Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature
Open accessThe DOI matches its Crossref record; 48 of the 50 references it cites were found in a registry or an index; 10 of the 77 sources its claims cite were checked for support.
Abstract
The literature on change management stresses that about 70% of change initiatives fail to achieve their goals due to implementation mistakes or neglect of relevant aspects such as lack of management support, clearly defined objectives, and poor communication.
Overview
CoChat Summary
TL;DR
This systematic literature review examines whether existing digital transformation models (DTMs) and roadmaps for Industry 4.0 incorporate lessons from change management. It finds that extant DTMs mainly focus on manufacturing and on defining I4.0 vision, strategy, and roadmap, while implementation, consolidation, resistance management, and monitoring receive limited attention.
Key findings
- The review identified 13 contributions fitting the review question, described as eight from grey literature and ten from academic literature (the text reports these numbers inconsistently); most DTMs focus on manufacturing companies, with only one model [64] focused on another industry, insurance.
- Most DTMs emphasize I4.0 vision, strategy, and roadmap definition; implementation and consolidation are often neglected. Only a few academic DTMs propose pilot projects [51,56,57], while most consulting-firm DTMs propose such a step.
- Change-management lessons are considered to a limited extent: no DTM explicitly includes identifying and managing resistance to change; few include monitoring change (Le Grand et al. [53], Butt [58], Accenture); only some include consolidating change (Capgemini, Deloitte, McKinsey).
- The paper recommends strong top-management leadership, digital maturity assessment, vision/strategy/roadmap communication, a transition team, pilot projects, a resistance-management plan, training, monitoring, and consolidation; it also suggests a participatory and human-centric approach for I4.0 and I5.0.
Methods
- A systematic literature review followed Denyer and Tranfield’s five steps; Scopus was searched at the end of January 2021, limited to English. Query 1 retrieved 254 records; query 2 retrieved 3135; 83 duplicates were removed, reducing the set to 3306; screening by document type and relevance yielded 183 documents; 10 were excluded because full text was unavailable; full texts were then examined for change models, steps, methodologies, or processes.
- Eight additional grey-literature contributions were retrieved from major consulting firms’ websites. Retrieved DTMs were analyzed and compared on phases, tools and methods, involved stakeholders, focus, theoretical approach, development, and test; they were then compared under change-management activities contextualized to I4.0.
Limitations
- No dedicated limitations section is stated; the paper notes that searches were limited to English and Scopus, plus grey literature from consulting firms’ websites, and that academic contributions included in the review are available on Scopus.
- Evident from the text: the reported count of DTMs is internally inconsistent (“13 contributions” versus “eight … from grey literature and the remaining ten from academic literature”), and the review relies on what each model explicitly mentions.
- Evident from the text: the paper’s recommendations are not empirically tested in the study; it notes that most consulting DTMs are not based on theoretical approaches and that most academic DTMs were tested in real contexts, but no validation of the synthesized recommendations is reported.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
Verification
Claims the paper makes
8 Valid · 3 Not valid · 47 Not checked · 38 Own results and interpretations
Some cited sources support this claim and some don’t — read each source’s verdict below.
In the paper
“Only a few DTMs retrieved from the academic literature propose conducting pilot projects [51,56,57].”
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > Results of the comparison are reported in
What the sources say
- Disputedcites [51] Issa, A., Hatiboglu, B., Bildstein, A., and Bauernhansl, T. (2018, January 16–18). Industrie 4.0 roadmap: Framework for digital transformation based on the concepts of capability maturity and alignment. Proceedings of the 51st CIRP Conference on Manufacturing Systems, CIRP CMS 2018, Stockholm, Sweden. sourceExperimental — accuracy not yet measured
In §1.1, the paper describes existing pilot projects as inadequate for full digital transformation because they overlook organizational factors. Its proposed roadmap (§2.3) instead emphasizes an integrative approach; the cited paper does not propose conducting pilot projects. (LLM, conf=0.73)
Checked by a reasoning model — may be wrong.
- Supportedcites [56] Pessl, E., Sorko, S.R., and Mayer, B. (2017, January 14–18). Roadmap industry 4.0—Implementation guideline for enterprises. Proceedings of the 26th International Association for Management of Technology Conference, IAMOT, Vienna, Austria. source
Section 2.3, Step 6, advises starting Industry 4.0 implementation with pilot projects and using the experience in later planning. The paper therefore supports its use as an example of a roadmap that proposes pilot projects; the count of such roadmaps is the citing authors’ synthesis, not a finding attributed to this individual source. (LLM, conf=0.91)
- Not matchedcites [57] Leone, D., and Barni, A. (September, January 30). Industry 4.0 on Demand: A Value Driven Methodology to Implement Industry 4.0. Proceedings of the IFIP International Conference Advances in Information and Communication Technology, Novi Sad, Serbia.
