Characterisation and Environmental Value Proposition of Reuse Models for Fast-Moving Consumer Goods: Reusable Packaging and Products
Open accessThe DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index; 7 of the 117 sources its claims cite were checked for support.
Abstract
Problem: Fast-Moving Consumer Goods (FMCGs) are products that are purchased and consumed frequently to satisfy continuous consumer demand. In a linear economy, FMCGs are typically offered as single-use and disposable products. Limitations in product design, insufficient collection systems, and inefficient recovery processes prevent high recycling rates. As a result, FMCGs often end up in landfill or the environment, contributing to waste accumulation, and pollution. Whilst recycling is the most common waste prevention strategy practiced by the industry, the process is limited to addressing only the final stage of the product life cycle, omitting the overproduction and consumption of materials typical of FMCGs. Instead, reuse is a strategy that is capable of extending the value of resources by slowing material flows. Novel reuse models that require the consumer to interact with durable primary packaging and products are emerging in the FMCG industry. However, the constituent elements and operation principles of such reuse models are not fully understood. The aim of this research is to develop a comprehensive characterisation of reuse models and to evaluate their potential to deliver environmental value. Method: Ninety-two reuse offerings were selected and analysed to identify their reuse system elements. The analysis led to the identification of a framework including five reuse models, which were also evaluated to establish their capability to deliver environmental value when compared to conventional single-use and disposable FMCGs. Results: Currently in the FMCG sector, reusable products are mostly durable packaging, such as bottles and containers for beverages, foods, personal and home care goods, and are infrequently durable products, such as personal and baby care goods, including razors and nappies. Three reuse models involve exclusive reuse, a behaviour by which a reusable product is used and kept by a single user throughout the product lifetime. In exclusive reuse models, users are provided with either a reusable product (model 1), a reusable product with preparation for reuse infrastructure (model 2), or access to preparation for reuse infrastructure (model 3). Two reuse models involve sequential reuse, a behaviour by which a reusable product is used by multiple users throughout the product lifetime and returned after each use to a provider. In sequential reuse models, users are provided with either a reusable product with preparation for reuse infrastructure and provider-operated recovery services (model 4), or a reusable product and provider-operated services for recovery and preparation for reuse (model 5). Whilst the five reuse models can operate standalone, some offerings were found to embed a multi-model approach. Both exclusive and sequential reuse models are capable of delivering environmental value by reducing the use of natural resources and retaining their value in the economy. In particular, sequential reuse models were found to have a greater capability to increase the share of recyclable resources by offering access to infrastructure for the closure of material loops. Conclusions: Consumers can currently access five reuse models and choose between exclusive and sequential reuse behaviours. When adopted in conjunction with recycling, reuse models can enable a more efficient consumption of FMCGs. Providing the infrastructure necessary to enable reuse and recycling is key to the successful and sustainable deployment of the reuse models.
Overview
CoChat Summary
TL;DR
This paper analyses 92 fast-moving consumer goods reuse offerings and identifies five reuse models—three exclusive and two sequential—based on reuser behaviour, reusable product, and reuse-enabling infrastructure. It qualitatively evaluates their environmental value proposition, finding reuse models generally outperform the linear model on resource and value retention, though recyclability and material-loop closure remain weak.
Key findings
- From 92 reuse offerings, five models were identified: three exclusive reuse models (models 1–3) and two sequential reuse models (models 4–5); 88% of offerings centred on durable packaging and 12% on durable products.
- The sample covered beverages (n = 37), foods (n = 27), personal care (n = 25), home care (n = 18), baby care (n = 5), and transit packaging (n = 4); markets included Europe (n = 42), North America (n = 19), Asia (n = 7), South America (n = 3), Australia (n = 3), Africa (n = 2), and worldwide (n = 17), with 28% operating internationally.
- Reuse models were assessed as having greater capability than the linear model for minimised raw material use, minimised energy/water use, extended product lifetime, and reuse of components; sequential reuse models had greater capability than exclusive models and the linear model for closure of material loops.
