Life Cycle Assessment (LCA) of Cross-Laminated Timber (CLT) Produced in Western Washington: The Role of Logistics and Wood Species Mix
Open accessThe DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
The use of cross-laminated timber (CLT), as an environmentally sustainable building material, has generated significant interest among the wood products industry, architects and policy makers in Washington State. However, the environmental impacts of CLT panels can vary significantly depending on material logistics and wood species mix. This study developed a regionally specific cradle-to-gate life cycle assessment of CLT produced in western Washington. Specifically, this study focused on transportation logistics, mill location, and relevant wood species mixes to provide a comparative analysis for CLT produced in the region. For this study, five sawmills (potential lamstock suppliers) in western Washington were selected along with two hypothetical CLT mills. The results show that the location of lumber suppliers, in reference to the CLT manufacturing facilities, and the wood species mix are important factors in determining the total environmental impacts of the CLT production. Additionally, changing wood species used for lumber from a heavier species such as Douglas-fir (Pseudotsuga menziesii) to a lighter species such as Sitka spruce (Picea sitchensis) could generate significant reduction in the global warming potential (GWP) of CLT. Given the size and location of the CLT manufacturing facilities, the mills can achieve up to 14% reduction in the overall GWP of the CLT panels by sourcing the lumber locally and using lighter wood species.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“CLT can be manufactured using out-ofgrade/small-diameter mixed species logs that are removed during thinning but have little to no other commercial value [23].”
From Life-cycle carbon footprint and total production potential of cross-laminated timber from California’s wildland-urban interface (2025) · cites this paper as [23]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Most life cycle assessment (LCA) studies of innovative wood use, such as CLT (33–35) and biochar (36–40), have focused on process- or product-level understandings, and they used traditional, static methods without considering spatial and temporal factors (e.g., forest growth, climate and soil conditions).”
From Climate-smart forestry through innovative wood products and commercial afforestation and reforestation on marginal land (2023) · cites this paper as [34]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
2006 IPCC Guidelines for National Greenhouse Gas Inventories
Paustian, K. H., Ravindranath, N. H., & van Amstel, A. R. (2006) · Socio-Environmental Systems Modeling · Cited by 6,706
The wood from the trees: The use of timber in construction
Ramage, M. H., Burridge, H., Busse-Wicher, M., Fereday, G., Reynolds, T., Shah, D. U., Wu, G., Yu, L., Fleming, P., Densley-Tingley, D., et al. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.107 · Cited by 1,402 · cited 1×
“The supply chain for wood products is composed of a network of forest activities, harvest, processing, and distribution [5], and each stage within the supply chain can contribute to the total environmental impact.”
BackgroundSpecific gravity and other properties of wood and bark for 156 tree species found in North America
Miles, P. D., & Smith, W. B. (2009) · doi:10.2737/nrs-rn-38 · Cited by 298
Experimental analysis of cross-laminated timber panels in fire
Frangi, A., Fontana, M., Hugi, E., & Jübstl, R. (2009) · Fire Safety Journal · doi:10.1016/j.firesaf.2009.07.007 · Cited by 199
The Carbon Impacts of Wood Products
Bergman, R. D., Puettmann, M., Taylor, A., & Skog, K. E. (2014) · Forest Products Journal · doi:10.13073/fpj-d-14-00047 · Cited by 164
Liu, Y., Guo, H., Sun, C., & Chang, W.-S. (2016) · Sustainability · doi:10.3390/su8101047 · Cited by 128 · cited 1×
“[16] evaluates the carbon emission of CLT buildings in China and assumes the total transportation distance between facilities to be constant, but the variability associated with transportation is not considered.”
BackgroundGuo, H., Liu, Y., Meng, Y., Huang, H., Sun, C., & Shao, Y. (2017) · Sustainability · doi:10.3390/su9081426 · Cited by 112
Environmental Impact and Added Value in Forestry Operations in Norway
Michelsen, O., Solli, C., & Strømman, A. H. (2008) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2008.00008.x · Cited by 93
Takano, A., Pal, S. K., Kuittinen, M., Alanne, K., Hughes, M., & Winter, S. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.03.001 · Cited by 86
Research works printed but not linked: 2
- Messmer, A. (2015). Life Cycle Assessment (LCA) of Adhesives Used in Wood Constructions. [Master’s Thesis, Institute of Ecological System Design-ETH Zürich].
