Life Cycle Assessment (LCA) of Cross-Laminated Timber (CLT) Produced in Western Washington: The Role of Logistics and Wood Species Mix
Open accessThe DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
The use of cross-laminated timber (CLT), as an environmentally sustainable building material, has generated significant interest among the wood products industry, architects and policy makers in Washington State. However, the environmental impacts of CLT panels can vary significantly depending on material logistics and wood species mix. This study developed a regionally specific cradle-to-gate life cycle assessment of CLT produced in western Washington. Specifically, this study focused on transportation logistics, mill location, and relevant wood species mixes to provide a comparative analysis for CLT produced in the region. For this study, five sawmills (potential lamstock suppliers) in western Washington were selected along with two hypothetical CLT mills. The results show that the location of lumber suppliers, in reference to the CLT manufacturing facilities, and the wood species mix are important factors in determining the total environmental impacts of the CLT production. Additionally, changing wood species used for lumber from a heavier species such as Douglas-fir (Pseudotsuga menziesii) to a lighter species such as Sitka spruce (Picea sitchensis) could generate significant reduction in the global warming potential (GWP) of CLT. Given the size and location of the CLT manufacturing facilities, the mills can achieve up to 14% reduction in the overall GWP of the CLT panels by sourcing the lumber locally and using lighter wood species.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“CLT can be manufactured using out-ofgrade/small-diameter mixed species logs that are removed during thinning but have little to no other commercial value [23].”
From Life-cycle carbon footprint and total production potential of cross-laminated timber from California’s wildland-urban interface (2025) · cites this paper as [23]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Most life cycle assessment (LCA) studies of innovative wood use, such as CLT (33–35) and biochar (36–40), have focused on process- or product-level understandings, and they used traditional, static methods without considering spatial and temporal factors (e.g., forest growth, climate and soil conditions).”
From Climate-smart forestry through innovative wood products and commercial afforestation and reforestation on marginal land (2023) · cites this paper as [34]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
2006 IPCC Guidelines for National Greenhouse Gas Inventories
Paustian, K. H., Ravindranath, N. H., & van Amstel, A. R. (2006) · Socio-Environmental Systems Modeling · Cited by 6,706
The wood from the trees: The use of timber in construction
Ramage, M. H., Burridge, H., Busse-Wicher, M., Fereday, G., Reynolds, T., Shah, D. U., Wu, G., Yu, L., Fleming, P., Densley-Tingley, D., et al. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.107 · Cited by 1,402 · cited 1×
“The supply chain for wood products is composed of a network of forest activities, harvest, processing, and distribution [5], and each stage within the supply chain can contribute to the total environmental impact.”
BackgroundSpecific gravity and other properties of wood and bark for 156 tree species found in North America
Miles, P. D., & Smith, W. B. (2009) · doi:10.2737/nrs-rn-38 · Cited by 298
Experimental analysis of cross-laminated timber panels in fire
Frangi, A., Fontana, M., Hugi, E., & Jübstl, R. (2009) · Fire Safety Journal · doi:10.1016/j.firesaf.2009.07.007 · Cited by 199
The Carbon Impacts of Wood Products
Bergman, R. D., Puettmann, M., Taylor, A., & Skog, K. E. (2014) · Forest Products Journal · doi:10.13073/fpj-d-14-00047 · Cited by 164
Liu, Y., Guo, H., Sun, C., & Chang, W.-S. (2016) · Sustainability · doi:10.3390/su8101047 · Cited by 128 · cited 1×
“[16] evaluates the carbon emission of CLT buildings in China and assumes the total transportation distance between facilities to be constant, but the variability associated with transportation is not considered.”