- The paper reports examples including one FaceHalo durable make-up removal pad replacing up to 500 single-use pads, one Loop durable food packaging unit replacing up to 100 single-use units, Cif Ecorefill concentrated consumables reducing 80% of trucks used for distribution, and one SodaStream gas canister producing 60 litres of beverage.
Methods
- A dataset of 92 business-to-consumer reuse offerings in the FMCG market was collected using the Zero Waste Living Lab database, reuse literature, and internet searches; data were gathered between September 2019 and March 2020.
- Offerings were mapped by reuse system elements—reuser behaviour, reusable product, and reuse-enabling infrastructure—then grouped by common configurations into five reuse models.
- A qualitative environmental value proposition assessment scored each model’s capability (high/low) against six factors from an EEA/Manninen-derived framework and compared results with the linear FMCG model.
Limitations
- The paper states that reuse models are in early adoption, so novel models may emerge and require extending the five-model framework; the methodology characterises reuse system elements at a macro level and does not characterise consumer access to infrastructure; the EVP assessment is limited to three environmental themes and excludes social and economic aspects.
- The paper also states further research is needed on how models function in specific geographical regions, on recyclability of reusable products, on reuse of infrastructure, and on extending the framework to other industries such as fashion or electronics.
- Evident from the text: the EVP evaluation is a qualitative, author-scored comparison against literature rather than a quantitative life cycle assessment, and the provided full text contains extensive duplication and incomplete table rendering, which limits independent verification of some scoring details.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
4 Valid · 28 Not valid · 75 Not checked · 222 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This can motivate product stewardship through careful handling and return of shared products for the benefit of the successive reuser [32,60].”
§ Characterisation and Environmental Value Proposition of Reuse Models for Fast-Moving Consumer Goods: Reusable Packaging and Products > 5.3.1. F5. Extended Product Lifetime Keeping the Value of Product in Use
What the sources say
- Supportedcites [32] Vaughan, P.; Cook, M.; Trawick, P. A Sociology of Reuse: Deconstructing the Milk Bottle. Sociol. Rural. 2007, 47, 120-134. [CrossRef] source
The paper’s “Stewardship of care” section says users treated refillable milk bottles as borrowed objects, cleaned them carefully, and could be encouraged to handle and return them with care. Its account of bottles circulating among households supports the paraphrase that such stewardship helps make them available for subsequent users. (LLM, conf=0.88)
- Partly supportedcites [60] Jensen, J.; Remmen, A. Enabling Circular Economy Through Product Stewardship. Procedia Manuf. 2017, 8, 377-384. [CrossRef] sourceExperimental — accuracy not yet measured
The Introduction and §2, Product stewardship (pages unavailable), link product stewardship to preparing products for reuse across life cycles. They do not say that sharing motivates users to handle products carefully or return them for the next user. (LLM, conf=0.78)
plainstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Currently in the FMCG sector, reusable products are mostly durable packaging, such as bottles and containers for beverages, foods, personal and home care goods, and are infrequently durable products, such as personal and baby care goods, including razors and nappies.”
§ Characterisation and Environmental Value Proposition of Reuse Models for Fast-Moving Consumer Goods: Reusable Packaging and Products > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Currently in the FMCG sector, reusable products are mostly durable packaging, such as bottles and containers for beverages, foods, personal and home care goods, and are infrequently durable products, such as personal and baby care goods, including razors and nappies.”
§ Characterisation and Environmental Value Proposition of Reuse Models for Fast-Moving Consumer Goods: Reusable Packaging and Products > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In particular, sequential reuse models were found to have a greater capability to increase the share of recyclable resources by offering access to infrastructure for the closure of material loops.”
§ Characterisation and Environmental Value Proposition of Reuse Models for Fast-Moving Consumer Goods: Reusable Packaging and Products > Abstract
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Both exclusive and sequential reuse models are capable of delivering environmental value by reducing the use of natural resources and retaining their value in the economy.”
§ Characterisation and Environmental Value Proposition of Reuse Models for Fast-Moving Consumer Goods: Reusable Packaging and Products > Abstract
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
109 more claims
Create a free account to see all 329 claims and to verify the 110 references still open.