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Disputed
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Partially revising the extant literature, Schallmo et al. [50] developed a roadmap for digital transformation for the I4.0 transition that consists of the following five phases:”
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > 4.2. Digital Transformation Models
What the sources say
- Partly supportedcites [50] Schallmo, 2017, Digital transformation of business models-best practice, enablers, and roadmap, Int. J. Innov. Manag. sourceExperimental — accuracy not yet measured
The Research design (p. 7) lists five phases, and the concluding passage (p. 14) calls this an integrated five-phase roadmap for digital transformation of business models. The paper does not present it specifically as a roadmap for the Industry 4.0 transition; that qualification goes beyond what the cited passages support. (LLM, conf=0.86)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“From an organizational perspective, the DTMs provided by Issa et al. [51] and Butt [58] are the only academic models that envisage the creation of an ad-hoc task force to organize and manage the digital transformation initiative.”
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > Results of the comparison are reported in
What the sources say
- Supportedcites [51] Issa, A., Hatiboglu, B., Bildstein, A., and Bauernhansl, T. (2018, January 16–18). Industrie 4.0 roadmap: Framework for digital transformation based on the concepts of capability maturity and alignment. Proceedings of the 51st CIRP Conference on Manufacturing Systems, CIRP CMS 2018, Stockholm, Sweden. source
Section 2.3 makes task-force setup the first step of the proposed digital-transformation roadmapping process and assigns the task force a role in assessing and discussing the results. Section 3.1 describes the task force assembled when the process was applied. The comparison with other academic models is the citing authors’ framing, not a finding attributed to Issa et al. alone. (LLM, conf=0.90)
- Not checked — no full text of the sourcecites [58] Butt, J. (2020). A conceptual framework to support digital transformation in manufacturing using an integrated business process management approach. Designs, 4. source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Change management lessons are considered to a limited extent”
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
In the paper
“The analysis of the literature review results also reveals a scarcity of contributions dealing with the overall process of digital transformation and providing complete and structured models to support organizations in the transition towards the I4.0 paradigm [10].”
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > 4.2. Digital Transformation Models
What the sources say
- Not matchedcites [10] Bordeleau, F.-È., and Felden, C. (2019, January 8–14). Digitally transforming organisations: A review of change models of industry 4.0. Proceedings of the 27th European Conference on Information Systems: Information Systems for a Sharing Society, ECIS 2019, Stockholm and Uppsala, Sweden.
Couldn’t be matched to a paper in Crossref, so it can’t be checked.
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Not matched
36 more claims
Create a free account to see all 96 claims and to verify the 27 references still open.
- Probably not a substantial claim. 42
- It may state two separate claims as one. 31
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated major: it would touch a result — a value a result rests on, reported and recomputed p-values on opposite sides of the significance level, two passages that conflict with no sign which is right, or a cited work retracted before this paper was published.
In the paper
“The systematic review process depicted in Figure 1 allowed the identification of a total of 13 contributions that fit the review question.Such models, eight of which from grey literature and the remaining ten from academic literature, are described below.”
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > 4.2. Digital Transformation Models
Reported 13 · recomputed 18
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > 7. Conclusions
“| Pessl et al. (2020) [56] |”
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > References
“56. Pessl, E.; Sorko, S.R.; Mayer, B. Roadmap industry 4.0-Implementation guideline for enterprises. In Proceedings of the 26th International Association for Management of Technology Conference, IAMOT, Vienna, Austria, 14-18 May 2017; Volume 5, pp. 193-202.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > Results of the comparison are reported in
“Only the model proposed by Accenture envisages such an aspect, since it suggests setting digital key performance indicators for personnel in all areas of the organization to monitor their digital performance.”
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > 2.
“Companies should appoint a launch team, often led by a chief digital officer (CDO) to coordinate the transformation, decide the sequence of the transformation, ensure the appropriate technology and skills and monitor progress against targets.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > 5.1. Comparison of DTMs
“Only three DTMs-i.e., Erol et al. [49], Romero et al. [52] and Butt [58]-explicitly mention the theoretical approach used to develop them”
§ Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature > 7. Conclusions
“| all stakeholders affected by the digital change | - | agile change management | business changes survey administrated to professionals with experience in | bank digital transformation project | |”
Citations
Cites
Tranfield, D., Denyer, D., & Smart, P. (2003) · British Journal of Management · doi:10.1111/1467-8551.00375 · Cited by 15,386 · cited 1×
“To identify the existing DTMs, we conducted a systematic literature review (SLR), an approach that Tranfield et al. [22,23] suggest as also suitable in the field of management research.”
