Sugiura, 2007, Correction of low-altitude thermal images applied to estimating soil water status, Biosyst. Eng., 96, 301, 10.1016/j.biosystemseng.2006.11.006 · doi:10.1016/j.biosystemseng.2006.11.006
  17. Vavilov, 2004, Detecting water in aviation honeycomb structures: The quantitative approach, Quant. InfraRed Thermogr. J., 1, 173, 10.3166/qirt.1.173-184 · doi:10.3166/qirt.1.173-184
  18. Wiecek, B. (2005, January 1–4). Review on thermal image processing for passive and active thermography. Shanghai, China. · doi:10.1109/iembs.2005.1616506
  19. Chen, C.H. (2007). Active Infrared Thermography Techniques for the Non-Destructive Testing of Materials, World Scientific.
  20. Usamentiaga, 2008, Real-time adaptive method for noise filtering of a stream of thermographic line scans based on spatial overlapping and edge detection, J. Electron. Imaging, 17, 033012, 10.1117/1.2952844 · doi:10.1117/1.2952844
  21. Meola, C. (2012). Infrared Thermography: Recent Advances and Future Trends, Bentham Science. · DOI
  22. Duxbury, 1992, Fundamentals of Infrared Detector Operation and Testing, J. Mod. Opt., 39, 190, 10.1080/713823349 · doi:10.1080/713823349
  23. Usamentiaga, 2005, Algorithms for real-time acquisition and segmentation of a stream of thermographic line scans in industrial environments, J. Imaging Sci. Technol., 49, 138, 10.2352/J.ImagingSci.Technol.2005.49.2.art00005 · doi:10.2352/j.imagingsci.technol.2005.49.2.art00005
  24. Michalski, L., Eckersdorf, K., Kucharski, J., and McGhee, J. (2001). Temperature Measurement, Wiley. · doi:10.1002/0470846135
  25. Ivanov, 2013, Temperature and emissivity determination of small-size long-range object's using staring thermovision cameras, Infrared Phys. Technol., 60, 161, 10.1016/j.infrared.2013.04.009 · doi:10.1016/j.infrared.2013.04.009
  26. Honner, 2013, Non-contact charge temperature measurement on industrial continuous furnaces and steel charge emissivity analysis, Infrared Phys. Technol., 61, 20, 10.1016/j.infrared.2013.07.005 · doi:10.1016/j.infrared.2013.07.005
  27. Hunter, 1985, Multiwavelength pyrometry: An improved method, Opt. Eng., 24, 241081, 10.1117/12.7973633 · doi:10.1117/12.7973633
  28. Herve, 2012, Infrared technique for simultaneous determination of temperature and emissivity, Infrared Phys. Technol., 55, 1, 10.1016/j.infrared.2010.09.001 · doi:10.1016/j.infrared.2010.09.001
  29. Madura, 2007, Automatic compensation of emissivity in three-wavelength pyrometers, Infrared Phys. Technol., 51, 1, 10.1016/j.infrared.2006.11.001 · doi:10.1016/j.infrared.2006.11.001
  30. Pujana, 2007, Radiation thermometry applied to temperature measurement in the cutting process, Meas. Sci. Technol., 18, 3409, 10.1088/0957-0233/18/11/022 · doi:10.1088/0957-0233/18/11/022
  31. Holst, G.C. (2000). Common Sense Approach to Thermal Imaging, SPIE Optical Engineering Press. · doi:10.1117/3.2588945
  32. Usamentiaga, 2010, Real-time line scan extraction from infrared images using the wedge method in industrial environments, J. Electron. Imaging., 19, 043017, 10.1117/1.3514741 · doi:10.1117/1.3514741
  33. Usamentiaga, 2011, Temperature measurement using the wedge method: Comparison and application to emissivity estimation and compensation, IEEE Trans. Instrum. Meas., 60, 1768, 10.1109/TIM.2010.2089894 · doi:10.1109/tim.2010.2089894