- It may state two separate claims as one. 70
- Probably not a substantial claim. 167
- The quote only partly states this claim. 1
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The studies by Mahmoudi and Parviziomran (2020) and Muranko et al. (2021) revealed that consumers are sometimes reluctant to purchase products with refillable packaging.”
From Packaging design for the circular economy: A systematic review (2022) · cites this paper as Muranko et al., 2021
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Characterisation and Environmental Value Proposition of Reuse Models for Fast-Moving Consumer Goods: Reusable Packaging and Products > 2.1. Reuse of FMCGs
“In the EU Waste Framework Directive (Directive 2008/98/EC [12]), reuse occupies a prominent position”
§ Characterisation and Environmental Value Proposition of Reuse Models for Fast-Moving Consumer Goods: Reusable Packaging and Products > References
“12. European Commission. Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 Establishing a Framework for the Setting of Ecodesign Requirements for Energy-Related Products.”
Citations
Cites
Product design and business model strategies for a circular economy
Bocken, N. M. P., de Pauw, I., Bakker, C., & van der Grinten, B. (2016) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2016.1172124 · Cited by 4,002
Eight types of product–service system: Eight ways to sustainability? Experiences from SusProNet
Tukker, A. (2004) · Business Strategy and the Environment · doi:10.1002/bse.414 · Cited by 2,456
Clarifying the concept of Product-Service System
Mont, O. K. (2002) · Journal of Cleaner Production · doi:10.1016/s0959-6526(01)00039-7 · Cited by 2,174
Product Design in a Circular Economy: Development of a Typology of Key Concepts and Terms
den Hollander, M. C., Bakker, C. A., & Hultink, E. J. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12610 · Cited by 736
Geueke, B., Groh, K., & Muncke, J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.005 · Cited by 673
Fast fashion: response to changes in the fashion industry
Bhardwaj, V., & Fairhurst, A. (2010) · The International Review of Retail, Distribution and Consumer Research · doi:10.1080/09593960903498300 · Cited by 642
Sustainable consumption and production in the food supply chain: A conceptual framework
Govindan, K. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2017.03.003 · Cited by 539
Do circular economy business models capture intended environmental value propositions?
Manninen, K., Koskela, S., Antikainen, R., Bocken, N., Dahlbo, H., & Aminoff, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.003 · Cited by 488 · cited 2×
“(e.g., high food miles) [ reduced inputs of virgin materials the FMCG sector still makes”
BackgroundSustainability of reusable packaging–Current situation and trends
Coelho, P. M., Corona, B., ten Klooster, R., & Worrell, E. (2020) · Resources, Conservation & Recycling: X · doi:10.1016/j.rcrx.2020.100037 · Cited by 381
Hahladakis, J. N., & Iacovidou, E. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.120887 · Cited by 307 · cited 1×
“An example of model 5b is sequentially reused durable vessels (i.e., facilitators) containing foods (i.e., consumables) (e.g., Loop, image 17 in Figure A2).”
MethodDesign for Circular Behaviour: Considering Users in a Circular Economy
Wastling, T., Charnley, F., & Moreno, M. (2018) · Sustainability · doi:10.3390/su10061743 · Cited by 264
Accorsi, R., Cascini, A., Cholette, S., Manzini, R., & Mora, C. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.12.014 · Cited by 247
Fast Fashion: Business Model Overview and Research Opportunities
Caro, F., & Martínez-de-Albéniz, V. (2015) · International Series in Operations Research & Management Science · doi:10.1007/978-1-4899-7562-1_9 · Cited by 212
Quality Assessment and Circularity Potential of Recovery Systems for Household Plastic Waste
Eriksen, M. K., Damgaard, A., Boldrin, A., & Astrup, T. F. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12822 · Cited by 211 · cited 1×
“(e.g., high food miles) [ reduced inputs of virgin materials the FMCG sector still makes”
BackgroundThe Circular Economy Handbook: Realizing the Circular Advantage
Lacy, P., Long, J., & Spindler, W. (2020) · Palgrave Macmillan UK eBooks · doi:10.1057/978-1-349-95968-6 · Cited by 195
Mahmoudi, M., & Parviziomran, I. (2020) · International Journal of Production Economics · doi:10.1016/j.ijpe.2020.107730 · Cited by 192
Lifespan of Commodities, Part I: The Creation of a Database and Its Review
Murakami, S., Oguchi, M., Tasaki, T., Daigo, I., & Hashimoto, S. (2010) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2010.00250.x · Cited by 191
Mugge, R., Schoormans, J. P. L., & Schifferstein, H. N. J. (2005) · The Design Journal · doi:10.2752/146069205789331637 · Cited by 170 · cited 5×
“, emotional durability [58], personproduct relationship [59],product stewardship [32,60], and product perception , e.”