- Solomon, S. (2007). Climate Change 2007—The Physical Science Basis: Working Group I Contribution to the Fourth Assessment Report of the IPCC, Cambridge University Press.
Cited by
Emerging Engineered Wood for Building Applications
Ding, Y., Pang, Z., Lan, K., Yao, Y., Panzarasa, G., Xu, L., Lo Ricco, M., Rammer, D. R., Zhu, J. Y., Hu, M., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00450 · Cited by 326
Barbhuiya, S., & Das, B. B. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02326 · Cited by 219
Fnais, A., Rezgui, Y., Petri, I., Beach, T., Yeung, J., Ghoroghi, A., & Kubicki, S. (2022) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-022-02058-5 · Cited by 204
Life cycle assessment of mass timber construction: A review
Duan, Z., Huang, Q., & Zhang, Q. (2022) · Building and Environment · doi:10.1016/j.buildenv.2022.109320 · Cited by 186
D’Amico, B., Pomponi, F., & Hart, J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123487 · Cited by 141
Comparative life-cycle assessment of a mass timber building and concrete alternative
Liang, S., Gu, H., Bergman, R. D., & Kelley, S. S. (2020) · Wood and Fiber Science · doi:10.22382/wfs-2020-019 · Cited by 115
“This was mainly because of the wood products manufacturer using mill residue as an alternative heating source to dry the lumber before CLT and glulam production (Bowers et al 2017; Chen et al 2019).”
BackgroundMethodKarlsson, I., Rootzén, J., Johnsson, F., & Erlandsson, M. (2021) · Developments in the Built Environment · doi:10.1016/j.dibe.2021.100059 · Cited by 130
Life Cycle Assessment of Forest-Based Products: A Review
Sahoo, K., Bergman, R., Alanya-Rosenbaum, S., Gu, H., & Liang, S. (2019) · Sustainability · doi:10.3390/su11174722 · Cited by 102
“Wood species used and transportation had a notable effect on overall global warming (GW), where up to 14% reduction in GW can be achieved by reducing the transportation distances [96].”
BackgroundTimber Construction as a Solution to Climate Change: A Systematic Literature Review
Tūpėnaitė, L., Kanapeckienė, L., Naimavičienė, J., Kaklauskas, A., & Gečys, T. (2023) · Buildings · doi:10.3390/buildings13040976 · Cited by 129
Lan, K., Kelley, S. S., Nepal, P., & Yao, Y. (2020) · Environmental Research Letters · doi:10.1088/1748-9326/abc5e6 · Cited by 95
Effects on Global Forests and Wood Product Markets of Increased Demand for Mass Timber
Nepal, P., Johnston, C. M. T., & Ganguly, I. (2021) · Sustainability · doi:10.3390/su132413943 · Cited by 106
“A growing body of literature suggests that mass timber has a considerably lower carbon footprint than non-wood materials such as steel or concrete [13–15].”
BackgroundMethodInfluentialSelf-citationBalasbaneh, A. T., & Sher, W. (2021) · Building and Environment · doi:10.1016/j.buildenv.2021.108112 · Cited by 89
Liang, S., Gu, H., & Bergman, R. D. (2021) · Sustainability · doi:10.3390/su13147831 · Cited by 102
“The environmental and economic consequences of these end-of-life decisions can be signifcant at the building level and could represent up to 50% of the building total life cycle impacts [60].”
InfluentialChen, C. X., Pierobon, F., Jones, S., Maples, I., Gong, Y., & Ganguly, I. (2021) · Sustainability · doi:10.3390/su14010144 · Cited by 78
“CLT production process described in [5] was applied in this study.”
BackgroundMethodSelf-citationLife cycle assessment of mycelium-based composite materials
Volk, R., Schröter, M., Saeidi, N., Steffl, S., Javadian, A., Hebel, D. E., & Schultmann, F. (2024) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2024.107579 · Cited by 90
“The use of naturally propagating mycelium instead of fossil-based resins as a binder could be a major driver for this performance (Chen et al., 2019; Sands et al., 2001).”
