Sustainability Assessment in Manufacturing under a Strong Sustainability Perspective—An Ecological Neutrality Initiative
Open accessThe DOI matches its Crossref record; 121 of the 124 references it cites were found in a registry or an index.
Abstract
The concept of strong sustainability establishes ecosystem conservation as the basis for socioeconomic development. Despite the increase in the number of studies on this subject, the qualitative approach used in studies on strong sustainability makes the introduction of this theme difficult in the industrial context. The absence of a model of sustainability evaluation in manufacturing based on the concept of strong sustainability was the gap identified by this research. The objective of this study was to develop a model that embeds strong sustainability within the sustainability assessment of manufacturing companies. The research used survey methodology to obtain the opinion of experts on the relevance of sustainability metrics. Information collected from experts was used to calculate the weights of indicators and of the participation of each dimension in strong sustainability. The results indicated that strong sustainability consists of 48% of environmental, 29% of social, and 23% of economic factors. The model has been applied in a study of multiple cases in factories in the automotive sector, two in Brazil and two in Italy. The results revealed that the four companies were rated regular in the strong sustainability scale. However, the sustainability performances of the companies showed different patterns over five years. Furthermore, analysis of the individual performance of the dimensions showed that the economic growth of the two Brazilian factories was superior to the socio-environmental development. The result of the Italian units emphasized different priorities. A firm reached the best result in environmental performance and the other one on the social dimension.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Partnerships from cannibals with forks: The triple bottom line of 21st‐century business
Elkington, J. (1998) · Environmental Quality Management · doi:10.1002/tqem.3310080106 · Cited by 5,341
Case research in operations management
Voss, C., Tsikriktsis, N., & Frohlich, M. (2002) · International Journal of Operations & Production Management · doi:10.1108/01443570210414329 · Cited by 2,963 · cited 2×
“The case study method has been consistently used in operations management research [116].”
BackgroundMethodModels, Methods, Concepts & Applications of the Analytic Hierarchy Process
Saaty, T. L., & Vargas, L. G. (2012) · International Series in Operations Research & Management Science · doi:10.1007/978-1-4614-3597-6 · Cited by 2,210 · cited 1×
“Source: Adapted from Saaty and Vargas [128].”
Hahn, R., & Kühnen, M. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.07.005 · Cited by 1,775 · cited 1×
“Regarding the dissemination of results, the Global Reporting Initiative (GRI) standard is the most adopted by companies to report sustainability performance [7].”
BackgroundSurvey research in operations management: a process‐based perspective
Forza, C. (2002) · International Journal of Operations & Production Management · doi:10.1108/01443570210414310 · Cited by 1,610
Barratt, M., Choi, T. Y., & Li, M. (2011) · Journal of Operations Management · doi:10.1016/j.jom.2010.06.002 · Cited by 1,288 · cited 1×
“Convenience sampling is usually selected when the case companies are located close to the researchers [121].”
BackgroundMachining induced surface integrity in titanium and nickel alloys: A review
Ulutan, D., & Ozel, T. (2011) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2010.11.003 · Cited by 1,252 · cited 1×
“In the theoretical sphere, Ulutan and Ozel [103] identified the main problems induced by machining of titanium alloys and nickel-based alloys through a literature review.”
BackgroundEkins, P., Simon, S., Deutsch, L., Folke, C., & De Groot, R. (2003) · Ecological Economics · doi:10.1016/s0921-8009(02)00272-0 · Cited by 905 · cited 1×
“In this context, studies developed frameworks for socio-environmental labelling in products and processes [50], actions to promote strong sustainability in business operations [19], and the application of natural capital as critical to identify priorities and policies for strong sustainability [51].”
BackgroundCinelli, M., Coles, S. R., & Kirwan, K. (2014) · Ecological Indicators · doi:10.1016/j.ecolind.2014.06.011 · Cited by 864 · cited 1×
“[27] identified three multi-criteria decision-making methods, Elimination and Choice Expressing the Reality (ELECTRE), Preference Ranking Organization Method for Enrichment of Evaluations (PROMETHEE) and Dominance-based Rough Set Approach (DRSA), that limit or nullify the compensation between sustainability dimensions.”
MethodMasri, H. A., & Jaaron, A. A. M. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.087 · Cited by 724 · cited 1×
“Additionally, the impacts of Green Human Resources Management practices in industries in India [104] and Palestine [105] were evaluated.”
BackgroundIntegrative management of sustainability performance, measurement and reporting
Schaltegger, S., & Wagner, M. (2006) · International Journal of Accounting, Auditing and Performance Evaluation · doi:10.1504/ijaape.2006.010098 · Cited by 515 · cited 1×
“The assessment process is conducted through the monitoring of indicators [6].”
MethodWeak and strong sustainability in the SEEA: Concepts and measurement
Dietz, S., & Neumayer, E. (2007) · Ecological Economics · doi:10.1016/j.ecolecon.2006.09.007 · Cited by 494 · cited 1×
“Dietz and Neumayer [54] pointed out the best practices in measuring strong and weak sustainability.”
BackgroundStrong sustainable consumption governance – precondition for a degrowth path?
Lorek, S., & Fuchs, D. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.08.008 · Cited by 433 · cited 2×
“Lorek and Fuchs [52] concluded that weak sustainability is not appropriate for sustainable development challenges and proposed strong sustainability-based consumer guidelines to outline deficiencies to be addressed by policy reforms.”
BackgroundA model for integrated assessment of sustainable development
KRAJNC, D., & GLAVIC, P. (2005) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(04)00120-x · Cited by 378 · cited 9×
“Data normalization requires considering two possible conditions of indicator outcomes [38,106,108,109,111].”