BackgroundInfluentialLife cycle environmental impacts of carbonated soft drinks
Amienyo, D., Gujba, H., Stichnothe, H., & Azapagic, A. (2013) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0459-y · Cited by 165
Poortinga, W., & Whitaker, L. (2018) · Sustainability · doi:10.3390/su10030873 · Cited by 162 · cited 1×
“…the reuse models section presents a qualitative assessment of the capability of the This section presents a qualitative assessment of the Resource-efficient processing FMCGs is resource-intensive, due to the processing of materials, the and use of natural resources 5 - FMCGs are made for single-use”
BackgroundFrom single-use to multi-use: Study of consumers' behavior toward consumption of reusable containers
Ertz, M., Huang, R., Jo, M.-S., Karakas, F., & Sarigöllü, E. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.01.060 · Cited by 161 · cited 8×
“Environmental Value Proposition of Reuse Models This section presents a qualitative 5.”
BackgroundInfluentialEnvironmental impacts of takeaway food containers
Gallego-Schmid, A., Mendoza, J. M. F., & Azapagic, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.220 · Cited by 159
Rosa, P., Sassanelli, C., & Terzi, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.310 · Cited by 159
Zhou, G., Gu, Y., Wu, Y., Gong, Y., Mu, X., Han, H., & Chang, T. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119660 · Cited by 151
Bortolini, M., Galizia, F. G., Mora, C., Botti, L., & Rosano, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.231 · Cited by 141
Contaminated Interaction: Another Barrier to Circular Material Flows
Baxter, W., Aurisicchio, M., & Childs, P. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12612 · Cited by 133
Self-citationEnabling Circular Economy Through Product Stewardship
Jensen, J. P., & Remmen, A. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.02.048 · Cited by 130
Cimpan, C., Maul, A., Wenzel, H., & Pretz, T. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.011 · Cited by 116
A psychological ownership approach to designing object attachment
Baxter, W. L., Aurisicchio, M., & Childs, P. R. N. (2015) · Journal of Engineering Design · doi:10.1080/09544828.2015.1030371 · Cited by 97
Accorsi, R., Baruffaldi, G., & Manzini, R. (2020) · Sustainable Production and Consumption · doi:10.1016/j.spc.2020.06.014 · Cited by 96
Innovative approaches to optimising design and use of durable consumer goods
Mont, O. (2008) · International Journal of Product Development · doi:10.1504/ijpd.2008.020395 · Cited by 90
Promoting reuse behaviour: Challenges and strategies for repeat purchase, low-involvement products
Kunamaneni, S., Jassi, S., & Hoang, D. (2019) · Sustainable Production and Consumption · doi:10.1016/j.spc.2019.07.001 · Cited by 88 · cited 1×
“Some offerings allow consumers the choice to reuse a product exclusively or sequentially.”