BackgroundGuo, H., Liu, Y., Meng, Y., Huang, H., Sun, C., & Shao, Y. (2017) · Sustainability · doi:10.3390/su9081426 · Cited by 112
Environmental Impact and Added Value in Forestry Operations in Norway
Michelsen, O., Solli, C., & Strømman, A. H. (2008) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2008.00008.x · Cited by 93
Takano, A., Pal, S. K., Kuittinen, M., Alanne, K., Hughes, M., & Winter, S. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.03.001 · Cited by 86
Sustainable Construction for Urban Infill Development Using Engineered Massive Wood Panel Systems
Lehmann, S. (2012) · Sustainability · doi:10.3390/su4102707 · Cited by 86
Outlook for Cross-Laminated Timber in the United States
Laguarda Mallo, M. F., & Espinoza, O. A. (2014) · BioResources · doi:10.15376/biores.9.4.7427-7443 · Cited by 79
Economic Optimization of Forest Biomass Processing and Transport in the Pacific Northwest USA
Zamora‐Cristales, R., Sessions, J., Boston, K., & Murphy, G. E. (2014) · Forest Science · doi:10.5849/forsci.13-158 · Cited by 65
Massive wood material for sustainable building design: the Massiv–Holz–Mauer wall system
Santi, S., Pierobon, F., Corradini, G., Cavalli, R., & Zanetti, M. (2016) · Journal of Wood Science · doi:10.1007/s10086-016-1570-7 · Cited by 56
Self-citationExploring the Uses for Small-Diameter Trees
LeVan-Green, S., & Livingston, J. (2001) · Cited by 54
Design of Cross-Laminated Timber in Fire
Klippel, M., & Schmid, J. (2017) · Structural Engineering International · doi:10.2749/101686617x14881932436096 · Cited by 51
Domke, G. M., Becker, D. R., D’Amato, A. W., Ek, A. R., & Woodall, C. W. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.10.035 · Cited by 49
Product environmental footprint of a cross-laminated timber system: a case study in Italy
Corradini, G., Pierobon, F., & Zanetti, M. (2018) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-018-1541-x · Cited by 43
Self-citationTechno-economic analysis for manufacturing cross-laminated timber
Brandt, K., Wilson, A., Bender, D., Dolan, J. D., & Wolcott, M. P. (2019) · BioResources · doi:10.15376/biores.14.4.7790-7804 · Cited by 38
Fire-exposed cross-laminated timber – modelling and tests
Schmid, J., König, J., & Köhler, J. (2010) · Cited by 36
Modeling the Processing and Transportation Logistics of Forest Residues Using Life Cycle Assessment
Chen, C. X., Pierobon, F., Zamora‐Cristales, R., Ganguly, I., Sessions, J., & Eastin, I. (2017) · Journal of Forestry · doi:10.5849/jof.2016-027 · Cited by 20
Self-citation
Research works printed but not linked: 2
- Messmer, A. (2015). Life Cycle Assessment (LCA) of Adhesives Used in Wood Constructions. [Master’s Thesis, Institute of Ecological System Design-ETH Zürich].
- Solomon, S. (2007). Climate Change 2007—The Physical Science Basis: Working Group I Contribution to the Fourth Assessment Report of the IPCC, Cambridge University Press.
Cited by
Emerging Engineered Wood for Building Applications
Ding, Y., Pang, Z., Lan, K., Yao, Y., Panzarasa, G., Xu, L., Lo Ricco, M., Rammer, D. R., Zhu, J. Y., Hu, M., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00450 · Cited by 326
Barbhuiya, S., & Das, B. B. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02326 · Cited by 219
Fnais, A., Rezgui, Y., Petri, I., Beach, T., Yeung, J., Ghoroghi, A., & Kubicki, S. (2022) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-022-02058-5 · Cited by 204
Life cycle assessment of mass timber construction: A review
Duan, Z., Huang, Q., & Zhang, Q. (2022) · Building and Environment · doi:10.1016/j.buildenv.2022.109320 · Cited by 186
D’Amico, B., Pomponi, F., & Hart, J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123487 · Cited by 141
Metadata
- Authors
- Chen, C. X., Pierobon, F., & Ganguly, I.
- Affiliations
- University of Washington (US)
- Corresponding author
- Ganguly, Indroneil
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2019-02-28
- Volume
- 11
- Issue
- 5
- Pages
- 1278
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W2916557200
- Cited by
- 115
- References
- 21
- Citations by year
- 2026: 5 · 2025: 26 · 2024: 15 · 2023: 19 · 2022: 15 · 2021: 23 · 2020: 11 · 2019: 1
- FWCI
- 5.30
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Institute of Food and Agriculture (project no. WNZ-A110355 - Accession No. 1011392, project no. WNZ-04162015-GE - Accession No. 1006435)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Life Sciences › Agricultural and Biological Sciences › Forestry › Wood Residue Utilization and Solid Biofuels
- Keywords
- cross-laminated timber, life cycle assessment, cradle-to-gate, transport logistics, Pseudotsuga menziesii, Sitka spruce, global warming potential, western Washington
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.