BackgroundMethodInfluentialThanki, S., Govindan, K., & Thakkar, J. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.105 · Cited by 367 · cited 1×
“Additionally, other cases have shown sustainability practices in Lean Six Sigma projects [43], the correlation between Triple Bottom Line and Balanced Scorecard [62], the advantages of Lean Cleaner Production [63], and the benefits of Green and Lean in small and medium-sized Indian companies [64].”
BackgroundEcological Economics and Sustainable Development, Selected Essays of Herman Daly
Daly, H. E. (2007) · Edward Elgar Publishing eBooks · doi:10.4337/9781847206947 · Cited by 362 · cited 6×
“On the other hand, the concept of strong sustainability defines that natural capital is fundamental for human well-being and economic growth [17].”
BackgroundResultInfluentialModelling of direct energy requirements in mechanical machining processes
Balogun, V. A., & Mativenga, P. T. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.10.015 · Cited by 324 · cited 1×
“Furthermore, the sustainability approach was present in the analysis of manufacturing processes that evaluated cutting parameters in hard turning stainless steel [98], the life cycle stages from pre-manufacture to post-use [42], the surface integrity characteristics in machining of Inconel 718 [99], the economic, envi…”
MethodSustainability performance evaluation: Literature review and future directions
Büyüközkan, G., & Karabulut, Y. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.03.064 · Cited by 296 · cited 1×
“The concern with the sustainability of industrial operations has been focused on decision-making, which are oriented to meet social demands, environmental preservation, and business profitability [1].”
BackgroundHelleno, A. L., de Moraes, A. J. I., & Simon, A. T. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.072 · Cited by 273 · cited 1×
“Furthermore, sustainability indicators were integrated into Lean Manufacturing to evaluate operational processes [65].”
MethodAn integrated approach for analysing the enablers and barriers of sustainable manufacturing
Bhanot, N., Rao, P. V., & Deshmukh, S. G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.123 · Cited by 245 · cited 4×
“Additionally, other cases have shown sustainability practices in Lean Six Sigma projects [43], the correlation between Triple Bottom Line and Balanced Scorecard [62], the advantages of Lean Cleaner Production [63], and the benefits of Green and Lean in small and medium-sized Indian companies [64].”
BackgroundInfluentialAssessing organizations performance on the basis of GHRM practices using BWM and Fuzzy TOPSIS
Gupta, H. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.08.005 · Cited by 243 · cited 4×
“Moreover, sustainable manufacturing drivers and barriers have been identified in Italy [47,48] and India [68].”
BackgroundInfluentialExploring the role of lean thinking in sustainable business practice: A systematic literature review
Caldera, H. T. S., Desha, C., & Dawes, L. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.126 · Cited by 242
Manufacturing facility location and sustainability: A literature review and research agenda
Chen, L., Olhager, J., & Tang, O. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.05.013 · Cited by 229 · cited 1×
“Through the literature review, theoretical-conceptual studies identified the most widely used sustainable manufacturing indicators [69], the goals that support the development of sustainable products [70] and the aspects taken into account in decision-making of the plant installation site [71].”
BackgroundGiannetti, B. F., Agostinho, F., Almeida, C. M. V. B., & Huisingh, D. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.10.051 · Cited by 228 · cited 1×
“The thresholds of depletion of natural resources are ignored in the analysis of weak sustainability as well as the limits of substitutability between natural and manufactured capital [18].”
BackgroundNormalization in sustainability assessment: Methods and implications
Pollesch, N. L., & Dale, V. H. (2016) · Ecological Economics · doi:10.1016/j.ecolecon.2016.06.018 · Cited by 199 · cited 1×
“The data of sustainability indicators are measured in several units of measure, which makes it difficult to analyze and compare results [126].”
BackgroundStrong sustainability, critical natural capital and the capability approach
Pelenc, J., & Ballet, J. (2015) · Ecological Economics · doi:10.1016/j.ecolecon.2015.02.006 · Cited by 197 · cited 2×
“[55] that demonstrated the importance of social well-being and natural capital in strong sustainability development projects.”
BackgroundOrazalin, N., & Mahmood, M. (2018) · Energy Policy · doi:10.1016/j.enpol.2018.06.015 · Cited by 196 · cited 1×
“A five-year period also was used in the sustainability evaluation model for manufacturing systems [62], in the definition of sustainability indicators of iron and steel production [124] and Russian oil and gas industry [125].”
MethodChang, A.-Y., & Cheng, Y.-T. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.025 · Cited by 191 · cited 12×
“Data normalization requires considering two possible conditions of indicator outcomes [38,106,108,109,111].”
BackgroundMethodInfluentialThe Automobile Industry & Sustainability
Orsato, R. J., & Wells, P. (2007) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.05.035 · Cited by 188 · cited 1×
“It has a long value chain and makes influence other business sectors [119].”
BackgroundEcological-economic viability as a criterion of strong sustainability under uncertainty
Baumgärtner, S., & Quaas, M. F. (2009) · Ecological Economics · doi:10.1016/j.ecolecon.2009.01.016 · Cited by 187 · cited 1×
“Baumgärtner and Quaas [58] applied strong sustainability criteria to manage livestock pasture.”
BackgroundDeveloping a social sustainability assessment framework
Olakitan Atanda, J. (2019) · Sustainable Cities and Society · doi:10.1016/j.scs.2018.09.023 · Cited by 181 · cited 1×
“Examples of this are the sustainability assessment of green buildings [8], sugarcane biofuel to support public policies [9], and sustainable solutions for energy service [10].”
BackgroundGbededo, M. A., Liyanage, K., & Garza-Reyes, J. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.310 · Cited by 179 · cited 1×
“Through the literature review, theoretical-conceptual studies identified the most widely used sustainable manufacturing indicators [69], the goals that support the development of sustainable products [70] and the aspects taken into account in decision-making of the plant installation site [71].”
Backgroundde Guimarães, J. C. F., Severo, E. A., & de Vasconcelos, C. R. M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.074 · Cited by 178 · cited 1×
“Sustainable products and processes increase value to the corporate image, revealing a competitive advantage for companies [2] and increased sales through increased customer satisfaction and loyalty [3].”