BackgroundSustainable Cross-Laminated Timber Structures in a Seismic Area: Overview and Future Trends
Sandoli, A., D’Ambra, C., Ceraldi, C., Calderoni, B., & Prota, A. (2021) · Applied Sciences · doi:10.3390/app11052078 · Cited by 73
“By contrast with other mass timber structures, boards used for CLT panels can be obtained from small-diameter trees: such trees have low commercial value and can be beneficial in maintaining a healthier forests habitat, because less vulnerable to wildfires [6].”
BackgroundPuettmann, M., Pierobon, F., Ganguly, I., Gu, H., Chen, C. S., Liang, S., Jones, S., Maples, I., & Wishnie, M. H. (2021) · Sustainability · doi:10.3390/su132413987 · Cited by 71
“Increased benefts are also manifested when the timing of emissions is considered [12,27].”
BackgroundSelf-citationFelmer, G., Morales-Vera, R., Astroza, R., González, I., Puettmann, M., & Wishnie, M. H. (2022) · Sustainability · doi:10.3390/su14031249 · Cited by 58
“…and radiate pine forestry operations in Chile Exterior finish—stucco Thermal plaster, outdoor (GLO)| market for | Cut-off, U EcoInvent 3.5 CLT CLT (Chen et al., 2019 [60]; Huang et al., 2019 [61]); modified for Chilean energy, wood density, and radiate pine forestry operations in Chile Concrete…”
BackgroundInfluentialPramreiter, M., Nenning, T., Huber, C., Müller, U., Kromoser, B., Mayencourt, P., & Konnerth, J. (2023) · Sustainable materials and technologies · doi:10.1016/j.susmat.2023.e00728 · Cited by 54
Fauzi, R. T., Lavoie, P., Tanguy, A., & Amor, B. (2021) · Building and Environment · doi:10.1016/j.buildenv.2021.107836 · Cited by 54
Environmental impacts of cross-laminated timber production in Japan
Nakano, K., Koike, W., Yamagishi, K., & Hattori, N. (2020) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-020-01948-2 · Cited by 49
Greene, J. M., Hosanna, H. R., Willson, B., & Quinn, J. C. (2022) · Sustainable materials and technologies · doi:10.1016/j.susmat.2022.e00528 · Cited by 65
Balasbaneh, A. T., & Sher, W. (2022) · Environment Development and Sustainability · doi:10.1007/s10668-022-02707-7 · Cited by 56
“Chen et al. (2019) evaluated the cradle-to-gate of LCA for CLT.”
Piccardo, C., & Gustavsson, L. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111145 · Cited by 50
Nakano, K., Karube, M., & Hattori, N. (2020) · Sustainability · doi:10.3390/su12062220 · Cited by 40
“In a similar manner, the impacts evaluated for low-rise CLT buildings in Slovenia [5], including the impact of carbon storage, totalled 0.027–0.163 t-CO2e/m2.”
InfluentialLife cycle analysis of cross-insulated timber panels
Santos, P., Correia, J. R., GODINHO, L. M. C., Dias, A. M. P. G., & Dias, A. M. A. (2020) · Structures · doi:10.1016/j.istruc.2020.12.008 · Cited by 38
Zhang, B., Lan, K., Harris, T. B., Ashton, M. S., & Yao, Y. (2023) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2221840120 · Cited by 36
“0 Lumber target moisture content (12, 13, 15, 34, 37, 100, 101, 106, 108) % (dry basis) 12.”
BackgroundInfluentialShin, B., Wi, S., & Kim, S. (2023) · Energy and Buildings · doi:10.1016/j.enbuild.2023.113228 · Cited by 36
Life Cycle Assessment of Cross-Laminated Timber Transportation from Three Origin Points
Hemmati, M., Messadi, T., & Gu, H. (2021) · Sustainability · doi:10.3390/su14010336 · Cited by 36
“In a recent article, Chen et al. [14] examined the impact two parameters: Travel In a recent article, Chen et al. [14] examined the impact of two parameters: Travel distance from mills to the site and wood species. distance from mills to the site and wood species.”