  34. Burnay, S., and Williams, T. (1988). Applications of Thermal Imaging, Taylor & Francis Group.
  35. Kress-Rogers, E., and Brimelow, C.J. (2001). Instrumentation and Sensors for the Food Industry, Woodhead Publishing. · doi:10.1201/9781439833049
  36. Schindl, 2002, Systemic effects of low-intensity laser irradiation on skin microcirculation in patients with diabetic microangiopathy, Microvasc. Res., 64, 240, 10.1006/mvre.2002.2429 · doi:10.1006/mvre.2002.2429
  37. Usamentiaga, 2012, Temperature measurement of molten pig iron with slag characterization and detection using infrared computer vision, IEEE Trans. Instrum. Meas., 61, 1149, 10.1109/TIM.2011.2178675 · doi:10.1109/tim.2011.2178675
  38. Usamentiaga, 2008, Uncertainty analysis in spatial thermal measurements using infrared line scanners, IEEE Trans. Instrum. Meas., 57, 2074, 10.1109/TIM.2008.919008 · doi:10.1109/tim.2008.919008
  39. Armesto, 2011, Calibration and verification of thermographic cameras for geometric measurements, Infrared Phys. Technol., 54, 92, 10.1016/j.infrared.2011.01.002 · doi:10.1016/j.infrared.2011.01.002
  40. Luhmann, T., Piechel, J., and Roelfs, T. (2013). Thermal Infrared Remote Sensing, Springer.
  41. Usamentiaga, 2012, Non-destructive inspection of drilled holes in reinforced honeycomb sandwich panels using active thermography, Infrared Phys. Technol., 55, 491, 10.1016/j.infrared.2012.08.002 · doi:10.1016/j.infrared.2012.08.002
  42. Vollheim, 2013, Review of thermal imaging systems in composite defect detection, Infrared Phys. Technol., 61, 167, 10.1016/j.infrared.2013.07.009 · doi:10.1016/j.infrared.2013.07.009
  43. Wu, D., Steegmüller, R., Karpen, W., and Busse, G. (1995). Review of Progress in Quantitative Nondestructive Evaluation, Springer.
  44. Shepard, S.M. (2003, January 21). Advances in thermographic NDT. Orlando, FL, USA. · doi:10.1117/12.498157
  45. Halabe, U., Steele Iii, W., GangaRao, H., and Klinkhachorn, P. (2003, January 14–19). NDE of FRP Wrapped Timber Bridge Components Using Infrared Thermography. Bellingham, WA, USA. · doi:10.1063/1.1570265
  46. Busse, 1992, Thermal wave imaging with phase sensitive modulated thermography, J. Appl. Phys., 71, 3962, 10.1063/1.351366 · doi:10.1063/1.351366
  47. Zweschper, 2003, Ultrasound excited thermography using frequency modulated elastic waves, Insight-Non-Destructive Test. Cond. Monit., 45, 178, 10.1784/insi.45.3.178.53162 · doi:10.1784/insi.45.3.178.53162
  48. Gleiter, A., Riegert, G., Zweschper, T., Degenhardt, R., and Busse, G. (2006, January 17). Advanced ultrasound activated lockin-thermography for defect selective depth-resolved imaging. Orlando, FL, USA. · doi:10.1117/12.662743
  49. Cuccurullo, 2002, IR temperature measurements in microwave heating, Infrared Phys. Technol., 43, 145, 10.1016/S1350-4495(02)00133-0 · doi:10.1016/s1350-4495(02)00133-0
  50. Holtmann, 2012, Iterative improvement of Lockin-thermography results by temporal and spatial adaption of optical excitation, Quant. InfraRed Thermogr. J., 9, 167, 10.1080/17686733.2012.741919 · doi:10.1080/17686733.2012.741919
  51. Milne, J., and Reynolds, W. (1985, January 23). The non-destructive evaluation of composites and other materials by thermal pulse video thermography. Cambridge, UK. · doi:10.1117/12.946141