BackgroundMarksberry, P. W., & Jawahir, I. S. (2008) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2007.11.006 · Cited by 176 · cited 2×
“In addition, studies with a unique approach at the process level were found to compare dry machining to traditional processes that use cutting fluids [40], to add uncertainties from multiple sources in welding and plastic injection [41], and to propose a sustainability assessment algorithm of machining [42].”
BackgroundMethodScheduling for sustainable manufacturing: A review
Akbar, M., & Irohara, T. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.100 · Cited by 175 · cited 1×
“Through the literature review, theoretical-conceptual studies identified the most widely used sustainable manufacturing indicators [69], the goals that support the development of sustainable products [70] and the aspects taken into account in decision-making of the plant installation site [71].”
BackgroundSustainability in the EU cement industry: the Italian and German experiences
Supino, S., Malandrino, O., Testa, M., & Sica, D. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.022 · Cited by 174 · cited 1×
“In addition, environmental impact mitigation was the purpose to calculate the mass balance in automotive parts sectors [86], natural rubber [33], steel industry [87], cement industry [88], chemical industry [89,90], consumer goods, packaging, food and metalworking [31], particleboards [91], and pulp and paper [92].”
BackgroundEvaluating firm’s sustainable production indicators in uncertainty
Tseng, M.-L., Divinagracia, L., & Divinagracia, R. (2009) · Computers & Industrial Engineering · doi:10.1016/j.cie.2009.07.009 · Cited by 172 · cited 6×
“Data normalization requires considering two possible conditions of indicator outcomes [38,106,108,109,111].”
BackgroundMethodInfluentialRambaud, A., & Richard, J. (2015) · Critical Perspectives on Accounting · doi:10.1016/j.cpa.2015.01.012 · Cited by 169
A general framework for sustainability assessment of manufacturing processes
Saad, M. H., Nazzal, M. A., & Darras, B. M. (2018) · Ecological Indicators · doi:10.1016/j.ecolind.2018.09.062 · Cited by 169 · cited 3×
“Additionally, a framework was developed with guidelines for sustainability assessment [73], an array of technical terms used to describe production processes [74], and the inventory of research on sustainability assessment in manufacturing [75].”
BackgroundMethodA weighted fuzzy approach for product sustainability assessment: a case study in automotive industry
Ghadimi, P., Azadnia, A. H., Yusof, N. M., & Saman, M. Z. M. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.05.010 · Cited by 166 · cited 12×
“[38], operating cost was assumed as the economic indicator.”
BackgroundMethodInfluentialCarbon footprint evaluation at industrial park level: A hybrid life cycle assessment approach
Dong, H., Geng, Y., Xi, F., & Fujita, T. (2013) · Energy Policy · doi:10.1016/j.enpol.2013.01.057 · Cited by 165 · cited 1×
“The Greenhouse Gases (GHG) level was the objective to investigate the cement industry [76,77], the new welding and turning technologies [78], iron and steel industry [79], the supply chain in the consumer goods industry [80], and an eco-industrial park [81].”
BackgroundJaehn, F. (2016) · European Journal of Operational Research · doi:10.1016/j.ejor.2016.02.046 · Cited by 165 · cited 1×
“TBL infers equivalent weight to economic, environmental, and social dimensions as pillars of sustainable development [15], which denotes the substitutability model implicit in weak sustainability [16].”
BackgroundMulti-criteria decision analysis framework for sustainable manufacturing in automotive industry
Stoycheva, S., Marchese, D., Paul, C., Padoan, S., Juhmani, A.-S. F. A., & Linkov, I. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.133 · Cited by 162 · cited 1×
“However, studies on sustainability assessment in the automotive sector have a qualitative approach [11] or have failed to cover the three pillars of sustainability: environmental preservation, economic growth, and social well-being [12].”
BackgroundRajak, S., & Vinodh, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.070 · Cited by 161 · cited 2×
“In contrast, the social factor was the only concern when evaluating sustainability in Indian automotive companies [34], fair wage based on the life cycle assessment [35] and operational initiatives, projects and technologies in industry [36].”
BackgroundTowards sustainability assessment of machining processes
Hegab, H. A., Darras, B., & Kishawy, H. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.197 · Cited by 160 · cited 2×
“In addition, studies with a unique approach at the process level were found to compare dry machining to traditional processes that use cutting fluids [40], to add uncertainties from multiple sources in welding and plastic injection [41], and to propose a sustainability assessment algorithm of machining [42].”
BackgroundMethodEmbedding sustainability in lean six sigma efforts
Erdil, N., Aktas, C. B., & Arani, O. M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.048 · Cited by 157
A framework of actions for strong sustainability
Oliveira Neto, G. C. D., Pinto, L. F. R., Amorim, M. P. C., Giannetti, B. F., & Almeida, C. M. V. B. D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.067 · Cited by 155 · cited 5×
“This statement is supported by the fact that the availability of natural resources is limited, while manufactured products are reproducible and social demands change with each generation [19].”
BackgroundSelf-citationOrji, I. J. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.08.005 · Cited by 151 · cited 3×
“Case studies have identified factors that influence sustainability performance, drivers and barriers in companies in China [49], Indonesia [59], Taiwan [60], and the United Kingdom [61].”