InfluentialNepal, P., Prestemon, J. P., Ganguly, I., Kumar, V., Bergman, R. D., & Poudyal, N. C. (2024) · PLoS ONE · doi:10.1371/journal.pone.0298379 · Cited by 33
“While several studies assume the same operational energy between mass timber and functionally equivalent alternative buildings [25, 63, 64], others suggest that energy consumption is lower in mass timber buildings, due to their better thermal properties [65], an important research topic that needs…”
BackgroundSelf-citationBalasbaneh, A. T., & Sher, W. (2024) · Environment Development and Sustainability · doi:10.1007/s10668-024-05377-9 · Cited by 36
“However, some studies used a combination of another databases, such as the U.S. Life Cycle Inventory (USLCI) along with Ecoinvent (C. X. Chen et al., 2019; Hemmati et al., 2022; Pierobon et al., 2019), or a combination of primary data (CORRIM) and public databases (Puettmann et al., 2021).”
InfluentialGlobal land and carbon consequences of mass timber products
Lan, K., Favero, A., Yao, Y., Mendelsohn, R. O., & Wang, S.-H. (2025) · Nature Communications · doi:10.1038/s41467-025-60245-y · Cited by 32
Ren, H., Bahrami, A., Cehlin, M., & Wallhagen, M. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.118552 · Cited by 30
Assessing the anthropogenic carbon emission of wooden construction: an LCA study
Lin, C., Chiang, W.-H., Weng, Y.-S., & Hui-ping, W. (2022) · Building Research & Information · doi:10.1080/09613218.2022.2087171 · Cited by 28
“While the adoption of sustainable forestry timber is fundamental to sustainable development in the building sector, Chen et al. (2019) and Li et al. (2018) further stressed the significance of accounting carbon emission throughout the supply chain of timber products.”
BackgroundCarbon Impacts of Engineered Wood Products in Construction
Gu, H., Nepal, P., Arvanitis, M. A., & Alderman, D. R. (2021) · IntechOpen eBooks · doi:10.5772/intechopen.99193 · Cited by 23
Mass Timber Building Life Cycle Assessment Methodology for the U.S. Regional Case Studies
Gu, H., Liang, S., Pierobon, F., Puettmann, M., Ganguly, I., Chen, C. S., Pasternack, R., Wishnie, M. H., Jones, S., & Maples, I. (2021) · Sustainability · doi:10.3390/su132414034 · Cited by 23
“Mass timber products, such as CLT, glued-laminated timber (glulam), and dowel-laminated timber (DLT), are becoming the preferred products of architects, builders, and engineers because of their inherent low carbon footprint, long-term carbon storage, and renewable nature.”
BackgroundInfluentialSelf-citationA structural performance-based environmental impact assessment framework for natural hazard loads
Salgado, R. A., & Güner, S. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102908 · Cited by 21
Mass-customisation of cross-laminated timber wall systems at early design stages
Yazdi, A. J., Fini, A. A. F., & Forsythe, P. J. (2021) · Automation in Construction · doi:10.1016/j.autcon.2021.103938 · Cited by 21
Opportunities and challenges for engineering construction materials as carbon sinks
Miller, S. A., Roijen, E. C. V., Cunningham, P. R., & Kim, A. (2021) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2021.146 · Cited by 25
“The introduction of engineered woods such as glue-laminated beams (glulam) and cross-laminated timber (CLT), which are composed of multiple layers of smaller boards or lamella glued together [28], has expanded the structural applications of woods.”