BackgroundA design tool to diagnose product recyclability during product design phase
de Aguiar, J., de Oliveira, L., da Silva, J. O., Bond, D., Scalice, R. K., & Becker, D. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.09.074 · Cited by 86 · cited 4×
“Linear Model – service”
BackgroundInfluentialHait, A., & Powers, S. E. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.104422 · Cited by 77
Choice of materials for takeaway beverage cups towards a circular economy
Changwichan, K., & Gheewala, S. H. (2020) · Sustainable Production and Consumption · doi:10.1016/j.spc.2020.02.004 · Cited by 75
Life cycle assessment of innovative circular business models for modern cloth diapers
Hoffmann, B. S., Morais, J. D. S., & Teodoro, P. F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119364 · Cited by 72
Nodarou, E., Frederick, C., & Hein, A. (2008) · Journal of Archaeological Science · doi:10.1016/j.jas.2008.06.014 · Cited by 71
A product design framework for a circular economy
den Berg, M. R. V., & Bakker, C. A. (2015) · Research Repository (Delft University of Technology) · Cited by 71
Breen, L. (2006) · Management Research News · doi:10.1108/01409170610708989 · Cited by 65
Lofthouse, V. A., Bhamra, T. A., & Trimingham, R. L. (2009) · Packaging Technology and Science · doi:10.1002/pts.857 · Cited by 61
Future scenarios for fast-moving consumer goods in a circular economy
Kuzmina, K., Prendeville, S., Walker, D., & Charnley, F. (2019) · Futures · doi:10.1016/j.futures.2018.12.001 · Cited by 55 · cited 2×
“…for single-use EVP value, which is summarised in Table 3. environmental value, which is summarised in Table 3. deliver environmental value, which is summarised in Table 3. deliver environmental value, which is summarised in Table 3. deliver environmental value, which is summarised in which reduced”
BackgroundExperimenting with sustainable business models in fast moving consumer goods
Bashir, H., Jørgensen, S., Pedersen, L. J. T., & Skard, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122302 · Cited by 49 · cited 1×
“…Value Proposition of Reuse This section a qualitative assessment of the capability of the reuse models section presents a qualitative assessment of the capability of the This section presents a qualitative assessment of the Resource-efficient processing FMCGs is resource-intensive, due to…”
BackgroundA framework to use product-service systems as plans to produce closed-loop resource flows
van der Laan, A. Z., & Aurisicchio, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119733 · Cited by 47
Self-citationArchetypical consumer roles in closing the loops of resource flows for Fast-Moving Consumer Goods
Zeeuw van der Laan, A., & Aurisicchio, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.306 · Cited by 45
Self-citationAnalyzing the environmental sustainability of glass bottles reuse in an Italian wine consortium
Landi, D., Germani, M., & Marconi, M. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.01.054 · Cited by 42
On the brink of a recycling revolution?
Carey, J. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1620655114 · Cited by 41 · cited 1×
“(e.g., high food miles) [ reduced inputs of virgin materials the FMCG sector still makes”
BackgroundA Sociology of Reuse: Deconstructing the Milk Bottle
Vaughan, P., Cook, M., & Trawick, P. (2007) · Sociologia Ruralis · doi:10.1111/j.1467-9523.2007.00432.x · Cited by 35
Reinventing refills: guidelines for design
Lofthouse, V., Trimingham, R., & Bhamra, T. (2017) · Packaging Technology and Science · doi:10.1002/pts.2337 · Cited by 34 · cited 2×
“[29] identified a set of perceived positive and negative attributes of refill systems (e.”
BackgroundDamme, I. V., & Vermoesen, R. (2009) · Continuity and Change · doi:10.1017/s0268416009007188 · Cited by 31 · cited 1×
“For example, some food refill station companies (e.g., Miwa) provide the exclusive reuse option, where consumers can use an in-store dispenser by utilising a reusable product purchased either from the provider of the dispenser (model 2) or elsewhere (model 3).”