BackgroundBai, C. A., & Sarkis, J. (2017) · International Journal of Production Economics · doi:10.1016/j.ijpe.2017.03.013 · Cited by 148 · cited 1×
“Furthermore, Bai and Sarkis [93] applied a model based on flexibility and environment criteria to evaluate advanced manufacturing technologies in three global manufacturing companies and González-Mejía and Ma [94] used emerging flow dynamics to assess Puerto Rico’s sustainability over the transition period from an agr…”
MethodSivaiah, P., & Chakradhar, D. (2018) · Measurement · doi:10.1016/j.measurement.2018.10.067 · Cited by 145 · cited 1×
“Furthermore, the sustainability approach was present in the analysis of manufacturing processes that evaluated cutting parameters in hard turning stainless steel [98], the life cycle stages from pre-manufacture to post-use [42], the surface integrity characteristics in machining of Inconel 718 [99], the economic, envi…”
MethodJiang, Q., Liu, Z., Liu, W., Li, T., Cong, W., Zhang, H., & Shi, J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.255 · Cited by 142 · cited 9×
“Data normalization requires considering two possible conditions of indicator outcomes [38,106,108,109,111].”
BackgroundMethodInfluentialExergy as a global energy sustainability indicator. A review of the state of the art
Romero, J. C., & Linares, P. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.02.012 · Cited by 140 · cited 1×
“Romero and Linares [28] identified disadvantages and complications in using exergy as an indicator of strong sustainability.”
BackgroundIntegrating sustainable manufacturing assessment into decision making for a production work cell
Zhang, H., & Haapala, K. R. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.01.038 · Cited by 138 · cited 1×
“Furthermore, the sustainability approach was present in the analysis of manufacturing processes that evaluated cutting parameters in hard turning stainless steel [98], the life cycle stages from pre-manufacture to post-use [42], the surface integrity characteristics in machining of Inconel 718 [99], the economic, envi…”
MethodAn exploratory investigation of Additively Manufactured Product life cycle sustainability assessment
Ma, J., Harstvedt, J. D., Dunaway, D., Bian, L., & Jaradat, R. M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.04.249 · Cited by 131 · cited 1×
“However, the approach of some researches was exclusively at the product level, in order to identify the impacts of product sustainability to assist manufacturing decision-making [37,38] and to integrate the life cycle concept into additive manufacturing products [39].”
BackgroundIndustrial sustainability: Modelling drivers and mechanisms with barriers
Neri, A., Cagno, E., Sebastiano, G. D., & Trianni, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.140 · Cited by 131 · cited 5×
“Moreover, sustainable manufacturing drivers and barriers have been identified in Italy [47,48] and India [68].”
BackgroundInfluentialNicoletti Junior, A., de Oliveira, M. C., & Helleno, A. L. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.04.136 · Cited by 124 · cited 2×
“A five-year period also was used in the sustainability evaluation model for manufacturing systems [62], in the definition of sustainability indicators of iron and steel production [124] and Russian oil and gas industry [125].”
BackgroundMethodUsing QFD and ANP to analyze the environmental production requirements in linguistic preferences
Lin, Y.-H., Cheng, H.-P., Tseng, M., & Tsai, J. C. C. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.07.065 · Cited by 122 · cited 2×
“Additionally, quantitative studies applied Quality Function Deployment (QFD) to define priorities for maintenance activities [44] and classify key performance indicators in manufacturing [45].”
BackgroundMethodDynamic multidimensional assessment of sustainability at the macro level: The case of Austria
Shmelev, S., & Rodríguez‐Labajos, B. (2009) · Ecological Economics · doi:10.1016/j.ecolecon.2009.03.019 · Cited by 120 · cited 1×
“Additionally, Shmelev and Rodrígues-Labajos [24] analyzed the performance of fifteen European countries from the perspective of strong sustainability, based on six indicators with targets defined as thresholds by the European Commission.”
BackgroundLiu, H., Li, J., Long, H., Li, Z., & Le, C. (2018) · Energy Policy · doi:10.1016/j.enpol.2018.06.024 · Cited by 119 · cited 1×
“In addition, environmental impact mitigation was the purpose to calculate the mass balance in automotive parts sectors [86], natural rubber [33], steel industry [87], cement industry [88], chemical industry [89,90], consumer goods, packaging, food and metalworking [31], particleboards [91], and pulp and paper [92].”
BackgroundFraming maturity based on sustainable operations management principles
Machado, C. G., de Lima, E. P., da Costa, S. E. G., Angelis, J., & Mattioda, R. A. (2017) · International Journal of Production Economics · doi:10.1016/j.ijpe.2017.01.020 · Cited by 116 · cited 1×
“Surveys revealed sustainable business practices of small and medium companies [66], the evolutionary path of sustainable operations [67] and the parameters in the life cycle analysis of vehicles from the perspectives of processing and consumption [12].”
BackgroundApplications of aggregation theory to sustainability assessment
Pollesch, N., & Dale, V. H. (2015) · Ecological Economics · doi:10.1016/j.ecolecon.2015.03.011 · Cited by 115 · cited 1×
“Pollesch and Dale [26] developed a mathematical model of non-compensatory aggregation function based on strong sustainability.”
BackgroundRamos, A. R., Ferreira, J. C. E., Kumar, V., Garza-Reyes, J. A., & Cherrafi, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.145 · Cited by 114 · cited 1×
“Additionally, other cases have shown sustainability practices in Lean Six Sigma projects [43], the correlation between Triple Bottom Line and Balanced Scorecard [62], the advantages of Lean Cleaner Production [63], and the benefits of Green and Lean in small and medium-sized Indian companies [64].”
BackgroundTheißen, S., & Spinler, S. (2013) · European Journal of Operational Research · doi:10.1016/j.ejor.2013.08.023 · Cited by 111
Pušavec, F., Deshpande, A., Yang, S., M’Saoubi, R., Kopač, J., Dillon, O. W., & Jawahir, I. S. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.10.085 · Cited by 110 · cited 1×
“The multi-criteria approach to sustainability supported decision-making to choose advanced manufacturing technologies [95], the best product design for gear manufacturing [37], the location of a new chemical plant [96], and machining alternatives to conventional processes [97].”