BackgroundQian, Y., Gunawardena, T., Mendis, P. A., & Aye, L. (2025) · Sustainability · doi:10.3390/su17114804 · Cited by 21
Life Cycle Assessment of Reprocessed Cross Laminated Timber in Latvia
Vamža, I., Diaz, F., Resnais, P., Radziņa, A., & Blumberga, D. (2021) · Environmental and Climate Technologies · doi:10.2478/rtuect-2021-0005 · Cited by 24
Lao, W.-L., Hu, J., Huang, Y., & Li, X. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.121320 · Cited by 15
Shen, Z., Hamelin, L., & Tiruta-Barna, L. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.136040 · Cited by 16
Carbon intensity of mass timber materials: impacts of sourcing and transportation
Atnoorkar, S., Ghatpande, O. A., Haile, S. L., Goetsch, H., & Harris, C. (2024) · Frontiers in Built Environment · doi:10.3389/fbuil.2023.1321340 · Cited by 15
Zhang, B., Lan, K., Yang, F., Xu, Y., Piotto, D., Ashton, M. S., & Yao, Y. (2025) · One Earth · doi:10.1016/j.oneear.2025.101306 · Cited by 15
Dynamic accounting of carbon uptake in the built environment
Van Roijen, E., Kane, S., Fan, J., Olsson, J. A., Bose, B., Hendrickson, T. P., Nordahl, S. L., Kendall, A., Scown, C. D., & Miller, S. A. (2025) · Environmental Science & Technology · doi:10.1021/acs.est.5c00080 · Cited by 14
The Research Review on Life Cycle Carbon Emissions in the Operational Process of Modular Buildings
Hu, Y., Xiang, L., & Shang, K. (2025) · Buildings · doi:10.3390/buildings15122085 · Cited by 14
The environmental and social impacts of modified wood production: effect of timber sourcing
Roberts, G. L., Skinner, C., & Ormondroyd, G. A. (2022) · International Wood Products Journal · doi:10.1080/20426445.2022.2117923 · Cited by 15
“…et al. 2021; Candelier and Dibdiakova 2020; Ferreira et al. 2018) and few studies have explicitly assessed the effect of timber provenance on the overall environmental performance of wood products (e.g. González-García et al. 2009; Mirabella et al. 2014; Valente et al. 2014; Chen et al. 2019).”
BackgroundIwase, T., Sasaki, T., Araki, S., Huzita, T., & Kayo, C. (2020) · Sustainability · doi:10.3390/su12083424 · Cited by 13
Environmental Impact of a Mass Timber Building—A Case Study
Vaňová, R., Štompf, P., Štefko, J., & Štefková, J. (2021) · Forests · doi:10.3390/f12111571 · Cited by 13
“LCA environmental evaluation of CLT as a material itself is reported in several published studies [7,14,17,18], while logistics and wood species mix have an essential impact on the final assessment [19].”
BackgroundSaxena, A., Buettner, W. C., Kestler, L., & Kim, Y. (2022) · Trees Forests and People · doi:10.1016/j.tfp.2022.100244 · Cited by 13
Zhang, Z., & Lan, K. (2022) · Journal of Renewable Materials · doi:10.32604/jrm.2022.017506 · Cited by 12
Moisture safety strategy for construction of CLT structures in a coastal Nordic climate
Time, B., Andenæs, E., Karlsen, T., Geving, S., & Kvande, T. (2023) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2654/1/012041 · Cited by 12
“Wood is a material with little embodied carbon and manufactured using relatively little energy, which makes it suitable for low-emission buildings [1].”
BackgroundFlexural Performance of Novel Nail-Cross-Laminated Timber Composite Panels
Zhang, Y., Nehdi, M. L., Gao, X., & Zhang, L. V. (2020) · Applied Sciences · doi:10.3390/app10175983 · Cited by 13
“Yet, CLT panels have shortcomings including: (i) most glues are susceptible to environmental exposures, which compromises service life [13]; (ii) large amounts of glue are used, causing environmental pollution [14].”