BackgroundPalmer, A., Mortimer, P., Greening, P., Piecyk, M., & Dadhich, P. (2018) · Transportation Research Part D Transport and Environment · doi:10.1016/j.trd.2017.11.009 · Cited by 29
Product–Service Systems Applied to Reusable Packaging Systems: A Strategic Design Tool
Yuan, L., Ceschin, F., Mansour, N., & Harrison, D. J. (2020) · Design Management Journal (Former Series) · doi:10.1111/dmj.12057 · Cited by 29 · cited 1×
“…materials [3,49,50] the FMCG sector still makes extensive utilisation of virgin materials due to the large market and At the same time, the return of a reusable product to the provider influences the sequential reuse of the transit packaging. has been used by 19 of 35 growing population. methods 3”
MethodUnderstanding recycling behavior: a study of motivational factors behind waste recycling
Johansson, K. (2016) · WIT Transactions on Ecology and the Environment · doi:10.2495/wm160361 · Cited by 27 · cited 10×
“F4 Closure of material loops I Recycling-enabling infrastructure - established coll ction infrastructure [7,8,53,56] - established recovery technology [8,56] - Collection infr structure for recyclables is established, and end-of-life FMCGs e retrieved for recycling, although kerbside i frastr cture is insuffi ient to…”
BackgroundInfluentialCampus bottled water bans, not always the solution
Choate, B. A., Davis, B. Y., & Verrecchia, J. (2018) · International Journal of Sustainability in Higher Education · doi:10.1108/ijshe-06-2017-0089 · Cited by 26
Evaluating the progress of the UK’s Material Recycling Facilities: A mini review
Ali, M., & Courtenay, P. (2014) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x14554645 · Cited by 25
Hayashi, N., Koyanaka, S., & Oki, T. (2019) · Waste Management · doi:10.1016/j.wasman.2019.03.065 · Cited by 23
Environmental Implications of Reuse and Recycling of Packaging
Radhakrishnan, S. (2015) · Environmental footprints and eco-design of products and processes · doi:10.1007/978-981-287-913-4_7 · Cited by 22
Designing Product-Service Systems to Close Resource Loops: Circular Design Guidelines
van der Laan, A. Z., & Aurisicchio, M. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.01.079 · Cited by 22
Self-citationReuse principle for primary packaging circularity in the food system
Sæter, F., Alvarado, I. A. O., & Pettersen, I. N. (2020) · NordDesign Conference (NordDesign) · doi:10.35199/norddesign2020.3 · Cited by 20 · cited 1×
“On the other hand, a disadvantage of these models is that they require substantially greater consumer effort in comparison to the linear model (where products are made “ready for consumption” and easily replaced following their disposal) [85].”
BackgroundBetter than bottled water?—Energy and climate change impacts of on-the-go drinking water stations
Makov, T., Meylan, G., Powell, J. T., & Shepon, A. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2016.11.010 · Cited by 19 · cited 3×
“Linear Model – service”
BackgroundSustainable local economic development: A new agenda for action?
Newby, L. (1999) · Local Environment · doi:10.1080/13549839908725582 · Cited by 18
In the Crosshairs: Single‐Use, Disposable Packaging
Grace, R. A. (2019) · Plastics Engineering · doi:10.1002/peng.20105 · Cited by 7
Potentially changing health behaviour using nappy ‘nudges’
Miller, J., Bennett, C., & Cumming, G. (2011) · British Journal of Midwifery · doi:10.12968/bjom.2011.19.4.246 · Cited by 6 · cited 1×
“…the reuse models section presents a qualitative assessment of the capability of the This section presents a qualitative assessment of the Resource-efficient processing FMCGs is resource-intensive, due to the processing of materials, the and use of natural resources 5 - FMCGs are made for single-use”
BackgroundEltawy, N., & Gallear, D. (2012) · Brunel University Research Archive (BURA) (Brunel University London) · Cited by 4
Investigation into the drivers and barriers affecting refillable packaging
Lofthouse, V., & Bhamra, T. (2006) · Loughborough University Institutional Repository (Loughborough University) · Cited by 3
Clark, G. (1990) · Cited by 1
Normalising Bottle Reuse: Lessons from the Victorians on the Limits of Voluntary Schemes
Licence, T. (2020) · UEA Digital Repository (University of East Anglia) · Cited by 1
Research works printed but not linked: 7
- Ellen MacArthur Foundation. Towards a Circular Economy Vol.3: Accelerating the Scale-Up across Global Supply Chains; Ellen MacArthur Foundation: Cowes, UK, 2014.
- Ellen MacArthur Foundation. Towards the Circular Economy Vol. 2: Opportunities for the Consumer Goods Sector; Ellen MacArthur Foundation: Cowes, UK, 2013.
- Kavanagh, R. A Reconsideration of Razors in the Irish Earlier Bronze Age. J. R. Soc. Antiqu. Irel. 1991, 121, 77-104.