MethodLeading change: why transformation efforts fail
Kotter, J. P. (2009) · IEEE Engineering Management Review · doi:10.1109/emr.2009.5235501 · Cited by 3,566
How Smart, Connected Products Are Transforming Competition
Porter, M. E., & Heppelmann, J. E. (2014) · Harvard business review · Cited by 2,600
(2009) · Cited by 2,062
Organization Development and Change: Foundations and Applications
Cummings, T. (2004) · Dynamics of Organizational Change and Learning · doi:10.1002/9780470753408.ch2 · Cited by 1,821
A Maturity Model for Assessing Industry 4.0 Readiness and Maturity of Manufacturing Enterprises
Schumacher, A., Erol, S., & Sihn, W. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.07.040 · Cited by 1,766 · cited 1×
“…that fit the review question. many studies reported the development of maturity models to assess the digital of manufacturing companies [24–28]; among Such models, eight of which from grey literature and the remaining ten from academic literature, are described below. them, many…”
BackgroundHow Smart, Connected Products Are Transforming Competition
ポーター, マ. E., ヘプルマン, ジ. E., & 有賀, 裕. (2015) · Harvard business review · Cited by 1,550
Leading change: Why transformation efforts fail
(1995) · Long Range Planning · doi:10.1016/0024-6301(95)91633-4 · Cited by 1,188
Mittal, S., Khan, M. A., Romero, D., & Wuest, T. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.10.005 · Cited by 1,121 · cited 1×
“Critical reviews [39–43] of existing I4.”
Change Through Digitization—Value Creation in the Age of Industry 4.0
Kagermann, H. (2015) · Management of Permanent Change · doi:10.1007/978-3-658-05014-6_2 · Cited by 838
Research works printed but not linked: 6
- Bordeleau, F.-È., and Felden, C. (2019, January 8–14). Digitally transforming organisations: A review of change models of industry 4.0. Proceedings of the 27th European Conference on Information Systems: Information Systems for a Sharing Society, ECIS 2019, Stockholm and Uppsala, Sweden.
- Burnes, B. (2004). Managing Change: A Strategic Approach to Organisational Dynamics, Pearson Education.
- Senior, B., and Fleming, J. (2006). Organizational Change, Pearson Education.
- Azevedo, A., and Santiago, S.B. (2019, January 23–25). Design of an assessment industry 4.0 maturity model: An application to manufacturing company. Proceedings of the International Conference on Industrial Engineering and Operations Management, Toronto, ON, Canada.
- Facchini, F., Digiesi, S., Mossa, G., and Mummolo, G. (2018, January 12–14). Evaluating the I4.0 transformation readiness of agri-food companies: From factories to ‘smart’ factories. Proceedings of the Summer School Francesco Turco, Palermo, Italy.
- Erol, S., Schumacher, A., and Sihn, W. (2016, January 27–29). Strategic guidance towards Industry 4.0—A three-stage process model. Proceedings of the International conference on competitive manufacturing, COMA, Stellenbosch, South Africa.
Cited by
Digital transformation: A meta-review and guidelines for future research
Reis, J., & Melão, N. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e12834 · Cited by 164
Sharma, M., Joshi, S., & Govindan, K. (2023) · Sustainable Production and Consumption · doi:10.1016/j.spc.2023.04.002 · Cited by 162
Business Digital Maturity in Europe and Its Implication for Open Innovation
Tutak, M., & Brodny, J. (2022) · Journal of Open Innovation Technology Market and Complexity · doi:10.3390/joitmc8010027 · Cited by 115
Debnath, B., Shakur, M. S., Bari, A. B. M. M., Saha, J., Porna, W. A., Mishu, M. J., Islam, A. R. M. T., & Rahman, M. (2023) · PLoS ONE · doi:10.1371/journal.pone.0287149 · Cited by 80
Saihi, A., Ben‐Daya, M., & As’ad, R. A. (2022) · International Journal of Production Economics · doi:10.1016/j.ijpe.2022.108701 · Cited by 69
Metadata
- Authors
- Bellantuono, N., Nuzzi, A., Pontrandolfo, P., & Scozzi, B.
- Affiliations
- University of Foggia (IT)
- Polytechnic University of Bari (IT)
- Corresponding author
- Nuzzi, Angela
- Venue
- Sustainability
- Publisher
- MDPI AG
- Published
- 2021-11-23
- Volume
- 13
- Issue
- 23
- Pages
- 12941
- ISSN
- 2071-1050 (ISSN-L)
- OpenAlex
- W3215055921
- Cited by
- 146
- References
- 50
- Citations by year
- 2026: 31 · 2025: 37 · 2024: 37 · 2023: 27 · 2022: 14
- FWCI
- 10.09
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Sustainability (publishedVersion, cc-by)
- RePEc: Research Papers in Economics (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Social Sciences › Business, Management and Accounting › Organizational Behavior and Human Resource Management › Corporate Management and Leadership
- Social Sciences › Business, Management and Accounting › Management of Technology and Innovation › Digital Innovation in Industries
- Keywords
- digital transformation, Industry 4.0, change management, digital transformation model, digital road maps, manufacturing industry, digital transformation implementation, organizational change
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-12, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature. https://app.cochat.ai/papers/10.3390/su132312941
- The paper
- Bellantuono, N., Nuzzi, A., Pontrandolfo, P., & Scozzi, B. (2021). Digital Transformation Models for the I4.0 Transition: Lessons from the Change Management Literature. Sustainability. https://doi.org/10.3390/su132312941
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.