BackgroundMFCA extension from a circular economy perspective: Model modifications and case study
Zhou, Z., Zhao, W., Chen, X., & Zeng, H. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.049 · Cited by 106 · cited 1×
“In addition, environmental impact mitigation was the purpose to calculate the mass balance in automotive parts sectors [86], natural rubber [33], steel industry [87], cement industry [88], chemical industry [89,90], consumer goods, packaging, food and metalworking [31], particleboards [91], and pulp and paper [92].”
BackgroundJokar, Z., & Mokhtar, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.286 · Cited by 106 · cited 1×
“The Greenhouse Gases (GHG) level was the objective to investigate the cement industry [76,77], the new welding and turning technologies [78], iron and steel industry [79], the supply chain in the consumer goods industry [80], and an eco-industrial park [81].”
BackgroundA comprehensive framework for automotive sustainability assessment
Jasiński, D., Meredith, J. O., & Kirwan, K. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.027 · Cited by 105 · cited 2×
“However, studies on sustainability assessment in the automotive sector have a qualitative approach [11] or have failed to cover the three pillars of sustainability: environmental preservation, economic growth, and social well-being [12].”
BackgroundModelling barriers to the adoption of industrial sustainability measures
Trianni, A., Cagno, E., & Neri, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.244 · Cited by 102 · cited 5×
“Moreover, sustainable manufacturing drivers and barriers have been identified in Italy [47,48] and India [68].”
BackgroundInfluentialCaldera, H. T. S., Desha, C., & Dawes, L. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.265 · Cited by 101 · cited 1×
“Surveys revealed sustainable business practices of small and medium companies [66], the evolutionary path of sustainable operations [67] and the parameters in the life cycle analysis of vehicles from the perspectives of processing and consumption [12].”
BackgroundA methodology for the life cycle and sustainability analysis of manufacturing processes
Culaba, A. B., & Purvis, M. R. I. (1999) · Journal of Cleaner Production · doi:10.1016/s0959-6526(99)00231-0 · Cited by 98 · cited 1×
“In addition, environmental impact mitigation was the purpose to calculate the mass balance in automotive parts sectors [86], natural rubber [33], steel industry [87], cement industry [88], chemical industry [89,90], consumer goods, packaging, food and metalworking [31], particleboards [91], and pulp and paper [92].”
BackgroundAdvancing the integration of corporate sustainability measurement, management and reporting
Maas, K., Schaltegger, S., & Crutzen, N. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.006 · Cited by 96 · cited 1×
“Sustainable business management requires integration of measurement, evaluation, and result dissemination practices in order to improve the transparency and performance [4].”
BackgroundA simulation-based decision support for eco-efficiency improvements in production systems
Sproedt, A., Plehn, J., Schönsleben, P., & Herrmann, C. A. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.12.082 · Cited by 95 · cited 2×
“For example, eco-efficiency was the focus on evaluating improvements in production systems [30,31] in the definition of the investment strategy of Chinese manufacturing industries [32] and in the analysis of rubber processing in Sri Lanka [33].”
BackgroundDefining sustainability indicators of iron and steel production
Strezov, V., Evans, A., & Evans, T. J. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.01.016 · Cited by 95 · cited 1×
“A five-year period also was used in the sustainability evaluation model for manufacturing systems [62], in the definition of sustainability indicators of iron and steel production [124] and Russian oil and gas industry [125].”
MethodLiu, C., Cai, W., Jia, S., Zhang, M., Guo, H., Hu, L., & Jiang, Z. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.09.039 · Cited by 95 · cited 1×
“For example, eco-efficiency was the focus on evaluating improvements in production systems [30,31] in the definition of the investment strategy of Chinese manufacturing industries [32] and in the analysis of rubber processing in Sri Lanka [33].”
BackgroundLabuschagne, C., & Brent, A. C. (2006) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2006.07.028 · Cited by 94 · cited 2×
“In contrast, the social factor was the only concern when evaluating sustainability in Indian automotive companies [34], fair wage based on the life cycle assessment [35] and operational initiatives, projects and technologies in industry [36].”
BackgroundImpact of un-deformed chip thickness on specific energy in mechanical machining processes
Balogun, V. A., & Mativenga, P. T. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.01.036 · Cited by 88 · cited 1×
“In terms of energy management, research has proposed methods to increase energy efficiency in product deliveries [82], in light and heavy industries [32] in manufacturing industry departments [83], in plastic welding and injection processes [41], in the combined use of grid electricity and internal generation [84], an…”
BackgroundJaneiro, L., & Patel, M. K. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.01.029 · Cited by 87 · cited 1×
“Furthermore, regarding the thresholds of the natural system, Janeiro and Patel [25] suggested that decision-making be made based on factors that impact climate change, reduction of biodiversity, nitrogen and phosphorous cycles, degradation of the ozone layer, acidification of oceans, availability of drinking water and…”
BackgroundZhou, B., & Shen, C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.04.251 · Cited by 86 · cited 1×
“In terms of energy management, research has proposed methods to increase energy efficiency in product deliveries [82], in light and heavy industries [32] in manufacturing industry departments [83], in plastic welding and injection processes [41], in the combined use of grid electricity and internal generation [84], an…”
BackgroundThe impact of the Chinese automotive industry: scenarios based on the national environmental goals
Liu, Y., Liu, Y., & Chen, J. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.015 · Cited by 85 · cited 1×
“The automotive industry is one of the largest manufacturing sectors worldwide [118].”
BackgroundModelling manufacturing evolution: thoughts on sustainable industrial development
Baldwin, J. S., Allen, P. M., Winder, B., & Ridgway, K. (2004) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2004.04.009 · Cited by 85 · cited 1×
“Case studies have identified factors that influence sustainability performance, drivers and barriers in companies in China [49], Indonesia [59], Taiwan [60], and the United Kingdom [61].”