- Mansour, N.; Ceschin, F.; Harrison, D.; Long, Y. Mapping and classifying business models to replace single-use packaging in the food and beverage industry: A strategic design tool. Learn. Netw. Sustain. 2019, 6, 418-422.
- Tassell, C.; Aurisicchio, M. The Evolution of Reuse and Recycling Behaviours: An Integrative Review with Application to the Fast-Moving Consumer Goods Industry. In Proceedings of the IS4CE2020 Conference of the International Society for the Circular Economy, Exeter, UK, 6-7 July 2020; University of Exeter: Exeter, UK, 2020.
- Zeeuw van der Laan, A.; Aurisicchio, M. Gateways to Revalorisation in Future Circular Cities: A Vision for Closed-Loop Resource Flows. In Proceedings of the Sustainable Innovation. 22nd International Conference. Road to 2030: Sustainability, Business Models, Innovation and Design, Epsom, UK, 4-5 March 2019; pp. 113-119.
- Muranko, Ż.; Aurisicchio, M.; Baxter, W.; Childs, P. Behaviour chains in circular consumption systems: The reuse of FMCGs. In Proceedings of the IS4CE2020 Conference of the International Society for the Circular Economy, Exeter, UK, 6-7 July 2020; University of Exeter: Exeter, UK, 2020.
Cited by
Packaging design for the circular economy: A systematic review
Zhu, Z., Liu, W., Ye, S., & Batista, L. (2022) · Sustainable Production and Consumption · doi:10.1016/j.spc.2022.06.005 · Cited by 204
“The studies by Mahmoudi and Parviziomran (2020) and Muranko et al. (2021) revealed that consumers are sometimes reluctant to purchase products with re fi llable packaging.”
BackgroundNeed for Sustainable Packaging: An Overview
Ibrahim, I. D., Hamam, Y., Sadiku, E. R., Ndambuki, J. M., Kupolati, W. K., Jamiru, T., Eze, A. A., & Snyman, J. (2022) · Polymers · doi:10.3390/polym14204430 · Cited by 189
“These approaches could be material recycling and reuse [13,14], the choice of materials [15], and the use of bio-based and biodegradable materials [16,17].”
BackgroundBocken, N. M. P., Harsch, A., & Weissbrod, I. (2022) · Sustainable Production and Consumption · doi:10.1016/j.spc.2022.01.012 · Cited by 185
A literature review and analytical framework of the sustainability of reusable packaging
Bradley, C. G., & Corsini, L. (2023) · Sustainable Production and Consumption · doi:10.1016/j.spc.2023.02.009 · Cited by 146
Miao, X., Magnier, L., & Mugge, R. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.106972 · Cited by 125
“RPSs can be broadly divided into two types (Greenwood et al., 2021; Muranko et al., 2021): (1) returnable packaging systems, where the companies in the supply chain repeatedly clean and refill the packaging with products (e. g. Tesco) and (2) refillable packaging systems, where consumers are…”
Metadata
- Authors
- Muranko, Ż., Tassell, C., Zeeuw van der Laan, A., & Aurisicchio, M.
- Affiliations
- Imperial College London (GB)
- Dyson School of Design Engineering, Imperial College London, London SW7 2DB, UK
- Corresponding author
- Muranko, Żaneta
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2021-03-01
- Volume
- 13
- Issue
- 5
- Pages
- 2609
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W3135389886
- Cited by
- 89
- References
- 66
- Citations by year
- 2026: 16 · 2025: 17 · 2024: 19 · 2023: 22 · 2022: 10 · 2021: 5
- FWCI
- 12.49
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Spiral (Imperial College London) (submittedVersion, other-oa)
- Funders
- UK Engineering and Physical Sciences Research Council (EPSRC) (EP/S025456/1)
- Topics
- Social Sciences › Business, Management and Accounting › Strategy and Management › Sustainable Supply Chain Management
- Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
- Social Sciences › Business, Management and Accounting › Marketing › Environmental Sustainability in Business
- Keywords
- reusable packaging, fast-moving consumer goods, environmental values, resource efficiency, circular economy, single-use products, waste reduction, material flow, product design
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.