BackgroundJóźwik, R., & Jóźwik, A. (2021) · Sustainability · doi:10.3390/su14010086 · Cited by 11
Life cycle assessment of emerging mass timber product: Cross-laminated bamboo
Wang, Y., & Lan, K. (2024) · Cleaner Environmental Systems · doi:10.1016/j.cesys.2024.100243 · Cited by 12
Junda, E., & Málaga‐Chuquitaype, C. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112282 · Cited by 17
Gao, X., Liu, Y., Qi, Y., Gong, R., Yao, F., Luo, J., Zhao, Y., Dai, Y., Wang, J., Lian, C., et al. (2022) · Polymers · doi:10.3390/polym14235277 · Cited by 10
Economic Ripple Effects Analysis of Cross-Laminated Timber Manufacturing in Japan
Liu, M., Huzita, T., Murano, A., Goh, C. S., & Kayo, C. (2023) · Forests · doi:10.3390/f14030492 · Cited by 11
Climate effects of post-use wood materials from the building sector in a system perspective
Truong, N. L. (2023) · Waste Management · doi:10.1016/j.wasman.2023.09.011 · Cited by 11
Barriers to the Use of Cross-Laminated Timber for Mid-Rise Residential Buildings in the UAE
Pilathottathil, S. N., & Rauf, A. (2024) · Sustainability · doi:10.3390/su16166837 · Cited by 9
Life Cycle Assessment of Engineered Wood Products in the Building Sector: A Review
Jin, C., Zhu, S., & Feng, H. (2025) · Buildings · doi:10.3390/buildings15224193 · Cited by 10
“For example, sourcing Douglas-fir from the closer Interfor sawmill rather than the Hampton sawmill significantly reduces GWP impacts in CLT production, with GWP values of 161.65 CO 2 eq and 184.81 CO 2 eq, respectively [63].”
InfluentialOptimizing Forest-Biomass-Distribution Logistics from a Multi-Level Perspective—Review
Stanula, Z., Wieruszewski, M., Zydroń, A., & Adamowicz, K. (2023) · Energies · doi:10.3390/en16247997 · Cited by 11
“The development of LCA algorithms under development and advances in computational software [75,76] make it possible to consider an increasing number of decision variables and provide optimal solutions for the defined business-optimization objective function [122–125].”
MethodHossain, M., Therasme, O., Crovella, P. L., & Volk, T. A. (2024) · Energies · doi:10.3390/en17143406 · Cited by 11
Modelling the impact sound reduction of floating floors applied on cross-laminated timber floors
Caniato, M., Bettarello, F., Granzotto, N., Marzi, A., & Gasparella, A. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109679 · Cited by 8
Sporchia, F., Bruno, M., Neri, E., Pulselli, F. M., Patrizi, N., & Bastianoni, S. (2025) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2025.179030 · Cited by 8
Wedajo, D. Y., Cristescu, C., Billore, S., & Αδαμόπουλος, Σ. (2025) · Carbon Management · doi:10.1080/17583004.2025.2536350 · Cited by 13
“For instance, the impact on global warming, when modeled over different time frame such as 20, 100, or 500 years, results in different outcomes, making direct comparisons difficult [181].”
Life cycle assessment of hardwood cross-laminated timber production in the eastern United States
Zhao, J., Wang, J., Dénes, L., Liu, Z., Anderson, N., Bergman, R. D., Lan, K., & Hu, W. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.146669 · Cited by 7
Life cycle assessment of cross laminated timber: a systematic literature review
Sanchotene, C. Y. D. S., Fischer, A. C., Monteiro, T. C., Punhagui, K. R. G., & da Silva, D. A. (2024) · Contribuciones a las Ciencias Sociales · doi:10.55905/revconv.17n.6-080 · Cited by 7
Osborne, P., Aquilué, N., Mina, M., Moe, K., Jemtrud, M., & Messier, C. (2023) · PNAS Nexus · doi:10.1093/pnasnexus/pgad254 · Cited by 8
“…species CLT panels, wood fiber insulation, and other engineered wood products show a promising direction for increasing the full spectrum of possible harvest outputs, making both wood products and buildings more resilient and adaptable to changes in harvest output and species composition (37–39).”
Upcycling of protein concentrates from industrial byproducts into polyurethane wood adhesives
Mary, A., Blanchet, P., Pépin, S., Chamberland, J., & Landry, V. (2024) · BioResources · doi:10.15376/biores.19.1.1165-1189 · Cited by 7
Adhikari, R. K., Poudyal, N. C., Brandeis, C., & Nepal, P. (2023) · Forest Products Journal · doi:10.13073/fpj-d-23-00010 · Cited by 7
Chang, G., Gu, H., Gong, M., & Blackadar, J. (2022) · Recent Progress in Materials · doi:10.21926/rpm.2203014 · Cited by 6
Wang, H., Wu, J., & Chen, Z. (2021) · BioResources · doi:10.15376/biores.16.4.6870-6890 · Cited by 6
“According to a state-of-the-art of sawing process in China, the average carbon emissions of the sawing and drying process were approximately 40 kg CO2-eq per cubic meter (Shen et al. 2016; Chen et al. 2019).”