  52. Martin, 2003, Interpreting the results of pulsed thermography data, Mater. Eval., 61, 611
  53. Maldague, X. (2000). Applications of infrared thermography in nondestructive evaluation. Trends Opt. Nondestruc. Test., 591–609. · doi:10.1016/b978-008043020-1/50040-5
  54. Madruga, F., Ibarra-Castanedo, C., Conde, O., López-Higuera, J., and Maldague, X. (2008, January 2–5). Automatic data processing based on the skewness statistic parameter for subsurface defect detection by active infrared thermography. Krakow, Poland. · doi:10.21611/qirt.2008.12_16_16
  55. Madruga, F.J., Ibarra-Castanedo, C., Conde, O.M., Maldague, X.P., and López-Higuera, J.M. (2009, January 13). Enhanced contrast detection of subsurface defects by pulsed infrared thermography based on the fourth order statistic moment, kurtosis. Orlando, FL, USA. · doi:10.1117/12.818684
  56. Cramer, K.E., and Winfree, W.P. (2005, January 2–4). The Application of Principal Component Analysis Using Fixed Eigenvectors to the Infrared Thermographic Inspection of the Space Shuttle Thermal Protection System. Neuquen, Argentina. · doi:10.21611/qirt.2006.002
  57. Breitenstein, 2003, Quantitative evaluation of shunts in solar cells by lock-in thermography, Progr. Photovolt. Res. Appl., 11, 515, 10.1002/pip.520 · doi:10.1002/pip.520
  58. Sham, 2008, Surface crack detection by flash thermography on concrete surface, Insight-Non-Destructive Test. Cond. Monit., 50, 240, 10.1784/insi.2008.50.5.240 · doi:10.1784/insi.2008.50.5.240
  59. Plekhov, 2005, Fatigue crack initiation and growth in a 35CrMo4 steel investigated by infrared thermography, Fatigue Fract. Eng. Mater. Struct., 28, 169, 10.1111/j.1460-2695.2005.00856.x · doi:10.1111/j.1460-2695.2005.00856.x
  60. Noethen, M., Wolter, K.J., and Meyendorf, N. (2010, January 12–12). Surface crack detection in ferritic and austenitic steel components using inductive heated thermography. Warsaw, Poland. · doi:10.1109/isse.2010.5547297
  61. Broberg, 2013, Surface crack detection in welds using thermography, NDT E Int., 57, 69, 10.1016/j.ndteint.2013.03.008 · doi:10.1016/j.ndteint.2013.03.008
  62. Saarimäki, E., and Ylinen, P. (2008, January 2–5). An investigation of non-destructive thermographic inspection exploiting phase transition of water for moisture detection in aircraft structures. Krakow, Poland. · doi:10.21611/qirt.2008.12_08_16
  63. Wong, 1999, Thermographic evaluation of defects in composite materials, Insight-Wigston Then Northamp., 41, 504
  64. Ghosh, 2006, A critical review of infrared thermography as a method for non-destructive evaluation of FRP rehabilitated structures, Int. J. Mater. Prod. Technol., 25, 241, 10.1504/IJMPT.2006.008882 · doi:10.1504/ijmpt.2006.008882
  65. Genest, 2009, Pulsed thermography for non-destructive evaluation and damage growth monitoring of bonded repairs, Compos. Struct., 88, 112, 10.1016/j.compstruct.2008.02.010 · doi:10.1016/j.compstruct.2008.02.010

Cited by

See all 1,181

Metadata

Authors
Usamentiaga, R., Venegas, P., Guerediaga, J., Vega, L., Molleda, J., & Bulnes, F.
Venue
Sensors
Publisher
MDPI AG
Published
2014-07-10
Volume
14
Issue
7
Pages
12305-12348
ISSN
1424-8220 (ISSN-L)
OpenAlex
W2068540749
Cited by
1,181
References
64
FWCI
32.40
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.