BackgroundA fuzzy logic approach for evaluating ecosystem sustainability
Prato, T. (2005) · Ecological Modelling · doi:10.1016/j.ecolmodel.2005.01.035 · Cited by 83 · cited 1×
“Additionally, Prato [29] used fuzzy logic to evaluate ecosystem sustainability from the perspective of strong sustainability.”
MethodNilsen, H. R. (2009) · Ecological Economics · doi:10.1016/j.ecolecon.2009.11.011 · Cited by 81 · cited 1×
“Nilsen [53] emphasized the need for academics, governments, and managers to seek strong sustainability alternatives for global development.”
BackgroundEffects of key enabling technologies for seru production on sustainable performance
Zhang, X., Liu, C., Li, W., Evans, S., & Yin, Y. (2016) · Omega · doi:10.1016/j.omega.2016.01.013 · Cited by 81
Sabaghi, M., Mascle, C., Baptiste, P., & Rostamzadeh, R. (2016) · Expert Systems with Applications · doi:10.1016/j.eswa.2016.02.038 · Cited by 79 · cited 4×
“Surveys revealed sustainable business practices of small and medium companies [66], the evolutionary path of sustainable operations [67] and the parameters in the life cycle analysis of vehicles from the perspectives of processing and consumption [12].”
InfluentialEastwood, M. D., & Haapala, K. R. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.08.105 · Cited by 78 · cited 2×
“However, the approach of some researches was exclusively at the product level, in order to identify the impacts of product sustainability to assist manufacturing decision-making [37,38] and to integrate the life cycle concept into additive manufacturing products [39].”
BackgroundKadam, G. S., & Pawade, R. S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.104 · Cited by 77 · cited 1×
“Furthermore, the sustainability approach was present in the analysis of manufacturing processes that evaluated cutting parameters in hard turning stainless steel [98], the life cycle stages from pre-manufacture to post-use [42], the surface integrity characteristics in machining of Inconel 718 [99], the economic, envi…”
MethodDeveloping a sustainability index for Mauritian manufacturing companies
Beekaroo, D., Callychurn, D. S., & Hurreeram, D. K. (2018) · Ecological Indicators · doi:10.1016/j.ecolind.2018.09.003 · Cited by 76 · cited 8×
“[110], which had the participation of 30 specialists in operations management.”
BackgroundMethodInfluentialLee, J. Y., Kang, H. S., & Noh, S. D. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.029 · Cited by 75 · cited 1×
“Furthermore, the sustainability approach was present in the analysis of manufacturing processes that evaluated cutting parameters in hard turning stainless steel [98], the life cycle stages from pre-manufacture to post-use [42], the surface integrity characteristics in machining of Inconel 718 [99], the economic, envi…”
MethodPerformance evaluation of a manufacturing process under uncertainty using Bayesian networks
Nannapaneni, S., Mahadevan, S., & Rachuri, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.003 · Cited by 75 · cited 2×
“In addition, studies with a unique approach at the process level were found to compare dry machining to traditional processes that use cutting fluids [40], to add uncertainties from multiple sources in welding and plastic injection [41], and to propose a sustainability assessment algorithm of machining [42].”
BackgroundSustainable platform identification for product family design
Kim, S., & Moon, S. K. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.073 · Cited by 75 · cited 1×
“Sustainable products and processes increase value to the corporate image, revealing a competitive advantage for companies [2] and increased sales through increased customer satisfaction and loyalty [3].”
BackgroundShang, C., Wu, T., Huang, G., & Wu, J. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.10.032 · Cited by 74 · cited 1×
“[22] investigated progress for three decades in Mongolia and concluded that weak sustainability is not sustainable, suggesting to adopt a strong sustainability approach.”
BackgroundDunuwila, P., Rodrigo, V. H. L., & Goto, N. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.01.029 · Cited by 73 · cited 2×
“For example, eco-efficiency was the focus on evaluating improvements in production systems [30,31] in the definition of the investment strategy of Chinese manufacturing industries [32] and in the analysis of rubber processing in Sri Lanka [33].”
BackgroundEcosystems, strong sustainability and the classical circular economy
Martins, N. (2016) · Ecological Economics · doi:10.1016/j.ecolecon.2016.06.003 · Cited by 71 · cited 3×
“Martins [20] identified restrictions for strong sustainability due to the predominance of the neoclassical economy.”
BackgroundInfluentialZhao, R., Su, H., Chen, X., & Yu, Y. (2016) · Sustainability · doi:10.3390/su8010079 · Cited by 69 · cited 1×
“The allocation of weights to indicators is a qualitative process by nature [127].”
BackgroundQuader, M. A., Ahmed, S., Ghazilla, R. A. R., Ahmed, S., & Dahari, M. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.10.056 · Cited by 66 · cited 1×
“The Greenhouse Gases (GHG) level was the objective to investigate the cement industry [76,77], the new welding and turning technologies [78], iron and steel industry [79], the supply chain in the consumer goods industry [80], and an eco-industrial park [81].”
BackgroundGarretson, I. C., Mani, M., Sing, S. L., Lyons, K. W., & Haapala, K. R. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.08.103 · Cited by 66 · cited 1×
“Additionally, a framework was developed with guidelines for sustainability assessment [73], an array of technical terms used to describe production processes [74], and the inventory of research on sustainability assessment in manufacturing [75].”
MethodKang, Y., Xie, B.-C., Wang, J., & Wang, Y.-N. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.043 · Cited by 66 · cited 2×
“For example, eco-efficiency was the focus on evaluating improvements in production systems [30,31] in the definition of the investment strategy of Chinese manufacturing industries [32] and in the analysis of rubber processing in Sri Lanka [33].”
BackgroundAlkaya, E., & Demirer, G. N. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.087 · Cited by 64 · cited 1×
“In addition, environmental impact mitigation was the purpose to calculate the mass balance in automotive parts sectors [86], natural rubber [33], steel industry [87], cement industry [88], chemical industry [89,90], consumer goods, packaging, food and metalworking [31], particleboards [91], and pulp and paper [92].”