BackgroundBose, B., Hendrickson, T. P., Nordahl, S. L., Kane, S., Fan, J., Miller, S. A., & Scown, C. D. (2025) · Environmental Research Letters · doi:10.1088/1748-9326/adf868 · Cited by 5
Climate-Conscious Sustainable Practices in the Romanian Building Sector
Boca, M. C., Bungau, C. C., & Hanga-Fărcaș, I. F. (2025) · Buildings · doi:10.3390/buildings15122106 · Cited by 5
Mass Timber as a Tool to Sustainable Construction: a Review
Santos, F. L. D. L., Santos, H. F., Costa, L. L., Lima, V. D. S., Cunha, R. D. A., & César, S. F. (2025) · Revista de Gestão Social e Ambiental · doi:10.24857/rgsa.v19n3-007 · Cited by 6
“A comprehensive database of local tree species and their suitability for MT production is necessary for accurately assessing environmental impact (Chen et al. , 2019; Khanal et al. , 2024).”
Liu, M., Murano, A., Goh, C. S., & Kayo, C. (2023) · Forests · doi:10.3390/f14112263 · Cited by 5
Experimental Investigation on Axial Compression of Resilient Nail-Cross-Laminated Timber Panels
Nehdi, M. L., Zhang, Y., Gao, X., Zhang, L. V., & Suleiman, A. R. (2021) · Sustainability · doi:10.3390/su132011257 · Cited by 5
“While CLT panels have numerous benefits, making them attractive as a building material [16–18], there are still some problems to be solved for CLT panels to gain wider acceptance [19,20], including (1) relatively low service life of the adhesive connection [21]; (2) environmental pollution related to using inferior gl…”
BackgroundThe Cradle-to-Gate Life Cycle Assessment on Hardwood Lumber Production in New Brunswick, Canada
Zahabi, N., Gong, M., Gu, H., & Blackadar, J. (2025) · Buildings · doi:10.3390/buildings15030499 · Cited by 5
Deval, M., & Ruttico, P. (2025) · Sustainability · doi:10.3390/su17136002 · Cited by 3
Ijeoma, M. W., Ou, S., Ijeoma, G. W., Stoner, M., Ross, B. E., Pang, W., Layton, P., Albright, D., Chen, H., Nabati, A., et al. (2025) · Environmental Research Communications · doi:10.1088/2515-7620/ae1810 · Cited by 3
Fuchigami, Y., Watanabe, K., & Nakai, T. (2020) · 木材学会誌 · doi:10.2488/jwrs.66.101 · Cited by 3
Wood-based textiles & modern wood buildings
Orfanidou, T., Hassegawa, M., Leskinen, P., Sixta, H., Oinas, P., & Cardellini, G. (2023) · doi:10.36333/k2a06 · Cited by 4
Birinci, A. U., İlhan, O., Demir, A., & Demirkır, C. (2024) · Düzce Üniversitesi Orman fakültesi ormancılık dergisi/Düzce Üniversitesi Orman Fakültesi ormancılık dergisi · doi:10.58816/duzceod.1443083 · Cited by 2
Engineered Wood Products (EWP)—Resource Efficiency and Environmental Performance
Pramreiter, M., Konnerth, J., & Mayencourt, P. (2025) · Springer series in materials science · doi:10.1007/978-3-031-97818-0_21 · Cited by 2
Prakosa, G. G., Larasatie, P., Winans, K. S., Goben, A., Hindman, D. P., & Bond, B. (2026) · Sustainability · doi:10.3390/su18126291 · Cited by 2
Bio-innovation in wood bonding: Sodium caseinate as a renewable polyol substitute
Mary, A., Blanchet, P., Pépin, S., Chamberland, J., Diouf, P. N., & Landry, V. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.143365 · Cited by 2
A framework for ground-up life cycle assessment of novel, carbon-storing building materials
Kane, S., Bose, B., Hendrickson, T. P., Jin, F., Nordahl, S. L., Scown, C. D., & Miller, S. A. (2025) · Energy & Environmental Science · doi:10.1039/d5ee02728d · Cited by 3
Wood Utilization and Environmental Impacts
Richter, K., Helm, S., Köhl, M., Risse, M., & Weber‐Blaschke, G. (2023) · Springer handbooks · doi:10.1007/978-3-030-81315-4_36 · Cited by 3
CLT Walls: Role of Vapour Barriers and Smart Vapour Retarders for Enhanced Durability
Morelli, M., Jensen, N. F., & Hansen, T. K. (2024) · Lecture notes in civil engineering · doi:10.1007/978-981-97-8305-2_43 · Cited by 1
How many Net-Zero buildings can we build?