BackgroundFramework for prioritizing infrastructure user expectations using Quality Function Deployment (QFD)
Bolar, A. A., Tesfamariam, S., & Sadiq, R. (2017) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2017.02.002 · Cited by 64 · cited 2×
“Additionally, quantitative studies applied Quality Function Deployment (QFD) to define priorities for maintenance activities [44] and classify key performance indicators in manufacturing [45].”
BackgroundMethodZhu, Q., Lujia, F., Mayyas, A. T., Omar, M., Al-Hammadi, Y., & Saleh, S. A. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.02.066 · Cited by 61 · cited 1×
“In terms of energy management, research has proposed methods to increase energy efficiency in product deliveries [82], in light and heavy industries [32] in manufacturing industry departments [83], in plastic welding and injection processes [41], in the combined use of grid electricity and internal generation [84], an…”
BackgroundWeak and strong sustainability assessment in fisheries
Garmendia, E., Prellezo, R., Murillas, A., Escapa, M., & Gallastegui, M. C. (2010) · Ecological Economics · doi:10.1016/j.ecolecon.2010.08.001 · Cited by 60 · cited 1×
“[57] examined the role of critical thresholds and suggested tools to improve management and fishing regulation.”
BackgroundNeugebauer, S., Emara, Y., Hellerström, C., & Finkbeiner, M. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.172 · Cited by 57 · cited 2×
“[35] calculated fair wages throughout the product life cycle.”
BackgroundAssessing environmental sustainability of particleboard production process by ecological footprint
Saravia-Cortez, A. M., Herva, M., Diéguez, C., & Roca, E. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.02.006 · Cited by 56 · cited 1×
“In addition, environmental impact mitigation was the purpose to calculate the mass balance in automotive parts sectors [86], natural rubber [33], steel industry [87], cement industry [88], chemical industry [89,90], consumer goods, packaging, food and metalworking [31], particleboards [91], and pulp and paper [92].”
BackgroundNikolaou, I. E., & Tsalis, T. Α. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.042 · Cited by 53 · cited 1×
“In this context, studies developed frameworks for socio-environmental labelling in products and processes [50], actions to promote strong sustainability in business operations [19], and the application of natural capital as critical to identify priorities and policies for strong sustainability [51].”
BackgroundUehara, T., & Mineo, K. (2016) · Ecological Indicators · doi:10.1016/j.ecolind.2016.10.031 · Cited by 50 · cited 1×
“In Japan, Uehara and Mineo [23] proposed a framework to manage the integrated coastal zone with the perspective of strong sustainability through the definition of threshold values and system resilience.”
BackgroundImpact of the addition of oil-based mud on carbon dioxide emissions in a cement plant
Abdul-Wahab, S. A., Al-Rawas, G., Ali, S., & Al-Dhamri, H. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.062 · Cited by 42 · cited 1×
“The Greenhouse Gases (GHG) level was the objective to investigate the cement industry [76,77], the new welding and turning technologies [78], iron and steel industry [79], the supply chain in the consumer goods industry [80], and an eco-industrial park [81].”
BackgroundThe Emergy Perspective of Sustainable Trends in Puerto Rico From 1960 to 2013
González-Mejía, A. M., & Ma, X. C. (2016) · Ecological Economics · doi:10.1016/j.ecolecon.2016.11.007 · Cited by 36 · cited 1×
“Furthermore, Bai and Sarkis [93] applied a model based on flexibility and environment criteria to evaluate advanced manufacturing technologies in three global manufacturing companies and González-Mejía and Ma [94] used emerging flow dynamics to assess Puerto Rico’s sustainability over the transition period from an agr…”
MethodA framework for a research inventory of sustainability assessment in manufacturing
Lee, J. Y., & Lee, Y. T. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.004 · Cited by 34 · cited 1×
“Additionally, a framework was developed with guidelines for sustainability assessment [73], an array of technical terms used to describe production processes [74], and the inventory of research on sustainability assessment in manufacturing [75].”
MethodNeumayer, E. (2010) · Edward Elgar Publishing eBooks · doi:10.4337/9781849805438.00013 · Cited by 32
Initiating sustainability assessments: Insights from practice on a procedural perspective
Borgert, T., Donovan, J. D., Topple, C., & Masli, E. K. (2018) · Environmental Impact Assessment Review · doi:10.1016/j.eiar.2018.05.012 · Cited by 32 · cited 1×
“Case studies have identified factors that influence sustainability performance, drivers and barriers in companies in China [49], Indonesia [59], Taiwan [60], and the United Kingdom [61].”
BackgroundThe effects of dynamic industrial transition on sustainable development
Tsai, D. H. A. (2017) · Structural Change and Economic Dynamics · doi:10.1016/j.strueco.2017.10.002 · Cited by 31 · cited 3×
“In Taiwan, sustainability of twenty small and medium-sized enterprises of various segments [111] and medical products factory [108] were evaluated.”
BackgroundSaavalainen, P., Turpeinen, E., Omodara, L., Kabra, S. K., Oravisjärvi, K., Yadav, G. D., Keiski, R. L., & Pongrácz, É. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.145 · Cited by 27 · cited 1×
“In addition, environmental impact mitigation was the purpose to calculate the mass balance in automotive parts sectors [86], natural rubber [33], steel industry [87], cement industry [88], chemical industry [89,90], consumer goods, packaging, food and metalworking [31], particleboards [91], and pulp and paper [92].”
BackgroundWard, H., Burger, M., Chang, Y.-J., Fürstmann, P., Neugebauer, S., Radebach, A., Sproesser, G., Pittner, A., Rethmeier, M., Uhlmann, E., et al. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.062 · Cited by 26 · cited 1×
“The Greenhouse Gases (GHG) level was the objective to investigate the cement industry [76,77], the new welding and turning technologies [78], iron and steel industry [79], the supply chain in the consumer goods industry [80], and an eco-industrial park [81].”