Shawa, B. A. (2025) · Energy Conversion and Management · doi:10.1016/j.enconman.2025.120600 · Cited by 1
Life Cycle Impacts of Timber and Reinforced Concrete Floor Slabs: A Comparative Assessment
Ren, H., Wallhagen, M., Bahrami, A., & Cehlin, M. (2025) · Infrastructures · doi:10.3390/infrastructures10120346 · Cited by 1
“The lamellas were assumed to be Scots pine, with a bond-dry density of 466 kg/m 3 [41].”
Life cycle assessment in Indonesia forestry sector: A scoping review
Mulyana, B., & Hemida, M. (2023) · Global Forest Journal · doi:10.32734/gfj.v1i01.13254 · Cited by 2
“LCA in forestry activities also have been applied in Asia [13], Africa [14], Australia [15], America[10], [12], [16], and the European region [17].”
BackgroundHarvested wood products' full lifecycle assessment for sustainable construction: A Systemised review
Eisimsidele, J. I., O’Donoghue, C., & McGetrick, P. J. (2025) · Cleaner Waste Systems · doi:10.1016/j.clwas.2025.100430 · Cited by 1
Mass Timber: A Review of Typologies and Environmental Benefits
Gray, A., & Sadoughi, A. (2022) · Lecture notes in civil engineering · doi:10.1007/978-981-19-1029-6_5 · Cited by 1
Alam, A., Goto, Y., Hagy, S., Tuomasjukka, D., & Hughes, M. (2022) · Journal of Sustainability Research · doi:10.20900/jsr20220014 · Cited by 1
“Manufacturing efficiency at the mill was assumed to be 60% for sawnwood, 70% for LVL and 82.6% for CLT [16,30].”
BackgroundInfluentialPalhares, I. C., Fraga, I. F., dos Santos, H. F., de Freitas, L., de Moraes, M. H. M., Chaves, R. J. S., Lahr, F. A. R., & Christoforo, A. L. (2024) · Caderno Pedagógico · doi:10.54033/cadpedv21n5-166 · Cited by 1
Barriers to Introduce Mass Timber in Construction in Ecuador - Exploratory Study
Zaldumbide, P., Fuentes, E. I., & Guerra, M. A. (2024) · Journal of Building Technology · doi:10.32629/jbt.v6i2.2422 · Cited by 1
Life Cycle Assessment of Wooden Building Material
Nakano, K. (2020) · Journal of Life Cycle Assessment Japan · doi:10.3370/lca.16.72
Metadata
- Authors
- Chen, C. X., Pierobon, F., & Ganguly, I.
- Affiliations
- University of Washington (US)
- Corresponding author
- Ganguly, Indroneil
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2019-02-28
- Volume
- 11
- Issue
- 5
- Pages
- 1278
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2916557200
- Cited by
- 115
- References
- 21
- Citations by year
- 2026: 5 · 2025: 26 · 2024: 15 · 2023: 19 · 2022: 15 · 2021: 23 · 2020: 11 · 2019: 1
- FWCI
- 5.30
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Institute of Food and Agriculture (project no. WNZ-A110355 - Accession No. 1011392, project no. WNZ-04162015-GE - Accession No. 1006435)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Life Sciences › Agricultural and Biological Sciences › Forestry › Wood Residue Utilization and Solid Biofuels
- Keywords
- cross-laminated timber, life cycle assessment, cradle-to-gate, transport logistics, Pseudotsuga menziesii, Sitka spruce, global warming potential, western Washington
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.