BackgroundBishop, J. D. K., Amaratunga, G. A. J., & Rodríguez, C. (2009) · Electric Power Systems Research · doi:10.1016/j.epsr.2009.10.014 · Cited by 25 · cited 1×
“[56] proposed a model using strong sustainability to integrate electricity generation by composite fuels, which is able to reduce dependence on imported fuels and to increase the use of renewable sources for energy generation.”
BackgroundPerformance evaluation of advanced manufacturing technologies: A De novo approach
Nath, S., & Sarkar, B. (2017) · Computers & Industrial Engineering · doi:10.1016/j.cie.2017.06.018 · Cited by 25
Hong, S., Kweon, I., Bum-Hyun, L., & Kim, H. (2019) · Sustainability · doi:10.3390/su11236611 · Cited by 23 · cited 1×
“Sustainability evaluation systems are usually employed to reach sustainability [5].”
BackgroundRegional analysis across Colombian departments: a non-parametric study of energy use
Martínez, C. I. P., & Piña, W. H. A. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.019 · Cited by 21 · cited 1×
“In terms of energy management, research has proposed methods to increase energy efficiency in product deliveries [82], in light and heavy industries [32] in manufacturing industry departments [83], in plastic welding and injection processes [41], in the combined use of grid electricity and internal generation [84], an…”
BackgroundSustainability assessment of energy services using complex multi-layer system models
Coss, S., Clement, R., Verda, V., & Corre, O. L. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.08.134 · Cited by 17 · cited 1×
“Examples of this are the sustainability assessment of green buildings [8], sugarcane biofuel to support public policies [9], and sustainable solutions for energy service [10].”
BackgroundWhat does it really mean to be a strongly sustainable company? – A response to Nikolaou and Tsalis
Bjørn, A., & Røpke, I. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.268 · Cited by 15 · cited 3×
“This finding was also reported in the study by Bjørn and Røpke [21], who pointed out the need for an in-depth knowledge in environmental sciences to count ecosystem thresholds, which makes it difficult to approach strong sustainability in the corporate context.”
BackgroundMethodResultInfluentialMonte Carlo optimization for site selection of new chemical plants
Cai, T., Wang, S., & Xu, Q. (2015) · Journal of Environmental Management · doi:10.1016/j.jenvman.2015.08.002 · Cited by 12 · cited 1×
“The multi-criteria approach to sustainability supported decision-making to choose advanced manufacturing technologies [95], the best product design for gear manufacturing [37], the location of a new chemical plant [96], and machining alternatives to conventional processes [97].”
BackgroundTuretta, A. P. D., Kuyper, T. W., Malheiros, T. F., & Coutinho, H. L. D. C. (2017) · Land Use Policy · doi:10.1016/j.landusepol.2017.11.044 · Cited by 4 · cited 1×
“Examples of this are the sustainability assessment of green buildings [8], sugarcane biofuel to support public policies [9], and sustainable solutions for energy service [10].”
Background
Research works printed but not linked: 2
- Bell, J. (2005). Doing Your Research Project, Open University Press. [4th ed.].
- Miles, H., and Huberman, M. (1994). Qualitative Data Analysis: A Sourcebook, Sage Publications.
Cited by
Agarwal, S., Kweh, Q. L., Goh, K. W., & Wider, W. (2025) · Cleaner and Responsible Consumption · doi:10.1016/j.clrc.2025.100298 · Cited by 84
Industry 4.0 Implementation Projects: The Cleaner Production Strategy—A Literature Review
Sátyro, W. C., Contador, J. C., Monken, S. F., de Lima, A. F., Júnior, G. G. S., Gomes, J. A., Neves, J. V. S., do Nascimento, J. R., de Araújo, J. L., Correa, E. D. S., et al. (2023) · Sustainability · doi:10.3390/su15032161 · Cited by 74
Sarıkaya, M., Gupta, M. K., Tomaz, Í. D. V., Królczyk, G., Khanna, N., Karabulut, Ş., Prakash, C., & Buddhi, D. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133403 · Cited by 42
Sustainability Assessment in Manufacturing for Effectiveness: Challenges and Opportunities
Kumar, M., & Mani, M. (2022) · Frontiers in Sustainability · doi:10.3389/frsus.2022.837016 · Cited by 41
Pederneiras, Y. M., Pereira, M. A., & Figueira, J. R. (2021) · International Transactions in Operational Research · doi:10.1111/itor.12966 · Cited by 41
Metadata
- Authors
- Pinto, L. F. R., Venturini, G. D. F. P., Digiesi, S., Facchini, F., & Oliveira Neto, G. C. D.
- Affiliations
- Universidade Nove de Julho (BR)
- Polytechnic University of Bari (IT)
- Industrial Engineering Post-Graduation Program, Universidade Nove de Julho, Sao Paulo 01504-001, Brazil
- Corresponding author
- Pinto, Luiz Fernando Rodrigues
- ORCID
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2020-11-06
- Volume
- 12
- Issue
- 21
- Pages
- 9232
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W3094799302
- Cited by
- 34
- References
- 124
- Citations by year
- 2026: 2 · 2025: 6 · 2024: 9 · 2023: 7 · 2022: 3 · 2021: 7
- FWCI
- 3.89
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (88881.187669/2018-01)
- Topics
- Social Sciences › Business, Management and Accounting › Management of Technology and Innovation › Sustainability and Innovation in Business
- Physical Sciences › Environmental Science › Management, Monitoring, Policy and Law › Sustainable Development and Environmental Policy
- Social Sciences › Business, Management and Accounting › Marketing › Environmental Sustainability in Business
- Keywords
- strong sustainability, sustainability assessment, manufacturing companies, automotive industry, sustainability indicators, indicator weighting, expert survey, environmental performance, social performance, economic performance, socio-environmental development
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.